|
From: | avinash kalyanaraman |
Subject: | Re: [Discuss-gnuradio] Running tx_ofdm.grc and rx_ofdm.grc together |
Date: | Fri, 17 Jun 2016 04:49:35 +1200 |
Hello all,I have a setup that involves 2 N210s with the WBX daughterboard, one being the TX_OFDM and other being RX_OFDM.I am trying to run tx_ofdm.grc and rx_ofdm. I modify tx_ofdm to send a file instead of random source. I modify rx_ofdm.grc to write to a file in the end. I modify them also to use the USRP Sink & Source blocks. I haven't made any other modifications to the receiver and transmitter.However, the received file at the receiver is empty. I set the USRPs to run at our desired frequency of 900MHz.Also attached are the transmit and receive signal spectrums. It appears that I am not getting the desired OFDM spectrum.In the console at the RX, I repeatedly see:gr::log :INFO: packet_headerparser_b0 - Detected an invalid packet at item 5908032gr::log :INFO: header_payload_demux0 - Parser returned #fI also tried modifying the gain at the TX and Rx, but that didn't help. I tried changing the multiplication constant at the Tx too. But that didn't help as well.Both the TX and RX have the same (default : BPSK for header and QPSK for payload) modulation scheme as well. Please let me know if there is anything else I need to match between TX and RX ?Thanks,--Avinash
tx_flowgraph.png
Description: PNG image
[Prev in Thread] | Current Thread | [Next in Thread] |