[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Run time FIFO error
|
From: |
Marcus D. Leech |
|
Subject: |
Re: [Discuss-gnuradio] Run time FIFO error |
|
Date: |
Wed, 12 Jun 2013 20:09:43 -0400 |
|
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.24) Gecko/20111108 Fedora/3.1.16-1.fc14 Thunderbird/3.1.16 |
On 06/12/2013 08:00 PM, Jay Prakash wrote:
Sry,
It's switch but not a dedicated one.
Sample rate 1M.
But error came even at 32k.
Jay Prakash
Well, 32K isn't a valid sample rate, Jay.
Sample rates have to be a proper integer fraction of the master clock
rate on the USRP device. For the N210, the minimum reasonable sample rate
is 250ksps.
Some switches are very poor at maintaining bulk traffic without dropping
packets.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
- [Discuss-gnuradio] Run time FIFO error, Jay Prakash, 2013/06/12
- Re: [Discuss-gnuradio] Run time FIFO error, Jay Prakash, 2013/06/12
- Re: [Discuss-gnuradio] Run time FIFO error, Jay Prakash, 2013/06/12
- Re: [Discuss-gnuradio] Run time FIFO error,
Marcus D. Leech <=
- Re: [Discuss-gnuradio] Run time FIFO error, Sean Nowlan, 2013/06/12
- Re: [Discuss-gnuradio] Run time FIFO error, Marcus D. Leech, 2013/06/12
- Re: [Discuss-gnuradio] Run time FIFO error, Sean Nowlan, 2013/06/12
- Re: [Discuss-gnuradio] Run time FIFO error, Karan Talasila, 2013/06/12
- Re: [Discuss-gnuradio] Run time FIFO error, Marcus D. Leech, 2013/06/12
Re: [Discuss-gnuradio] Run time FIFO error, Sean Nowlan, 2013/06/13