This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by thrift configure 0.9.3, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --prefix=/usr/local --with-c_glib --with-cpp --with-libevent --with-python --without-csharp --without-d --without-erlang --without-go --without-haskell --without-java --without-lua --without-nodejs --without-perl --without-php --without-ruby --without-zlib --disable-tests --disable-tutorial CC=gcc CXX=g++ CXXFLAGS=-DNDEBUG ## --------- ## ## Platform. ## ## --------- ## hostname = jefe.eecs.umich.edu uname -m = x86_64 uname -r = 4.1.6-200.fc22.x86_64 uname -s = Linux uname -v = #1 SMP Mon Aug 17 19:54:31 UTC 2015 /usr/bin/uname -p = x86_64 /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/local/bin PATH: /usr/local/sbin PATH: /usr/bin PATH: /usr/sbin PATH: /bin PATH: /sbin PATH: /usr/local/bin PATH: /sbin PATH: /bin PATH: /usr/sbin PATH: /usr/bin PATH: /usr/lib64/qt4/bin PATH: /home/anastas/.local/bin PATH: /home/anastas/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:3123: checking for a BSD-compatible install configure:3191: result: /usr/bin/install -c configure:3202: checking whether build environment is sane configure:3257: result: yes configure:3408: checking for a thread-safe mkdir -p configure:3447: result: /usr/bin/mkdir -p configure:3454: checking for gawk configure:3470: found /usr/bin/gawk configure:3481: result: gawk configure:3492: checking whether make sets $(MAKE) configure:3514: result: yes configure:3543: checking whether make supports nested variables configure:3560: result: yes configure:3649: checking whether UID '1002' is supported by ustar format configure:3652: result: yes configure:3659: checking whether GID '1002' is supported by ustar format configure:3662: result: yes configure:3670: checking how to create a ustar tar archive configure:3681: tar --version tar (GNU tar) 1.28 Copyright (C) 2014 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later . This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by John Gilmore and Jay Fenlason. configure:3684: $? = 0 configure:3724: tardir=conftest.dir && eval tar --format=ustar -chf - "$tardir" >conftest.tar configure:3727: $? = 0 configure:3731: tar -xf - &5 gcc (GCC) 5.1.1 20150618 (Red Hat 5.1.1-4) Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4290: $? = 0 configure:4279: gcc -v >&5 Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/5.1.1/lto-wrapper Target: x86_64-redhat-linux Configured with: ../configure --enable-bootstrap --enable-languages=c,c++,objc,obj-c++,fortran,ada,go,lto --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-shared --enable-threads=posix --enable-checking=release --enable-multilib --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --with-linker-hash-style=gnu --enable-plugin --enable-initfini-array --disable-libgcj --with-default-libstdcxx-abi=c++98 --with-isl --enable-libmpx --enable-gnu-indirect-function --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux Thread model: posix gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) configure:4290: $? = 0 configure:4279: gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:4290: $? = 1 configure:4279: gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion' gcc: fatal error: no input files compilation terminated. configure:4290: $? = 1 configure:4310: checking whether the C compiler works configure:4332: gcc conftest.c >&5 configure:4336: $? = 0 configure:4384: result: yes configure:4387: checking for C compiler default output file name configure:4389: result: a.out configure:4395: checking for suffix of executables configure:4402: gcc -o conftest conftest.c >&5 configure:4406: $? = 0 configure:4428: result: configure:4450: checking whether we are cross compiling configure:4458: gcc -o conftest conftest.c >&5 configure:4462: $? = 0 configure:4469: ./conftest configure:4473: $? = 0 configure:4488: result: no configure:4493: checking for suffix of object files configure:4515: gcc -c conftest.c >&5 configure:4519: $? = 0 configure:4540: result: o configure:4544: checking whether we are using the GNU C compiler configure:4563: gcc -c conftest.c >&5 configure:4563: $? = 0 configure:4572: result: yes configure:4581: checking whether gcc accepts -g configure:4601: gcc -c -g conftest.c >&5 configure:4601: $? = 0 configure:4642: result: yes configure:4659: checking for gcc option to accept ISO C89 configure:4722: gcc -c -g -O2 conftest.c >&5 configure:4722: $? = 0 configure:4735: result: none needed configure:4760: checking whether gcc understands -c and -o together configure:4782: gcc -c conftest.c -o conftest2.o configure:4785: $? = 0 configure:4782: gcc -c conftest.c -o conftest2.o configure:4785: $? = 0 configure:4797: result: yes configure:4825: checking for style of include used by make configure:4853: result: GNU configure:4879: checking dependency style of gcc configure:4990: result: gcc3 configure:5010: checking how to run the C preprocessor configure:5041: gcc -E conftest.c configure:5041: $? = 0 configure:5055: gcc -E conftest.c conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:5055: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | /* end confdefs.h. */ | #include configure:5080: result: gcc -E configure:5100: gcc -E conftest.c configure:5100: $? = 0 configure:5114: gcc -E conftest.c conftest.c:11:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:5114: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | /* end confdefs.h. */ | #include configure:5254: checking for C++ compiler version configure:5263: g++ --version >&5 g++ (GCC) 5.1.1 20150618 (Red Hat 5.1.1-4) Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:5274: $? = 0 configure:5263: g++ -v >&5 Using built-in specs. COLLECT_GCC=g++ COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/5.1.1/lto-wrapper Target: x86_64-redhat-linux Configured with: ../configure --enable-bootstrap --enable-languages=c,c++,objc,obj-c++,fortran,ada,go,lto --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-shared --enable-threads=posix --enable-checking=release --enable-multilib --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --with-linker-hash-style=gnu --enable-plugin --enable-initfini-array --disable-libgcj --with-default-libstdcxx-abi=c++98 --with-isl --enable-libmpx --enable-gnu-indirect-function --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux Thread model: posix gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) configure:5274: $? = 0 configure:5263: g++ -V >&5 g++: error: unrecognized command line option '-V' g++: fatal error: no input files compilation terminated. configure:5274: $? = 1 configure:5263: g++ -qversion >&5 g++: error: unrecognized command line option '-qversion' g++: fatal error: no input files compilation terminated. configure:5274: $? = 1 configure:5278: checking whether we are using the GNU C++ compiler configure:5297: g++ -c -DNDEBUG conftest.cpp >&5 configure:5297: $? = 0 configure:5306: result: yes configure:5315: checking whether g++ accepts -g configure:5335: g++ -c -g conftest.cpp >&5 configure:5335: $? = 0 configure:5376: result: yes configure:5401: checking dependency style of g++ configure:5512: result: gcc3 configure:5557: checking build system type configure:5571: result: x86_64-unknown-linux-gnu configure:5591: checking host system type configure:5604: result: x86_64-unknown-linux-gnu configure:5645: checking how to print strings configure:5672: result: printf configure:5693: checking for a sed that does not truncate output configure:5757: result: /usr/bin/sed configure:5775: checking for grep that handles long lines and -e configure:5833: result: /usr/bin/grep configure:5838: checking for egrep configure:5900: result: /usr/bin/grep -E configure:5905: checking for fgrep configure:5967: result: /usr/bin/grep -F configure:6002: checking for ld used by gcc configure:6069: result: /usr/bin/ld configure:6076: checking if the linker (/usr/bin/ld) is GNU ld configure:6091: result: yes configure:6103: checking for BSD- or MS-compatible name lister (nm) configure:6152: result: /usr/bin/nm -B configure:6282: checking the name lister (/usr/bin/nm -B) interface configure:6289: gcc -c -g -O2 conftest.c >&5 configure:6292: /usr/bin/nm -B "conftest.o" configure:6295: output 0000000000000000 B some_variable configure:6302: result: BSD nm configure:6305: checking whether ln -s works configure:6309: result: yes configure:6317: checking the maximum length of command line arguments configure:6448: result: 1572864 configure:6465: checking whether the shell understands some XSI constructs configure:6475: result: yes configure:6479: checking whether the shell understands "+=" configure:6485: result: yes configure:6520: checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format configure:6560: result: func_convert_file_noop configure:6567: checking how to convert x86_64-unknown-linux-gnu file names to toolchain format configure:6587: result: func_convert_file_noop configure:6594: checking for /usr/bin/ld option to reload object files configure:6601: result: -r configure:6675: checking for objdump configure:6691: found /usr/bin/objdump configure:6702: result: objdump configure:6734: checking how to recognize dependent libraries configure:6932: result: pass_all configure:7017: checking for dlltool configure:7047: result: no configure:7077: checking how to associate runtime and link libraries configure:7104: result: printf %s\n configure:7165: checking for ar configure:7181: found /usr/bin/ar configure:7192: result: ar configure:7229: checking for archiver @FILE support configure:7246: gcc -c -g -O2 conftest.c >&5 configure:7246: $? = 0 configure:7249: ar cru libconftest.a @conftest.lst >&5 ar: `u' modifier ignored since `D' is the default (see `U') configure:7252: $? = 0 configure:7257: ar cru libconftest.a @conftest.lst >&5 ar: `u' modifier ignored since `D' is the default (see `U') ar: conftest.o: No such file or directory configure:7260: $? = 1 configure:7272: result: @ configure:7330: checking for strip configure:7346: found /usr/bin/strip configure:7357: result: strip configure:7429: checking for ranlib configure:7445: found /usr/bin/ranlib configure:7456: result: ranlib configure:7558: checking command to parse /usr/bin/nm -B output from gcc object configure:7678: gcc -c -g -O2 conftest.c >&5 configure:7681: $? = 0 configure:7685: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm configure:7688: $? = 0 configure:7754: gcc -o conftest -g -O2 conftest.c conftstm.o >&5 configure:7757: $? = 0 configure:7795: result: ok configure:7832: checking for sysroot configure:7862: result: no configure:7939: gcc -c -g -O2 conftest.c >&5 configure:7942: $? = 0 configure:8131: checking for mt configure:8161: result: no configure:8181: checking if : is a manifest tool configure:8187: : '-?' configure:8195: result: no configure:8833: checking for ANSI C header files configure:8853: gcc -c -g -O2 conftest.c >&5 configure:8853: $? = 0 configure:8926: gcc -o conftest -g -O2 conftest.c >&5 configure:8926: $? = 0 configure:8926: ./conftest configure:8926: $? = 0 configure:8937: result: yes configure:8950: checking for sys/types.h configure:8950: gcc -c -g -O2 conftest.c >&5 configure:8950: $? = 0 configure:8950: result: yes configure:8950: checking for sys/stat.h configure:8950: gcc -c -g -O2 conftest.c >&5 configure:8950: $? = 0 configure:8950: result: yes configure:8950: checking for stdlib.h configure:8950: gcc -c -g -O2 conftest.c >&5 configure:8950: $? = 0 configure:8950: result: yes configure:8950: checking for string.h configure:8950: gcc -c -g -O2 conftest.c >&5 configure:8950: $? = 0 configure:8950: result: yes configure:8950: checking for memory.h configure:8950: gcc -c -g -O2 conftest.c >&5 configure:8950: $? = 0 configure:8950: result: yes configure:8950: checking for strings.h configure:8950: gcc -c -g -O2 conftest.c >&5 configure:8950: $? = 0 configure:8950: result: yes configure:8950: checking for inttypes.h configure:8950: gcc -c -g -O2 conftest.c >&5 configure:8950: $? = 0 configure:8950: result: yes configure:8950: checking for stdint.h configure:8950: gcc -c -g -O2 conftest.c >&5 configure:8950: $? = 0 configure:8950: result: yes configure:8950: checking for unistd.h configure:8950: gcc -c -g -O2 conftest.c >&5 configure:8950: $? = 0 configure:8950: result: yes configure:8964: checking for dlfcn.h configure:8964: gcc -c -g -O2 conftest.c >&5 configure:8964: $? = 0 configure:8964: result: yes configure:9181: checking for objdir configure:9196: result: .libs configure:9467: checking if gcc supports -fno-rtti -fno-exceptions configure:9485: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C configure:9489: $? = 0 configure:9502: result: no configure:9829: checking for gcc option to produce PIC configure:9836: result: -fPIC -DPIC configure:9844: checking if gcc PIC flag -fPIC -DPIC works configure:9862: gcc -c -g -O2 -fPIC -DPIC -DPIC conftest.c >&5 configure:9866: $? = 0 configure:9879: result: yes configure:9908: checking if gcc static flag -static works configure:9936: result: no configure:9951: checking if gcc supports -c -o file.o configure:9972: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5 configure:9976: $? = 0 configure:9998: result: yes configure:10006: checking if gcc supports -c -o file.o configure:10053: result: yes configure:10086: checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries configure:11243: result: yes configure:11280: checking whether -lc should be explicitly linked in configure:11288: gcc -c -g -O2 conftest.c >&5 configure:11291: $? = 0 configure:11306: gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /usr/bin/grep -lc \>/dev/null 2\>\&1 configure:11309: $? = 0 configure:11323: result: no configure:11483: checking dynamic linker characteristics configure:11983: gcc -o conftest -g -O2 -Wl,-rpath -Wl,/foo conftest.c >&5 configure:11983: $? = 0 configure:12217: result: GNU/Linux ld.so configure:12324: checking how to hardcode library paths into programs configure:12349: result: immediate configure:12889: checking whether stripping libraries is possible configure:12894: result: yes configure:12929: checking if libtool supports shared libraries configure:12931: result: yes configure:12934: checking whether to build shared libraries configure:12955: result: yes configure:12958: checking whether to build static libraries configure:12962: result: yes configure:12985: checking how to run the C++ preprocessor configure:13012: g++ -E conftest.cpp configure:13012: $? = 0 configure:13026: g++ -E conftest.cpp conftest.cpp:23:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:13026: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include configure:13051: result: g++ -E configure:13071: g++ -E conftest.cpp configure:13071: $? = 0 configure:13085: g++ -E conftest.cpp conftest.cpp:23:28: fatal error: ac_nonexistent.h: No such file or directory compilation terminated. configure:13085: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include configure:13254: checking for ld used by g++ configure:13321: result: /usr/bin/ld -m elf_x86_64 configure:13328: checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld configure:13343: result: yes configure:13398: checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries configure:14400: result: yes configure:14436: g++ -c -DNDEBUG conftest.cpp >&5 configure:14439: $? = 0 configure:14959: checking for g++ option to produce PIC configure:14966: result: -fPIC -DPIC configure:14974: checking if g++ PIC flag -fPIC -DPIC works configure:14992: g++ -c -DNDEBUG -fPIC -DPIC -DPIC conftest.cpp >&5 configure:14996: $? = 0 configure:15009: result: yes configure:15032: checking if g++ static flag -static works configure:15060: result: no configure:15072: checking if g++ supports -c -o file.o configure:15093: g++ -c -DNDEBUG -o out/conftest2.o conftest.cpp >&5 configure:15097: $? = 0 configure:15119: result: yes configure:15124: checking if g++ supports -c -o file.o configure:15171: result: yes configure:15201: checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries configure:15240: result: yes configure:15381: checking dynamic linker characteristics configure:16049: result: GNU/Linux ld.so configure:16102: checking how to hardcode library paths into programs configure:16127: result: immediate configure:16188: checking whether make sets $(MAKE) configure:16210: result: yes configure:16228: checking for bison configure:16244: found /usr/bin/bison configure:16256: result: yes configure:16275: checking for bison version >= 2.5 configure:16289: result: yes configure:16331: checking for bison configure:16347: found /usr/bin/bison configure:16358: result: bison -y configure:16374: checking for flex configure:16390: found /usr/bin/flex configure:16401: result: flex configure:16439: flex conftest.l configure:16443: $? = 0 configure:16445: checking lex output file root configure:16459: result: lex.yy configure:16464: checking lex library configure:16478: gcc -o conftest -g -O2 conftest.c >&5 conftest.c:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.c:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ /tmp/ccMRaT2l.o: In function `input': /home/anastas/Downloads/thrift-0.9.3/lex.yy.c:1170: undefined reference to `yywrap' /tmp/ccMRaT2l.o: In function `yylex': /home/anastas/Downloads/thrift-0.9.3/lex.yy.c:869: undefined reference to `yywrap' /tmp/ccMRaT2l.o: In function `main': /home/anastas/Downloads/thrift-0.9.3/conftest.l:18: undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:16478: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | /* end confdefs.h. */ | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | #define YY_FLEX_SUBMINOR_VERSION 37 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | #ifdef __cplusplus | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | /* C99 requires __STDC__ to be defined as 1. */ | #if defined (__STDC__) | | #define YY_USE_CONST | | #endif /* defined (__STDC__) */ | #endif /* ! __cplusplus */ | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #define YY_BUF_SIZE 16384 | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern yy_size_t yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | yy_size_t yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ | yy_size_t yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yy_fatal_error (yyconst char msg[] ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst flex_int32_t yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int32_t yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 469 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy (void ); | | int yyget_debug (void ); | | void yyset_debug (int debug_flag ); | | YY_EXTRA_TYPE yyget_extra (void ); | | void yyset_extra (YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in (void ); | | void yyset_in (FILE * in_str ); | | FILE *yyget_out (void ); | | void yyset_out (FILE * out_str ); | | yy_size_t yyget_leng (void ); | | char *yyget_text (void ); | | int yyget_lineno (void ); | | void yyset_lineno (int line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | static void yyunput (int c,char *buf_ptr ); | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #define YY_READ_BUF_SIZE 8192 | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 653 "lex.yy.c" | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (yy_c_buf_p) - (yytext_ptr); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 792 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | register char *source = (yytext_ptr); | register int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | yy_size_t num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | register int yy_is_jam; | | register YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | static void yyunput (int c, register char * yy_bp ) | { | register char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register yy_size_t number_to_move = (yy_n_chars) + 2; | register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | register char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return EOF; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | int grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | yy_size_t i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | yy_size_t yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param line_number | * | */ | void yyset_lineno (int line_number ) | { | | yylineno = line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * in_str ) | { | yyin = in_str ; | } | | void yyset_out (FILE * out_str ) | { | yyout = out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int bdebug ) | { | yy_flex_debug = bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = 0; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = (char *) 0; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = (FILE *) 0; | yyout = (FILE *) 0; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return (void *) malloc( size ); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:16478: gcc -o conftest -g -O2 conftest.c -lfl >&5 conftest.c:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.c:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ /usr/bin/ld: cannot find -lfl collect2: error: ld returned 1 exit status configure:16478: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | /* end confdefs.h. */ | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | #define YY_FLEX_SUBMINOR_VERSION 37 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | #ifdef __cplusplus | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | /* C99 requires __STDC__ to be defined as 1. */ | #if defined (__STDC__) | | #define YY_USE_CONST | | #endif /* defined (__STDC__) */ | #endif /* ! __cplusplus */ | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #define YY_BUF_SIZE 16384 | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern yy_size_t yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | yy_size_t yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ | yy_size_t yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yy_fatal_error (yyconst char msg[] ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst flex_int32_t yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int32_t yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 469 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy (void ); | | int yyget_debug (void ); | | void yyset_debug (int debug_flag ); | | YY_EXTRA_TYPE yyget_extra (void ); | | void yyset_extra (YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in (void ); | | void yyset_in (FILE * in_str ); | | FILE *yyget_out (void ); | | void yyset_out (FILE * out_str ); | | yy_size_t yyget_leng (void ); | | char *yyget_text (void ); | | int yyget_lineno (void ); | | void yyset_lineno (int line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | static void yyunput (int c,char *buf_ptr ); | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #define YY_READ_BUF_SIZE 8192 | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 653 "lex.yy.c" | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (yy_c_buf_p) - (yytext_ptr); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 792 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | register char *source = (yytext_ptr); | register int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | yy_size_t num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | register int yy_is_jam; | | register YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | static void yyunput (int c, register char * yy_bp ) | { | register char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register yy_size_t number_to_move = (yy_n_chars) + 2; | register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | register char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return EOF; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | int grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | yy_size_t i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | yy_size_t yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param line_number | * | */ | void yyset_lineno (int line_number ) | { | | yylineno = line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * in_str ) | { | yyin = in_str ; | } | | void yyset_out (FILE * out_str ) | { | yyout = out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int bdebug ) | { | yy_flex_debug = bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = 0; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = (char *) 0; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = (FILE *) 0; | yyout = (FILE *) 0; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return (void *) malloc( size ); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:16478: gcc -o conftest -g -O2 conftest.c -ll >&5 conftest.c:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.c:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ /usr/bin/ld: cannot find -ll collect2: error: ld returned 1 exit status configure:16478: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | /* end confdefs.h. */ | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | #define YY_FLEX_SUBMINOR_VERSION 37 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | #ifdef __cplusplus | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | /* C99 requires __STDC__ to be defined as 1. */ | #if defined (__STDC__) | | #define YY_USE_CONST | | #endif /* defined (__STDC__) */ | #endif /* ! __cplusplus */ | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #define YY_BUF_SIZE 16384 | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern yy_size_t yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | yy_size_t yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ | yy_size_t yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yy_fatal_error (yyconst char msg[] ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst flex_int32_t yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int32_t yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 469 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy (void ); | | int yyget_debug (void ); | | void yyset_debug (int debug_flag ); | | YY_EXTRA_TYPE yyget_extra (void ); | | void yyset_extra (YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in (void ); | | void yyset_in (FILE * in_str ); | | FILE *yyget_out (void ); | | void yyset_out (FILE * out_str ); | | yy_size_t yyget_leng (void ); | | char *yyget_text (void ); | | int yyget_lineno (void ); | | void yyset_lineno (int line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | static void yyunput (int c,char *buf_ptr ); | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #define YY_READ_BUF_SIZE 8192 | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 653 "lex.yy.c" | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (yy_c_buf_p) - (yytext_ptr); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 792 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | register char *source = (yytext_ptr); | register int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | yy_size_t num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | register int yy_is_jam; | | register YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | static void yyunput (int c, register char * yy_bp ) | { | register char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register yy_size_t number_to_move = (yy_n_chars) + 2; | register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | register char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return EOF; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | int grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | yy_size_t i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | yy_size_t yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param line_number | * | */ | void yyset_lineno (int line_number ) | { | | yylineno = line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * in_str ) | { | yyin = in_str ; | } | | void yyset_out (FILE * out_str ) | { | yyout = out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int bdebug ) | { | yy_flex_debug = bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = 0; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = (char *) 0; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = (FILE *) 0; | yyout = (FILE *) 0; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return (void *) malloc( size ); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:16488: result: none needed configure:16494: checking whether yytext is a pointer configure:16511: gcc -o conftest -g -O2 conftest.c >&5 conftest.c:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.c:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ /tmp/ccwfabtf.o: In function `input': /home/anastas/Downloads/thrift-0.9.3/lex.yy.c:1170: undefined reference to `yywrap' /tmp/ccwfabtf.o: In function `yylex': /home/anastas/Downloads/thrift-0.9.3/lex.yy.c:869: undefined reference to `yywrap' /tmp/ccwfabtf.o: In function `main': /home/anastas/Downloads/thrift-0.9.3/conftest.l:18: undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:16511: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | /* end confdefs.h. */ | | #define YYTEXT_POINTER 1 | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | #define YY_FLEX_SUBMINOR_VERSION 37 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | #ifdef __cplusplus | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | /* C99 requires __STDC__ to be defined as 1. */ | #if defined (__STDC__) | | #define YY_USE_CONST | | #endif /* defined (__STDC__) */ | #endif /* ! __cplusplus */ | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #define YY_BUF_SIZE 16384 | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern yy_size_t yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | yy_size_t yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ | yy_size_t yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yy_fatal_error (yyconst char msg[] ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst flex_int32_t yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int32_t yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 469 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy (void ); | | int yyget_debug (void ); | | void yyset_debug (int debug_flag ); | | YY_EXTRA_TYPE yyget_extra (void ); | | void yyset_extra (YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in (void ); | | void yyset_in (FILE * in_str ); | | FILE *yyget_out (void ); | | void yyset_out (FILE * out_str ); | | yy_size_t yyget_leng (void ); | | char *yyget_text (void ); | | int yyget_lineno (void ); | | void yyset_lineno (int line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | static void yyunput (int c,char *buf_ptr ); | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #define YY_READ_BUF_SIZE 8192 | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 653 "lex.yy.c" | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (yy_c_buf_p) - (yytext_ptr); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 792 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | register char *source = (yytext_ptr); | register int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | yy_size_t num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | register int yy_is_jam; | | register YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | static void yyunput (int c, register char * yy_bp ) | { | register char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register yy_size_t number_to_move = (yy_n_chars) + 2; | register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | register char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return EOF; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | int grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | yy_size_t i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | yy_size_t yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param line_number | * | */ | void yyset_lineno (int line_number ) | { | | yylineno = line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * in_str ) | { | yyin = in_str ; | } | | void yyset_out (FILE * out_str ) | { | yyout = out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int bdebug ) | { | yy_flex_debug = bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = 0; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = (char *) 0; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = (FILE *) 0; | yyout = (FILE *) 0; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return (void *) malloc( size ); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:16519: result: no configure:16532: checking whether ln -s works configure:16536: result: yes configure:16548: checking for gawk configure:16575: result: gawk configure:16629: checking for ranlib configure:16656: result: ranlib configure:16692: checking whether g++ supports C++11 features by default configure:16749: g++ -c -DNDEBUG conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp:30:21: error: expected identifier before 'sizeof' static_assert(sizeof(int) <= sizeof(T), "not big enough"); ^ conftest.cpp:30:21: error: expected ',' or '...' before 'sizeof' conftest.cpp:30:63: error: ISO C++ forbids declaration of 'static_assert' with no type [-fpermissive] static_assert(sizeof(int) <= sizeof(T), "not big enough"); ^ conftest.cpp:37:20: warning: override controls (override/final) only available with -std=c++11 or -std=gnu++11 virtual void f() override {} ^ conftest.cpp:40:29: error: '>>' should be '> >' within a nested template argument list typedef check> right_angle_brackets; ^ conftest.cpp:43:13: error: expected constructor, destructor, or type conversion before '(' token decltype(a) b; ^ conftest.cpp:47:15: error: expected unqualified-id before '&&' token check_type&& cr = static_cast(c); ^ conftest.cpp:49:10: error: 'd' does not name a type auto d = a; ^ conftest.cpp:50:10: error: 'l' does not name a type auto l = [](){}; ^ conftest.cpp: In constructor 'use_l::use_l()': conftest.cpp:52:32: error: 'l' was not declared in this scope struct use_l { use_l() { l(); } }; ^ conftest.cpp: At global scope: conftest.cpp:60:9: error: expected unqualified-id before 'using' using member = typename T::member_type; ^ conftest.cpp:66:19: error: variable or field 'func' declared void void func(member*) {} ^ conftest.cpp:66:19: error: 'member' was not declared in this scope conftest.cpp:66:27: error: expected primary-expression before '>' token void func(member*) {} ^ conftest.cpp:66:29: error: expected primary-expression before ')' token void func(member*) {} ^ configure:16749: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | /* end confdefs.h. */ | | template | struct check | { | static_assert(sizeof(int) <= sizeof(T), "not big enough"); | }; | | struct Base { | virtual void f() {} | }; | struct Child : public Base { | virtual void f() override {} | }; | | typedef check> right_angle_brackets; | | int a; | decltype(a) b; | | typedef check check_type; | check_type c; | check_type&& cr = static_cast(c); | | auto d = a; | auto l = [](){}; | // Prevent Clang error: unused variable 'l' [-Werror,-Wunused-variable] | struct use_l { use_l() { l(); } }; | | // http://stackoverflow.com/questions/13728184/template-aliases-and-sfinae | // Clang 3.1 fails with headers of libstd++ 4.8.3 when using std::function because of this | namespace test_template_alias_sfinae { | struct foo {}; | | template | using member = typename T::member_type; | | template | void func(...) {} | | template | void func(member*) {} | | void test(); | | void test() { | func(0); | } | } | configure:16756: result: no configure:16767: checking whether g++ supports C++11 features with -std=c++11 configure:16826: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:16826: $? = 0 configure:16835: result: yes configure:16966: checking for boostlib >= 1.53.0 configure:17046: g++ -c -DNDEBUG -std=c++11 -I/usr/include conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:17046: $? = 0 configure:17048: result: yes configure:17230: checking for pkg-config configure:17260: result: /usr/bin/pkg-config configure:17316: checking whether compiling and linking against OpenSSL works Trying link with OPENSSL_LDFLAGS=; OPENSSL_LIBS=-lssl -lcrypto ; OPENSSL_INCLUDES= configure:17338: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:17338: $? = 0 configure:17340: result: yes configure:17387: checking for libevent >= 1.0 configure:17616: gcc -o conftest -g -O2 conftest.c -levent >&5 conftest.c:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.c:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:17616: $? = 0 configure:17649: result: yes configure:17945: checking for QT configure:17952: $PKG_CONFIG --exists --print-errors "QtCore >= 4.3, QtNetwork >= 4.3" configure:17955: $? = 0 configure:17969: $PKG_CONFIG --exists --print-errors "QtCore >= 4.3, QtNetwork >= 4.3" configure:17972: $? = 0 configure:18010: result: yes configure:18020: checking for moc-qt4 configure:18038: found /usr/bin/moc-qt4 configure:18050: result: /usr/bin/moc-qt4 configure:18084: checking for QT5 configure:18091: $PKG_CONFIG --exists --print-errors "Qt5Core >= 5.0, Qt5Network >= 5.0" Package Qt5Core was not found in the pkg-config search path. Perhaps you should add the directory containing `Qt5Core.pc' to the PKG_CONFIG_PATH environment variable No package 'Qt5Core' found Package Qt5Network was not found in the pkg-config search path. Perhaps you should add the directory containing `Qt5Network.pc' to the PKG_CONFIG_PATH environment variable No package 'Qt5Network' found configure:18094: $? = 1 configure:18108: $PKG_CONFIG --exists --print-errors "Qt5Core >= 5.0, Qt5Network >= 5.0" Package Qt5Core was not found in the pkg-config search path. Perhaps you should add the directory containing `Qt5Core.pc' to the PKG_CONFIG_PATH environment variable No package 'Qt5Core' found Package Qt5Network was not found in the pkg-config search path. Perhaps you should add the directory containing `Qt5Network.pc' to the PKG_CONFIG_PATH environment variable No package 'Qt5Network' found configure:18111: $? = 1 configure:18125: result: no No package 'Qt5Core' found No package 'Qt5Network' found configure:18270: checking for GLIB configure:18277: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.0" configure:18280: $? = 0 configure:18294: $PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.0" configure:18297: $? = 0 configure:18335: result: yes configure:18341: checking for GOBJECT configure:18348: $PKG_CONFIG --exists --print-errors "gobject-2.0 >= 2.0" configure:18351: $? = 0 configure:18365: $PKG_CONFIG --exists --print-errors "gobject-2.0 >= 2.0" configure:18368: $? = 0 configure:18406: result: yes configure:20367: checking for trial configure:20400: result: no configure:20440: checking for a Python interpreter with version >= 2.4 configure:20457: python -c import sys # split strings by '.' and convert to numeric. Append some zeros # because we need at least 4 digits for the hex conversion. # map returns an iterator in Python 3.0 and a list in 2.x minver = list(map(int, '2.4'.split('.'))) + [0, 0, 0] minverhex = 0 # xrange is not present in Python 3.0 and range returns an iterator for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[i] sys.exit(sys.hexversion < minverhex) configure:20460: $? = 0 configure:20466: result: python configure:20474: checking for python configure:20492: found /usr/bin/python configure:20504: result: /usr/bin/python configure:20522: checking for python version configure:20529: result: 2.7 configure:20541: checking for python platform configure:20548: result: linux2 configure:20574: checking for python script directory configure:20609: result: ${prefix}/lib/python2.7/site-packages configure:20618: checking for python extension module directory configure:20653: result: ${exec_prefix}/lib64/python2.7/site-packages configure:21045: checking for phpunit configure:21078: result: no configure:21463: checking for haxe configure:21496: result: no configure:22344: checking for library containing strerror configure:22375: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22375: $? = 0 configure:22392: result: none required configure:22403: checking for an ANSI C-conforming const configure:22469: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22469: $? = 0 configure:22476: result: yes configure:22484: checking for inline configure:22500: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22500: $? = 0 configure:22508: result: inline configure:22526: checking for working volatile configure:22545: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22545: $? = 0 configure:22552: result: yes configure:22561: checking for stdbool.h that conforms to C99 configure:22628: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp:32:15: error: expected unqualified-id before string constant "error: bool is not defined" ^ conftest.cpp:50:48: error: 's' does not name a type struct s { _Bool s: 1; _Bool t; } s; ^ conftest.cpp:60:28: error: 's' was not declared in this scope char i[sizeof s.t]; ^ conftest.cpp: In function 'int main()': conftest.cpp:78:24: error: 's' was not declared in this scope bool e = &s; ^ conftest.cpp:82:63: error: 'i' was not declared in this scope return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l ^ configure:22628: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | /* end confdefs.h. */ | | #include | #ifndef bool | "error: bool is not defined" | #endif | #ifndef false | "error: false is not defined" | #endif | #if false | "error: false is not 0" | #endif | #ifndef true | "error: true is not defined" | #endif | #if true != 1 | "error: true is not 1" | #endif | #ifndef __bool_true_false_are_defined | "error: __bool_true_false_are_defined is not defined" | #endif | | struct s { _Bool s: 1; _Bool t; } s; | | char a[true == 1 ? 1 : -1]; | char b[false == 0 ? 1 : -1]; | char c[__bool_true_false_are_defined == 1 ? 1 : -1]; | char d[(bool) 0.5 == true ? 1 : -1]; | /* See body of main program for 'e'. */ | char f[(_Bool) 0.0 == false ? 1 : -1]; | char g[true]; | char h[sizeof (_Bool)]; | char i[sizeof s.t]; | enum { j = false, k = true, l = false * true, m = true * 256 }; | /* The following fails for | HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */ | _Bool n[m]; | char o[sizeof n == m * sizeof n[0] ? 1 : -1]; | char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1]; | /* Catch a bug in an HP-UX C compiler. See | http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html | http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html | */ | _Bool q = true; | _Bool *pq = &q; | | int | main () | { | | bool e = &s; | *pq |= q; | *pq |= ! q; | /* Refer to every declared value, to avoid compiler optimizations. */ | return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l | + !m + !n + !o + !p + !q + !pq); | | ; | return 0; | } configure:22635: result: no configure:22637: checking for _Bool configure:22637: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:65:13: error: '_Bool' was not declared in this scope if (sizeof (_Bool)) ^ configure:22637: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof (_Bool)) | return 0; | ; | return 0; | } configure:22637: result: no configure:22654: checking for ANSI C header files configure:22758: result: yes configure:22766: checking whether time.h and sys/time.h may both be included configure:22786: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22786: $? = 0 configure:22793: result: yes configure:22801: checking for sys/wait.h that is POSIX.1 compatible configure:22827: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22827: $? = 0 configure:22834: result: yes configure:22842: checking return type of signal handlers configure:22860: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:38:25: error: void value not ignored as it ought to be return *(signal (0, 0)) (0) == 1; ^ configure:22860: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | /* end confdefs.h. */ | #include | #include | | int | main () | { | return *(signal (0, 0)) (0) == 1; | ; | return 0; | } configure:22867: result: void configure:22877: checking arpa/inet.h usability configure:22877: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22877: $? = 0 configure:22877: result: yes configure:22877: checking arpa/inet.h presence configure:22877: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22877: $? = 0 configure:22877: result: yes configure:22877: checking for arpa/inet.h configure:22877: result: yes configure:22889: checking sys/param.h usability configure:22889: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22889: $? = 0 configure:22889: result: yes configure:22889: checking sys/param.h presence configure:22889: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22889: $? = 0 configure:22889: result: yes configure:22889: checking for sys/param.h configure:22889: result: yes configure:22901: checking fcntl.h usability configure:22901: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22901: $? = 0 configure:22901: result: yes configure:22901: checking fcntl.h presence configure:22901: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22901: $? = 0 configure:22901: result: yes configure:22901: checking for fcntl.h configure:22901: result: yes configure:22913: checking for inttypes.h configure:22913: result: yes configure:22925: checking limits.h usability configure:22925: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22925: $? = 0 configure:22925: result: yes configure:22925: checking limits.h presence configure:22925: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22925: $? = 0 configure:22925: result: yes configure:22925: checking for limits.h configure:22925: result: yes configure:22937: checking netdb.h usability configure:22937: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22937: $? = 0 configure:22937: result: yes configure:22937: checking netdb.h presence configure:22937: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22937: $? = 0 configure:22937: result: yes configure:22937: checking for netdb.h configure:22937: result: yes configure:22949: checking netinet/in.h usability configure:22949: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22949: $? = 0 configure:22949: result: yes configure:22949: checking netinet/in.h presence configure:22949: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22949: $? = 0 configure:22949: result: yes configure:22949: checking for netinet/in.h configure:22949: result: yes configure:22961: checking pthread.h usability configure:22961: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22961: $? = 0 configure:22961: result: yes configure:22961: checking pthread.h presence configure:22961: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22961: $? = 0 configure:22961: result: yes configure:22961: checking for pthread.h configure:22961: result: yes configure:22973: checking stddef.h usability configure:22973: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22973: $? = 0 configure:22973: result: yes configure:22973: checking stddef.h presence configure:22973: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22973: $? = 0 configure:22973: result: yes configure:22973: checking for stddef.h configure:22973: result: yes configure:22985: checking for stdlib.h configure:22985: result: yes configure:22997: checking sys/socket.h usability configure:22997: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22997: $? = 0 configure:22997: result: yes configure:22997: checking sys/socket.h presence configure:22997: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:22997: $? = 0 configure:22997: result: yes configure:22997: checking for sys/socket.h configure:22997: result: yes configure:23009: checking sys/time.h usability configure:23009: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23009: $? = 0 configure:23009: result: yes configure:23009: checking sys/time.h presence configure:23009: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23009: $? = 0 configure:23009: result: yes configure:23009: checking for sys/time.h configure:23009: result: yes configure:23021: checking sys/un.h usability configure:23021: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23021: $? = 0 configure:23021: result: yes configure:23021: checking sys/un.h presence configure:23021: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23021: $? = 0 configure:23021: result: yes configure:23021: checking for sys/un.h configure:23021: result: yes configure:23033: checking sys/poll.h usability configure:23033: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23033: $? = 0 configure:23033: result: yes configure:23033: checking sys/poll.h presence configure:23033: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23033: $? = 0 configure:23033: result: yes configure:23033: checking for sys/poll.h configure:23033: result: yes configure:23045: checking sys/resource.h usability configure:23045: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23045: $? = 0 configure:23045: result: yes configure:23045: checking sys/resource.h presence configure:23045: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23045: $? = 0 configure:23045: result: yes configure:23045: checking for sys/resource.h configure:23045: result: yes configure:23057: checking for unistd.h configure:23057: result: yes configure:23069: checking libintl.h usability configure:23069: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23069: $? = 0 configure:23069: result: yes configure:23069: checking libintl.h presence configure:23069: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23069: $? = 0 configure:23069: result: yes configure:23069: checking for libintl.h configure:23069: result: yes configure:23081: checking malloc.h usability configure:23081: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23081: $? = 0 configure:23081: result: yes configure:23081: checking malloc.h presence configure:23081: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23081: $? = 0 configure:23081: result: yes configure:23081: checking for malloc.h configure:23081: result: yes configure:23093: checking openssl/ssl.h usability configure:23093: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23093: $? = 0 configure:23093: result: yes configure:23093: checking openssl/ssl.h presence configure:23093: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23093: $? = 0 configure:23093: result: yes configure:23093: checking for openssl/ssl.h configure:23093: result: yes configure:23105: checking openssl/rand.h usability configure:23105: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23105: $? = 0 configure:23105: result: yes configure:23105: checking openssl/rand.h presence configure:23105: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23105: $? = 0 configure:23105: result: yes configure:23105: checking for openssl/rand.h configure:23105: result: yes configure:23117: checking openssl/x509v3.h usability configure:23117: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23117: $? = 0 configure:23117: result: yes configure:23117: checking openssl/x509v3.h presence configure:23117: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23117: $? = 0 configure:23117: result: yes configure:23117: checking for openssl/x509v3.h configure:23117: result: yes configure:23129: checking sched.h usability configure:23129: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23129: $? = 0 configure:23129: result: yes configure:23129: checking sched.h presence configure:23129: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23129: $? = 0 configure:23129: result: yes configure:23129: checking for sched.h configure:23129: result: yes configure:23141: checking wchar.h usability configure:23141: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23141: $? = 0 configure:23141: result: yes configure:23141: checking wchar.h presence configure:23141: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23141: $? = 0 configure:23141: result: yes configure:23141: checking for wchar.h configure:23141: result: yes configure:23152: checking for pthread_create in -lpthread configure:23177: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23177: $? = 0 configure:23186: result: yes configure:23197: checking for clock_gettime in -lrt configure:23222: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23222: $? = 0 configure:23231: result: yes configure:23242: checking for setsockopt in -lsocket configure:23267: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lsocket -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ /usr/bin/ld: cannot find -lsocket collect2: error: ld returned 1 exit status configure:23267: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char setsockopt (); | int | main () | { | return setsockopt (); | ; | return 0; | } configure:23276: result: no configure:23291: checking for BN_init in -lcrypto configure:23316: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23316: $? = 0 configure:23325: result: yes configure:23328: checking for SSL_ctrl in -lssl configure:23354: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23354: $? = 0 configure:23363: result: yes configure:23378: checking for int16_t configure:23378: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23378: $? = 0 configure:23378: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:96:58: error: size of array 'test_array' is negative < (int16_t) (((((int16_t) 1 << N) << N) - 1) * 2 + 2))]; ^ configure:23378: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | enum { N = 16 / 2 - 1 }; | int | main () | { | static int test_array [1 - 2 * !((int16_t) (((((int16_t) 1 << N) << N) - 1) * 2 + 1) | < (int16_t) (((((int16_t) 1 << N) << N) - 1) * 2 + 2))]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:23378: result: yes configure:23389: checking for int32_t configure:23389: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23389: $? = 0 configure:23389: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:96:53: warning: integer overflow in expression [-Woverflow] < (int32_t) (((((int32_t) 1 << N) << N) - 1) * 2 + 2))]; ^ conftest.cpp:96:58: error: size of array 'test_array' is negative < (int32_t) (((((int32_t) 1 << N) << N) - 1) * 2 + 2))]; ^ configure:23389: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | enum { N = 32 / 2 - 1 }; | int | main () | { | static int test_array [1 - 2 * !((int32_t) (((((int32_t) 1 << N) << N) - 1) * 2 + 1) | < (int32_t) (((((int32_t) 1 << N) << N) - 1) * 2 + 2))]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:23389: result: yes configure:23400: checking for int64_t configure:23400: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23400: $? = 0 configure:23400: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:96:53: warning: integer overflow in expression [-Woverflow] < (int64_t) (((((int64_t) 1 << N) << N) - 1) * 2 + 2))]; ^ conftest.cpp:96:58: error: size of array 'test_array' is negative < (int64_t) (((((int64_t) 1 << N) << N) - 1) * 2 + 2))]; ^ configure:23400: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | enum { N = 64 / 2 - 1 }; | int | main () | { | static int test_array [1 - 2 * !((int64_t) (((((int64_t) 1 << N) << N) - 1) * 2 + 1) | < (int64_t) (((((int64_t) 1 << N) << N) - 1) * 2 + 2))]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:23400: result: yes configure:23411: checking for int8_t configure:23411: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23411: $? = 0 configure:23411: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:96:56: error: size of array 'test_array' is negative < (int8_t) (((((int8_t) 1 << N) << N) - 1) * 2 + 2))]; ^ configure:23411: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | enum { N = 8 / 2 - 1 }; | int | main () | { | static int test_array [1 - 2 * !((int8_t) (((((int8_t) 1 << N) << N) - 1) * 2 + 1) | < (int8_t) (((((int8_t) 1 << N) << N) - 1) * 2 + 2))]; | test_array [0] = 0; | return test_array [0]; | | ; | return 0; | } configure:23411: result: yes configure:23422: checking for mode_t configure:23422: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23422: $? = 0 configure:23422: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:94:20: error: expected primary-expression before ')' token if (sizeof ((mode_t))) ^ configure:23422: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((mode_t))) | return 0; | ; | return 0; | } configure:23422: result: yes configure:23433: checking for off_t configure:23433: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23433: $? = 0 configure:23433: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:94:19: error: expected primary-expression before ')' token if (sizeof ((off_t))) ^ configure:23433: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((off_t))) | return 0; | ; | return 0; | } configure:23433: result: yes configure:23444: checking for size_t configure:23444: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23444: $? = 0 configure:23444: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:94:20: error: expected primary-expression before ')' token if (sizeof ((size_t))) ^ configure:23444: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((size_t))) | return 0; | ; | return 0; | } configure:23444: result: yes configure:23455: checking for ssize_t configure:23455: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23455: $? = 0 configure:23455: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:94:21: error: expected primary-expression before ')' token if (sizeof ((ssize_t))) ^ configure:23455: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((ssize_t))) | return 0; | ; | return 0; | } configure:23455: result: yes configure:23466: checking for uint16_t configure:23466: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23466: $? = 0 configure:23466: result: yes configure:23478: checking for uint32_t configure:23478: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23478: $? = 0 configure:23478: result: yes configure:23492: checking for uint64_t configure:23492: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23492: $? = 0 configure:23492: result: yes configure:23506: checking for uint8_t configure:23506: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23506: $? = 0 configure:23506: result: yes configure:23520: checking for ptrdiff_t configure:23520: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23520: $? = 0 configure:23520: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:94:23: error: expected primary-expression before ')' token if (sizeof ((ptrdiff_t))) ^ configure:23520: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((ptrdiff_t))) | return 0; | ; | return 0; | } configure:23520: result: yes configure:23533: checking whether struct tm is in sys/time.h or time.h configure:23553: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23553: $? = 0 configure:23560: result: time.h configure:23569: checking whether AI_ADDRCONFIG is declared configure:23569: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23569: $? = 0 configure:23569: result: yes configure:23586: checking for working alloca.h configure:23603: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23603: $? = 0 configure:23611: result: yes configure:23619: checking for alloca configure:23656: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23656: $? = 0 configure:23664: result: yes configure:23770: checking for pid_t configure:23770: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23770: $? = 0 configure:23770: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp: In function 'int main()': conftest.cpp:97:19: error: expected primary-expression before ')' token if (sizeof ((pid_t))) ^ configure:23770: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | #define HAVE_PTRDIFF_T 1 | #define HAVE_ALLOCA_H 1 | #define HAVE_ALLOCA 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((pid_t))) | return 0; | ; | return 0; | } configure:23770: result: yes configure:23783: checking vfork.h usability configure:23783: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp:94:19: fatal error: vfork.h: No such file or directory compilation terminated. configure:23783: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | #define HAVE_PTRDIFF_T 1 | #define HAVE_ALLOCA_H 1 | #define HAVE_ALLOCA 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:23783: result: no configure:23783: checking vfork.h presence configure:23783: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ conftest.cpp:61:19: fatal error: vfork.h: No such file or directory compilation terminated. configure:23783: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | #define HAVE_PTRDIFF_T 1 | #define HAVE_ALLOCA_H 1 | #define HAVE_ALLOCA 1 | /* end confdefs.h. */ | #include configure:23783: result: no configure:23783: checking for vfork.h configure:23783: result: no configure:23796: checking for fork configure:23796: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23796: $? = 0 configure:23796: result: yes configure:23796: checking for vfork configure:23796: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23796: $? = 0 configure:23796: result: yes configure:23806: checking for working fork configure:23828: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:23828: $? = 0 configure:23828: ./conftest configure:23828: $? = 0 configure:23838: result: yes configure:23859: checking for working vfork configure:23969: result: yes configure:23996: checking for stdlib.h configure:23996: result: yes configure:24006: checking for GNU libc compatible malloc configure:24030: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24030: $? = 0 configure:24030: ./conftest configure:24030: $? = 0 configure:24040: result: yes configure:24061: checking for working memcmp configure:24104: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24104: $? = 0 configure:24104: ./conftest configure:24104: $? = 0 configure:24114: result: yes configure:24125: checking for stdlib.h configure:24125: result: yes configure:24135: checking for GNU libc compatible realloc configure:24159: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24159: $? = 0 configure:24159: ./conftest configure:24159: $? = 0 configure:24169: result: yes configure:24193: checking sys/select.h usability configure:24193: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24193: $? = 0 configure:24193: result: yes configure:24193: checking sys/select.h presence configure:24193: g++ -E conftest.cpp conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24193: $? = 0 configure:24193: result: yes configure:24193: checking for sys/select.h configure:24193: result: yes configure:24193: checking for sys/socket.h configure:24193: result: yes configure:24203: checking types of arguments for select configure:24231: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24231: $? = 0 configure:24242: result: int,fd_set *,struct timeval * configure:24265: checking whether lstat correctly handles trailing slash configure:24291: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24291: $? = 0 configure:24291: ./conftest configure:24291: $? = 0 configure:24308: result: yes configure:24327: checking whether stat accepts an empty string configure:24347: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24347: $? = 0 configure:24347: ./conftest configure:24347: $? = 0 configure:24357: result: no configure:24373: checking whether strerror_r is declared configure:24373: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24373: $? = 0 configure:24373: result: yes configure:24386: checking for strerror_r configure:24386: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24386: $? = 0 configure:24386: result: yes configure:24395: checking whether strerror_r returns char * configure:24419: g++ -c -DNDEBUG -std=c++11 conftest.cpp >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24419: $? = 0 configure:24457: result: yes configure:24467: checking for strftime configure:24467: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24467: $? = 0 configure:24467: result: yes configure:24522: checking for vprintf configure:24522: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24522: $? = 0 configure:24522: result: yes configure:24528: checking for _doprnt configure:24528: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ /tmp/ccc2YBLM.o: In function `main': conftest.cpp:(.text+0x5): undefined reference to `_doprnt' collect2: error: ld returned 1 exit status configure:24528: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | #define HAVE_PTRDIFF_T 1 | #define HAVE_ALLOCA_H 1 | #define HAVE_ALLOCA 1 | #define HAVE_FORK 1 | #define HAVE_VFORK 1 | #define HAVE_WORKING_VFORK 1 | #define HAVE_WORKING_FORK 1 | #define HAVE_STDLIB_H 1 | #define HAVE_MALLOC 1 | #define HAVE_STDLIB_H 1 | #define HAVE_REALLOC 1 | #define HAVE_SYS_SELECT_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define SELECT_TYPE_ARG1 int | #define SELECT_TYPE_ARG234 (fd_set *) | #define SELECT_TYPE_ARG5 (struct timeval *) | #define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 | #define HAVE_DECL_STRERROR_R 1 | #define HAVE_STRERROR_R 1 | #define STRERROR_R_CHAR_P 1 | #define HAVE_STRFTIME 1 | #define HAVE_VPRINTF 1 | /* end confdefs.h. */ | /* Define _doprnt to an innocuous variant, in case declares _doprnt. | For example, HP-UX 11i declares gettimeofday. */ | #define _doprnt innocuous__doprnt | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char _doprnt (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef _doprnt | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char _doprnt (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub__doprnt || defined __stub____doprnt | choke me | #endif | | int | main () | { | return _doprnt (); | ; | return 0; | } configure:24528: result: no configure:24541: checking for strtoul configure:24541: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24541: $? = 0 configure:24541: result: yes configure:24552: checking for bzero configure:24552: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24552: $? = 0 configure:24552: result: yes configure:24563: checking for ftruncate configure:24563: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24563: $? = 0 configure:24563: result: yes configure:24574: checking for gethostbyname configure:24574: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24574: $? = 0 configure:24574: result: yes configure:24585: checking for gethostbyname_r configure:24585: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24585: $? = 0 configure:24585: result: yes configure:24596: checking for gettimeofday configure:24596: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24596: $? = 0 configure:24596: result: yes configure:24607: checking for memmove configure:24607: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24607: $? = 0 configure:24607: result: yes configure:24618: checking for memset configure:24618: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24618: $? = 0 configure:24618: result: yes configure:24629: checking for mkdir configure:24629: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24629: $? = 0 configure:24629: result: yes configure:24640: checking for realpath configure:24640: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24640: $? = 0 configure:24640: result: yes configure:24651: checking for select configure:24651: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24651: $? = 0 configure:24651: result: yes configure:24662: checking for setlocale configure:24662: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24662: $? = 0 configure:24662: result: yes configure:24673: checking for socket configure:24673: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24673: $? = 0 configure:24673: result: yes configure:24684: checking for strchr configure:24684: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24684: $? = 0 configure:24684: result: yes configure:24695: checking for strdup configure:24695: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24695: $? = 0 configure:24695: result: yes configure:24706: checking for strerror configure:24706: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24706: $? = 0 configure:24706: result: yes configure:24717: checking for strstr configure:24717: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24717: $? = 0 configure:24717: result: yes configure:24728: checking for strtol configure:24728: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24728: $? = 0 configure:24728: result: yes configure:24739: checking for sqrt configure:24739: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24739: $? = 0 configure:24739: result: yes configure:24750: checking for alarm configure:24750: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24750: $? = 0 configure:24750: result: yes configure:24761: checking for clock_gettime configure:24761: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24761: $? = 0 configure:24761: result: yes configure:24772: checking for sched_get_priority_min configure:24772: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24772: $? = 0 configure:24772: result: yes configure:24783: checking for sched_get_priority_max configure:24783: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24783: $? = 0 configure:24783: result: yes configure:24794: checking for inet_ntoa configure:24794: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24794: $? = 0 configure:24794: result: yes configure:24805: checking for pow configure:24805: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24805: $? = 0 configure:24805: result: yes configure:24818: checking the behavior of a signed right shift configure:24869: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24869: $? = 0 configure:24869: ./conftest configure:24869: $? = 0 configure:24928: g++ -o conftest -DNDEBUG -std=c++11 conftest.cpp -lssl -lcrypto -lrt -lpthread >&5 conftest.cpp:23:0: warning: "BISON_VERSION" redefined #define BISON_VERSION 3.0.2 ^ conftest.cpp:22:0: note: this is the location of the previous definition #define BISON_VERSION 0.0 ^ configure:24928: $? = 0 configure:24928: ./conftest configure:24928: $? = 1 configure: program exited with status 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "thrift" | #define PACKAGE_TARNAME "thrift" | #define PACKAGE_VERSION "0.9.3" | #define PACKAGE_STRING "thrift 0.9.3" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define PACKAGE "thrift" | #define VERSION "0.9.3" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define BISON_VERSION 0.0 | #define BISON_VERSION 3.0.2 | #define AUTOMAKE_VERSION 1.15 | #define HAVE_CXX11 1 | #define HAVE_BOOST /**/ | #define HAVE_LIBEVENT /**/ | #define STDC_HEADERS 1 | #define TIME_WITH_SYS_TIME 1 | #define HAVE_SYS_WAIT_H 1 | #define RETSIGTYPE void | #define HAVE_ARPA_INET_H 1 | #define HAVE_SYS_PARAM_H 1 | #define HAVE_FCNTL_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_LIMITS_H 1 | #define HAVE_NETDB_H 1 | #define HAVE_NETINET_IN_H 1 | #define HAVE_PTHREAD_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define HAVE_SYS_TIME_H 1 | #define HAVE_SYS_UN_H 1 | #define HAVE_SYS_POLL_H 1 | #define HAVE_SYS_RESOURCE_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_MALLOC_H 1 | #define HAVE_OPENSSL_SSL_H 1 | #define HAVE_OPENSSL_RAND_H 1 | #define HAVE_OPENSSL_X509V3_H 1 | #define HAVE_SCHED_H 1 | #define HAVE_WCHAR_H 1 | #define HAVE_LIBPTHREAD 1 | #define HAVE_LIBRT 1 | #define HAVE_PTRDIFF_T 1 | #define HAVE_ALLOCA_H 1 | #define HAVE_ALLOCA 1 | #define HAVE_FORK 1 | #define HAVE_VFORK 1 | #define HAVE_WORKING_VFORK 1 | #define HAVE_WORKING_FORK 1 | #define HAVE_STDLIB_H 1 | #define HAVE_MALLOC 1 | #define HAVE_STDLIB_H 1 | #define HAVE_REALLOC 1 | #define HAVE_SYS_SELECT_H 1 | #define HAVE_SYS_SOCKET_H 1 | #define SELECT_TYPE_ARG1 int | #define SELECT_TYPE_ARG234 (fd_set *) | #define SELECT_TYPE_ARG5 (struct timeval *) | #define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 | #define HAVE_DECL_STRERROR_R 1 | #define HAVE_STRERROR_R 1 | #define STRERROR_R_CHAR_P 1 | #define HAVE_STRFTIME 1 | #define HAVE_VPRINTF 1 | #define HAVE_STRTOUL 1 | #define HAVE_BZERO 1 | #define HAVE_FTRUNCATE 1 | #define HAVE_GETHOSTBYNAME 1 | #define HAVE_GETHOSTBYNAME_R 1 | #define HAVE_GETTIMEOFDAY 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKDIR 1 | #define HAVE_REALPATH 1 | #define HAVE_SELECT 1 | #define HAVE_SETLOCALE 1 | #define HAVE_SOCKET 1 | #define HAVE_STRCHR 1 | #define HAVE_STRDUP 1 | #define HAVE_STRERROR 1 | #define HAVE_STRSTR 1 | #define HAVE_STRTOL 1 | #define HAVE_SQRT 1 | #define HAVE_ALARM 1 | #define HAVE_CLOCK_GETTIME 1 | #define HAVE_SCHED_GET_PRIORITY_MIN 1 | #define HAVE_SCHED_GET_PRIORITY_MAX 1 | #define HAVE_INET_NTOA 1 | #define HAVE_POW 1 | /* end confdefs.h. */ | | int | main () | { | | return | /* 0xffffffff */ | -1 >> 1 != (signed)((unsigned)-1 >> 1) || | -1 >> 2 != (signed)((unsigned)-1 >> 2) || | -1 >> 3 != (signed)((unsigned)-1 >> 3) || | -1 >> 4 != (signed)((unsigned)-1 >> 4) || | -1 >> 8 != (signed)((unsigned)-1 >> 8) || | -1 >> 16 != (signed)((unsigned)-1 >> 16) || | -1 >> 24 != (signed)((unsigned)-1 >> 24) || | -1 >> 31 != (signed)((unsigned)-1 >> 31) || | /* 0x80000000 */ | (-2147483647 - 1) >> 1 != (signed)((unsigned)(-2147483647 - 1) >> 1) || | (-2147483647 - 1) >> 2 != (signed)((unsigned)(-2147483647 - 1) >> 2) || | (-2147483647 - 1) >> 3 != (signed)((unsigned)(-2147483647 - 1) >> 3) || | (-2147483647 - 1) >> 4 != (signed)((unsigned)(-2147483647 - 1) >> 4) || | (-2147483647 - 1) >> 8 != (signed)((unsigned)(-2147483647 - 1) >> 8) || | (-2147483647 - 1) >> 16 != (signed)((unsigned)(-2147483647 - 1) >> 16) || | (-2147483647 - 1) >> 24 != (signed)((unsigned)(-2147483647 - 1) >> 24) || | (-2147483647 - 1) >> 31 != (signed)((unsigned)(-2147483647 - 1) >> 31) || | /* 0x90800000 */ | -1870659584 >> 1 != (signed)((unsigned)-1870659584 >> 1) || | -1870659584 >> 2 != (signed)((unsigned)-1870659584 >> 2) || | -1870659584 >> 3 != (signed)((unsigned)-1870659584 >> 3) || | -1870659584 >> 4 != (signed)((unsigned)-1870659584 >> 4) || | -1870659584 >> 8 != (signed)((unsigned)-1870659584 >> 8) || | -1870659584 >> 16 != (signed)((unsigned)-1870659584 >> 16) || | -1870659584 >> 24 != (signed)((unsigned)-1870659584 >> 24) || | -1870659584 >> 31 != (signed)((unsigned)-1870659584 >> 31) || | 0; | | ; | return 0; | } configure:24968: result: arithmetic configure:25213: checking that generated files are newer than configure configure:25219: result: done configure:25398: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by thrift config.status 0.9.3, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on jefe.eecs.umich.edu config.status:1484: creating Makefile config.status:1484: creating compiler/cpp/Makefile config.status:1484: creating compiler/cpp/version.h config.status:1484: creating compiler/cpp/src/windows/version.h config.status:1484: creating lib/Makefile config.status:1484: creating lib/cpp/Makefile config.status:1484: creating lib/cpp/test/Makefile config.status:1484: creating lib/cpp/thrift-nb.pc config.status:1484: creating lib/cpp/thrift-z.pc config.status:1484: creating lib/cpp/thrift-qt.pc config.status:1484: creating lib/cpp/thrift-qt5.pc config.status:1484: creating lib/cpp/thrift.pc config.status:1484: creating lib/c_glib/Makefile config.status:1484: creating lib/c_glib/thrift_c_glib.pc config.status:1484: creating lib/c_glib/test/Makefile config.status:1484: creating lib/csharp/Makefile config.status:1484: creating lib/csharp/test/ThriftTest/Makefile config.status:1484: creating lib/d/Makefile config.status:1484: creating lib/d/test/Makefile config.status:1484: creating lib/erl/Makefile config.status:1484: creating lib/go/Makefile config.status:1484: creating lib/go/test/Makefile config.status:1484: creating lib/haxe/test/Makefile config.status:1484: creating lib/hs/Makefile config.status:1484: creating lib/java/Makefile config.status:1484: creating lib/js/test/Makefile config.status:1484: creating lib/nodejs/Makefile config.status:1484: creating lib/perl/Makefile config.status:1484: creating lib/perl/test/Makefile config.status:1484: creating lib/php/Makefile config.status:1484: creating lib/php/test/Makefile config.status:1484: creating lib/py/Makefile config.status:1484: creating lib/rb/Makefile config.status:1484: creating lib/lua/Makefile config.status:1484: creating test/Makefile config.status:1484: creating test/c_glib/Makefile config.status:1484: creating test/cpp/Makefile config.status:1484: creating test/erl/Makefile config.status:1484: creating test/go/Makefile config.status:1484: creating test/haxe/Makefile config.status:1484: creating test/hs/Makefile config.status:1484: creating test/php/Makefile config.status:1484: creating test/perl/Makefile config.status:1484: creating test/py/Makefile config.status:1484: creating test/py.twisted/Makefile config.status:1484: creating test/py.tornado/Makefile config.status:1484: creating test/rb/Makefile config.status:1484: creating tutorial/Makefile config.status:1484: creating tutorial/c_glib/Makefile config.status:1484: creating tutorial/cpp/Makefile config.status:1484: creating tutorial/go/Makefile config.status:1484: creating tutorial/haxe/Makefile config.status:1484: creating tutorial/hs/Makefile config.status:1484: creating tutorial/java/Makefile config.status:1484: creating tutorial/js/Makefile config.status:1484: creating tutorial/nodejs/Makefile config.status:1484: creating tutorial/py/Makefile config.status:1484: creating tutorial/py.twisted/Makefile config.status:1484: creating tutorial/py.tornado/Makefile config.status:1484: creating tutorial/rb/Makefile config.status:1484: creating config.h config.status:1665: config.h is unchanged config.status:1484: creating lib/cpp/src/thrift/config.h config.status:1665: lib/cpp/src/thrift/config.h is unchanged config.status:1713: executing depfiles commands config.status:1713: executing libtool commands ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-unknown-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_c_const=yes ac_cv_c_inline=inline ac_cv_c_int16_t=yes ac_cv_c_int32_t=yes ac_cv_c_int64_t=yes ac_cv_c_int8_t=yes ac_cv_c_uint16_t=yes ac_cv_c_uint32_t=yes ac_cv_c_uint64_t=yes ac_cv_c_uint8_t=yes ac_cv_c_volatile=yes ac_cv_cxx_compiler_gnu=yes ac_cv_env_CABAL_CONFIGURE_FLAGS_set= ac_cv_env_CABAL_CONFIGURE_FLAGS_value= ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set=set ac_cv_env_CC_value=gcc ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXCPP_set= ac_cv_env_CXXCPP_value= ac_cv_env_CXXFLAGS_set=set ac_cv_env_CXXFLAGS_value=-DNDEBUG ac_cv_env_CXX_set=set ac_cv_env_CXX_value=g++ ac_cv_env_DMD_LIBEVENT_FLAGS_set= ac_cv_env_DMD_LIBEVENT_FLAGS_value= ac_cv_env_DMD_OPENSSL_FLAGS_set= ac_cv_env_DMD_OPENSSL_FLAGS_value= ac_cv_env_D_IMPORT_PREFIX_set= ac_cv_env_D_IMPORT_PREFIX_value= ac_cv_env_ERLANG_INSTALL_LIB_DIR_set= ac_cv_env_ERLANG_INSTALL_LIB_DIR_thrift_set= ac_cv_env_ERLANG_INSTALL_LIB_DIR_thrift_value= ac_cv_env_ERLANG_INSTALL_LIB_DIR_value= ac_cv_env_ERLCFLAGS_set= ac_cv_env_ERLCFLAGS_value= ac_cv_env_ERLC_set= ac_cv_env_ERLC_value= ac_cv_env_ERL_set= ac_cv_env_ERL_value= ac_cv_env_GLIB_CFLAGS_set= ac_cv_env_GLIB_CFLAGS_value= ac_cv_env_GLIB_LIBS_set= ac_cv_env_GLIB_LIBS_value= ac_cv_env_GOBJECT_CFLAGS_set= ac_cv_env_GOBJECT_CFLAGS_value= ac_cv_env_GOBJECT_LIBS_set= ac_cv_env_GOBJECT_LIBS_value= ac_cv_env_INSTALLDIRS_set= ac_cv_env_INSTALLDIRS_value= ac_cv_env_JAVA_PREFIX_set= ac_cv_env_JAVA_PREFIX_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_LUA_INCLUDE_set= ac_cv_env_LUA_INCLUDE_value= ac_cv_env_LUA_LIB_set= ac_cv_env_LUA_LIB_value= ac_cv_env_LUA_set= ac_cv_env_LUA_value= ac_cv_env_MONO_CFLAGS_set= ac_cv_env_MONO_CFLAGS_value= ac_cv_env_MONO_LIBS_set= ac_cv_env_MONO_LIBS_value= ac_cv_env_PERL_PREFIX_set= ac_cv_env_PERL_PREFIX_value= ac_cv_env_PHP_CONFIG_PREFIX_set= ac_cv_env_PHP_CONFIG_PREFIX_value= ac_cv_env_PHP_PREFIX_set= ac_cv_env_PHP_PREFIX_value= ac_cv_env_PKG_CONFIG_LIBDIR_set= ac_cv_env_PKG_CONFIG_LIBDIR_value= ac_cv_env_PKG_CONFIG_PATH_set=set ac_cv_env_PKG_CONFIG_PATH_value=/usr/local/lib/pkgconfig/:/usr/local/lib64/pkgconfig/ ac_cv_env_PKG_CONFIG_set= ac_cv_env_PKG_CONFIG_value= ac_cv_env_PYTHON_set= ac_cv_env_PYTHON_value= ac_cv_env_PY_PREFIX_set= ac_cv_env_PY_PREFIX_value= ac_cv_env_QT5_CFLAGS_set= ac_cv_env_QT5_CFLAGS_value= ac_cv_env_QT5_LIBS_set= ac_cv_env_QT5_LIBS_value= ac_cv_env_QT_CFLAGS_set= ac_cv_env_QT_CFLAGS_value= ac_cv_env_QT_LIBS_set= ac_cv_env_QT_LIBS_value= ac_cv_env_RUBY_PREFIX_set= ac_cv_env_RUBY_PREFIX_value= ac_cv_env_YACC_set= ac_cv_env_YACC_value= ac_cv_env_YFLAGS_set= ac_cv_env_YFLAGS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func__doprnt=no ac_cv_func_alarm=yes ac_cv_func_alloca_works=yes ac_cv_func_bzero=yes ac_cv_func_clock_gettime=yes ac_cv_func_fork=yes ac_cv_func_fork_works=yes ac_cv_func_ftruncate=yes ac_cv_func_gethostbyname=yes ac_cv_func_gethostbyname_r=yes ac_cv_func_gettimeofday=yes ac_cv_func_inet_ntoa=yes ac_cv_func_lstat_dereferences_slashed_symlink=yes ac_cv_func_malloc_0_nonnull=yes ac_cv_func_memcmp_working=yes ac_cv_func_memmove=yes ac_cv_func_memset=yes ac_cv_func_mkdir=yes ac_cv_func_pow=yes ac_cv_func_realloc_0_nonnull=yes ac_cv_func_realpath=yes ac_cv_func_sched_get_priority_max=yes ac_cv_func_sched_get_priority_min=yes ac_cv_func_select=yes ac_cv_func_select_args='int,fd_set *,struct timeval *' ac_cv_func_setlocale=yes ac_cv_func_socket=yes ac_cv_func_sqrt=yes ac_cv_func_stat_empty_string_bug=no ac_cv_func_strchr=yes ac_cv_func_strdup=yes ac_cv_func_strerror=yes ac_cv_func_strerror_r=yes ac_cv_func_strerror_r_char_p=yes ac_cv_func_strftime=yes ac_cv_func_strstr=yes ac_cv_func_strtol=yes ac_cv_func_strtoul=yes ac_cv_func_vfork=yes ac_cv_func_vfork_works=yes ac_cv_func_vprintf=yes ac_cv_have_decl_AI_ADDRCONFIG=yes ac_cv_have_decl_strerror_r=yes ac_cv_header_arpa_inet_h=yes ac_cv_header_dlfcn_h=yes ac_cv_header_fcntl_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_libintl_h=yes ac_cv_header_limits_h=yes ac_cv_header_malloc_h=yes ac_cv_header_memory_h=yes ac_cv_header_netdb_h=yes ac_cv_header_netinet_in_h=yes ac_cv_header_openssl_rand_h=yes ac_cv_header_openssl_ssl_h=yes ac_cv_header_openssl_x509v3_h=yes ac_cv_header_pthread_h=yes ac_cv_header_sched_h=yes ac_cv_header_stdbool_h=no ac_cv_header_stdc=yes ac_cv_header_stddef_h=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_param_h=yes ac_cv_header_sys_poll_h=yes ac_cv_header_sys_resource_h=yes ac_cv_header_sys_select_h=yes ac_cv_header_sys_socket_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_time_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_sys_un_h=yes ac_cv_header_sys_wait_h=yes ac_cv_header_time=yes ac_cv_header_unistd_h=yes ac_cv_header_vfork_h=no ac_cv_header_wchar_h=yes ac_cv_host=x86_64-unknown-linux-gnu ac_cv_lib_crypto_BN_init=yes ac_cv_lib_lex='none needed' ac_cv_lib_pthread_pthread_create=yes ac_cv_lib_rt_clock_gettime=yes ac_cv_lib_socket_setsockopt=no ac_cv_lib_ssl_SSL_ctrl=yes ac_cv_objext=o ac_cv_path_EGREP='/usr/bin/grep -E' ac_cv_path_FGREP='/usr/bin/grep -F' ac_cv_path_GREP=/usr/bin/grep ac_cv_path_PKG_CONFIG=/usr/bin/pkg-config ac_cv_path_PYTHON=/usr/bin/python ac_cv_path_QT_MOC=/usr/bin/moc-qt4 ac_cv_path_SED=/usr/bin/sed ac_cv_path_ac_pt_PKG_CONFIG=/usr/bin/pkg-config ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/usr/bin/mkdir ac_cv_prog_AWK=gawk ac_cv_prog_CPP='gcc -E' ac_cv_prog_CXXCPP='g++ -E' ac_cv_prog_LEX=flex ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_AR=ar ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_OBJDUMP=objdump ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_cxx_g=yes ac_cv_prog_have_prog_bison=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=no ac_cv_prog_make_make_set=yes ac_cv_search_strerror='none required' ac_cv_struct_tm=time.h ac_cv_type__Bool=no ac_cv_type_mode_t=yes ac_cv_type_off_t=yes ac_cv_type_pid_t=yes ac_cv_type_ptrdiff_t=yes ac_cv_type_signal=void ac_cv_type_size_t=yes ac_cv_type_ssize_t=yes ac_cv_working_alloca_h=yes am_cv_CC_dependencies_compiler_type=gcc3 am_cv_CXX_dependencies_compiler_type=gcc3 am_cv_make_support_nested_variables=yes am_cv_pathless_PYTHON=python am_cv_prog_cc_c_o=yes am_cv_prog_tar_ustar=gnutar am_cv_python_platform=linux2 am_cv_python_pyexecdir='${exec_prefix}/lib64/python2.7/site-packages' am_cv_python_pythondir='${prefix}/lib/python2.7/site-packages' am_cv_python_version=2.7 ax_cv_cxx_compile_cxx11=no ax_cv_cxx_compile_cxx11__std_cpp11=yes lt_cv_ar_at_file=@ lt_cv_archive_cmds_need_lc=no lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_ld_reload_flag=-r lt_cv_nm_interface='BSD nm' lt_cv_objdir=.libs lt_cv_path_LD=/usr/bin/ld lt_cv_path_LDCXX='/usr/bin/ld -m elf_x86_64' lt_cv_path_NM='/usr/bin/nm -B' lt_cv_path_mainfest_tool=no lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_c_o_CXX=yes lt_cv_prog_compiler_pic='-fPIC -DPIC' lt_cv_prog_compiler_pic_CXX='-fPIC -DPIC' lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_pic_works_CXX=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=no lt_cv_prog_compiler_static_works_CXX=no lt_cv_prog_gnu_ld=yes lt_cv_prog_gnu_ldcxx=yes lt_cv_sharedlib_from_linklib_cmd='printf %s\n' lt_cv_shlibpath_overrides_runpath=no lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' lt_cv_sys_max_cmd_len=1572864 lt_cv_to_host_file_cmd=func_convert_file_noop lt_cv_to_tool_file_cmd=func_convert_file_noop pkg_cv_GLIB_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include ' pkg_cv_GLIB_LIBS='-lglib-2.0 ' pkg_cv_GOBJECT_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include ' pkg_cv_GOBJECT_LIBS='-lgobject-2.0 -lglib-2.0 ' pkg_cv_QT_CFLAGS='-DQT_SHARED -I/usr/include/QtNetwork -I/usr/include/QtCore ' pkg_cv_QT_LIBS='-lQtNetwork -lQtCore ' ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /home/anastas/Downloads/thrift-0.9.3/missing aclocal-1.14' ALLOCA='' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='$${TAR-tar}' AMX_HAVE_LIBEVENT_FALSE='#' AMX_HAVE_LIBEVENT_TRUE='' AMX_HAVE_QT5_FALSE='' AMX_HAVE_QT5_TRUE='#' AMX_HAVE_QT_FALSE='#' AMX_HAVE_QT_TRUE='' AMX_HAVE_ZLIB_FALSE='#' AMX_HAVE_ZLIB_TRUE='' AM_BACKSLASH='\' AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' AM_DEFAULT_VERBOSITY='1' AM_V='$(V)' ANT='' ANT_FLAGS='' AR='ar' AUTOCONF='${SHELL} /home/anastas/Downloads/thrift-0.9.3/missing autoconf' AUTOHEADER='${SHELL} /home/anastas/Downloads/thrift-0.9.3/missing autoheader' AUTOMAKE='${SHELL} /home/anastas/Downloads/thrift-0.9.3/missing automake-1.14' AWK='gawk' BISON='bison' BISON_USE_PARSER_H_EXTENSION_FALSE='' BISON_USE_PARSER_H_EXTENSION_TRUE='#' BOOST_CHRONO_LDADD='/usr/lib64/libboost_chrono.a' BOOST_CPPFLAGS='-I/usr/include' BOOST_FILESYSTEM_LDADD='/usr/lib64/libboost_filesystem.a' BOOST_LDFLAGS='-L/usr/lib64' BOOST_LIB_DIR='/usr/lib64' BOOST_SYSTEM_LDADD='/usr/lib64/libboost_system.a' BOOST_TEST_LDADD='/usr/lib64/libboost_unit_test_framework.a' BOOST_THREAD_LDADD='/usr/lib64/libboost_thread.a' BUNDLER='' CABAL='true' CABAL_CONFIGURE_FLAGS='' CC='gcc' CCDEPMODE='depmode=gcc3' CFLAGS='-g -O2' CLASSPATH='' CPP='gcc -E' CPPFLAGS='' CPPSTYLE_CMD='find . -type f \( -iname "*.h" -or -iname "*.cpp" -or -iname "*.cc" -or -iname "*.tcc" \) -printf "Reformatting: %h/%f\n" -exec clang-format -i {} \;' CXX='g++' CXXCPP='g++ -E' CXXDEPMODE='depmode=gcc3' CXXFLAGS='-DNDEBUG -std=c++11' CYGPATH_W='echo' DEFS='-DHAVE_CONFIG_H' DEPDIR='.deps' DLLTOOL='false' DMD='' DMD_LIBEVENT_FLAGS='' DMD_OF_DIRSEP='' DMD_OPENSSL_FLAGS='' DMD_OPTLINK_FALSE='' DMD_OPTLINK_TRUE='#' DSYMUTIL='' DUMPBIN='' D_EVENT_LIB_NAME='libthriftd-event.a' D_IMPORT_PREFIX='${prefix}/include/d2' D_LIB_NAME='libthriftd.a' D_SSL_LIB_NAME='libthriftd-ssl.a' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/usr/bin/grep -E' ENABLE_COVERAGE='2' ERL='' ERLANG_INSTALL_LIB_DIR='' ERLANG_INSTALL_LIB_DIR_thrift='' ERLANG_LIB_DIR='' ERLANG_OTP16_FALSE='' ERLANG_OTP16_TRUE='#' ERLC='' ERLCFLAGS='' EXEEXT='' FGREP='/usr/bin/grep -F' GCOV_CFLAGS='' GCOV_CXXFLAGS='' GCOV_LDFLAGS='' GLIB_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include ' GLIB_LIBS='-lglib-2.0 ' GO='' GOBJECT_CFLAGS='-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include ' GOBJECT_LIBS='-lgobject-2.0 -lglib-2.0 ' GREP='/usr/bin/grep' HAVE_BUNDLER_FALSE='' HAVE_BUNDLER_TRUE='#' HAVE_CXX11='1' HAVE_DEIMOS_EVENT2_FALSE='' HAVE_DEIMOS_EVENT2_TRUE='#' HAVE_DEIMOS_OPENSSL_FALSE='' HAVE_DEIMOS_OPENSSL_TRUE='#' HAVE_NPM_FALSE='' HAVE_NPM_TRUE='#' HAVE_PHPUNIT_FALSE='' HAVE_PHPUNIT_TRUE='#' HAXE='' HAXE_VERSION='' INSTALLDIRS='vendor' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' JAVA_PREFIX='/usr/local/lib' LD='/usr/bin/ld -m elf_x86_64' LDFLAGS='' LEX='flex' LEXLIB='' LEX_OUTPUT_ROOT='lex.yy' LIBEVENT_CPPFLAGS='' LIBEVENT_LDFLAGS='' LIBEVENT_LIBS='-levent' LIBOBJS='' LIBS='-lssl -lcrypto -lrt -lpthread ' LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIPO='' LN_S='ln -s' LTLIBOBJS='' LUA='' LUA_EXEC_PREFIX='' LUA_INCLUDE='' LUA_LIB='' LUA_PLATFORM='' LUA_PREFIX='' LUA_SHORT_VERSION='' LUA_VERSION='' MAKEINFO='${SHELL} /home/anastas/Downloads/thrift-0.9.3/missing makeinfo' MANIFEST_TOOL=':' MAYBE_CPP='cpp' MAYBE_CSHARP='' MAYBE_C_GLIB='c_glib' MAYBE_GO='' MAYBE_HASKELL='' MAYBE_JAVA='' MAYBE_NODEJS='' MAYBE_PERL='' MAYBE_PHP='' MAYBE_PYTHON='' MAYBE_RUBY='' MCS='' MINGW_FALSE='' MINGW_TRUE='#' MKDIR_P='/usr/bin/mkdir -p' MONO_CFLAGS='' MONO_LIBS='' MONO_MCS_FALSE='' MONO_MCS_TRUE='#' NET_2_0_FALSE='' NET_2_0_TRUE='#' NM='/usr/bin/nm -B' NMEDIT='' NODEJS='' NPM='' OBJDUMP='objdump' OBJEXT='o' OPENSSL_INCLUDES='' OPENSSL_LDFLAGS='' OPENSSL_LIBS='-lssl -lcrypto ' OTOOL64='' OTOOL='' PACKAGE='thrift' PACKAGE_BUGREPORT='' PACKAGE_NAME='thrift' PACKAGE_STRING='thrift 0.9.3' PACKAGE_TARNAME='thrift' PACKAGE_URL='' PACKAGE_VERSION='0.9.3' PATH_SEPARATOR=':' PERL='' PERL_PREFIX='/usr/local' PHP='' PHPUNIT='' PHP_CONFIG='' PHP_CONFIG_PREFIX='/etc/php.d' PHP_PREFIX='/usr/lib/php' PKG_CONFIG='/usr/bin/pkg-config' PKG_CONFIG_LIBDIR='' PKG_CONFIG_PATH='/usr/local/lib/pkgconfig/:/usr/local/lib64/pkgconfig/' PYTHON='/usr/bin/python' PYTHON_EXEC_PREFIX='${exec_prefix}' PYTHON_PLATFORM='linux2' PYTHON_PREFIX='${prefix}' PYTHON_VERSION='2.7' PY_PREFIX='/usr' QT5_CFLAGS='' QT5_LIBS='' QT5_MOC='' QT5_REDUCE_RELOCATIONS_FALSE='' QT5_REDUCE_RELOCATIONS_TRUE='#' QT_CFLAGS='-DQT_SHARED -I/usr/include/QtNetwork -I/usr/include/QtCore ' QT_LIBS='-lQtNetwork -lQtCore ' QT_MOC='/usr/bin/moc-qt4' RANLIB='ranlib' RUBY='' RUBY_PREFIX='' RUNHASKELL='true' SED='/usr/bin/sed' SET_MAKE='' SHELL='/bin/sh' STRIP='strip' TRIAL='' VERSION='0.9.3' WITH_BOOSTTHREADS_FALSE='' WITH_BOOSTTHREADS_TRUE='#' WITH_CPP_FALSE='#' WITH_CPP_TRUE='' WITH_C_GLIB_FALSE='#' WITH_C_GLIB_TRUE='' WITH_D_EVENT_TESTS_FALSE='' WITH_D_EVENT_TESTS_TRUE='#' WITH_D_FALSE='' WITH_D_SSL_TESTS_FALSE='' WITH_D_SSL_TESTS_TRUE='#' WITH_D_TRUE='#' WITH_ERLANG_FALSE='' WITH_ERLANG_TRUE='#' WITH_GO_FALSE='' WITH_GO_TRUE='#' WITH_HASKELL_FALSE='' WITH_HASKELL_TRUE='#' WITH_HAXE_FALSE='' WITH_HAXE_TRUE='#' WITH_JAVA_FALSE='' WITH_JAVA_TRUE='#' WITH_LUA_FALSE='' WITH_LUA_TRUE='#' WITH_MONO_FALSE='' WITH_MONO_TRUE='#' WITH_NODEJS_FALSE='' WITH_NODEJS_TRUE='#' WITH_PERL_FALSE='' WITH_PERL_TRUE='#' WITH_PHP_EXTENSION_FALSE='' WITH_PHP_EXTENSION_TRUE='#' WITH_PHP_FALSE='' WITH_PHP_TRUE='#' WITH_PYTHON_FALSE='' WITH_PYTHON_TRUE='#' WITH_RUBY_FALSE='' WITH_RUBY_TRUE='#' WITH_TESTS_FALSE='' WITH_TESTS_TRUE='#' WITH_TUTORIAL_FALSE='' WITH_TUTORIAL_TRUE='#' YACC='bison -y' YFLAGS='' ZLIB_CPPFLAGS='' ZLIB_LDFLAGS='' ZLIB_LIBS='' ac_ct_AR='ar' ac_ct_CC='gcc' ac_ct_CXX='' ac_ct_DUMPBIN='' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='#' am__fastdepCC_FALSE='#' am__fastdepCC_TRUE='' am__fastdepCXX_FALSE='#' am__fastdepCXX_TRUE='' am__include='include' am__isrc='' am__leading_dot='.' am__nodep='_no' am__quote='' am__tar='tar --format=ustar -chf - "$$tardir"' am__untar='tar -xf -' bindir='${exec_prefix}/bin' build='x86_64-unknown-linux-gnu' build_alias='' build_cpu='x86_64' build_os='linux-gnu' build_vendor='unknown' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='${prefix}' golang_version='' have_prog_bison='yes' host='x86_64-unknown-linux-gnu' host_alias='' host_cpu='x86_64' host_os='linux-gnu' host_vendor='unknown' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /home/anastas/Downloads/thrift-0.9.3/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' luadir='' luaexecdir='' mandir='${datarootdir}/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' pkgluadir='' pkgluaexecdir='' pkgpyexecdir='${pyexecdir}/thrift' pkgpythondir='${pythondir}/thrift' prefix='/usr/local' program_transform_name='s,x,x,' psdir='${docdir}' pyexecdir='${exec_prefix}/lib64/python2.7/site-packages' pythondir='${prefix}/lib/python2.7/site-packages' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' subdirs='' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "thrift" #define PACKAGE_TARNAME "thrift" #define PACKAGE_VERSION "0.9.3" #define PACKAGE_STRING "thrift 0.9.3" #define PACKAGE_BUGREPORT "" #define PACKAGE_URL "" #define PACKAGE "thrift" #define VERSION "0.9.3" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_DLFCN_H 1 #define LT_OBJDIR ".libs/" #define BISON_VERSION 0.0 #define BISON_VERSION 3.0.2 #define AUTOMAKE_VERSION 1.15 #define HAVE_CXX11 1 #define HAVE_BOOST /**/ #define HAVE_LIBEVENT /**/ #define STDC_HEADERS 1 #define TIME_WITH_SYS_TIME 1 #define HAVE_SYS_WAIT_H 1 #define RETSIGTYPE void #define HAVE_ARPA_INET_H 1 #define HAVE_SYS_PARAM_H 1 #define HAVE_FCNTL_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_LIMITS_H 1 #define HAVE_NETDB_H 1 #define HAVE_NETINET_IN_H 1 #define HAVE_PTHREAD_H 1 #define HAVE_STDDEF_H 1 #define HAVE_STDLIB_H 1 #define HAVE_SYS_SOCKET_H 1 #define HAVE_SYS_TIME_H 1 #define HAVE_SYS_UN_H 1 #define HAVE_SYS_POLL_H 1 #define HAVE_SYS_RESOURCE_H 1 #define HAVE_UNISTD_H 1 #define HAVE_LIBINTL_H 1 #define HAVE_MALLOC_H 1 #define HAVE_OPENSSL_SSL_H 1 #define HAVE_OPENSSL_RAND_H 1 #define HAVE_OPENSSL_X509V3_H 1 #define HAVE_SCHED_H 1 #define HAVE_WCHAR_H 1 #define HAVE_LIBPTHREAD 1 #define HAVE_LIBRT 1 #define HAVE_PTRDIFF_T 1 #define HAVE_ALLOCA_H 1 #define HAVE_ALLOCA 1 #define HAVE_FORK 1 #define HAVE_VFORK 1 #define HAVE_WORKING_VFORK 1 #define HAVE_WORKING_FORK 1 #define HAVE_STDLIB_H 1 #define HAVE_MALLOC 1 #define HAVE_STDLIB_H 1 #define HAVE_REALLOC 1 #define HAVE_SYS_SELECT_H 1 #define HAVE_SYS_SOCKET_H 1 #define SELECT_TYPE_ARG1 int #define SELECT_TYPE_ARG234 (fd_set *) #define SELECT_TYPE_ARG5 (struct timeval *) #define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 #define HAVE_DECL_STRERROR_R 1 #define HAVE_STRERROR_R 1 #define STRERROR_R_CHAR_P 1 #define HAVE_STRFTIME 1 #define HAVE_VPRINTF 1 #define HAVE_STRTOUL 1 #define HAVE_BZERO 1 #define HAVE_FTRUNCATE 1 #define HAVE_GETHOSTBYNAME 1 #define HAVE_GETHOSTBYNAME_R 1 #define HAVE_GETTIMEOFDAY 1 #define HAVE_MEMMOVE 1 #define HAVE_MEMSET 1 #define HAVE_MKDIR 1 #define HAVE_REALPATH 1 #define HAVE_SELECT 1 #define HAVE_SETLOCALE 1 #define HAVE_SOCKET 1 #define HAVE_STRCHR 1 #define HAVE_STRDUP 1 #define HAVE_STRERROR 1 #define HAVE_STRSTR 1 #define HAVE_STRTOL 1 #define HAVE_SQRT 1 #define HAVE_ALARM 1 #define HAVE_CLOCK_GETTIME 1 #define HAVE_SCHED_GET_PRIORITY_MIN 1 #define HAVE_SCHED_GET_PRIORITY_MAX 1 #define HAVE_INET_NTOA 1 #define HAVE_POW 1 #define ARITHMETIC_RIGHT_SHIFT 1 #define LOGICAL_RIGHT_SHIFT 2 #define UNKNOWN_RIGHT_SHIFT 3 #define SIGNED_RIGHT_SHIFT_IS 1 configure: exit 0