Re: [Discuss-gnuradio] Xlate FIR filter broken in gr 3.7

[Anton Komarov]

Ok, but it is not clear for me how to open a ticket in gr bug tracker...

On Wed, Aug 7, 2013 at 4:35 PM, Marcus Müller <address@hidden> wrote:

Yes, please attach it to your ticket.

Am 07.08.2013 14:28, schrieb Anton Komarov:

Marcus, am i supposed to share e.g. 10 seconds of captured spectrum so you can play with it on your side?

On Wed, Aug 7, 2013 at 4:18 PM, Marcus Müller <address@hidden> wrote:

Hi Anton,
it is really hard to capture apco25 signals in Germany.
Could you really open a ticket, attach a few captured samples saved using a file sink,
and the 3.6 and 3.7 flowgraphs; or provide some kind of test case with GNU Radio Signal sources
that simulate a signal. Be sure to attach screenshots of your waterfall plots.
It is really hard to guess what goes  wrong otherwise.

Greetings,
Marcus

Am 07.08.2013 13:56, schrieb Anton Komarov:

Ok, i've attached very simple grc chart 

with slider you can change the frequency, two waterfalls shows spectrums before and after xlating.

So i had test it in apco25 env and took apco signals as a reference. So when i saw signal e.g. at 451.378 MHz and tuned to it i saw no signal after xlating nevertheless it was the same time on waterfall before xlating.

You can test this chart with you radio environment.

Then i testing the same logic with gr 3.6 (code is not compatible i have to redraw it..) and here it is! xlating worked like a charm.

On Wed, Aug 7, 2013 at 1:48 PM, Martin Braun (CEL) <address@hidden> wrote:

On Wed, Aug 07, 2013 at 01:00:32PM +0400, Anton Komarov wrote:
> Hi, made an attempt to test my python scripts with new 3.7.0 of GR
>
> and what i am seeing xlate fir filter is broken
>
>
> previously xlate worked perfect with 3.6 version
>
>
> tested with waterfalls and i see wrong xlating
>
> i think developers should pay attention to this issue

Hi Anton,

can you please elaborate on this bug. Ideally, could you post an issue
on our tracker: http://gnuradio.org/redmine/projects/gnuradio/issues

Specify what you configured, what the expected outcome was and what
happened instead.

Thanks,
MB

--
Karlsruhe Institute of Technology (KIT)
Communications Engineering Lab (CEL)

Dipl.-Ing. Martin Braun
Research Associate

Kaiserstraße 12
Building 05.01
76131 Karlsruhe

Phone: +49 721 608-43790
Fax: +49 721 608-46071
www.cel.kit.edu

KIT -- University of the State of Baden-Württemberg and
National Laboratory of the Helmholtz Association

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio