discuss-gnuradio
[
Top
][
All Lists
]
Advanced
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
[Discuss-gnuradio] EEPROM Burning for WBX_NG
From
:
Sanjay Singh
Subject
:
[Discuss-gnuradio] EEPROM Burning for WBX_NG
Date
:
Thu, 2 Dec 2010 12:03:44 -0500
I have done complete new installation of Ubuntu 9.04 Jaunty and installed Binary packege of GNURADIO(3.2.2).
I have checked under usrpm folder usrp_dbid.py file. Following are the lines in the file
#
# Machine generated by gen_usrp_dbid.py from usrp_dbid.dat
# Do not edit by hand. All edits will be overwritten.
#
#
# USRP Daughterboard ID's
#
BASIC_TX = 0x0000
BASIC_RX = 0x0001
DBS_RX = 0x0002
TV_RX = 0x0003
FLEX_400_RX = 0x0004
FLEX_900_RX = 0x0005
FLEX_1200_RX = 0x0006
FLEX_2400_RX = 0x0007
FLEX_400_TX = 0x0008
FLEX_900_TX = 0x0009
FLEX_1200_TX = 0x000a
FLEX_2400_TX = 0x000b
TV_RX_REV_2 = 0x000c
DBS_RX_CLKMOD = 0x000d
LF_TX = 0x000e
LF_RX = 0x000f
FLEX_400_RX_MIMO_A = 0x0014
FLEX_900_RX_MIMO_A = 0x0015
FLEX_1200_RX_MIMO_A = 0x0016
FLEX_2400_RX_MIMO_A = 0x0017
FLEX_400_TX_MIMO_A = 0x0018
FLEX_900_TX_MIMO_A = 0x0019
FLEX_1200_TX_MIMO_A = 0x001a
FLEX_2400_TX_MIMO_A = 0x001b
FLEX_400_RX_MIMO_B = 0x0024
FLEX_900_RX_MIMO_B = 0x0025
FLEX_1200_RX_MIMO_B = 0x0026
FLEX_2400_RX_MIMO_B = 0x0027
FLEX_400_TX_MIMO_B = 0x0028
FLEX_900_TX_MIMO_B = 0x0029
FLEX_1200_TX_MIMO_B = 0x002a
FLEX_2400_TX_MIMO_B = 0x002b
FLEX_1800_RX = 0x0030
FLEX_1800_TX = 0x0031
FLEX_1800_RX_MIMO_A = 0x0032
FLEX_1800_TX_MIMO_A = 0x0033
FLEX_1800_RX_MIMO_B = 0x0034
FLEX_1800_TX_MIMO_B = 0x0035
TV_RX_REV_3 = 0x0040
DTT754 = 0x0041
DTT768 = 0x0042
WBX_LO_TX = 0x0050
WBX_LO_RX = 0x0051
XCVR2450_TX = 0x0060
XCVR2450_RX = 0x0061
EXPERIMENTAL_TX = 0xfffe
EXPERIMENTAL_RX = 0xffff
Can any one tell me why wbx_ng daughterbord ID is missing.
Thanks in advance
Regards
Sanjay
reply via email to
[Prev in Thread]
Current Thread
[
Next in Thread
]
[Discuss-gnuradio] EEPROM Burning for WBX_NG
,
Sanjay Singh
<=
Re: [Discuss-gnuradio] EEPROM Burning for WBX_NG
,
Jason Abele
,
2010/12/02
Re: [Discuss-gnuradio] EEPROM Burning for WBX_NG
,
Sanjay Singh
,
2010/12/02
Re: [Discuss-gnuradio] EEPROM Burning for WBX_NG
,
Marcus D. Leech
,
2010/12/03
Re: [Discuss-gnuradio] EEPROM Burning for WBX_NG
,
Sanjay Singh
,
2010/12/03
Re: [Discuss-gnuradio] EEPROM Burning for WBX_NG
,
Sanjay Singh
,
2010/12/03
Re: [Discuss-gnuradio] EEPROM Burning for WBX_NG
,
Marcus D. Leech
,
2010/12/03
Prev by Date:
[Discuss-gnuradio] Re: ofdm decoder problem on USRP2
Next by Date:
Re: [Discuss-gnuradio] Invalid EEPROM error message with the WBX board
Previous by thread:
[Discuss-gnuradio] Invalid EEPROM error message with the WBX board
Next by thread:
Re: [Discuss-gnuradio] EEPROM Burning for WBX_NG
Index(es):
Date
Thread