[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] GNU Radio on Zedboard
From: |
Andrew Back |
Subject: |
Re: [Discuss-gnuradio] GNU Radio on Zedboard |
Date: |
Tue, 26 Mar 2013 13:34:36 +0000 |
Hi Doug,
On 26 March 2013 13:29, Douglas Geiger <address@hidden> wrote:
> On Tue, Mar 26, 2013 at 3:51 AM, Sylvain Munaut <address@hidden> wrote:
>> Hi,
>>
>>
>>> Lately there have been several emails about installing GNU Radio on
>>> Raspberry Pi and other ARM platforms. I tried to get it installed on the
>>> Zedboard *ARMv7*, but I was unsuccessful, with the following error message:
>>
>> Just from you nick, I would think that the zedboard in question is a
>> paralella prototype ?
>
> Minor nit-pick: the Zedboard uses the Xilinx Zynq (dual ARM
> Cortex-A9). If you're curious about it, there is a website up at:
> http://www.zedboard.org/
The Parallella prototype hardware is a Zedboard + FMC with 16 or
64-core Epiphany floating-point coprocessor [1], which is what I
suspect what Sylvain meant in his reply to Tommy.
Best,
Andrew
[1] For a picture see:
http://www.embecosm.com/2013/03/22/community-access-parallella-prototype/
--
Andrew Back
http://carrierdetect.com