|
From: | Yan Huang |
Subject: | [Discuss-gnuradio] The threshold of energy detection |
Date: | Fri, 12 Feb 2016 11:02:58 +0000 |
Hi all, I’m using USRP B210 to do spectrum sensing, and the flow graph as attached file. It can get a result that there is a peak at 5.8 GHz which is the receiving signal frequency. But if I change the Moving Average block to a threshold, there is no output like previous one. I want to ask how can I get a result have a peak at 5.8 GHz in frequency domain using threshold. I can only get 1 or 0 in time domain not in frequency domain. Is there anyone can give me some advice? Thanks in advance. Yours Sincerely Yan This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. |
spectrum sensing.png
Description: spectrum sensing.png
result of spectrum sensing.png
Description: result of spectrum sensing.png
[Prev in Thread] | Current Thread | [Next in Thread] |