discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] TX/RX caliberation utilities provided in UHD


From: Marcus Müller
Subject: Re: [Discuss-gnuradio] TX/RX caliberation utilities provided in UHD
Date: Wed, 23 Apr 2014 15:02:48 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0

Hi Gayathri,

this is not GNU Radio related -- UHD is ettus' driver framework for its USRPs and only *used* by gr-uhd.

Most of your questions are answered in the UHD users Manual, see the ettus website, http://code.ettus.com/redmine/ettus/projects/uhd/wiki
as well as in the man pages, usually available by invoking "man uhd_cal_rx_iq_balance" (or the other program names, respectively)

just to answer the easy questions here:

a) yes, the same utility is used.
b) see the man page, and, if you really want to know in detail, the source code. Basically, it measures TX leakage on the RX port.
c) no.
d) you'll get a problem when connecting to your device, I think. You can burn serial numbers, see the UHD manual. If you've bought hardware without a properly flashed EEPROM, *please* contact ettus.
e) see the manual, calibration page.

Greetings,
Marcus

On 04/22/2014 06:36 AM, Gayathri Ramasubramanian wrote:
Hi

I would be grateful if anyone could explain more about the TX/RX calibration
utilities provided by UHD:
        uhd_cal_rx_iq_balance:      uhd_cal_tx_dc_offset:        
uhd_cal_tx_iq_balance: 

 a) I found them installed in one of the UHD directories. Not sure now, but
wanted to know if the same version can be used on SBX and WBX
daughterboards. what changes in output should Ii expect to see.
How can I keep a note of it. are there any specific tests I can use.

b) What do these utilities exactly do. 
c) do they write into the fw of the motherboard. if so, how can i remove the
calibration if required.
d) what happens if a serial number is not present in the WBX boards. 
e) application notes says: it creates a CSV file. how will it be stored and
retrieved.

I am trying to use these utilities but before i do I just wanted to clear my
doubts.

Any help will be appreciated.

Thanks
Gayathri 




--
View this message in context: http://gnuradio.4.n7.nabble.com/TX-RX-caliberation-utilities-provided-in-UHD-tp47699.html
Sent from the GnuRadio mailing list archive at Nabble.com.

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio


reply via email to

[Prev in Thread] Current Thread [Next in Thread]