This is what I see in /var/log/messages when I plug it in.
Feb 16 10:19:56 debianvm kernel: [ 485.160978] usb 2-2.2: new
full-speed USB device number 6 using uhci_hcd
Feb 16 10:19:56 debianvm kernel: [ 485.432177] usb 2-2.2: New USB
device found, idVendor=04d8, idProduct=fb31
Feb 16 10:19:56 debianvm kernel: [ 485.432180] usb 2-2.2: New USB
device strings: Mfr=1, Product=2, SerialNumber=0
Feb 16 10:19:56 debianvm kernel: [ 485.432181] usb 2-2.2: Product:
FUNcube Dongle V2.0
Feb 16 10:19:56 debianvm kernel: [ 485.432182] usb 2-2.2: Manufacturer:
Hanlincrest Ltd.
Feb 16 10:19:56 debianvm kernel: [ 485.487344] 6:1:1: cannot get freq
at ep 0x81
Feb 16 10:19:56 debianvm kernel: [ 485.532651] generic-usb
0003:04D8:FB31.0003: hiddev0,hidraw1: USB HID v1.11 Device [Hanlincrest
Ltd. FUNcube Dongle V2.0 ] on usb-0000:02:00.0-2.2/input2
Feb 16 10:19:56 debianvm mtp-probe: checking bus 2, device 6:
"/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/2-2.2"
Feb 16 10:19:56 debianvm mtp-probe: bus: 2, device: 6 was not an MTP device
Thanks for looking at this.
Mike Harpe
On Sun, Feb 16, 2014 at 1:31 AM, Volker Schroer <address@hidden
<mailto:address@hidden>> wrote:
What do you see in your message log, when you connect the dongle to
your computer ?
-- Volker
Am 15.02.2014 21:30, schrieb Mike Harpe:
Hello! I've gotten GNU Radio 3.7.2.1 compiled and running. I have a
FunCube Dongle Pro Plus V2 that I received in the last week.
My environment is Debian wheezy running a generic kernel.
I am getting the following when I try to run the narrowband FM
example.
It has to do with the control part of the dongle. I tried the udev
change with no success. I am new to working with devices in udev
so I'm
sure that's the problem.
Here's what I get...
Showing: "/home/mike/fcd_nfm_rx.grc"
Generating: "/home/mike/fcd_nfm_rx.py"
Executing: "/home/mike/fcd_nfm_rx.py"
Using Volk machine: avx_64_mmx_orc
Funcube Dongle Pro+ found as: plughw:1,0
Traceback (most recent call last):
File "/home/mike/fcd_nfm_rx.py", line 405, in <module>
tb = fcd_nfm_rx()
File "/home/mike/fcd_nfm_rx.py", line 257, in __init__
self.fcdproplus_fcdproplus_0 = fcdproplus.fcdproplus("",1)
File
"/usr/local/lib/python2.7/__dist-packages/fcdproplus/__fcdproplus_swig.py",
line 103, in make
return _fcdproplus_swig.fcdproplus___make(device_name, unit)
RuntimeError: FunCube Dongle V2.0 soundcard found but not
controlpart.
Any help is appreciated.
Thank you!
Michael Harpe, N4PLE
Sellersburg, IN
_________________________________________________
Discuss-gnuradio mailing list
address@hidden <mailto:address@hidden>
https://lists.gnu.org/mailman/__listinfo/discuss-gnuradio
<https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>
_________________________________________________
Discuss-gnuradio mailing list
address@hidden <mailto:address@hidden>
https://lists.gnu.org/mailman/__listinfo/discuss-gnuradio
<https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>