Re: [Discuss-gnuradio] gnuradio-core missing / UCLA Zigbee PHY in gnuradio version 3.6.5.1

[Jeon]

No, it's not the old one.

If you installed gr-ieee802-15-4 successfully, with the commands following:

    git clone https://github.com/bastibl/gr-ieee802-15-4

    cd gr-ieee802-15-4

    mkdir build

    cd build

    cmake ..

    make

    [sudo] make install

    [sudo] ldconfig

you should be able to see lots of blocks in IEEE802.15.4 category:

But in your case, you have only two blocks which are generated from hierarchy blocks.

Which are not present in my case since I didn't build hierarchy block, yet.

So, my suggestion is, double check whether intallation is successful or not.

Regards,

Jeon.

​

2015-08-05 9:15 GMT+09:00 Jaeho <address@hidden>:

Thank you for your advice.

but i think, your advice is for about old version gr-ieee802_15_4 which name
was UCLA Zigbee PHY.

it supported only until gnuradio version 3.5, and i am now using gnuradio
version 3.7.

so i downloaded new version of gr-ieee802_15_4, it's way to install is as
below

git clone git://github.com/bastibl/gr-ieee802-15-4.git
cd gr-ieee802-15-4
mkdir build
cd build
cmake ..
make
sudo make install
sudo ldconfig

so i already run it, and installed with any error message.

so, i hope ask one more, same question with additional question.

the figure that i insert as below, some files has comment that "compile on
mac"

is this comments mean that those file works on only Apple Mac? or mean MAC
layer?

<http://gnuradio.4.n7.nabble.com/file/n55259/mac.png>

=========================================================
i am sorry, i have more question about your advice.

1. i opened ieee802_15_4_OQPSK_PHY.grc and transceiver_OQPSK.grc.
<http://gnuradio.4.n7.nabble.com/file/n55259/Screenshot_from_2015-08-05_00_43_00.png>
<http://gnuradio.4.n7.nabble.com/file/n55259/Screenshot_from_2015-08-05_00_43_10.png>

like this images, there are some missing blocks. i guessed these blocks came
from gr-foo.
But i installed gr-foo following install instruction in git main page and
there were no error messages during install processing.
please give me advice what can i do? what is the problem of this situation?

2. Actually, i generated python files (ieee802_15_4_oqpsk_phy.py and
transceiver_oqpsk.py) from .grc files, using F5(hot key), although there are
some error. But i could not find any hints from these python code to replace
my old code, which is /*self.packet_transmitter =
ieee802_15_4_pkt.ieee802_15_4_mod_pkts(self, spb=self._spb, msgq_limit=2).*/
Can you give me some more hints or advice to solve it?
========================================================



--
View this message in context: http://gnuradio.4.n7.nabble.com/gnuradio-core-missing-UCLA-Zigbee-PHY-in-gnuradio-version-3-6-5-1-tp55093p55259.html

Sent from the GnuRadio mailing list archive at Nabble.com.

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio