[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] io_type configuration for uhd.single_usrp_source
From: |
Josh Blum |
Subject: |
Re: [Discuss-gnuradio] io_type configuration for uhd.single_usrp_source |
Date: |
Thu, 21 Jul 2011 09:11:52 -0700 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.18) Gecko/20110617 Lightning/1.0b2 Thunderbird/3.1.11 |
On 07/21/2011 08:28 AM, Yan Nie wrote:
>> well, sizeof(complex<short>) == sizeof(float), which means gnuradio will
>> let you connect those blocks, but that definitively wont work.
>>
>> For the UHD source, use COMPLEX_FLOAT32. For the FIR filter, use complex
>> input.
>>
>> gnuradio-companion might help you a lot:
>> http://en.wikipedia.org/wiki/GNU_Radio_Companion
>
> I appreciate your reply. I changed the io type for UHD source and type of the
> input for FIR filter, and got them matched, which leads the final result to
> the right direction, but still not quite right. It is just a simple trial to
> detect a 100kHz sinusoid signal and down convert the frequency to 1kHz. I am
> expecting a 1kHz sinusoid wave from plotting, but it only gave some irregular
> oscillation at the beginning. I am still confused that what could be the
> problem here?
>
I strongly suggest that you first experiment with the FIR filter using
gnuradio companion. You can do 100% simulation (signal source, noise
source), no hardware required.
-josh