[Discuss-gnuradio] Error on GNUradio

[Ricardo Nuszkowski]

Hello,

We will be running a basic flow graph to test our antenna with the LimeSDR.

The flowgraph is basically an osmocom source--> WX GUI waterfall sink.

It will run perfectly fine for some operations and then every once in a while we will run it and get this error. It then works fine after we hit the reset button on the LimeSDR.

We will get this error.

Generating: '/home/ground/Documents/top_block.py'

Executing: /usr/bin/python2 -u /home/ground/Documents/top_block.py

gr-osmosdr v0.1.4-98-gc653754d (0.1.5git) gnuradio 3.7.11.1
built-in source types: file osmosdr fcd rtl rtl_tcp rfspace soapy redpitaya
[INFO] Make connection: 'LimeSDR-USB [USB 2.0] 9070602491E35'
[1m [33m[WARNING] Gateware version mismatch!
  Expected gateware version 2, revision 11
  But found version 0, revision 0
  Follow the FW and FPGA upgrade instructions:
  http://wiki.myriadrf.org/Lime_Suite#Flashing_images
  Or run update on the command line: LimeUtil --update
[0m
[INFO] Device name: LimeSDR-USB
[INFO] Reference: 30.72 MHz
[INFO] Init LMS7002M(0)
[INFO] Ver=0, Rev=0, Mask=0

FATAL: ResetChip() failed

Trying to fill up 1 missing channel(s) with null source(s).
This is being done to prevent the application from crashing
due to gnuradio bug #528.


(top_block.py:4176): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 20

(top_block.py:4176): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 20

(top_block.py:4176): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 20

(top_block.py:4176): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 20

>>> Done (return code -9)

Ocassionally, we also get this error as well:

Generating: '/home/ground/Documents/top_block.py'

Executing: /usr/bin/python2 -u /home/ground/Documents/top_block.py

gr-osmosdr v0.1.4-98-gc653754d (0.1.5git) gnuradio 3.7.11.1
built-in source types: file osmosdr fcd rtl rtl_tcp rfspace soapy redpitaya
[INFO] Make connection: 'LimeSDR-USB [USB 2.0] 9070602491E35'
[INFO] Reference clock 30.720 MHz
[INFO] Device name: LimeSDR-USB
[INFO] Reference: 30.72 MHz
[INFO] Init LMS7002M(0)
[INFO] Ver=7, Rev=1, Mask=1
[INFO] LMS7002M calibration values caching Disable
[1m [31m[ERROR] [0m
[1m [33m[WARNING] SoapyLMS7::setSampleRate(): not a power of two factor: TSP Rate = 15.36 MHZ, Requested rate = 10 MHz [0m
[1m [31m[ERROR] [0m
[1m [31m[ERROR] [0m
[1m [31m[ERROR] setBandwidth(Rx, 1, 30 MHz) Failed - [0m

FATAL:

Trying to fill up 1 missing channel(s) with null source(s).
This is being done to prevent the application from crashing
due to gnuradio bug #528.

If anyone knows what is going on, that would be great.

Ricardo