|
From: | Michael Terry |
Subject: | Re: [Duplicity-talk] Problems with "librsync error 103 while in patch cycle" |
Date: | Fri, 15 Nov 2013 22:53:44 -0500 |
good to hear.. looking forward to your findings! ..ede
On 11.11.2013 16:43, Michael Terry wrote:
> I looked at this a bit last night. For your later issue of hitting a KeyError: 4 exception, I have a fix: lp:~mterry/duplicity/manifest-oddities (not proposed for merging yet, since there is more research needed, see below)
>
> I'm currently also investigating a similar problem that can occur, though you didn't happen to run into it. For your original issue of having patch_seq[-1] == None, I'm not sure how that can happen yet. Still (slowly) looking into it.
>
> -mt
>
>
>
> On 4 November 2013 15:57, <address@hidden <mailto:address@hidden>> wrote:> ..ede/duply.net <http://duply.net>
>
> thanks :) .. at least we pointed him in the right direction. _and_ now we've got some pointers in writing on how to fix that for when we come around to tackle it.
>
> thanks Echo as well for keeping us posted!
>
>
>
> On 04.11.2013 21:52, Michael Terry wrote:
> > Heyo! I'm just dropping a line to say I've seen this email and it looks like I need to do some further work on that area of code in terms of letting the user continue. But I've been very busy lately and haven't gotten to it.
> >
> > So I acknowledge the problem, but haven't had time to work on it. :-/
> >
> > -mt
> >
> >
> > On 3 November 2013 21:21, Echo Nolan <address@hidden <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>>> wrote:
> >
> > Hi again. I managed to get most of my data restored :) I'm not sure what the NoneType error means exactly, but the below patch allows restore to continue.
> >
> > === modified file 'duplicity/patchdir.py'
> > --- duplicity/patchdir.py 2013-09-19 00:26:01 +0000
> > +++ duplicity/patchdir.py 2013-11-03 22:20:35 +0000
> > @@ -23,6 +23,7 @@
> > import types
> > import os
> > import tempfile
> > +import pprint
> >
> > from duplicity import tarfile address@hidden
> > from duplicity import librsync address@hidden
> > @@ -504,11 +505,16 @@
> > # otherwise final patch was delete
> > yield final_ropath
> > except Exception, e:
> > - filename = patch_seq[-1].get_ropath().get_relative_path()
> > - log.Warn(_("Error '%s' patching %s") %
> > - (str(e), filename),
> > - log.WarningCode.cannot_process,
> > - util.escape(filename))
> > + if patch_seq[-1] != None:
> > + filename = patch_seq[-1].get_ropath().get_relative_path()
> > + log.Warn(_("Error '%s' patching %s") %
> > + (str(e), filename),
> > + log.WarningCode.cannot_process,
> > + util.escape(filename))
> > + else:
> > + log.Warn(_("Error '%s' patching unknown file") %
> > + (str(e)),
> > + log.WarningCode.cannot_process)
> >
> > def tarfiles2rop_iter( tarfile_list, restrict_index=() ):
> > """Integrate tarfiles of diffs into single ROPath iter
> >
> > That got me a new error, further into the restore process. I was getting a KeyError exception:
> >
> >
> > Traceback (most recent call last):
> > File "bin/duplicity", line 1469, in <module>
> > with_tempdir(main)
> > File "bin/duplicity", line 1462, in with_tempdir
> > fn()
> > File "bin/duplicity", line 1396, in main
> >
> > restore(col_stats)
> > File "bin/duplicity", line 687, in restore
> > restore_get_patched_rop_iter(col_stats)):
> > File "/home/enolan/duplicity/duplicity/patchdir.py", line 541, in Write_ROPaths
> > for ropath in rop_iter:
> > File "/home/enolan/duplicity/duplicity/patchdir.py", line 501, in integrate_patch_iters
> > for patch_seq in collated:
> > File "/home/enolan/duplicity/duplicity/patchdir.py", line 381, in yield_tuples
> > setrorps( overflow, elems )
> > File "/home/enolan/duplicity/duplicity/patchdir.py", line 370, in setrorps
> > elems[i] = iter_list[i].next()
> > File "/home/enolan/duplicity/duplicity/patchdir.py", line 140, in difftar2path_iter
> > tarinfo_list[0] = tar_iter.next()
> > File "/home/enolan/duplicity/duplicity/patchdir.py", line 336, in next
> > self.set_tarfile()
> > File "/home/enolan/duplicity/duplicity/patchdir.py", line 325, in set_tarfile
> > self.current_fp = self.fileobj_iter.next()
> > File "bin/duplicity", line 726, in get_fileobj_iter
> > backup_set.volume_name_dict[vol_num],
> > KeyError: 4
> >
> > To figure out what was going on, I added some debug print lines:
> >
> > === modified file 'bin/duplicity'
> > --- bin/duplicity 2013-09-20 01:32:31 +0000
> > +++ bin/duplicity 2013-11-04 02:05:07 +0000
> > @@ -29,7 +29,7 @@
> >
> > import getpass, gzip, os, sys, time, types
> > import traceback, platform, statvfs, resource, re
> > -import threading
> > +import threading, pprint
> > from datetime import datetime
> >
> > pwd = os.path.abspath(os.path.dirname(sys.argv[0]))
> > @@ -719,6 +719,9 @@
> > manifest = backup_set.get_manifest()
> > volumes = manifest.get_containing_volumes(index)
> > for vol_num in volumes:
> > + print "vol_num: " + str(vol_num)
> > + print "volume_name_dict"
> > + pprint.pprint(backup_set.volume_name_dict)
> > yield restore_get_enc_fileobj(backup_set.backend,
> > backup_set.volume_name_dict[vol_num],
> > manifest.volume_info_dict[vol_num])
> >
> > Results showed it was looking for a fourth volume in duplicity-inc.20121218T113324Z.to.20130121T051302Z. I decrypted the manifest:
> >
> > Hostname localhost6.localdomain6
> > Localdir /home/enolan
> > Volume 1:
> > StartingPath .
> > EndingPath ".config/google-chrome/Default/Top\x20Sites" 3
> > Hash SHA1 40f6ddd332d82b5197db4bdbf13278b9abfb6e71
> > Volume 2:
> > StartingPath ".config/google-chrome/Default/Top\x20Sites" 4
> > EndingPath .dropbox-dist/library.zip 112
> > Hash SHA1 3ec708b2a6b48e6efa9662dcdb751dcad6c153cf
> > Volume 3:
> > StartingPath .dropbox-dist/library.zip 113
> > EndingPath .local/share/Steam/SteamApps/common/Uplink/lib/libmikmod.so.2 8
> > Hash SHA1 76e5a803315ff9bca2a6de9c7d2a04d81ab77e0f
> > Volume 4:
> > StartingPath .local/share/Steam/SteamApps/common/Uplink/lib/libmikmod.so.2 9
> > EndingPath ".local/share/Steam/SteamApps/common/World\x20of\x20Goo/WorldOfGoo" 49
> > Hash SHA1 f7ea5f82fa34ce159095b46555b3877cd16d5b5a
> > Volume 3:
> > StartingPath .local/share/Steam/ClientRegistry.blob
> > EndingPath "mystuff/writing/misc/resume\x20non\x20tech.pdf"
> > Hash SHA1 10eaa0b647bd998c34d7f5775894152a16e45dd1
> >
> > There are only three volumes in that incremental backup in reality. I deleted the first volume 3 and 4 entries, and made sure that the SHA1 of volume 3 matched the real hash of the volume. After that, restore finished properly, though still with many errors.
> >
> > Hope this helps somebody. :)
> >
> >
> >
> > On Sun, Nov 3, 2013 at 1:37 PM, <address@hidden <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>>> wrote:> > ..ede/duply.net <http://duply.net> <http://duply.net>
> >
> > you should definitely rethink your backup strategy for the next time, but i guess you've already came to that conclusion ;)
> >
> > wrt. the problem. as i wrote to Mike. try catching the error where it is thrown. the restore should continue then with the next file instead of breaking completely.
> >
> >
> >
> >
> >
> > On 03.11.2013 20:02, Echo Nolan wrote:
> > > Edgar et al,
> > >
> > > Unfortunately, it looks like the initial full backup is corrupt. The restore reaches "Processed volume 13 of 75" before dying, and the initial backup is 25 volumes. I was able to get two important files out with --file-to-restore, I guess they didn't get created until after the first backup? Is there something else I can do to get a partial restore?
> > >
> > >
> > > > It seemed like the same problem, and oh look, someone has already committed a patch allowing me to continue restoring a backup containing broken files (https://code.launchpad.net/~mterry/duplicity/catch-seq-copy-error/+merge/186106 <https://code.launchpad.net/%7Emterry/duplicity/catch-seq-copy-error/+merge/186106> <https://code.launchpad.net/%7Emterry/duplicity/catch-seq-copy-error/+merge/186106> <https://code.launchpad.net/%7Emterry/duplicity/catch-seq-copy-error/+merge/186106> <https://code.launchpad.net/%7Emterry/duplicity/catch-seq-copy-error/+merge/186106>). So I grabbed duplicity from bzr (bzr branch lp:duplicity) and built it. Trying with that version gives a different error however:> > > On Sun, Nov 3, 2013 at 3:30 AM, <address@hidden <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>> <mailto:address@hidden <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>>>> wrote:
> > >
> > > On 03.11.2013 07:08, Echo Nolan wrote:
> > > > Hi All.
> > > >
> > > > I'm trying to restore a backup. Here's what happens with the version of duplicity shipping with Ubuntu 13.10 (0.6.21):
> > > >
> > > > address@hidden:~$ rm -r restore && duplicity file://enolan-desktop-backup restore/
> > > > Local and Remote metadata are synchronized, no sync needed.
> > > > Last full backup date: Sun Jan 15 08:05:07 2012
> > > > GnuPG passphrase:
> > > > python: ERROR: (rs_tube_catchup) reached end of file while copying literal data through buffers
> > > > python: ERROR: (rs_job_complete) patch job failed: unexpected end of input
> > > > Traceback (most recent call last):
> > > > File "/usr/bin/duplicity", line 1411, in <module>
> > > > with_tempdir(main)
> > > > File "/usr/bin/duplicity", line 1404, in with_tempdir
> > > > fn()
> > > > File "/usr/bin/duplicity", line 1338, in main
> > > > restore(col_stats)
> > > > File "/usr/bin/duplicity", line 632, in restore
> > > > restore_get_patched_rop_iter(col_stats)):
> > > > File "/usr/lib/python2.7/dist-packages/duplicity/patchdir.py", line 526, in Write_ROPaths
> > > > for ropath in rop_iter:
> > > > File "/usr/lib/python2.7/dist-packages/duplicity/patchdir.py", line 499, in integrate_patch_iters
> > > > final_ropath = patch_seq2ropath( normalize_ps( patch_seq ) )
> > > > File "/usr/lib/python2.7/dist-packages/duplicity/patchdir.py", line 479, in patch_seq2ropath
> > > > misc.copyfileobj( current_file, tempfp )
> > > > File "/usr/lib/python2.7/dist-packages/duplicity/misc.py", line 166, in copyfileobj
> > > > buf = infp.read(blocksize)
> > > > File "/usr/lib/python2.7/dist-packages/duplicity/librsync.py", line 80, in read
> > > > self._add_to_outbuf_once()
> > > > File "/usr/lib/python2.7/dist-packages/duplicity/librsync.py", line 94, in _add_to_outbuf_once
> > > > raise librsyncError(str(e))
> > > > librsyncError: librsync error 103 while in patch cycle
> > > >
> > > > I googled, and found this ticket in Ubuntu's bugtracker: https://bugs.launchpad.net/duplicity/+bug/662442
> > > >
> > > ..ede/duply.net <http://duply.net> <http://duply.net> <http://duply.net>> > > >
> > > > address@hidden:~/duplicity$ bin/duplicity file://../enolan-desktop-backup ../restore
> > > > Import of duplicity.backends.dpbxbackend Failed: No module named dropbox
> > > > Local and Remote metadata are synchronized, no sync needed.
> > > > Last full backup date: Sun Jan 15 08:05:07 2012
> > > > GnuPG passphrase:
> > > > python: ERROR: (rs_tube_catchup) reached end of file while copying literal data through buffers
> > > > python: ERROR: (rs_job_complete) patch job failed: unexpected end of input
> > > > Traceback (most recent call last):
> > > > File "bin/duplicity", line 1466, in <module>
> > > > with_tempdir(main)
> > > > File "bin/duplicity", line 1459, in with_tempdir
> > > > fn()
> > > > File "bin/duplicity", line 1393, in main
> > > > restore(col_stats)
> > > > File "bin/duplicity", line 687, in restore
> > > > restore_get_patched_rop_iter(col_stats)):
> > > > File "/home/enolan/duplicity/duplicity/patchdir.py", line 535, in Write_ROPaths
> > > > for ropath in rop_iter:
> > > > File "/home/enolan/duplicity/duplicity/patchdir.py", line 507, in integrate_patch_iters
> > > > filename = patch_seq[-1].get_ropath().get_relative_path()
> > > > AttributeError: 'NoneType' object has no attribute 'get_ropath'
> > > >
> > > > Can any of you help me out? This is my only copy of several important files..
> > > >
> > >
> > > Echo,
> > >
> > > currently rsync errors or others restore errors break restoring. the usual workaround is, assuming you have a full/incr backup chain, to restore a time before the broken volumes.
> > >
> > > 1. try listing your backup chains and save the output.
> > > 2. then run your restore as before but with '-v9' maximum verbosity. check which volume breaks the restore. it should be mentioned right above the error stack. interpret it's time value in the file name.
> > > 3. now try restoring giving a time before the time value you retrieved in step 2.
> > >
> > > Mike: you tackled this before. could you catch his error higher up? we probably need to log a warning that this file will not be restored too.
> > >
> > >
> > >
> > > _______________________________________________
> > > Duplicity-talk mailing list
> > > address@hidden <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>> <mailto:address@hidden <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>>>
> > > https://lists.nongnu.org/mailman/listinfo/duplicity-talk
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Duplicity-talk mailing list
> > > address@hidden <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>>
> > > https://lists.nongnu.org/mailman/listinfo/duplicity-talk
> > >
> >
> > _______________________________________________
> > Duplicity-talk mailing list
> > address@hidden <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>>
> > https://lists.nongnu.org/mailman/listinfo/duplicity-talk
> >
> >
> >
> > _______________________________________________
> > Duplicity-talk mailing list
> > address@hidden <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>>
> > https://lists.nongnu.org/mailman/listinfo/duplicity-talk
> >
> >
> >
> >
> > _______________________________________________
> > Duplicity-talk mailing list
> > address@hidden <mailto:address@hidden>
> > https://lists.nongnu.org/mailman/listinfo/duplicity-talk
> >
>
> _______________________________________________
> Duplicity-talk mailing list
> address@hidden <mailto:address@hidden>
> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>
>
>
>
> _______________________________________________
> Duplicity-talk mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/duplicity-talk
>
_______________________________________________
Duplicity-talk mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/duplicity-talk
[Prev in Thread] | Current Thread | [Next in Thread] |