[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Transmitting additional data from N210 to the PC

From: Josh Blum
Subject: Re: [Discuss-gnuradio] Transmitting additional data from N210 to the PC
Date: Mon, 05 Sep 2011 00:55:24 -0700
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv: Gecko/20110805 Lightning/1.0b2 Thunderbird/3.1.12

On 09/04/2011 11:18 PM, Eral Tuerkyilmaz wrote:
> Hi,
> I want to change my USRP N210 - FPGA config to calculate a correlation
> sum and transmit this sum synchronously with the I/Q sample pairs to the
> PC (e.g to get this samples from an extra channel on the UHD block).
> What would be the easiest way to transmit these additional data to the
> samples and where are changes necessary (firmware, fpga-config)?

You may want to replace the second DSP in the top level verilog with
your own module. On the host side, just configure the uhd source block
for two channels.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]