|
From: | Ben Hilburn |
Subject: | Re: [Discuss-gnuradio] Live DVD & X310 |
Date: | Mon, 30 Jun 2014 12:31:46 -0700 |
Did you power-cycle the device after updating the firmware? The contents of flash are loaded into the FPGA on a reset, which happensOn 06/29/2014 08:51 AM, David Miller wrote:
Hi,
So I boot off of the Live DVD (3.7.4), and try GRC with an X310 and get an error about the firmware version being 3, when 4 was expected.
I then use usrp_x3xx_fpga_burner to update the firmware, which after a few minutes of updating, I still get the same error with GRC?
What am I doing wrong, is there a different firmware update required, or is the DVD version wrong, please?
Thanks,
David
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
at power-cycle, just like N2xx as far as I know.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |