[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] USRP B200 Not Transmitting

From: Derek Kozel
Subject: Re: [Discuss-gnuradio] USRP B200 Not Transmitting
Date: Wed, 31 Aug 2016 23:49:40 -0700

Hello Hasini,

The USRP-users mailing list is an excellent place to ask such questions.

I do not have experience with the dpsk flowgraphs. Have you verified that you can see a simple sinewave from one B200 to another? uhd_fft and uhd_siggen_gui are excellent tools for testing that. When transmitting with the B200, do you see the TX LED come on and the RX LED on the other one?


On Wed, Aug 31, 2016 at 10:31 PM, Hasini Abeywickrama <address@hidden> wrote:

I have a USRP B200 set to transmit a signal (using uhd_tx_dpsk.grc in the GNURadio examples) and another USRP B200 receive the signal (using uhd_rx_dpsk.grc in the GNURadio examples). But the receiving USRP does not receive the signal that is being transmitted by the other USRP, even though they are placed very close to each other.

If I user a USRP2 as the transmitter the receiver can receive the signal without any issue.

Can someone please suggest what might be the problem with this. (Please excuse if this is not directly related to GNU Radio)


Discuss-gnuradio mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]