Re: [Discuss-gnuradio] gnuradio compiles no more on my computer, cannot figure out why

[Lecoq Yann]

Hi Marcus,

You were right, a thorough cleaning of everything uhd related solved the issue,

Thanks for your help !

-Yann


Le Mercredi 6 Janvier 2016 13:37 CET, Marcus Müller <address@hidden> a écrit:

> Hi Yann,
>
> this looks familiar; there was someone else with pretty exactly the same
> problem, and the underlying complication was that there were two
> installations of UHD header files.
> Make sure only one UHD is installed, and try again.
>
> Best regards,
> Marcus
>
> On 06.01.2016 12:50, Lecoq Yann wrote:
> > Hello and a happy new year to all,
> >
> > I used to compile gnuradio and uhd from git repos on a ubuntu 14.04 
> > computer and, for whatever reason, the gnuradio compilation don't work 
> > anymore. There must be something I modified in the config that triggered 
> > that, but I can't figure out what (I started wanting to to recompile in 
> > order to activate comedi after installing the libcomedi-dev package, but 
> > wether this one is installed or nt dosnt help).
> >
> > Typically I do a uhd cmake, make -j8, sudo make install and sudo ldconfig 
> > (which all look like they still work fine), and, then, a gnuradio cmake, 
> > make -j8, sudo make install and sudo ldconfig. Now, the gnuradio make stops 
> > with an error which looks related to the gr-uhd/swig component (see the 
> > console output at the end of this message).
> >
> > To be sure, I used git to compile different combination of commits for both 
> > uhd and gnuradio, including at least 1 uhd+gnuradio commit combination 
> > which I am absolutely certain works on another similar computer, but it 
> > didn't help. I also tried removing entirely the source code in my ~/src 
> > directory and restarting from scrach (after some apt-get autoremove, update 
> > and upgrade) with M. Leech's "build_gnuradio" script, but this failed as 
> > well at the same point. Note that the check of prerequisites at the 
> > beginning of the script doesn't report anything missing though (except a 
> > usual libzmq1 issue which has never been a problem) (see end of message).
> >
> > Any help is greatly appreciated, as I am running out of ideas to check at 
> > this point...
> >
> > Best wishes,
> >
> > -Yann
> >
> >
> >
> > *** CONSOLE OUTPUT NEAR GNURADIO MAKING ERROR ***
> > Scanning dependencies of target _wxgui_swig
> > [ 57%] Building CXX object 
> > gr-wxgui/swig/CMakeFiles/_wxgui_swig.dir/wxgui_swigPYTHON_wrap.cxx.o
> > [ 57%] Built target pygen_gr_wavelet_swig_57e27
> > [ 57%] Building CXX object 
> > gr-blocks/lib/CMakeFiles/gnuradio-blocks.dir/file_sink_impl.cc.o
> > [ 57%] Building CXX object 
> > gr-blocks/lib/CMakeFiles/gnuradio-blocks.dir/file_source_impl.cc.o
> > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In 
> > function ‘void init_uhd_swig()’:
> > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46579:91:
> >  error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’
> >    SWIG_Python_SetConstant(d, 
> > "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int 
> > >(uhd::usrp::dboard_iface::ATR_REG_IDLE)));
> >                                                                             
> >                ^
> > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46580:94:
> >  error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
> >    SWIG_Python_SetConstant(d, 
> > "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int 
> > >(uhd::usrp::dboard_iface::ATR_REG_TX_ONLY)));
> >                                                                             
> >                   ^
> > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46581:94:
> >  error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
> >    SWIG_Python_SetConstant(d, 
> > "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int 
> > >(uhd::usrp::dboard_iface::ATR_REG_RX_ONLY)));
> >                                                                             
> >                   ^
> > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46582:98:
> >  error: ‘ATR_REG_FULL_DUPLEX’ is not a member of ‘uhd::usrp::dboard_iface’
> >    SWIG_Python_SetConstant(d, 
> > "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int 
> > >(uhd::usrp::dboard_iface::ATR_REG_FULL_DUPLEX)));
> >                                                                             
> >                       ^
> > [ 57%] Building CXX object 
> > gr-blocks/lib/CMakeFiles/gnuradio-blocks.dir/file_meta_sink_impl.cc.o
> > make[2]: *** 
> > [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Erreur 1
> > make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Erreur 2
> >
> >
> >
> > *** CONSOLE OUTPUT FOR BUILD-GNURADIO PREREQS SCRIPT
> > Installing prerequisites.
> > ====> THIS MAY TAKE QUITE SOME TIME <=====
> > Checking for package libfontconfig1-dev
> > Checking for package libxrender-dev
> > Checking for package libpulse-dev
> > Checking for package swig
> > Checking for package g++
> > Checking for package automake
> > Checking for package autoconf
> > Checking for package libtool
> > Checking for package python-dev
> > Checking for package libfftw3-dev
> > Checking for package libcppunit-dev
> > Checking for package libboost-all-dev
> > Checking for package libusb-dev
> > Checking for package libusb-1.0-0-dev
> > Checking for package fort77
> > Checking for package libsdl1.2-dev
> > Checking for package python-wxgtk2.8
> > Checking for package git-core
> > Checking for package libqt4-dev
> > Checking for package python-numpy
> > Checking for package ccache
> > Checking for package python-opengl
> > Checking for package libgsl0-dev
> > Checking for package python-cheetah
> > Checking for package python-mako
> > Checking for package python-lxml
> > Checking for package doxygen
> > Checking for package qt4-default
> > Checking for package qt4-dev-tools
> > Checking for package libusb-1.0-0-dev
> > Checking for package libqwt5-qt4-dev
> > Checking for package libqwtplot3d-qt4-dev
> > Checking for package pyqt4-dev-tools
> > Checking for package python-qwt5-qt4
> > Checking for package cmake
> > Checking for package git-core
> > Checking for package wget
> > Checking for package libxi-dev
> > Checking for package python-docutils
> > Checking for package gtk2-engines-pixbuf
> > Checking for package r-base-dev
> > Checking for package python-tk
> > Checking for package liborc-0.4-0
> > Checking for package liborc-0.4-dev
> > Checking for package libasound2-dev
> > Checking for package python-gtk2
> > Checking for package libzmq1
> > Checking for package libzmq1-dev
> > Failed to find package 'libzmq1-dev' in known package repositories

> > SOME THINGS MAY NOT BUILD AS A RESULT
> > Checking for package libzmq
> > Checking for package libzmq-dev
> > Checking for package python-requests
> > Done checking packages
> > Checking for library libusb ...Found library libusb
> > Checking for library libboost ...Found library libboost
> > Checking for library libcppunit ...Found library libcppunit
> > Checking for library libfftw ...Found library libfftw
> > Checking for library libgsl ...Found library libgsl
> > Done
> >
> >
> >
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio