[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnurad
From: |
Jaeho |
Subject: |
Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1 |
Date: |
Tue, 4 Aug 2015 17:15:42 -0700 (MST) |
Thank you for your advice.
but i think, your advice is for about old version gr-ieee802_15_4 which name
was UCLA Zigbee PHY.
it supported only until gnuradio version 3.5, and i am now using gnuradio
version 3.7.
so i downloaded new version of gr-ieee802_15_4, it's way to install is as
below
git clone git://github.com/bastibl/gr-ieee802-15-4.git
cd gr-ieee802-15-4
mkdir build
cd build
cmake ..
make
sudo make install
sudo ldconfig
so i already run it, and installed with any error message.
so, i hope ask one more, same question with additional question.
the figure that i insert as below, some files has comment that "compile on
mac"
is this comments mean that those file works on only Apple Mac? or mean MAC
layer?
<http://gnuradio.4.n7.nabble.com/file/n55259/mac.png>
=========================================================
i am sorry, i have more question about your advice.
1. i opened ieee802_15_4_OQPSK_PHY.grc and transceiver_OQPSK.grc.
<http://gnuradio.4.n7.nabble.com/file/n55259/Screenshot_from_2015-08-05_00_43_00.png>
<http://gnuradio.4.n7.nabble.com/file/n55259/Screenshot_from_2015-08-05_00_43_10.png>
like this images, there are some missing blocks. i guessed these blocks came
from gr-foo.
But i installed gr-foo following install instruction in git main page and
there were no error messages during install processing.
please give me advice what can i do? what is the problem of this situation?
2. Actually, i generated python files (ieee802_15_4_oqpsk_phy.py and
transceiver_oqpsk.py) from .grc files, using F5(hot key), although there are
some error. But i could not find any hints from these python code to replace
my old code, which is /*self.packet_transmitter =
ieee802_15_4_pkt.ieee802_15_4_mod_pkts(self, spb=self._spb, msgq_limit=2).*/
Can you give me some more hints or advice to solve it?
========================================================
--
View this message in context:
http://gnuradio.4.n7.nabble.com/gnuradio-core-missing-UCLA-Zigbee-PHY-in-gnuradio-version-3-6-5-1-tp55093p55259.html
Sent from the GnuRadio mailing list archive at Nabble.com.
- Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1, Jaeho, 2015/08/01
- Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1, Marcus Müller, 2015/08/01
- Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1, Jaeho, 2015/08/04
- Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1, Jeon, 2015/08/04
- Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1,
Jaeho <=
- Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1, Jeon, 2015/08/04
- Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1, Bastian Bloessl, 2015/08/05
- Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1, Jaeho, 2015/08/10
- Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1, Bastian Bloessl, 2015/08/10