[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Carrier sensing not working
From: |
usrp n210 |
Subject: |
[Discuss-gnuradio] Carrier sensing not working |
Date: |
Sat, 6 Oct 2012 21:47:30 -0400 |
Hello,I am using "carrier_sensed()" to detect the signal from other USRP.
However,carrier sensing always return false irrespective of signal from other usrp device.
I tried by increasing the gain(8 to 15),threshold (from 10 to 30) still carrier sensing is not working .
I also tested tunnel.py ,sensing in the same script also not working.
previously ping was not working by using tunnel.py so I added the sleep of 10 ms and ping starts working(this issue was discussed in forum and I got this 10ms magic number from forum ).
And also I changed the distance between USRP's also (from 10cm to 1m).
So can anybody provide me some pointers regarding the same that why carrier sensing is not working and what will be reason for this.
I am using
USRP2 : USRPN210 with daughterboard : XCVR2450
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] Carrier sensing not working,
usrp n210 <=