Re: [Discuss-gnuradio] test and build errors on 3.7.12git-101-g098dc3e0

[address@hidden]

I'm afraid you are going to have to dumb it down for me. I don't see
where to enter the path to the git repository. In other words

git checkout v3.7.11

needs to know the location of the git source. Doing some googling, it
looks like that is for a situation where the git source is local.

Basically I need the full command line or procedure.

This is the best link I can find on doing a git checkout on a remote,
and it goes on and on, not really resolving the problem.
http://stackoverflow.com/questions/1783405/how-to-check-out-a-remote-git-branch

In the meantime, I will compile the newest version without thrift
installed, which hopefully will skip those modules.

 On Sat, 29 Apr 2017
19:01:34 -0700 Ron Economos <address@hidden> wrote:

> git checkout v3.7.11
> 
> But you're still going to have the same test failures. It's not 
> something new.
> 
> Ron
> 
> On 04/29/2017 06:57 PM, address@hidden wrote:
> > How do I go back one rev on github?
> >
> >
> >    Original Message
> > From: Cinaed Simson
> > Sent: Saturday, April 29, 2017 6:42 PM
> > To: address@hidden
> > Subject: Re: [Discuss-gnuradio] test and build errors on
> > 3.7.12git-101-g098dc3e0
> >
> > On 04/29/2017 05:52 PM, address@hidden wrote:  
> >> I have ZMQ. Here is the cmake finding it:
> >>
> >> -- Configuring gr-wxgui support...
> >> -- Dependency ENABLE_GNURADIO_RUNTIME = ON
> >> -- Dependency ENABLE_GR_FFT = ON
> >> -- Dependency ENABLE_GR_FILTER = ON
> >> -- Dependency ENABLE_GR_ANALOG = ON
> >> -- Dependency ENABLE_PYTHON = ON
> >> -- Dependency NUMPY_FOUND = TRUE
> >> -- Dependency WX_FOUND = TRUE
> >> -- Enabling gr-wxgui support.
> >> -- Override with -DENABLE_GR_WXGUI=ON/OFF
> >> -- Checking for module 'libzmq'
> >> -- Found libzmq, version 4.1.2
> >> -- Found ZEROMQ: /usr/lib64/libzmq.so
> >> ----------------------------------------
> >> I also have scipy, though I don't see it being looked for in the
> >> cmake.  
> > I'm running a release version - 3.7.11 - you're on 3.7.12 which is
> > on the bleeding edge so your mileage may vary - it's work in
> > progress unless I missed the email of its release.
> >
> > The test for polar uses python-scipy which requires scipy.
> >
> > See
> >
> > ./gnuradio-3.7.11/gr-fec/python/fec/polar/channel_construction_awgn.py
> >
> > which imports
> >
> > from scipy.optimize import fsolve
> > from scipy.special import erfc
> >
> > In general, you need to run the run the qa scripts in the
> > directories where the tests failed - assuming all the CMake
> > configure errors or the software not found messages have been
> > cleared.
> >
> > -- Cinaed
> >  
> >> I missed this one, but I also have libcodec2.
> >>
> >> -- Configuring gr-vocoder support...
> >> -- Dependency Boost_FOUND = 1
> >> -- Dependency ENABLE_GNURADIO_RUNTIME = ON
> >> -- Dependency ENABLE_GR_FFT = ON
> >> -- Dependency ENABLE_GR_BLOCKS = ON
> >> -- Dependency ENABLE_GR_FILTER = ON
> >> -- Dependency ENABLE_GR_ANALOG = ON
> >> -- Enabling gr-vocoder support.
> >> -- Override with -DENABLE_GR_VOCODER=ON/OFF
> >> -- Found libgsm: /usr/include/gsm, /usr/lib64/libgsm.so
> >> -- System libcodec2 not found.
> >> -- Checking for module 'libusb-1.0'
> >> -- Found libusb-1.0, version 1.0.20
> >> -- Found
> >> libusb-1.0: /usr/include/libusb-1.0, /usr/lib64/libusb-1.0.so
> >>
> >>
> >>
> >>
> >> On Sat, 29 Apr 2017 12:05:30 -0700
> >> Ron Economos <address@hidden> wrote:
> >>  
> >>> For the polar encoder/decoder and zeromq tests, you need the
> >>> following dependencies. I'm not sure about the other failures.
> >>>
> >>> python-scipy
> >>>
> >>> python-zmq
> >>>
> >>> Ron
> >>>
> >>> On 04/29/2017 11:31 AM, address@hidden wrote:  
> >>>> Opensuse 42.2
> >>>> uname -a
> >>>> Linux linux-0u81 4.4.57-18.3-default #1 SMP Thu Mar 30 06:39:47
> >>>> UTC 2017 (39c8557) x86_64 x86_64 x86_64 GNU/Linux
> >>>> ---------------
> >>>> Building for version: 3.7.12git-101-g098dc3e0 / 3.7.12git
> >>>> Entire cmake output at:
> >>>> https://pastebin.com/Gqa32538
> >>>> ----------
> >>>> Errors in the doxygen build:
> >>>> https://pastebin.com/2KVp6v9X
> >>>> --------------------------------
> >>>>
> >>>> 95% tests passed, 11 tests failed out of 220
> >>>>
> >>>> Total Test time (real) = 3850.12 sec
> >>>>
> >>>> The following tests FAILED:
> >>>> 18 - qa_cpp_py_binding (Failed)
> >>>> 22 - qa_ctrlport_probes (Failed)
> >>>> 51 - qa_cpp_py_binding_set (Failed)
> >>>> 84 - qa_python_message_passing (Failed)
> >>>> 89 - qa_polar_encoder_systematic (Failed)
> >>>> 92 - qa_polar_encoder (Failed)
> >>>> 94 - qa_polar_decoder_sc (Failed)
> >>>> 95 - qa_polar_decoder_sc_list (Failed)
> >>>> 98 - qa_polar_decoder_sc_systematic (Failed)
> >>>> 218 - qa_zeromq_sub (Failed)
> >>>> 219 - qa_zeromq_pub (Failed)
> >>>> Errors while running CTest
> >>>> Makefile:72: recipe for target 'test' failed
> >>>> make: *** [test] Error 8
> >>>>
> >>>> For the complete make test:
> >>>> https://pastebin.com/JwHqDGrc
> >>>> ------------------------
> >>>>
> >>>> ctest -V -R ctrlport_probes
> >>>> UpdateCTestConfiguration
> >>>> from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
> >>>> UpdateCTestConfiguration
> >>>> from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
> >>>> Test project /usr/local/src/gnuradio_latest/gnuradio/build
> >>>> Constructing a list of tests
> >>>> Done constructing a list of tests
> >>>> Checking test dependency graph...
> >>>> Checking test dependency graph end
> >>>> test 22
> >>>> Start 22: qa_ctrlport_probes
> >>>>
> >>>> 22: Test command: /usr/bin/sh
> >>>> "/usr/local/src/gnuradio_latest/gnuradio/build/gr-blocks/python/blocks/qa_ctrlport_probes_test.sh"
> >>>> 22: Test timeout computed to be: 9.99988e+06
> >>>> 22: gr::log :INFO: controlport - Apache Thrift: -h linux-0u81 -p
> >>>> 42407 22: Could not connect to ControlPort endpoint at
> >>>> linux-0u81:42407. 22:
> >>>> 22: Exception socket.error: (32, 'Broken pipe') in <bound method
> >>>> ThriftRadioClient.__del__ of
> >>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
> >>>> at  
> >>>> 0x7f046ca06200>> ignored  
> >>>> 22: Could not connect to ControlPort endpoint at
> >>>> linux-0u81:42407. 22:
> >>>> 22: Exception socket.error: (32, 'Broken pipe') in <bound method
> >>>> ThriftRadioClient.__del__ of
> >>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
> >>>> at  
> >>>> 0x7f046ca117e8>> ignored  
> >>>> 22: Could not connect to ControlPort endpoint at
> >>>> linux-0u81:42407. 22:
> >>>> 22: Exception socket.error: (32, 'Broken pipe') in <bound method
> >>>> ThriftRadioClient.__del__ of
> >>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
> >>>> at  
> >>>> 0x7f046ca11b48>> ignored  
> >>>> 22: Could not connect to ControlPort endpoint at
> >>>> linux-0u81:42407. 22:
> >>>> 22: Exception socket.error: (32, 'Broken pipe') in <bound method
> >>>> ThriftRadioClient.__del__ of
> >>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
> >>>> at  
> >>>> 0x7f046ca11e60>> ignored  
> >>>> ^C^C
> >>>> ------------------------------------
> >>>> ctest -V -R cpp_py
> >>>> UpdateCTestConfiguration
> >>>> from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
> >>>> UpdateCTestConfiguration
> >>>> from :/usr/local/src/gnuradio_latest/gnuradio/build/DartConfiguration.tcl
> >>>> Test project /usr/local/src/gnuradio_latest/gnuradio/build
> >>>> Constructing a list of tests
> >>>> Done constructing a list of tests
> >>>> Checking test dependency graph...
> >>>> Checking test dependency graph end
> >>>> test 18
> >>>> Start 18: qa_cpp_py_binding
> >>>>
> >>>> 18: Test command: /usr/bin/sh
> >>>> "/usr/local/src/gnuradio_latest/gnuradio/build/gr-blocks/python/blocks/qa_cpp_py_binding_test.sh"
> >>>> 18: Test timeout computed to be: 9.99988e+06
> >>>> 18: gr::log :INFO: controlport - Apache Thrift: -h linux-0u81 -p
> >>>> 41848 18: Could not connect to ControlPort endpoint at
> >>>> linux-0u81:41848. 18:
> >>>> 18: Exception socket.error: (32, 'Broken pipe') in <bound method
> >>>> ThriftRadioClient.__del__ of
> >>>> <gnuradio.ctrlport.RPCConnectionThrift.ThriftRadioClient instance
> >>>> at 0x7f81c0071518>> ignored ^C^C
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Discuss-gnuradio mailing list
> >>>> address@hidden
> >>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >>>>  
> >>>
> >>> _______________________________________________
> >>> Discuss-gnuradio mailing list
> >>> address@hidden
> >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio  
> >>
> >> _______________________________________________
> >> Discuss-gnuradio mailing list
> >> address@hidden
> >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >>  
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >  
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio