|Subject:||Re: [Discuss-gnuradio] Transmission issue in USRP N210|
|Date:||Tue, 07 Apr 2015 15:10:20 +0200|
|User-agent:||Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.6.0|
The other Marcus here, I was the one that said something about the
If your N210's transmit LED is not on, then openBTS simply did not instruct the USRP to send samples.
Thus, you will have to fix the problem on openBTS side. I'm pretty sure we went through all the diagnostics that made sense, and your USRP and UHD are working fine.
On 04/07/2015 02:56 PM, Zamrath Nizam wrote:
Hi Marcus,Can you ping the N210?Yes. "ping 192.168.10.2" works fine.If you use: uhd_usrp_probe --args addr=192.168.10.2, What happens?"uhd_usrp_probe" also works fine. Couldn't check with --args. I am away from the board now for few hours. Until then...Is your ethernet interface configured for 192.168.10.1 ?Yes. Configured statically in "/etc/network/interfaces" file. Thanks, Zamrath Nizam On Tue, Apr 7, 2015 at 6:13 PM, Marcus D. Leech <address@hidden> wrote:On 04/07/2015 08:14 AM, Zamrath Nizam wrote: Hi all, I have recently installed openbts-2.8 on a banana-pi (Processor: armv7) board to work with USRP N210. Had all the pre-requisite installations and procedures been done, I noticed that, the transmitter is not working. Though this issue seems to be related with openbts but since they are not responding, I would like to have some suggestions from you to resolve this issue. In a previous thread 'Marcus' has stated that LED A is not working because openbts is not talking to USRP. i.e. USRP is not configured to receive samples. Is he pointing to a receiving issue (probably I was looking for a transmission issue) or am I the one who is confused? Can anyone please shed some light on this. Thank you. Best, Zamrath Nizam _______________________________________________ Discuss-gnuradio mailing address@hidden://lists.gnu.org/mailman/listinfo/discuss-gnuradio Can you ping the N210? If you use: uhd_usrp_probe --args addr=192.168.10.2 What happens? Is your ethernet interface configured for 192.168.10.1 ? _______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
|[Prev in Thread]||Current Thread||[Next in Thread]|