Re: [Discuss-gnuradio] build error

[Nick Foster]

On Sun, 2010-10-24 at 11:35 -0400, Achilleas Anastasopoulos wrote:
> yes, i can run all the tests in the different example directories.
> 
> However i cannot find/run  grc
> 
> Achilleas
> 

GRC is now called gnuradio-companion due to a naming conflict with an
existing program.

--n

> On Sun, Oct 24, 2010 at 11:08 AM, Tom Rondeau <address@hidden> wrote:
> > On Sun, Oct 24, 2010 at 10:48 AM, Achilleas Anastasopoulos
> > <address@hidden> wrote:
> >> I am trying a new build from the source tree on fedora 12.
> >> Configure gives the result shown at the end of the email.
> >> Make and make check complete fine, but sudo make install
> >> completes with the message:
> >> *** Post-Install Message ***
> >> Warning: python could not find the gnuradio module.
> >> Make sure that /usr/local/lib64/python2.6/site-packages is in your 
> >> PYTHONPATH
> >>
> >> make[3]: Leaving directory `/home/anastas/gnuradio_trunk'
> >> make[2]: Leaving directory `/home/anastas/gnuradio_trunk'
> >> make[1]: Leaving directory `/home/anastas/gnuradio_trunk
> >>
> >> I know the PYTHONPATH is set appropriately, since I can import gnuradio
> >> from within python...
> >
> > If you can import gnuradio, can you also run GNU Radio applications?
> > This might be a misunderstanding during the install but not an actual
> > problem.
> >
> > Tom
> >
> >
> >
> >> Also grc is not installed in /usr/local/bin
> >>
> >> Any ideas,
> >> Achilleas
> >>
> >>
> >>
> >>
> >> '*********************************************************************
> >> The following components were skipped either because you asked not
> >> to build them or they didn't pass configuration checks:
> >>
> >> usrp2-firmware
> >>
> >> These components will not be built.
> >>
> >>
> >> *********************************************************************
> >> The following GNU Radio components have been successfully configured:
> >>
> >> config
> >> gruel
> >> gnuradio-core
> >> usrp
> >> usrp2
> >> gr-usrp
> >> gr-usrp2
> >> gr-msdd6000
> >> gr-audio-alsa
> >> gr-audio-oss
> >> gr-atsc
> >> gr-cvsd-vocoder
> >> gr-gpio
> >> gr-gsm-fr-vocoder
> >> gr-noaa
> >> gr-pager
> >> gr-radar-mono
> >> gr-radio-astronomy
> >> gr-trellis
> >> gr-video-sdl
> >> gr-wxgui
> >> gr-qtgui
> >> gr-sounder
> >> gr-utils
> >> gnuradio-examples
> >> grc
> >> docs
> >>
> >> You my now run the make command to build these components.
> >>
> >> *********************************************************************
> >> The following components were skipped either because you asked not
> >> to build them or they didn't pass configuration checks:
> >>
> >> gcell
> >> gr-gcell
> >> gr-audio-jack
> >> gr-audio-osx
> >> gr-audio-portaudio
> >> gr-audio-windows
> >> gr-comedi
> >>
> >> These components will not be built.
> >>
> >> Configured GNU Radio release v3.3.1git-92-gdd74b98a for build.
> >>
> >> _______________________________________________
> >> Discuss-gnuradio mailing list
> >> address@hidden
> >> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >>
> >
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio