[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] FPGA and Firmware of USRP2
From: |
Josh Blum |
Subject: |
Re: [Discuss-gnuradio] FPGA and Firmware of USRP2 |
Date: |
Mon, 27 Dec 2010 01:31:06 -0800 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.13) Gecko/20101208 Lightning/1.0b2 Thunderbird/3.1.7 |
On 12/27/2010 12:39 AM, 陈敏 wrote:
> Dear all,I have downloaded the fpga code of USRP2 from:
> git://ettus.sourcerepo.com/ettus/uhd.git and compile with ISE10.1
> like this: cd uhd\fpga\usrp2\top\u2_rev3 make but the output file in
> uhd\fpga\usrp2\top\u2_rev3\build is 0 byte.Is there anything else I
you need to do "make bin"
also, ise10 may not build a working bin file. 12 is recommended.
> sould do?Is there any difference between the fpga code with the code
> from: git://git.ettus.com/ettus/fpga.git I noted that two binary
> files should be burned into the SD card,a FPGA image and a firmware
> image.Can anyone tell me where the firmware image is compiled from?
prebuilt images can be found here:
http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Downloads
they are built from the uhd.git repo
-josh