[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] a question to make sure Tx and Rx start times w.r

From: Josh Blum
Subject: Re: [Discuss-gnuradio] a question to make sure Tx and Rx start times w.r.t. each other
Date: Sat, 22 Sep 2012 08:38:23 -0400
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:15.0) Gecko/20120827 Thunderbird/15.0

On 09/21/2012 10:06 AM, abdullah unutmaz wrote:
> Hi everybody,
> I have been trying to design a ionosonde with USRPs in my final year project.
> I am responsible for the signal processing part of the project. I will have 
> been
> using USRP1 untill hardware part, that is amplifier and antennas, is set up.
> I have been using another USRP1 & a PC to model an HF channel, and processing
> the delayed signal in my own PC. As far as I see in web site of Ettus 
> Research,
> http://files.ettus.com/uhd_docs/manual/html/usrp1.html , and several similar
> projects completed USRP2s are better to use for such a purpose.
> In processing of the received signal, the peak of the result of the 
> x-correlation
> must not even be different from the its actual instant as three micro seconds.
> That is why, I need to make sure if Tx and Rx starts working at the same 
> instant
> and perfectly synchronized, in other words , if they perform parallelly at 
> all?

In this link you can find an explanation of the stream tags used by the
USRP source and sink block and a demo application.


You can use stream tags to precisely time the transmission of samples
and to know precisely the time of received samples. The timing of
streams will require something more recent than USRP1


reply via email to

[Prev in Thread] Current Thread [Next in Thread]