discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Questions on stream tags


From: Martin Braun
Subject: Re: [Discuss-gnuradio] Questions on stream tags
Date: Wed, 07 May 2014 09:42:22 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0

On 06.05.2014 12:18, Hoang Ngo Khac wrote:
Sorry, I didn't really get what you meant by "pipe the tagged stream
straight into the uhd sink".

If you put tagged streams into the UHD sink it'll understand that (and add eob automatically).

M



On Tue, May 6, 2014 at 2:36 PM, Martin Braun <address@hidden
<mailto:address@hidden>> wrote:

    On 06.05.2014 04:44, Hoang Ngo Khac wrote:

        Hi Martin, and all,

        I meant, I want to add tx_sob and tx_eob to tell the USRP Sink to
        start/stop the TX chain. I intend to add tags before the modulation,
        where data type is /byte. /Since the provided block PDU to
        Tagged Stream

        takes message as input, I guess I need to make my own block(s).


    On current master, you can also pipe the tagged stream straight into
    the uhd sink.

    M


        On Mon, May 5, 2014 at 7:57 PM, Martin Braun
        <address@hidden <mailto:address@hidden>
        <mailto:address@hidden
        <mailto:address@hidden>__>> wrote:

             On 05.05.2014 09:56, Hoang Ngo Khac wrote:

                 Dear List,

                 I'm new to stream tags. Could someone help me to understand
                 about stream
                 tags and know how to use it?


             Remember that we have a lot tag debugging tools available,
        such as
             the QT GUI Time Sink and tag debug.


                 1. In GNU Radio Manual: "A stream tags is generated by
        a block's
                 work
                 function and from there on flows the downstream...*until it
                 reaches a
                 sink*...".

                 If we use tags to tell the USRP Sink to start/stop the
        TX chain,
                 do we
                 need to modify the USRP Sink block?


             Probably not... are you talking about tx_sob and tx_eob?


                 I found that gr_uhd_usrp_sink.cc file contains the
                 get_tags_in_range()
                 function. However, this file is not, at first, in the
        GNU Radio
                 3.7.0
                 source folder. How to add this to project and make it
        work with
                 USRP Sink?


             Look in gr-uhd/, there it is.


                 2. I am implementing a model of ofdm-based two-way
        relaying network
                 apply network coding. Up to now, each single
        transmission in one
                 time
                 slot are done, but the model runs without any timing
                 synchronization.
                 For this, I need to use TDMA, and stream tags is the
        solution. I
                 list
                 here the steps to make TDMA with stream tags. Could you
        leave some
                 comments if I miss some thing?
                 + Add tags to stream; using provided block such as PDU
        to Tagged
                 Stream,
                 or custom block.
                 + Write a block for error checking, repeat request...


             Seems right. You shouldn't need other blocks to control UHD.

             M


             ___________________________________________________
             Discuss-gnuradio mailing list
        address@hidden <mailto:address@hidden>
        <mailto:address@hidden
        <mailto:address@hidden>>
        https://lists.gnu.org/mailman/____listinfo/discuss-gnuradio
        <https://lists.gnu.org/mailman/__listinfo/discuss-gnuradio>

        <https://lists.gnu.org/__mailman/listinfo/discuss-__gnuradio
        <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>>




    _________________________________________________
    Discuss-gnuradio mailing list
    address@hidden <mailto:address@hidden>
    https://lists.gnu.org/mailman/__listinfo/discuss-gnuradio
    <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>






reply via email to

[Prev in Thread] Current Thread [Next in Thread]