|
On 11/14/2017 07:39 PM, Ricardo
Nuszkowski wrote:
I’ll ask this in the other forum, but this is a
seperate question outside the reset chip issue.
I wanted to know if there was any
recommendations on the setup and if their would be an issue
running on the same SDR.
Ricardo
Well, this is pretty generic to radios in general.
If your RX is tuned to the same frequency as your TX, you'll receive
your own transmissions. Further, due to the proximity of your TX
and RX antennae
(assuming you're running full-duplex), your RX is likely to be
de-sensed, even if it's tuned to a different frequency.
Maybe you
should ask this on the LimeSDR mailing list.
Incidentally, is what you're trying to do here related to
the problem
posted in "Error on GNURadio"
FATAL: ResetChip() failed
-- Cinaed
On 11/14/2017 10:48 AM, Ricardo Nuszkowski wrote:
> Hello,
>
> We are about to receive our second antenna and want to
test our GMSK modulation flow graph on gnuradio. We are just
sending a text file so our TX flow graph looks like: file
source—>packet encoder—> GMSK mod—>multiple
constant—>osmocom sink. (I saw to add a multiply constant
to not interfere with the RX).
>
> Our RX looks like: osmocom source—>GMSK
demod—>packet decoder—>file sink.
>
> We would have both antennas connected to the LimeSDR.
Would we be able to perform testing of the system using the
same SDR or would they interfere because on the same
frequency.
>
> If you have any recommendations, please let me know.
>
>
> Respectfully,
>
> Ricardo
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
|