Re: [Discuss-gnuradio] How to write data periodically in file sink

[Gilad Beeri (ApolloShield)]

If you need accuracy, I think the asynchronous nature of your method might problematic (will appreciate input from GR devs).

Maybe try a different approach - write the samples to a memory buffer, then read from the buffer the exact # of samples you want to write to a file.

On Fri, May 19, 2017 at 5:02 PM Deepak Gautam <address@hidden> wrote:

Dear luca,

I had already tried with controlling flow graph dynamically using start(), stop(), lock(), unlock() function. Here i have the part of code i had used.

tb=top_block_cls()

count=1

tb.start()

while (count<5):

    time.sleep(1.0)           #data is recorded in the file

    tb.lock()

    tb.disconnect((tb.uhd_usrp_source_0,0),(tb.blocks_file_sink_0, 0))   #disconnect source and block

    tb.blocks_file_sink_0= blocks.file_sink(gr.sizeof_gr_complex*1, filename,False)  # create new file sink to write

    tb.connect((tb.uhd_usrp_source_0,0),(tb.blocks_file_sink_0, 0))  #connect source with new file

    count=count+1

    time.sleep(2.0)           #wait 

    tb.unlock()

tb.stop()

This program should write the data for 1 second in the file, wait for 2 second and again write for 1 second to another file and so on for 5 4 times. I expect the total data written in the file to be same. But total number of samples recorded in the files are different. for my sampling rate of 25MSps, it should record 25MS per file, but it is around 22Mega sample with different number of data in different file.  So it is difficult to reproduce the accurate signal from received data . My application requires very good phase coherence. So i am wondering whether there is something to do to solve in this method or i have to think of another idea. 

Best Regards,

Deepak

On Mon, May 15, 2017 at 9:02 PM Moritz Luca Schmid <address@hidden> wrote:

Hey Deepak,

my first idea is to reconfigure the flowgraph. You could connect and disconnect your source for the time, you want to write data in your file sink and the time you don't want to.

You can find infos about the flowgraphs operations here.

Best

Luca

On 15.05.2017 13:53, Deepak Gautam wrote:

Currently i am working in the USRP using GNU Radio for my masters work. In my transmitter side, i send data continuously from file source followed by UHD Sink at the rate of 25 MSPS. In receiver side, I want to write the data in every two/three seconds after receiving from receiver USRP. Meaning, write data for 1 sec (25M samples), then dont write for next 2 second and again write for 1 sec and so on. Is there any suggestion for this purpose. I look forward for the resposne

Best Regards,

Deepak

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio