[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Accessing write_eo, write_io in GRC.
From: |
Martin Braun |
Subject: |
Re: [Discuss-gnuradio] Accessing write_eo, write_io in GRC. |
Date: |
Wed, 30 Sep 2015 17:11:14 -0700 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.8.0 |
Kathy,
those calls were libusrp calls, IIRC. This API was abandoned a long time
ago, and I'm not even sure myself what they exactly do.
You might be able to use set_gpio_attr(), but I can't tell you exactly
how the commands would look like.
M
On 29.09.2015 11:24, Kathy Hertzog wrote:
> Hi everyone!
> I have a GNURadio project running on Kubuntu 14.04 using GNURadio
> Companion v3.7.2.1 along with several OOT blocks that I wrote. (I know
> I'm a bit behind on the releases.) A lot of the code was originally
> written in v3.6 so some of what follows may be me conflating old
> interface with newer.
>
> I have custom hardware that uses Ettus USRP boards. I've been bypassing
> the custom front-end and just adjusting the expected center frequency on
> the UHD: USRP Source block but now I'd like to actually control the
> hardware. That means I'd like to access the write_eo() and write_io()
> calls so I can enable and initialize the output pins on the USRP and
> write to an external PLL LO for down conversion to set frequency.
>
> My 3.6-based code just called write_io from the usrp instance in C++ code.
>
> But I can't figure out how to get to the USRP write_eo and write_io
> calls from a 3.7.2.1 GNURadio Companion starting point. I've tried
> adding code to the Python output of GRC like this:
>
> ###
> self.u = uhd.usrp_source( device_addr="fpga=usrp1_fpga_4rx.rbf",
>
> stream_args=uhd.stream-args(cpu_format="fc32",
>
> channels=range(4),),)
>
> # I added this line to GNURadio Companion output code
> self.u.write_oe (1, 0xFFFF, 0xFFFF)
> ###
>
> but Python can't find the write_oe or write_io methods.
>
> Am I missing an import in Python? A path? Is there anyway to do this in
> the GRC blocks so I don't have to modify the output Python? Do I have to
> do this as an OOT block and call the uhd usrp make myself? (although I
> don't see the write_io or write_oe methods in usrp_source.h anymore)
>
> Thanks in advance,
> Kathy Hertzog
>
>
>
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>