Re: [Discuss-gnuradio] Building gnuradio master fails

[Cinaed Simson]

On 05/21/2017 08:02 PM, address@hidden wrote:
> It seems opensuse runs an old rev of gsl. Here are the relevant file
> names and revs:
> 
> gsl 1.16-74
> gsl-devel 2.3-9.1
> libgsl19 2.3-9.1
> libgslblas0 2.3-9.1
> python-pygsl 0.9.5-2.30
> python-pygsl-devel 0.9.5-2.30

I'm running release version 3.7.11 with gsl-1.16.

Actually, now that I think about it, I would be suprised if it built
gr-fec without gsl.

It may not a be gsl problem - your mileage may vary depending upon the
version of gnuradio you're running.

Create a new build directory and run cmake - it will tell you if there's
a problem with gsl.

-- Cinaed

> 
> Using the science repo, I can upgrade gsl to rev 2.3. Yast will have to
> deinstall a number of programs such as krita and more significant,
> inkscape. I can build what breaks from source if the rev of gsl is the
> problem.
> 
> 
> On Sun, 21 May 2017 18:08:36 -0700
> address@hidden wrote:
> 
>>
>> "Latest commit 0e32fca 4 days ago." That comes right off of github.
>> https://github.com/gnuradio/gnuradio
>>
>> When I'm on that machine, I will research what I have for the gnu
>> scientific library. I have it, but don't know if it is up to date.
>>
>>
>>   Original Message  
>> From: Cinaed Simson
>> Sent: Sunday, May 21, 2017 5:52 PM
>> To: address@hidden
>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
>>
>> On 05/21/2017 01:27 AM, address@hidden wrote:
>>> FWIW, I just compiled 0e32fca on opensuse. It builds just fine, but
>>> I'm failing all the polar tests. Yeah I have scipy installed. I'll
>>> start a new thread on that when I've totally given up debugging. But
>>> the code on that rev is buildable on my PC.
>>
>> I have no idea what 0e32fca is - looks like an arbitrary hex tag - but
>> if the tests in gr-fec are failing it's most likely because
>> development version of gsl wasn't installed - or it's the wrong
>> version.
>>
>> Can you simply install gsl and be on your merry way? Unlikely.
>>
>> -- Cinaed
>>
>>
>>>
>>>
>>> On Sun, 21 May 2017 08:13:28 +0200
>>> "Ralph A. Schmid, dk5ras" <address@hidden> wrote:
>>>
>>>> This is also my experience, I made exactly this, deleting the build
>>>> dir, make a new one, fresh cmake, and so on.
>>>>
>>>> Ralph.
>>>>
>>>>
>>>>> -----Original Message-----
>>>>> From: address@hidden [mailto:address@hidden
>>>>> Sent: Saturday, 20 May, 2017 20:50
>>>>> To: Ralph A. Schmid, dk5ras; 'Kostis Triantafyllakis';
>>>>> address@hidden Subject: Re: [Discuss-gnuradio] Building
>>>>> gnuradio master fails
>>>>>
>>>>> Be that as it may, I have noticed that the first "cmake../", that
>>>>> is a fresh directory, produces different output than a "make
>>>>> clean" followed by "cmake ../". ‎ I've made it a point to do a
>>>>> "rm -r build".
>>>>>
>>>>> By output, I means whatever is written to standard output. I don't
>>>>> know if a fresh directly effects the actual build or not.
>>>>>
>>>>> Original Message
>>>>> From: Ralph A. Schmid, dk5ras
>>>>> Sent: Saturday, May 20, 2017 11:32 AM
>>>>> To: 'Kostis Triantafyllakis'; address@hidden
>>>>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
>>>>>
>>>>> Hi,
>>>>>
>>>>> Forgot to mention that of course I already did so - with no
>>>>> success...
>>>>>
>>>>> Ralph.
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Kostis Triantafyllakis [mailto:address@hidden
>>>>>> Sent: Saturday, 20 May, 2017 18:19
>>>>>> To: Ralph A. Schmid, dk5ras; address@hidden
>>>>>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
>>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> Cleaning (or even deleting the whole build directory) before
>>>>>> rebuilding, had helped me in similar cases.
>>>>>> Maybe you could give it a try
>>>>>>
>>>>>> Best,
>>>>>> Kostis
>>>>>>
>>>>>>
>>>>>> On 05/20/2017 06:58 PM, Ralph A. Schmid, dk5ras wrote: 
>>>>>>> Hi,
>>>>>>>
>>>>>>> on a Kubuntu 16.04 system building gnuradio from source fails.
>>>>>>> Branch is master, downloaded right now.
>>>>>>>
>>>>>>> UHD is also the latest version from right now.
>>>>>>>
>>>>>>> Any ideas what it could be? Here the output:
>>>>>>>
>>>>>>>
>>>>>>> [ 99%] Built target _trellis_swig1
>>>>>>> [ 99%] Building CXX object
>>>>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
>>>>>>>
>>>>>>> [ 99%] Built target _trellis_swig0
>>>>>>> [ 99%] Built target pygen_gr_uhd_swig_08777
>>>>>>> [ 99%] Built target pygen_gr_video_sdl_swig_ce2c9
>>>>>>> [ 99%] Built target pygen_gr_vocoder_swig_43253
>>>>>>> [ 99%] Built target _video_sdl_swig
>>>>>>> [ 99%] Built target _vocoder_swig
>>>>>>> [ 99%] Built target pygen_gr_fcd_swig_c4332
>>>>>>> [ 99%] Built target _fcd_swig
>>>>>>> [ 99%] Built target pygen_gr_wavelet_swig_89b19
>>>>>>> [ 99%] Built target _wavelet_swig
>>>>>>> [ 99%] Built target pygen_gr_wxgui_swig_78659
>>>>>>> [100%] Built target _wxgui_swig
>>>>>>> [100%] Built target pygen_gr_zeromq_swig_4d7be
>>>>>>> [100%] Built target _zeromq_swig
>>>>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
>>>>>>> In 
>>>>>> function 
>>>>>>> ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*,
>>>>>>> PyObject*, PyObject*)’:
>>>>>>> /home/ras/gnuradio/build/gr- 
>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15:
>>>>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named 
>>>>> ‘set_gpio_debug’ 
>>>>>>> (arg1)->set_gpio_debug(arg2,arg3);
>>>>>>> ^
>>>>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
>>>>>>> In 
>>>>>> function 
>>>>>>> ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*,
>>>>> PyObject*, 
>>>>>>> PyObject*)’:
>>>>>>> /home/ras/gnuradio/build/gr- 
>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16:
>>>>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named 
>>>>> ‘set_gpio_debug’ 
>>>>>>> (*arg1)->set_gpio_debug(arg2,arg3);
>>>>>>> ^
>>>>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
>>>>>>> In 
>>>>>> function 
>>>>>>> ‘void init_uhd_swig()’:
>>>>>>> /home/ras/gnuradio/build/gr- 
>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91:
>>>>>>> error: ‘ATR_REG_IDLE’ is not a member of
>>>>>>> ‘uhd::usrp::dboard_iface’ ant(d,
>>>>>>> "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int 
>>>>>>>> (uhd::usrp:: 
>>>>>>> ^
>>>>>>> /home/ras/gnuradio/build/gr- 
>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94:
>>>>>>> error: ‘ATR_REG_TX_ONLY’ is not a member of
>>>>>>> ‘uhd::usrp::dboard_iface’ (d,
>>>>>>> "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int 
>>>>>>>> (uhd::usrp:: 
>>>>>>> ^
>>>>>>> /home/ras/gnuradio/build/gr- 
>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94:
>>>>>>> error: ‘ATR_REG_RX_ONLY’ is not a member of
>>>>>>> ‘uhd::usrp::dboard_iface’ (d,
>>>>>>> "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int 
>>>>>>>> (uhd::usrp:: 
>>>>>>> ^
>>>>>>> /home/ras/gnuradio/build/gr- 
>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98:
>>>>>>> error: ‘ATR_REG_FULL_DUPLEX’ is not a member of 
>>>>> ‘uhd::usrp::dboard_iface’ 
>>>>>>> "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast<
>>>>>>> int 
>>>>>>>> (uhd::usrp:: 
>>>>>>> ^
>>>>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for
>>>>>>> target
>>>>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o'
>>>>> failed 
>>>>>>> make[2]: ***
>>>>>>> [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o]
>>>>> Error 
>>>>>> 1 
>>>>>>> CMakeFiles/Makefile2:15016: recipe for target
>>>>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
>>>>>>> make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
>>>>>>> Makefile:160: recipe for target 'all' failed
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> Ralph A. Schmid
>>>>>>> Mondstr. 10
>>>>>>> 90762 Fürth
>>>>>>> +49-171-3631223
>>>>>>> address@hidden
>>>>>>> http://www.bclog.de/
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Discuss-gnuradio mailing list
>>>>>>> address@hidden
>>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Discuss-gnuradio mailing list
>>>>> address@hidden
>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio 
>>>>
>>>
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> address@hidden
>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
>