Re: [Discuss-gnuradio] [USRP-users] USRP N210 Signal Phase Issue

[Marcus D. Leech]

Try reducing the amplitude to 0.7.  Another possibility is that your computer can't keep up.  If you are using one of the standard programs, are there U's printing in the terminal?

Matt

Also, what RF gain are you setting?  Does it exceed the maximum input level of the spectrum analyser?

Are you connected directly, or with an antenna?

On Tue, Jan 7, 2014 at 3:03 PM, Jonathan Fox <address@hidden> wrote:

A colleague and I are sending a simple signal in GNU Radio (sine wave, 1 MHz, amplitude of 1) to the USRP sink and have the center frequency at 500 MHz. The N210 USRP is hooked up to an Agilent spectrum analyzer. On the analyzer we are seeing a weird phenomena every two seconds. At first we see the carrier frequency and two sidebands from the sine wave (see attached normal.gif). Then after two seconds we get two bursts of multiple harmonics (see odd.gif).

The question is, why is this happening? Does the phase of the 1 KHz signal become discontinuous before or after being sent to the USRP?

Thanks,

Jon Fox

_______________________________________________
USRP-users mailing list
address@hidden
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

-- 
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org