[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] stream data from two DBSRX's on USRP1 with uhd_rx
Re: [Discuss-gnuradio] stream data from two DBSRX's on USRP1 with uhd_rx_cfile?
Thu, 2 Aug 2012 21:01:26 +0800 (SGT)
Previous versions of gnuradio had
one "multi_file.py" example which dumps data from two basic_rx daughter
boards. You can get that one and change the driver to uhd.
Easier method is the one that Martin mentioned, use GRC and fill "Subdev Spec" with your spec.
From: Randall Wayth <address@hidden>
Sent: Thursday, 2 August 2012 2:26 PM
Subject: [Discuss-gnuradio] stream data from two DBSRX's on USRP1 with uhd_rx_cfile?
I have a USRP1 with two DBSRX2 daughterboards installed. I want to stream the signals from both boards to file. I haven't been able to specify both boards using uhd_rx_cfile. I've tried a few combinations to specify both boards using something like --spec="A:0,B:0" to no avail. It should be possible to do this, right? Any suggestions?
Discuss-gnuradio mailing listaddress@hiddenhttps://lists.gnu.org/mailman/listinfo/discuss-gnuradio