--- Begin Message ---
|
Subject: |
3 test failures on fedora 16 |
|
Date: |
Mon, 26 Dec 2011 23:07:55 +0100 |
Hello,
I was surprised to see test failures on Fedora 16.
At least the color2 failure seems to be due to a difference
in how expect works.
+ expect -f expect-make
+ cat stdout
+ spawn make -e check
Here, its "expect -f expect-make" invocation
produces only one line of output, while on Debian unstable it
produces the expected colorized make output.
The versions of expect are the same.
Here's the full log.
==============================================
GNU Automake 1.11a: tests/test-suite.log
==============================================
3 of 1112 tests failed. (38 tests were not run).
.. contents:: :depth: 2
SKIP: get-sysconf.test (exit: 77)
=================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/get-sysconf.dir
+ set -e
+ top_testsrcdir=/h/j/w/co/automake/tests/..
++ cd ..
++ pwd
+ testbuilddir=/h/j/w/co/automake/tests
++ cd /h/j/w/co/automake/tests/..
++ pwd
+ top_testbuilddir=/h/j/w/co/automake
+ st=0
+ sed 20q /h/j/w/co/automake/tests/../ChangeLog
2011-12-24 Stefano Lattarini <address@hidden>
gitignore: use only one .gitignore file, in the top-level directory
* doc/.gitignore, doc/amhello/.gitignore, lib/Automake/.gitignore,
lib/Automake/tests/.gitignore, tests/.gitignore: Deleted, their
contents merged into ...
* .gitignore: ... this top-level file. Since we are at it, improve
it by anchoring files where it makes sense.
2011-12-24 Stefano Lattarini <address@hidden>
tests: one more fixlet for gettext macros requirement
* tests/gettext-macros.test (configure.in): Add calls to
AC_INIT and AC_PROG_CC, to avoid a spurious failure in the
later aclocal invocation.
Luckily, this wart wasn't causing any spurious SKIP or FAIL,
but only the redundant addition to the `-Wno-syntax' option
to some aclocal invocations in the gettext tests.
2011-12-24 Stefano Lattarini <address@hidden>
+ /usr/bin/perl -V
Summary of my perl5 (revision 5 version 14 subversion 2) configuration:
Platform:
osname=linux, osvers=2.6.32-220.el6.x86_64,
archname=x86_64-linux-thread-multi
uname='linux x86-15.phx2.fedoraproject.org 2.6.32-220.el6.x86_64 #1 smp wed
nov 9 08:03:13 est 2011 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2
-fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic
-Dccdlflags=-Wl,--enable-new-dtags -DDEBUGGING=-g -Dversion=5.14.2
-Dmyhostname=localhost address@hidden -Dcc=gcc -Dcf_by=Red Hat, Inc.
-Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr/local
-Dsitelib=/usr/local/share/perl5 -Dsitearch=/usr/local/lib64/perl5
-Dprivlib=/usr/share/perl5 -Dvendorlib=/usr/share/perl5/vendor_perl
-Darchlib=/usr/lib64/perl5 -Dvendorarch=/usr/lib64/perl5/vendor_perl
-Darchname=x86_64-linux-thread-multi -Dlibpth=/usr/local/lib64 /lib64
/usr/lib64 -Duseshrplib -Dusethreads -Duseithreads -Dusedtrace=/usr/bin/dtrace
-Duselargefiles -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog
-Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly
-Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto
-Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto
-Ud_endservent_r_proto -Ud_setservent_r_proto -Dscriptdir=/usr/bin'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.6.2 20111027 (Red Hat 4.6.2-1)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -fstack-protector'
libpth=/usr/local/lib64 /lib64 /usr/lib64
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
-lgdbm_compat
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.14.90'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef,
ccdlflags='-Wl,--enable-new-dtags -Wl,-rpath,/usr/lib64/perl5/CORE'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
--param=ssp-buffer-size=4 -m64 -mtune=generic'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under linux
Compiled at Dec 21 2011 13:00:29
@INC:
/usr/local/lib64/perl5
/usr/local/share/perl5
/usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl
/usr/lib64/perl5
/usr/share/perl5
.
+ cat /h/j/w/co/automake/config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by GNU Automake configure 1.11a, which was
generated by GNU Autoconf 2.68.101-b8546. Invocation command line was
$ ./configure --prefix=/p
## --------- ##
## Platform. ##
## --------- ##
hostname = hx.meyering.net
uname -m = x86_64
uname -r = 3.1.5-6.fc16.x86_64
uname -s = Linux
uname -v = #1 SMP Thu Dec 15 16:14:44 UTC 2011
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /opt/cov-sa-linux64-5.4.0/bin
PATH: /usr/lib64/ccache
PATH: /h/j/bin/perl
PATH: /h/j/bin
PATH: /p/p/git/bin
PATH: /p/bin
PATH: /sbin
PATH: /usr/sbin
PATH: /bin
PATH: /usr/bin
PATH: /usr/local
PATH: /usr/local/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1749: checking build system type
configure:1763: result: x86_64-unknown-linux-gnu
configure:1815: checking for a BSD-compatible install
configure:1883: result: /p/bin/install -c
configure:1894: checking whether build environment is sane
configure:1949: result: yes
configure:2100: checking for a thread-safe mkdir -p
configure:2139: result: /p/bin/mkdir -p
configure:2152: checking for gawk
configure:2168: found /bin/gawk
configure:2179: result: gawk
configure:2190: checking whether make sets $(MAKE)
configure:2212: result: yes
configure:2326: checking for perl
configure:2344: found /usr/bin/perl
configure:2356: result: /usr/bin/perl
configure:2368: /usr/bin/perl --version
This is perl 5, version 14, subversion 2 (v5.14.2) built for
x86_64-linux-thread-multi
Copyright 1987-2011, Larry Wall
Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using "man perl" or "perldoc perl". If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.
configure:2371: $? = 0
configure:2381: checking whether /usr/bin/perl supports ithreads
configure:2404: result: yes
configure:2416: checking for tex
configure:2432: found /usr/bin/tex
configure:2443: result: tex
configure:2454: tex --version </dev/null
TeX 3.141592 (Web2C 7.5.6)
kpathsea version 3.5.6
Copyright 2007 D.E. Knuth.
Kpathsea is copyright 2007 Karl Berry and Olaf Weber.
There is NO warranty. Redistribution of this software is
covered by the terms of both the TeX copyright and
the Lesser GNU General Public License.
For more information about these matters, see the file
named COPYING and the TeX source.
Primary author of TeX: D.E. Knuth.
Kpathsea written by Karl Berry, Olaf Weber, and others.
configure:2457: $? = 0
configure:2472: checking whether autoconf is installed
configure:2477: autoconf --version
autoconf (GNU Autoconf) 2.68.101-b8546
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+/Autoconf: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>, <http://gnu.org/licenses/exceptions.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by David J. MacKenzie and Akim Demaille.
configure:2480: $? = 0
configure:2488: result: yes
configure:2495: checking whether autoconf works
configure:2502: cd conftest && autoconf -o /dev/null conftest.ac
configure:2505: $? = 0
configure:2514: result: yes
configure:2521: checking whether autoconf is recent enough
configure:2528: cd conftest && autoconf -o /dev/null conftest.ac
configure:2531: $? = 0
configure:2540: result: yes
configure:2547: checking whether ln works
configure:2567: result: yes
configure:2582: checking for grep that handles long lines and -e
configure:2640: result: /p/bin/grep
configure:2645: checking for egrep
configure:2707: result: /p/bin/grep -E
configure:2712: checking for fgrep
configure:2774: result: /p/bin/grep -F
configure:2780: checking whether /bin/sh has working 'set -e' with exit trap
configure:2793: result: yes
configure:2960: checking that generated files are newer than configure
configure:2966: result: done
configure:2974: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by GNU Automake config.status 1.11a, which was
generated by GNU Autoconf 2.68.101-b8546. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on hx.meyering.net
config.status:796: creating Makefile
config.status:796: creating doc/Makefile
config.status:796: creating lib/Automake/Makefile
config.status:796: creating lib/Automake/tests/Makefile
config.status:796: creating lib/Makefile
config.status:796: creating lib/am/Makefile
config.status:796: creating m4/Makefile
config.status:796: creating tests/Makefile
config.status:796: creating tests/defs-static
config.status:796: creating tests/aclocal-1.11a
config.status:796: creating tests/automake-1.11a
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_EGREP='/p/bin/grep -E'
ac_cv_path_FGREP='/p/bin/grep -F'
ac_cv_path_GREP=/p/bin/grep
ac_cv_path_PERL=/usr/bin/perl
ac_cv_path_install='/p/bin/install -c'
ac_cv_path_mkdir=/p/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_TEX=tex
ac_cv_prog_make_make_set=yes
am_cv_autoconf_installed=yes
am_cv_autoconf_version=yes
am_cv_autoconf_works=yes
am_cv_prog_PERL_ithreads=yes
am_cv_prog_ln=ln
am_cv_sh_errexit_works=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='perllibdir="/h/j/w/co/automake/lib:./lib" "/h/j/w/co/automake/aclocal"
--acdir=m4 -I m4'
AMTAR='${SHELL} /h/j/w/co/automake/lib/missing --run tar'
AM_BACKSLASH='\'
AM_DEFAULT_VERBOSITY='1'
APIVERSION='1.11a'
AUTOCONF='${SHELL} /h/j/w/co/automake/lib/missing --run autoconf'
AUTOHEADER='${SHELL} /h/j/w/co/automake/lib/missing --run autoheader'
AUTOMAKE='perllibdir="/h/j/w/co/automake/lib:./lib"
"/h/j/w/co/automake/automake" --libdir=lib'
AWK='gawk'
CYGPATH_W='echo'
DEFS='-DPACKAGE_NAME=\"GNU\ Automake\" -DPACKAGE_TARNAME=\"automake\"
-DPACKAGE_VERSION=\"1.11a\" -DPACKAGE_STRING=\"GNU\ Automake\ 1.11a\"
-DPACKAGE_BUGREPORT=\"address@hidden"
-DPACKAGE_URL=\"http://www.gnu.org/software/automake/\"; -DPACKAGE=\"automake\"
-DVERSION=\"1.11a\"'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/p/bin/grep -E'
FGREP='/p/bin/grep -F'
GREP='/p/bin/grep'
HELP2MAN='${SHELL} /h/j/w/co/automake/lib/missing --run help2man'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LIBOBJS=''
LIBS=''
LN='ln'
LTLIBOBJS=''
MAKEINFO='${SHELL} /h/j/w/co/automake/lib/missing --run makeinfo'
MKDIR_P='/p/bin/mkdir -p'
MODIFICATION_DELAY='2'
PACKAGE='automake'
PACKAGE_BUGREPORT='address@hidden'
PACKAGE_NAME='GNU Automake'
PACKAGE_STRING='GNU Automake 1.11a'
PACKAGE_TARNAME='automake'
PACKAGE_URL='http://www.gnu.org/software/automake/'
PACKAGE_VERSION='1.11a'
PATH_SEPARATOR=':'
PERL='/usr/bin/perl'
PERL_THREADS='1'
SET_MAKE=''
SHELL='/bin/sh'
STRIP=''
TEX='tex'
VERSION='1.11a'
am_AUTOCONF='autoconf'
am_AUTOHEADER='autoheader'
am_AUTOM4TE='autom4te'
am_AUTORECONF='autoreconf'
am_AUTOUPDATE='autoupdate'
am__isrc=''
am__leading_dot='.'
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='${prefix}'
host_alias=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /h/j/w/co/automake/lib/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='/p/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
pkgvdatadir='${datadir}/automake-1.11a'
prefix='/p'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sh_errexit_works='yes'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "GNU Automake"
#define PACKAGE_TARNAME "automake"
#define PACKAGE_VERSION "1.11a"
#define PACKAGE_STRING "GNU Automake 1.11a"
#define PACKAGE_BUGREPORT "address@hidden"
#define PACKAGE_URL "http://www.gnu.org/software/automake/";
#define PACKAGE "automake"
#define VERSION "1.11a"
configure: exit 0
+ cat /h/j/w/co/automake/tests/aclocal-1.11a
#!/bin/sh
# tests/aclocal-1.11a. Generated from aclocal.in by configure.
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
fi
perllibdir="/h/j/w/co/automake/lib:/h/j/w/co/automake/lib"
export perllibdir
exec "/h/j/w/co/automake/aclocal" "--automake-acdir=/h/j/w/co/automake/m4" \
"--system-acdir=/h/j/w/co/automake/m4/acdir" ${1+"$@"}
+ cat /h/j/w/co/automake/tests/automake-1.11a
#!/bin/sh
# tests/automake-1.11a. Generated from automake.in by configure.
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
fi
perllibdir="/h/j/w/co/automake/lib:/h/j/w/co/automake/lib"
export perllibdir
exec "/h/j/w/co/automake/automake" "--libdir=/h/j/w/co/automake/lib" ${1+"$@"}
+ test 0 -eq 0
+ Exit 77
+ set +e
+ exit 77
+ exit 77
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'get-sysconf: exit 77'
get-sysconf: exit 77
+ exit 77
SKIP: amhello-cross-compile.test (exit: 77)
===========================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
amhello-cross-compile: running i586-mingw32msvc-gcc --version
./defs: line 595: i586-mingw32msvc-gcc: command not found
SKIP: ar-lib5a.test (exit: 77)
==============================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
ar-lib5a: running lib -out:defstest.lib
./defs: line 469: lib: command not found
ar-lib5a: skipped test: Microsoft `lib' utility not available
FAIL: color2.test (exit: 1)
===========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/color2.dir
+ TERM=ansi
+ export TERM
+ red='[0;31m'
+ grn='[0;32m'
+ lgn='[1;32m'
+ blu='[1;34m'
+ std='[m'
+ case `echo "$std" | grep .` in
++ echo '[m'
++ grep .
+ set +e
+ expect -c 'exit 77'
+ test 77 -eq 77
+ cat
+ cat
+ MAKE=make
+ expect -f expect-check
spawn make
stdout is a tty
+ rm -f check Makefile
+ cat
+ cat
+ cat
+ cat
+ cat
+ cp fail xfail
+ cp pass xpass
+ chmod +x pass fail skip xpass xfail
+ aclocal-1.11a -Werror
+ automake-1.11a --foreign -Werror -Wall
+ autoconf -B /no/such/dir
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
+ cat
+ MAKE=make
+ expect -f expect-make
+ cat stdout
spawn make -e check
+ test_color
+ cat stdout
+ /p/bin/grep -F '[0;32m'
+ grep ': pass'
+ exit_status=1
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'color2: exit 1'
color2: exit 1
+ exit 1
SKIP: compile4.test (exit: 77)
==============================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
compile4: running cl -?
./defs: line 369: cl: command not found
SKIP: compile5.test (exit: 77)
==============================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/compile5.dir
+ cp /h/j/w/co/automake/lib/compile .
+ cat
+ chmod +x ./cl
+ cat
+ :
+ cat
+ aclocal-1.11a -Werror
+ autoconf -B /no/such/dir
+ automake-1.11a --foreign -Werror -Wall -a
configure.in:4: installing `./config.guess'
configure.in:4: installing `./config.sub'
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating check_host
+ ./check_host
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'compile5: exit 77'
compile5: exit 77
+ exit 77
SKIP: cscope.test (exit: 77)
============================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/cscope.dir
+ cat
+ mkdir sub sub/subsub
+ cat
+ cat
+ echo 'int foo_func () { return 0; }'
+ echo 'int main () { return 0; }'
+ cat
+ :
+ echo 'int main () { return 0; }'
+ aclocal-1.11a -Werror
+ autoconf -B /no/such/dir
+ automake-1.11a --foreign -Werror -Wall --add-missing
Makefile.am:4: installing `./elisp-comp'
+ mkdir build
+ cd build
+ ../configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgfortran... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking for nagfor... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking whether we are using the GNU Fortran compiler... no
checking whether accepts -g... no
checking for gcj... no
checking dependency style of gcj... none
checking for emacs... emacs
checking where .elc files should go... ${datarootdir}/emacs/site-lisp
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating sub/Makefile
config.status: executing depfiles commands
+ make -n cscope
rm -f cscope.files
list='sub'; for subdir in $list; do \
test "$subdir" = . || (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make
cscopelist); \
done
make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
/p/bin/mkdir -p subsub
echo 'int generated_subsub () { return 0; }' > subsub/gen.c
list='subsub/dist.c subsub/gen.c '; \
case "../../sub" in \
[\\/]* | ?:[\\/]*) sdir="../../sub" ;; \
*) sdir=sub/../../sub ;; \
esac; \
for i in $list; do \
if test -f "$i"; then \
echo "sub/$i"; \
else \
echo "$sdir/$i"; \
fi; \
done >> ../cscope.files
make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
list='foo.c bar.cpp baz.f90 foo.el'; \
case ".." in \
[\\/]* | ?:[\\/]*) sdir=".." ;; \
*) sdir=./.. ;; \
esac; \
for i in $list; do \
if test -f "$i"; then \
echo "./$i"; \
else \
echo "$sdir/$i"; \
fi; \
done >> ./cscope.files
test ! -s cscope.files \
|| cscope -b -q -i cscope.files
+ : cscope
+ make cscope
rm -f cscope.files
list='sub'; for subdir in $list; do \
test "$subdir" = . || (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make
cscopelist); \
done
make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
/p/bin/mkdir -p subsub
echo 'int generated_subsub () { return 0; }' > subsub/gen.c
list='subsub/dist.c subsub/gen.c '; \
case "../../sub" in \
[\\/]* | ?:[\\/]*) sdir="../../sub" ;; \
*) sdir=sub/../../sub ;; \
esac; \
for i in $list; do \
if test -f "$i"; then \
echo "sub/$i"; \
else \
echo "$sdir/$i"; \
fi; \
done >> ../cscope.files
make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
list='foo.c bar.cpp baz.f90 foo.el'; \
case ".." in \
[\\/]* | ?:[\\/]*) sdir=".." ;; \
*) sdir=./.. ;; \
esac; \
for i in $list; do \
if test -f "$i"; then \
echo "./$i"; \
else \
echo "$sdir/$i"; \
fi; \
done >> ./cscope.files
test ! -s cscope.files \
|| cscope -b -q -i cscope.files
+ cat stderr
+ grep 'cannot find file' stderr
+ test -f cscope.files
+ /p/bin/grep -F foo.c cscope.files
./../foo.c
+ /p/bin/grep -F bar.cpp cscope.files
./../bar.cpp
+ /p/bin/grep -F sub/subsub/dist.c cscope.files
sub/../../sub/subsub/dist.c
+ /p/bin/grep -F sub/subsub/gen.c cscope.files
sub/subsub/gen.c
+ cp cscope.files cscope.files1
+ make cscope
rm -f cscope.files
list='sub'; for subdir in $list; do \
test "$subdir" = . || (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make
cscopelist); \
done
make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
list='subsub/dist.c subsub/gen.c '; \
case "../../sub" in \
[\\/]* | ?:[\\/]*) sdir="../../sub" ;; \
*) sdir=sub/../../sub ;; \
esac; \
for i in $list; do \
if test -f "$i"; then \
echo "sub/$i"; \
else \
echo "$sdir/$i"; \
fi; \
done >> ../cscope.files
make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
list='foo.c bar.cpp baz.f90 foo.el'; \
case ".." in \
[\\/]* | ?:[\\/]*) sdir=".." ;; \
*) sdir=./.. ;; \
esac; \
for i in $list; do \
if test -f "$i"; then \
echo "./$i"; \
else \
echo "$sdir/$i"; \
fi; \
done >> ./cscope.files
test ! -s cscope.files \
|| cscope -b -q -i cscope.files
+ diff cscope.files cscope.files1
+ make distclean
Making distclean in sub
make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
test -z "bar" || rm -f bar
test -z "subsub/gen.c" || rm -f subsub/gen.c
rm -f *.o
rm -f *.tab.c
test -z "" || rm -f
test . = "../../sub" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf ./.deps
rm -f Makefile
make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
Making distclean in .
make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build'
test -z "foo" || rm -f foo
rm -f elc-stamp foo.elc
rm -f *.o
rm -f *.tab.c
test -z "" || rm -f
test . = ".." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build'
rm -f config.status config.cache config.log configure.lineno
config.status.lineno
rm -rf ./.deps
rm -f Makefile
+ test '!' -f cscope.files
+ test '!' -f cscope.out
+ test '!' -f cscope.in.out
+ test '!' -f cscope.po.out
++ pwd
+ /h/j/w/co/automake/tests/cscope.dir/build/../configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgfortran... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking for nagfor... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking whether we are using the GNU Fortran compiler... no
checking whether accepts -g... no
checking for gcj... no
checking dependency style of gcj... none
checking for emacs... emacs
checking where .elc files should go... ${datarootdir}/emacs/site-lisp
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating sub/Makefile
config.status: executing depfiles commands
+ make cscope
rm -f cscope.files
list='sub'; for subdir in $list; do \
test "$subdir" = . || (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make
cscopelist); \
done
make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
/p/bin/mkdir -p subsub
echo 'int generated_subsub () { return 0; }' > subsub/gen.c
list='subsub/dist.c subsub/gen.c '; \
case "/h/j/w/co/automake/tests/cscope.dir/build/../sub" in \
[\\/]* | ?:[\\/]*) sdir="/h/j/w/co/automake/tests/cscope.dir/build/../sub" ;;
\
*) sdir=sub//h/j/w/co/automake/tests/cscope.dir/build/../sub ;; \
esac; \
for i in $list; do \
if test -f "$i"; then \
echo "sub/$i"; \
else \
echo "$sdir/$i"; \
fi; \
done >> ../cscope.files
make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
list='foo.c bar.cpp baz.f90 foo.el'; \
case "/h/j/w/co/automake/tests/cscope.dir/build/.." in \
[\\/]* | ?:[\\/]*) sdir="/h/j/w/co/automake/tests/cscope.dir/build/.." ;; \
*) sdir=.//h/j/w/co/automake/tests/cscope.dir/build/.. ;; \
esac; \
for i in $list; do \
if test -f "$i"; then \
echo "./$i"; \
else \
echo "$sdir/$i"; \
fi; \
done >> ./cscope.files
test ! -s cscope.files \
|| cscope -b -q -i cscope.files
+ cat stderr
+ grep 'cannot find file' stderr
+ make
Making all in sub
make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
gcc -DPACKAGE_NAME=\"cscope\" -DPACKAGE_TARNAME=\"cscope\"
-DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cscope\ 1.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cscope\"
-DVERSION=\"1.0\" -I. -I/h/j/w/co/automake/tests/cscope.dir/build/../sub -g
-O2 -MT dist.o -MD -MP -MF .deps/dist.Tpo -c -o dist.o `test -f 'subsub/dist.c'
|| echo '/h/j/w/co/automake/tests/cscope.dir/build/../sub/'`subsub/dist.c
mv -f .deps/dist.Tpo .deps/dist.Po
gcc -DPACKAGE_NAME=\"cscope\" -DPACKAGE_TARNAME=\"cscope\"
-DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cscope\ 1.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cscope\"
-DVERSION=\"1.0\" -I. -I/h/j/w/co/automake/tests/cscope.dir/build/../sub -g
-O2 -MT gen.o -MD -MP -MF .deps/gen.Tpo -c -o gen.o `test -f 'subsub/gen.c' ||
echo '/h/j/w/co/automake/tests/cscope.dir/build/../sub/'`subsub/gen.c
mv -f .deps/gen.Tpo .deps/gen.Po
gcc -g -O2 -o bar dist.o gen.o
make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build/sub'
make[1]: Entering directory `/h/j/w/co/automake/tests/cscope.dir/build'
gcc -DPACKAGE_NAME=\"cscope\" -DPACKAGE_TARNAME=\"cscope\"
-DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cscope\ 1.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cscope\"
-DVERSION=\"1.0\" -I. -I/h/j/w/co/automake/tests/cscope.dir/build/.. -g -O2
-MT foo.o -MD -MP -MF .deps/foo.Tpo -c -o foo.o
/h/j/w/co/automake/tests/cscope.dir/build/../foo.c
mv -f .deps/foo.Tpo .deps/foo.Po
g++ -DPACKAGE_NAME=\"cscope\" -DPACKAGE_TARNAME=\"cscope\"
-DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"cscope\ 1.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"cscope\"
-DVERSION=\"1.0\" -I. -I/h/j/w/co/automake/tests/cscope.dir/build/.. -g -O2
-MT bar.o -MD -MP -MF .deps/bar.Tpo -c -o bar.o
/h/j/w/co/automake/tests/cscope.dir/build/../bar.cpp
mv -f .deps/bar.Tpo .deps/bar.Po
c -o baz.o /h/j/w/co/automake/tests/cscope.dir/build/../baz.f90
make[1]: c: Command not found
make[1]: [baz.o] Error 127 (ignored)
g++ -g -O2 -o foo foo.o bar.o baz.o
g++: error: baz.o: No such file or directory
make[1]: *** [foo] Error 1
make[1]: Leaving directory `/h/j/w/co/automake/tests/cscope.dir/build'
make: *** [all-recursive] Error 1
+ Exit 77
+ set +e
+ exit 77
+ exit 77
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'cscope: exit 77'
cscope: exit 77
+ exit 77
SKIP: depcomp5.test (exit: 77)
==============================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
depcomp5: running icc -V -help
./defs: line 448: icc: command not found
SKIP: depcomp10.test (exit: 77)
===============================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
depcomp10: determine if make is GNU make
GNU Make 3.82
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
++ set -e
++ pwd
/h/j/w/co/automake/tests/depcomp10.dir
+ mkdir src src/sub build
+ cat
+ cat
+ cat
+ cat
+ cat
+ cat
+ aclocal-1.11a -Werror
+ autoconf -B /no/such/dir
+ automake-1.11a --foreign -Werror -Wall -a
configure.in:5: installing `./compile'
+ cd build
+ ../configure am_cv_CC_dependencies_compiler_type=hp
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... (cached) hp
checking whether gcc and cc understand -c and -o together... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: executing depfiles commands
+ make
Making all in src
make[1]: Entering directory `/h/j/w/co/automake/tests/depcomp10.dir/build/src'
source='../../src/foo.c' object='foo.o' libtool=no \
DEPDIR=.deps depmode=hp /bin/sh ../../depcomp \
gcc -DPACKAGE_NAME=\"depcomp10\" -DPACKAGE_TARNAME=\"depcomp10\"
-DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"depcomp10\ 1.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"depcomp10\"
-DVERSION=\"1.0\" -I. -I../../src -g -O2 -c -o foo.o ../../src/foo.c
cc1: error: unrecognized command line option '-M.deps/foo.TPo'
make[1]: *** [foo.o] Error 1
make[1]: Leaving directory `/h/j/w/co/automake/tests/depcomp10.dir/build/src'
make: *** [all-recursive] Error 1
+ Exit 77
+ set +e
+ exit 77
+ exit 77
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'depcomp10: exit 77'
depcomp10: exit 77
+ exit 77
SKIP: fort4.test (exit: 77)
===========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
fort4: running g77 --version
./defs: line 432: g77: command not found
fort4: skipped test: GNU Fortran 77 compiler not available
SKIP: fort5.test (exit: 77)
===========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
fort5: running libtoolize --version
libtoolize (GNU libtool) 2.4.2
Written by Gary V. Vaughan <address@hidden>, 2003
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
fort5: running g77 --version
./defs: line 432: g77: command not found
fort5: skipped test: GNU Fortran 77 compiler not available
SKIP: gcj4.test (exit: 77)
==========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
gcj4: running gcj --version
./defs: line 404: gcj: command not found
SKIP: gcj6.test (exit: 77)
==========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
gcj6: running gcj --version
./defs: line 404: gcj: command not found
SKIP: instdir-java.test (exit: 77)
==================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
instdir-java: running javac -version -help
./defs: line 456: javac: command not found
instdir-java: skipped test: java compiler not found
SKIP: instfail-java.test (exit: 77)
===================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
instfail-java: running javac -version -help
./defs: line 456: javac: command not found
instfail-java: skipped test: java compiler not found
SKIP: java.test (exit: 77)
==========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java: running javac -version -help
./defs: line 456: javac: command not found
java: skipped test: java compiler not found
SKIP: java-check.test (exit: 77)
================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-check: running javac -version -help
./defs: line 456: javac: command not found
java-check: skipped test: java compiler not found
SKIP: java-clean.test (exit: 77)
================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-clean: running javac -version -help
./defs: line 456: javac: command not found
java-clean: skipped test: java compiler not found
SKIP: java-empty-classpath.test (exit: 77)
==========================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-empty-classpath: running javac -version -help
./defs: line 456: javac: command not found
java-empty-classpath: skipped test: java compiler not found
SKIP: java-extra.test (exit: 77)
================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-extra: running javac -version -help
./defs: line 456: javac: command not found
java-extra: skipped test: java compiler not found
SKIP: java-noinst.test (exit: 77)
=================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-noinst: running javac -version -help
./defs: line 456: javac: command not found
java-noinst: skipped test: java compiler not found
SKIP: java-nobase.test (exit: 77)
=================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-nobase: running javac -version -help
./defs: line 456: javac: command not found
java-nobase: skipped test: java compiler not found
SKIP: java-compile-install.test (exit: 77)
==========================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-compile-install: running javac -version -help
./defs: line 456: javac: command not found
java-compile-install: skipped test: java compiler not found
SKIP: java-compile-run-flat.test (exit: 77)
===========================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-compile-run-flat: running java -version -help
java version "1.6.0_22"
OpenJDK Runtime Environment (IcedTea6 1.10.4) (fedora-61.1.10.4.fc16-x86_64)
OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
java-compile-run-flat: running javac -version -help
./defs: line 456: javac: command not found
java-compile-run-flat: skipped test: java compiler not found
SKIP: java-compile-run-nested.test (exit: 77)
=============================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-compile-run-nested: running java -version -help
java version "1.6.0_22"
OpenJDK Runtime Environment (IcedTea6 1.10.4) (fedora-61.1.10.4.fc16-x86_64)
OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode)
java-compile-run-nested: running javac -version -help
./defs: line 456: javac: command not found
java-compile-run-nested: skipped test: java compiler not found
SKIP: java-uninstall.test (exit: 77)
====================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-uninstall: running javac -version -help
./defs: line 456: javac: command not found
java-uninstall: skipped test: java compiler not found
SKIP: java-rebuild.test (exit: 77)
==================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
java-rebuild: running javac -version -help
./defs: line 456: javac: command not found
java-rebuild: skipped test: java compiler not found
FAIL: lex3.test (exit: 2)
=========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
lex3: running gcc --version
gcc (GCC) 4.7.0 20111202 (experimental)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
lex3: running gcc -v
Using built-in specs.
COLLECT_GCC=/p/bin/gcc
COLLECT_LTO_WRAPPER=/p/p/gcc-2011-12-02.12h37/libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-12-02.12h37
--disable-multilib --disable-libmudflap --disable-nls --enable-languages=c
Thread model: posix
gcc version 4.7.0 20111202 (experimental) (GCC)
lex3: running flex --version
flex 2.5.35
lex3: determine if make is GNU make
GNU Make 3.82
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
++ set -e
++ pwd
/h/j/w/co/automake/tests/lex3.dir
+ CFLAGS=
+ export CFLAGS
+ cat
+ cat
+ cat
+ aclocal-1.11a -Werror
+ autoconf -B /no/such/dir
+ automake-1.11a --foreign -Werror -Wall -a
configure.in: installing `./ylwrap'
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... none needed
checking whether yytext is a pointer... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
+ make
/bin/sh ./ylwrap foo.l lex.yy.c foo.c -- flex
gcc -DPACKAGE_NAME=\"lex3\" -DPACKAGE_TARNAME=\"lex3\"
-DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"lex3\ 1.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"lex3\"
-DVERSION=\"1.0\" -I. -MT foo.o -MD -MP -MF .deps/foo.Tpo -c -o foo.o foo.c
foo.l:24:5: error: redefinition of 'yywrap'
foo.l:18:5: note: previous definition of 'yywrap' was here
make: *** [foo.o] Error 1
+ exit_status=2
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'lex3: exit 2'
lex3: exit 2
+ exit 2
SKIP: lzip.test (exit: 77)
==========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
lzip: running lzip --version
./defs: line 595: lzip: command not found
SKIP: python-virtualenv.test (exit: 77)
=======================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
python-virtualenv: running python -V
Python 2.7.2
python-virtualenv: running virtualenv --version
./defs: line 595: virtualenv: command not found
SKIP: silentf77.test (exit: 77)
===============================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silentf77: running gfortran --version
./defs: line 420: gfortran: command not found
silentf77: skipped test: GNU Fortran compiler not available
SKIP: silentf90.test (exit: 77)
===============================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silentf90: running gfortran --version
./defs: line 420: gfortran: command not found
silentf90: skipped test: GNU Fortran compiler not available
SKIP: silent-many-gcc.test (exit: 77)
=====================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silent-many-gcc: running gcc --version
gcc (GCC) 4.7.0 20111202 (experimental)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
silent-many-gcc: running gcc -v
Using built-in specs.
COLLECT_GCC=/p/bin/gcc
COLLECT_LTO_WRAPPER=/p/p/gcc-2011-12-02.12h37/libexec/gcc/x86_64-unknown-linux-gnu/4.7.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /h/j/w/co/gcc-svn/configure --prefix=/p/p/gcc-2011-12-02.12h37
--disable-multilib --disable-libmudflap --disable-nls --enable-languages=c
Thread model: posix
gcc version 4.7.0 20111202 (experimental) (GCC)
silent-many-gcc: running g++ --version
g++ (GCC) 4.6.2 20111027 (Red Hat 4.6.2-1)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
silent-many-gcc: running g++ -v
Using built-in specs.
COLLECT_GCC=/usr/bin/g++
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/4.6.2/lto-wrapper
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
--infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla
--enable-bootstrap --enable-shared --enable-threads=posix
--enable-checking=release --with-system-zlib --enable-__cxa_atexit
--disable-libunwind-exceptions --enable-gnu-unique-object
--enable-linker-build-id
--enable-languages=c,c++,objc,obj-c++,java,fortran,ada,go,lto --enable-plugin
--enable-java-awt=gtk --disable-dssi
--with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre
--enable-libgcj-multifile --enable-java-maintainer-mode
--with-ecj-jar=/usr/share/java/eclipse-ecj.jar --disable-libjava-multilib
--with-ppl --with-cloog --with-tune=generic --with-arch_32=i686
--build=x86_64-redhat-linux
Thread model: posix
gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC)
silent-many-gcc: running gfortran --version
./defs: line 420: gfortran: command not found
silent-many-gcc: skipped test: GNU Fortran compiler not available
SKIP: silent-many-generic.test (exit: 77)
=========================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
silent-many-generic: running g++ --version
g++ (GCC) 4.6.2 20111027 (Red Hat 4.6.2-1)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
silent-many-generic: running g++ -v
Using built-in specs.
COLLECT_GCC=/usr/bin/g++
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/4.6.2/lto-wrapper
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
--infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla
--enable-bootstrap --enable-shared --enable-threads=posix
--enable-checking=release --with-system-zlib --enable-__cxa_atexit
--disable-libunwind-exceptions --enable-gnu-unique-object
--enable-linker-build-id
--enable-languages=c,c++,objc,obj-c++,java,fortran,ada,go,lto --enable-plugin
--enable-java-awt=gtk --disable-dssi
--with-java-home=/usr/lib/jvm/java-1.5.0-gcj-1.5.0.0/jre
--enable-libgcj-multifile --enable-java-maintainer-mode
--with-ecj-jar=/usr/share/java/eclipse-ecj.jar --disable-libjava-multilib
--with-ppl --with-cloog --with-tune=generic --with-arch_32=i686
--build=x86_64-redhat-linux
Thread model: posix
gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC)
silent-many-generic: running gfortran --version
./defs: line 420: gfortran: command not found
silent-many-generic: skipped test: GNU Fortran compiler not available
SKIP: upc.test (exit: 77)
=========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/upc.dir
+ cat
+ cat
+ cat
+ aclocal-1.11a -Werror
+ automake-1.11a --foreign -Werror -Wall
+ autoconf -B /no/such/dir
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for upcc... no
checking for upc... no
configure: error: no Unified Parallel C compiler was found
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'upc: exit 77'
upc: exit 77
+ exit 77
SKIP: upc3.test (exit: 77)
==========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
++ set -e
++ pwd
/h/j/w/co/automake/tests/upc3.dir
+ cat
+ cat
+ cat
+ cat
+ cat
+ aclocal-1.11a -Werror
+ automake-1.11a --foreign -Werror -Wall
+ autoconf -B /no/such/dir
+ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for upcc... no
checking for upc... no
configure: error: no Unified Parallel C compiler was found
+ exit_status=77
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'upc3: exit 77'
upc3: exit 77
+ exit 77
SKIP: vala2.test (exit: 77)
===========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
vala2: running libtool --version
libtool (GNU libtool) 2.4.2
Written by Gordon Matzigkeit <address@hidden>, 1996
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala2: running libtoolize --version
libtoolize (GNU libtool) 2.4.2
Written by Gary V. Vaughan <address@hidden>, 2003
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala2: running pkg-config --version
0.25
vala2: running valac --version
./defs: line 595: valac: command not found
SKIP: vala3.test (exit: 77)
===========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
vala3: running libtool --version
libtool (GNU libtool) 2.4.2
Written by Gordon Matzigkeit <address@hidden>, 1996
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala3: running libtoolize --version
libtoolize (GNU libtool) 2.4.2
Written by Gary V. Vaughan <address@hidden>, 2003
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala3: running pkg-config --version
0.25
vala3: running valac --version
./defs: line 595: valac: command not found
SKIP: vala5.test (exit: 77)
===========================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
vala5: running libtool --version
libtool (GNU libtool) 2.4.2
Written by Gordon Matzigkeit <address@hidden>, 1996
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala5: running libtoolize --version
libtoolize (GNU libtool) 2.4.2
Written by Gary V. Vaughan <address@hidden>, 2003
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala5: running pkg-config --version
0.25
vala5: running valac --version
./defs: line 595: valac: command not found
SKIP: vala-vpath.test (exit: 77)
================================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
vala-vpath: running valac --version
./defs: line 595: valac: command not found
FAIL: color2-p.test (exit: 1)
=============================
/h/j/w/co/automake/tests:/opt/cov-sa-linux64-5.4.0/bin:/usr/lib64/ccache:/h/j/bin/perl:/h/j/bin:/p/p/git/bin:/p/bin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/local:/usr/local/bin
+++ set -e
+++ pwd
/h/j/w/co/automake/tests/color2-p.dir
++ TERM=ansi
++ export TERM
++ red='[0;31m'
++ grn='[0;32m'
++ lgn='[1;32m'
++ blu='[1;34m'
++ std='[m'
++ case `echo "$std" | grep .` in
+++ echo '[m'
+++ grep .
++ set +e
++ expect -c 'exit 77'
++ test 77 -eq 77
++ cat
++ cat
++ MAKE=make
++ expect -f expect-check
spawn make
stdout is a tty
++ rm -f check Makefile
++ cat
++ cat
++ cat
++ cat
++ cat
++ cp fail xfail
++ cp pass xpass
++ chmod +x pass fail skip xpass xfail
++ aclocal-1.11a -Werror
++ automake-1.11a --foreign -Werror -Wall
++ autoconf -B /no/such/dir -B /no/such/dir
++ ./configure
checking for a BSD-compatible install... /p/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /p/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
++ cat
++ MAKE=make
++ expect -f expect-make
++ cat stdout
spawn make -e check
++ test_color
++ cat stdout
++ grep ': pass'
++ /p/bin/grep -F '[0;32m'
+ exit_status=1
+ set +e
+ cd /h/j/w/co/automake/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo 'color2-p: exit 1'
color2-p: exit 1
+ exit 1
--- End Message ---