Re: [Discuss-gnuradio] PyBombs installation issue

[Marcus Müller]

Possibly just a temporary failure then; github or your network might have had problems :)

Cheers,

Marcus

On 17.01.2017 08:01, Usman Haider wrote:

Hello Marcus,

I am surprised the following command ran successfully.

$ pybombs -vv recipes add gr-recipes git+https://github.com/gnuradio/gr-recipes.git

--

Usman

On Mon, Jan 16, 2017 at 5:10 PM, Marcus Müller <address@hidden> wrote:

Hm, interesting. Could you run your pybombs command with "-vv"?

Best regards,

Marcus

On 01/16/2017 12:55 PM, Usman Haider wrote:

Hello Nicolas,

Thanks for your reply. I have sufficient disk space, more than 400 GB,  so that is not an issue.  I do not have any .gitconfig file in my home directory. I can download the recipes manually using the command you mentioned.

git clone https://github.com/gnuradio/gr-recipes.git gr-recipes

Please let me know if you need any further information. Thanks.

--

Usman

On Mon, Jan 16, 2017 at 3:21 PM, Nicolas Cuervo <address@hidden> wrote:

Hello Usman,

uhm, this is odd. So far I can see the command is correct. Although error 128 means that git did not exit cleanly, and I just run it and it ran fine. Just some guesses for now:

1. Do you have enough disk space? the recipes do not require a lot of disk space, though, but not enough space would lead to this.

2. Do you have specific cloning configuration in your gitconfig? you can check this by typing:

    git config --global --edit

 or just by editing .gitconfig which is normally located at your home directory.

3. Can you clone anything else manually? you can try running:
   

     git clone https://github.com/gnuradio/gr-recipes.git gr-recipes

  just as a test that your git is working as expected.

Please let us know if you find out something with this hypothesis I mentioned.

Cheers,

- Nicolas

On Mon, Jan 16, 2017 at 9:46 AM, Usman Haider <address@hidden> wrote:

I am following this guide to get started with RFNoC.  I am using Ubuntu 14.04 and I ran following commands

$ sudo apt-get install git
$ sudo apt-get install python-setuptools python-dev build-essential 
$ sudo easy_install pip
$ sudo pip install git+https://github.com/gnuradio/pybombs.git

When I run following command

$ pybombs -v recipes add gr-recipes git+https://github.com/gnuradio/gr-recipes.git

I get output.

..... ..... ..... OMBS.PackageManager - DEBUG - Checking if package git is installed... PyBOMBS.Packager.apt - DEBUG - Package git has version 1.9.1 installed PyBOMBS.install_manager - DEBUG - Phase 2: Recursively installing source packages to prefix: PyBOMBS.Fetcher.git - DEBUG - Requirements met. PyBOMBS.Fetcher.git - DEBUG - Using url - https://github.com/gnuradio/gr-recipes.git PyBOMBS._process_thread() - DEBUG - Executing command `git clone https://github.com/gnuradio/gr-recipes.git gr-recipes' Cloning:     [                 PyBOMBS.recipes - ERROR - Could not fetch recipesCloning:     [ PyBOMBS.recipes - ERROR - Could not fetch recipes: Process returnCloning:     (100%) [=========================================================] PyBOMBS.monitor_process() - DEBUG - Thread signaled termination or returned PyBOMBS.monitor_process() - DEBUG - Return value: 128 PyBOMBS.recipes - ERROR - Could not fetch recipes: Process returned value: 128

What could be the issue? pybombs version is 2.3.1a. Thanks --

Usman

_______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio