Re: [Discuss-gnuradio] cannot ping my USRP2

[Tobias Schmid]

Hello Josh,

we don't have the required converter at the institute. Is there any other way 
to get the desired information from the USRP2?

As I wrote yesterday the behavior is the same with the older firmware version.

Thanks,
Tobias
-----Ursprüngliche Nachricht-----
Von: "Josh Blum" <address@hidden>
Gesendet: 14.12.2010 18:54:06
An: address@hidden
Betreff: Re: [Discuss-gnuradio] cannot ping my USRP2

>
>
>On 12/14/2010 09:39 AM, Tobias Schmid wrote:
>> Hello,
>> 
>> our institute owns 4 USRP2. Three of them can be pinged.
>> The 4th one cannot.
>> It's neither possible to use it with UHD firmware and FPGA image.
>> If I try uhd_find_device no device is found.
>> The firmware and the FPGA image on the SD card is working fine.
>> I checked this using one of my other devices.
>> 
>> Can someone tell me, what the problem might be?
>> Is it demaged? Is the eeprom demaged?
>> Or can I solve this problem on my own?
>> 
>
>What LEDs light up upon power on? D and F?
>
>Can you attach a serial terminal to the rear and tell me what the USRP2
>prints to the terminal at power up?
>http://www.ettus.com/uhd_docs/manual/html/usrp2.html#debugging-networking-problems
>
>Can you try an older image set and tell me if the behavior is the same?
>http://www.ettus.com/downloads/uhd_images/UHD-images-0000.20100901003255.b5461fc/
>
>Thanks,
>-Josh
>
>_______________________________________________
>Discuss-gnuradio mailing list
>address@hidden
>http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
___________________________________________________________
GRATIS! Movie-FLAT mit über 300 Videos. 
Jetzt freischalten unter http://movieflat.web.de