Re: [Discuss-gnuradio] UHD last in git unable to recv

[Josh Blum]

Its fine, just see the --help before running. And thanks for the patch.

-Josh

On 06/20/2011 05:29 AM, Gaetano Mendola wrote:
> Hi all,
> I got last version from git compiled and installed, installed the
> images UHD-images-003.001.002.tar.gz
> as well. The device is a USRP N210 with a WBX.
> 
> It seems now the device is unable to receive any data, the
> benchmark_rate example gives
> 
> ./benchmark_rate
> linux; GNU C++ version 4.4.3; Boost_104000; UHD_003.001.002-bc87971
> 
> 
> Creating the usrp device with: ...
> -- Opening a USRP2/N-Series device...
> -- Current recv frame size: 1472 bytes
> -- Current send frame size: 1472 bytes
> -- mboard0 is MIMO master
> Using Device: Single USRP:
>   Device: USRP2/N Series device
>   Mboard 0: USRP-N210 mboard
>   RX Channel: 0
>     RX DSP: USRP-N210 ddc0
>     RX Dboard: USRP-N210 dboard (rx unit)
>     RX Subdev: WBX RX + Simple GDB
>   TX Channel: 0
>     TX DSP: USRP-N210 duc0
>     TX Dboard: USRP-N210 dboard (tx unit)
>     TX Subdev: WBX TX + Simple GDB
> 
> 
> Benchmark rate summary:
>   Num received samples:    0
>   Num dropped samples:     0
>   Num overflows detected:  0
>   Num transmitted samples: 0
>   Num sequence errors:     0
>   Num underflows detected: 0
> 
> 
> Done!
> 
> 
> I have also noticed that the led "B" now is on, is it normal ?
> 
> Regards
> Gaetano
>