Re: [Discuss-gnuradio] Yet another uhd_find_devices does not find usrp2 and no ping from 192.168.10.2

[Nemanja Trecakov]

To find which devices are present at the system, this command is also helpful:

'sudo fdisk -l'

If you run the command before and after you sett in the card, it is usually easy to find out which device the card is.

> Date: Wed, 13 Jul 2011 18:03:03 -0400
> From: address@hidden
> To: address@hidden
> CC: address@hidden
> Subject: Re: [Discuss-gnuradio] Yet another uhd_find_devices does not find usrp2 and no ping from 192.168.10.2
>
> On 07/13/2011 05:51 PM, Jim Simpson wrote:
> > Thanks. That makes sense.
> >
> > When I call usrp2_card_burner_gui.py it only finds one device "/dev/sda2"
> > I'm pretty sure that that is where windows resides.
> >
> > Is there any way to force the GUI to find the SD card?
> > Is there any way to confirm that what it finds is the SD card?
> >
> > Thanks!
> > Jim
> Where it says Raw device: you can enter any device name you want
>
> I always use 'dmesg' to confirm the device assignment, right after I
> plug in the SD card.
>
>
>
>
> --
> Principal Investigator
> Shirleys Bay Radio Astronomy Consortium
> http://www.sbrac.org
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio