You seem to have an old, residual version installed. Can you search
for packets that start with uhd and verify you've only got things
installed that come from the ettus repo?
Also, after adding the repository, you most probably have to update
your package cache.
Greetings,
Marcus
On 05.05.2014 20:13, Greg Hulands
wrote:
I added the Ettus repo and installed 003.007.001 and yet when I run the uhd_find_devices command it shows the 003.005.003 version.
Do you recommend building from source?
Thanks,
Greg
On May 5, 2014, at 10:58 AM, Marcus D. Leech <address@hidden> wrote:
On 05/05/2014 01:52 PM, Greg Hulands wrote:
Hi,
I received my B210 this morning and when I run uhd_find_devices, it say it can't find any devices.
$ uhd_find_devices
linux; GNU C++ version 4.8.1; Boost_105300; UHD_003.005.003-0-unknown
No UHD Devices Found
lsusb shows the device, but the product id is different to what is in /lib/udev/rules.d/40-uhd-host.rules
Bus 003 Device 006: ID 2500:0020
So I added a line to the rules file
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2500", ATTRS{idProduct}=="0020", GROUP:="usrp", MODE:="0660"
I reloaded udev, unplugged and replugged in the device, but still uhd_find_devices can't locate it.
I have the B210 plugged into a Via VL800 USB 3.0 card. lspci identifies it as Device 3483 (rev 01).
What step am i missing?
Thanks,
Greg
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
You need to most recent version of UHD. Support for B210 was introduced at 3.5.4 of UHD, and if you're going to upgrade, you should upgrade to
the latest.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
|