[Discuss-gnuradio] DBSRX Error in Latest GR+UHD

[Dan CaJacob]

I have a USRP1 with a WBX and a DBSRX installed.  Everything worked fine 
with the gr-3.3.0-rc3 and even several months ago when I started using 
Marcus Leech's script.  But lately (within the past few weeks) when 
building the latest GR+UHD (with ML's script), if I run a flowgrpah that 
uses the DBSRX or uhd_usrp_probe, I get an error message like the one 
below.  Does anyone know why this might be occurring?  Apologies if this 
is better suited for the USRP USers group.

address@hidden:~$ uhd_usrp_probe
linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.004.000-dac9a50

-- Loading firmware image: /usr/local/share/uhd/images/usrp1_fw.ihx... done
-- Opening a USRP1 device...
-- Loading FPGA image: /usr/local/share/uhd/images/usrp1_fpga.rbf... done
-- Using FPGA clock rate of 64.000000MHz...

UHD Warning:
    DBSRX: Tuning exceeded vco range, _max2118_write_regs.osc_band == 0

UHD Error:
    The daughterboard manager encountered a recoverable error in init
    AssertionError: _max2118_read_regs.adc != 0
      in double dbsrx::set_lo_freq(double)
      at /home/spacequest/uhd/host/lib/usrp/dboard/db_dbsrx.cpp:370
Error: RuntimeError: Cannot create! Property already exists at: 
/mboards/0/dboards/B/rx_frontends/0/name

System is Ubuntu 11.04 x86 on a Mac Book Pro.