Re: [Discuss-gnuradio] RuntimeError: No USRPs found on interface eth0

[Nick Foster]

On Fri, 2011-07-22 at 18:14 -0500, vivek thotla wrote:
> Hello Nick,
> 
> I uninstalled everything and was going through the build guide to
> install gnuradio and I got this error this time:
> 
> ./bootstrap
> ./bootstrap: 25: aclocal: not found
> ./bootstrap: 26: autoconf: not found
> ./bootstrap: 27: autoheader: not found
> ./bootstrap: 28: libtoolize: not found
> ./bootstrap: 29: automake: not found
> ./bootstrap: 25: aclocal: not found
> ./bootstrap: 26: autoconf: not found
> ./bootstrap: 27: autoheader: not found
> ./bootstrap: 29: automake: not found
> ./bootstrap: 26: aclocal: not found
> ./bootstrap: 27: autoconf: not found
> ./bootstrap: 28: autoheader: not found
> ./bootstrap: 29: libtoolize: not found
> ./bootstrap: 30: automake: not found
> 
> I could not solve this one, So I got another EEE PC, which dint have
> gnu radio before, I installed gnuradio in that and I got the same
> error as I mentioned in the first message.


sudo apt-get install automake autoconf libtool

--n

> 
> @Marcus: I did upgrade the firmware and fpga image on the SD Card. I
> used the the Raw Ethernet image for the FPGA and Raw Ethernet with WBX
> for the firmware. 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>  Fri, Jul 22, 2011 at 10:31 AM, Marcus D. Leech <address@hidden>
> wrote:
>         
>         On 22/07/2011 11:19 AM, vivek thotla wrote:
>                 Hello,
>                 
>                 I am using USRP2 with a EEE PC (1015PX) which has
>                 ubuntu 11.04 on it. Since the USRP2 communicates only
>                 gigabit, I bought a Linksys SE2800 Gigabit Ethernet
>                 switch and connected the USRP2 via the Ethernet Switch
>                 (The EEE PC does not have  a gigabit ethernet card). I
>                 switched on the USRP2 and I got the D and F led lights
>                 on after all the led lights flashing. I run the
>                 usrp2_fft.py program and I got this error:
>                 
>                 address@hidden:~# usrp2_fft.py
>                 Traceback (most recent call last):
>                  File "/usr/bin/usrp2_fft.py", line 273, in <module>
>                    main ()
>                  File "/usr/bin/usrp2_fft.py", line 269, in main
>                    app = stdgui2.stdapp(app_top_block, "USRP2 FFT",
>                 nstatus=1)
>                  File
>                 "/usr/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", 
> line 36, in __init__
>                    wx.App.__init__ (self, redirect=False)
>                  File
>                 
> "/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/wx/_core.py", line 
> 7978, in __init__
>                    self._BootstrapApp()
>                  File
>                 
> "/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/wx/_core.py", line 
> 7552, in _BootstrapApp
>                    return _core_.PyApp__BootstrapApp(*args, **kwargs)
>                  File
>                 "/usr/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", 
> line 39, in OnInit
>                    frame = stdframe (self.top_block_maker, self.title,
>                 self._nstatus)
>                  File
>                 "/usr/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", 
> line 60, in __init__
>                    self.panel = stdpanel (self, self, top_block_maker)
>                  File
>                 "/usr/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", 
> line 81, in __init__
>                    self.top_block = top_block_maker (frame, self,
>                 vbox, sys.argv)
>                  File "/usr/bin/usrp2_fft.py", line 70, in __init__
>                    self.u = usrp2.source_32fc(options.interface,
>                 options.mac_addr)
>                  File
>                 "/usr/lib/python2.7/dist-packages/gnuradio/usrp2.py",
>                 line 679, in source_32fc
>                    return _usrp2.source_32fc(ifc, mac)
>                 RuntimeError: No USRPs found on interface eth0
>                 
>                 Then I tried to ping the usrp2 by connecting it to my
>                 laptop which has a gigabit ethernet, but I don't get
>                 any response from it. The request is timed-out
>                 everytime. I also tried all the solutions possible
>                 from the list, nothing works for me.
>                 
>                 Please Help.
>                 
>         If you're running with the as-shipped firmware on the USRP2,
>         you won't be able to ping it, since the "classic" firmware
>         doesn't
>          support IP at all.
>         
>         If you're just starting out, and have no investment in
>         existing "classic" API stuff, then I *strongly* recommend
>         upgrading your
>          "world" to UHD.
>         
>         
>         
>         
> 
> 
> 
> -- 
> Vivek Thotla
> Doctor of Philosophy (PhD)
> Graduate Research Assistant
> Intelligent Management Systems - Engineering Research Lab
> Electrical Engineering Department
> Missouri University of Science and Technology
> 
> Core Team/Programmer/Cheif Editor/Administration: The En?gma Project
> Team En?gma
> Website: www.enigmaportal.com
> 
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio