Re: [Discuss-gnuradio] LFTX Rev 2.2 Compatibility Issue with USRP2

[juancolon]

Marcus,

This is the output:

linux; GNU C++ version 4.4.3; Boost_104000; UHD_003.004.002-0-g7f44d838

-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes

UHD Warning:
    Unable to set the thread priority. Performance may be negatively
affected.
    Please see the general application notes in the manual for instructions.
    EnvironmentError: OSError: error in pthread_setschedparam
  _____________________________________________________
 /
|       Device: USRP2 / N-Series Device
|     _____________________________________________________
|    /
|   |       Mboard: USRP2-REV4
|   |   hardware: 1024
|   |   mac-addr: 00:50:c2:85:36:70
|   |   ip-addr: 192.168.10.2
|   |   gpsdo: none
|   |   serial: 1648
|   |   
|   |   Time sources: none, external, _external_, mimo
|   |   Clock sources: internal, external, mimo
|   |   Sensors: mimo_locked, ref_locked
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 0
|   |   |   Freq range: -50.000 to 50.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 1
|   |   |   Freq range: -50.000 to 50.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: A
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Subdev: 0
|   |   |   |   Name: Unknown (0xffff) - 0
|   |   |   |   Antennas: 
|   |   |   |   Sensors: 
|   |   |   |   Freq range: 0.000 to 0.000 Mhz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: A
|   |   |   |   Name: ltc2284
|   |   |   |   Gain Elements: None
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 0
|   |   |   Freq range: -250.000 to 250.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: A
|   |   |   ID: LF TX (0x000e)
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Subdev: AB
|   |   |   |   Name: LF TX (0x000e) - AB
|   |   |   |   Antennas: 
|   |   |   |   Sensors: 
|   |   |   |   Freq range: -32.000 to 32.000 Mhz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Subdev: BA
|   |   |   |   Name: LF TX (0x000e) - BA
|   |   |   |   Antennas: 
|   |   |   |   Sensors: 
|   |   |   |   Freq range: -32.000 to 32.000 Mhz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: QI
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Subdev: A
|   |   |   |   Name: LF TX (0x000e) - A
|   |   |   |   Antennas: 
|   |   |   |   Sensors: 
|   |   |   |   Freq range: -32.000 to 32.000 Mhz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: I
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Subdev: B
|   |   |   |   Name: LF TX (0x000e) - B
|   |   |   |   Antennas: 
|   |   |   |   Sensors: 
|   |   |   |   Freq range: -32.000 to 32.000 Mhz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: Q
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: A
|   |   |   |   Name: ad9777
|   |   |   |   Gain Elements: None

-- 
View this message in context: 
http://old.nabble.com/LFTX-Rev-2.2-Compatibility-Issue-with-USRP2-tp34044804p34048534.html
Sent from the GnuRadio mailing list archive at Nabble.com.