Dose any one know what is the problem with this
device.
Hardware NI USRP 2940R = x310
OS Ubuntu 14.04LTS
Connection SFP0
what are these warnings
X300 unknown product code in EEPROM: 2104
RX
dboard ID: Unknown (0xffff)
./usrp_burn_mb_eeprom
--read-all
linux;
GNU C++ version 4.8.2; Boost_105400;
UHD_003.008.002-80-ge28d7844
Creating
USRP device from address:
UHD
Warning:
X300 unknown product code in EEPROM: 2104
UHD
Warning:
X300 unknown product code in EEPROM: 2104
--
X300 initialization sequence...
--
Determining maximum frame size... 1472 bytes.
--
Setup basic communication...
--
Loading values from EEPROM...
UHD
Warning:
X300 unknown product
code in EEPROM: 2104
--
Setup RF frontend clocking...
--
Radio 1x clock:200
--
Initialize Radio control...
--
Performing register loopback test... pass
UHD
Warning:
Unknown transceiver board ID combination.
Is your daughter-board mounted properly?
RX dboard ID:
Unknown (0xffff)
TX dboard ID: WBX v4 (0x0062)
--
Performing register loopback test... pass
UHD
Warning:
Unknown transceiver board ID combination.
Is your daughter-board mounted properly?
RX dboard
ID: Unknown (0xffff)
TX dboard ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 +
Simple GDB, WBX-120 + Simple GDB (0x004f)
--
Initializing clock and time using internal sources... done
Fetching
current settings from EEPROM...
EEPROM ["revision"] is "52"
EEPROM ["product"] is "2104"
EEPROM ["mac-addr0"] is "00:80:2f:0a:f5:0c"
EEPROM ["mac-addr1"] is "10:80:2f:0a:f5:0d"
EEPROM ["gateway"] is "192.168.10.1"
EEPROM ["ip-addr0"] is "192.168.10.2"
EEPROM ["subnet0"] is "255.255.255.0"
EEPROM ["ip-addr1"] is "192.168.20.2"
EEPROM ["subnet1"] is "255.255.255.0"
EEPROM ["ip-addr2"] is "192.168.30.2"
EEPROM ["subnet2"] is "255.255.255.0"
EEPROM ["ip-addr3"] is "192.168.40.2"
EEPROM ["subnet3"] is "255.255.255.0"
EEPROM ["serial"] is "F54E25"
EEPROM ["name"] is ""