>From 394dc613521e7d2f4074b3311a5c8da6945e655e Mon Sep 17 00:00:00 2001 From: Paul Eggert Date: Mon, 9 Apr 2018 13:34:44 -0700 Subject: [PATCH] make-dist: check exit statuses more carefully * make-dist: Do a better job checking for subprocess failure. --- make-dist | 250 ++++++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 144 insertions(+), 106 deletions(-) diff --git a/make-dist b/make-dist index d651e18b83..7fd227862b 100755 --- a/make-dist +++ b/make-dist @@ -346,7 +346,7 @@ tempparent= echo "Creating staging directory: '${tempparent}'" -mkdir ${tempparent} +mkdir ${tempparent} || exit tempdir="${tempparent}/${emacsname}" ### This trap ensures that the staging directory will be cleaned up even @@ -356,7 +356,7 @@ tempdir= fi echo "Creating top directory: '${tempdir}'" -mkdir ${tempdir} +mkdir ${tempdir} || exit if [ "$changelog" = yes ]; then if test -r .git; then @@ -379,10 +379,13 @@ tempdir= ### tar file; this means that people can start reading the INSTALL and ### README while the rest of the tar file is still unpacking. Whoopee. echo "Making links to top-level files" -ln INSTALL README BUGS ${tempdir} -ln ChangeLog.*[0-9] Makefile.in autogen.sh configure configure.ac ${tempdir} -ln config.bat make-dist .dir-locals.el ${tempdir} -ln aclocal.m4 CONTRIBUTE ChangeLog ${tempdir} +top_level=' + INSTALL README BUGS + ChangeLog.*[0-9] Makefile.in autogen.sh configure configure.ac + config.bat make-dist .dir-locals.el + aclocal.m4 CONTRIBUTE ChangeLog +' +ln $top_level $tempdir || exit echo "Creating subdirectories" for subdir in site-lisp \ @@ -412,132 +415,151 @@ tempdir= [ "$subdir" = "site-lisp" ] || [ -d "$subdir" ] || \ echo "WARNING: $subdir not found, making anyway" [ "$verbose" = "yes" ] && echo " ${tempdir}/${subdir}" - mkdir ${tempdir}/${subdir} + mkdir ${tempdir}/${subdir} || exit done echo "Making links to 'lisp' and its subdirectories" files=`find lisp \( -name '*.el' -o -name '*.elc' -o -name 'ChangeLog*' \ - -o -name 'README' \)` + -o -name 'README' \)` || exit ### Don't distribute site-init.el, site-load.el, or default.el. for file in lisp/Makefile.in $files; do case $file in */site-init*|*/site-load*|*/default*) continue ;; esac - ln $file $tempdir/$file + ln $file $tempdir/$file || exit done echo "Making links to 'leim' and its subdirectories" -(cd leim - ln ChangeLog.*[0-9] README ../${tempdir}/leim - ln CXTERM-DIC/README CXTERM-DIC/*.tit ../${tempdir}/leim/CXTERM-DIC - ln SKK-DIC/README SKK-DIC/SKK-JISYO.L ../${tempdir}/leim/SKK-DIC - ln MISC-DIC/README MISC-DIC/*.* ../${tempdir}/leim/MISC-DIC - ln Makefile.in ../${tempdir}/leim/Makefile.in - ln leim-ext.el ../${tempdir}/leim/leim-ext.el) +(cd leim && + ln ChangeLog.*[0-9] README ../${tempdir}/leim && + ln CXTERM-DIC/README CXTERM-DIC/*.tit ../${tempdir}/leim/CXTERM-DIC && + ln SKK-DIC/README SKK-DIC/SKK-JISYO.L ../${tempdir}/leim/SKK-DIC && + ln MISC-DIC/README MISC-DIC/*.* ../${tempdir}/leim/MISC-DIC && + ln Makefile.in ../${tempdir}/leim/Makefile.in && + ln leim-ext.el ../${tempdir}/leim/leim-ext.el && +:) || exit ## FIXME Can we not just use the "find -type f" method for this one? echo "Making links to 'build-aux'" -(cd build-aux - ln config.guess config.sub msys-to-w32 ../${tempdir}/build-aux - ln gitlog-to-changelog gitlog-to-emacslog ../${tempdir}/build-aux - ln install-sh move-if-change ../${tempdir}/build-aux - ln update-copyright update-subdirs ../${tempdir}/build-aux - ln dir_top make-info-dir ../${tempdir}/build-aux) +(cd build-aux && + ln config.guess config.sub msys-to-w32 ../${tempdir}/build-aux && + ln gitlog-to-changelog gitlog-to-emacslog ../${tempdir}/build-aux && + ln install-sh move-if-change ../${tempdir}/build-aux && + ln update-copyright update-subdirs ../${tempdir}/build-aux && + ln dir_top make-info-dir ../${tempdir}/build-aux && +:) || exit echo "Making links to 'src'" ### Don't distribute the configured versions of ### config.in, paths.in, buildobj.h, or Makefile.in. -(cd src - echo " (It is ok if ln fails in some cases.)" - ln [a-zA-Z]*.[chm] ../${tempdir}/src - ln [a-zA-Z]*.in ../${tempdir}/src - ln deps.mk ../${tempdir}/src - ln README ChangeLog.*[0-9] ../${tempdir}/src - ln .gdbinit .dbxinit ../${tempdir}/src - cd ../${tempdir}/src - rm -f globals.h config.h epaths.h Makefile buildobj.h) +(cd src && + ln [a-zA-Z]*.[chm] ../${tempdir}/src && + ln [a-zA-Z]*.in ../${tempdir}/src && + ln deps.mk ../${tempdir}/src && + ln README ChangeLog.*[0-9] ../${tempdir}/src && + ln .gdbinit .dbxinit ../${tempdir}/src && + cd ../${tempdir}/src && + rm -f globals.h config.h epaths.h Makefile buildobj.h && +:) || exit echo "Making links to 'src/bitmaps'" -(cd src/bitmaps - ln README *.xbm ../../${tempdir}/src/bitmaps) +(cd src/bitmaps && + ln README *.xbm ../../${tempdir}/src/bitmaps && +:) || exit echo "Making links to 'lib'" -(cd lib - ln [a-zA-Z_]*.[ch] ../${tempdir}/lib - ln gnulib.mk.in Makefile.in ../${tempdir}/lib - cd ../${tempdir}/lib - script='/[*]/d; s/\.in\.h$/.h/' - rm -f `ls *.in.h | sed "$script"`) +(cd lib && + ln [a-zA-Z_]*.[ch] ../${tempdir}/lib && + ln gnulib.mk.in Makefile.in ../${tempdir}/lib && + cd ../${tempdir}/lib && + script='/[*]/d; s/\.in\.h$/.h/' && + rm -f `ls *.in.h | sed "$script"` && +:) || exit echo "Making links to 'lib-src'" -(cd lib-src - ln [a-zA-Z]*.[ch] ../${tempdir}/lib-src - ln ChangeLog.*[0-9] Makefile.in README ../${tempdir}/lib-src - ln rcs2log ../${tempdir}/lib-src) +(cd lib-src && + ln [a-zA-Z]*.[ch] ../${tempdir}/lib-src && + ln ChangeLog.*[0-9] Makefile.in README ../${tempdir}/lib-src && + ln rcs2log ../${tempdir}/lib-src && +:) || exit echo "Making links to 'm4'" -(cd m4 - ln *.m4 ../${tempdir}/m4) +(cd m4 && + ln *.m4 ../${tempdir}/m4 && +:) || exit echo "Making links to 'modules'" -(cd modules - ln *.py ../${tempdir}/modules -) +(cd modules && + ln *.py ../${tempdir}/modules && +:) || exit echo "Making links to 'nt'" -(cd nt - ln emacs-x86.manifest emacs-x64.manifest ../${tempdir}/nt - ln [a-z]*.bat [a-z]*.[ch] ../${tempdir}/nt - ln *.in gnulib-cfg.mk ../${tempdir}/nt - ln mingw-cfg.site epaths.nt INSTALL.W64 ../${tempdir}/nt - ln ChangeLog.*[0-9] INSTALL README README.W32 ../${tempdir}/nt) +(cd nt && + ln emacs-x86.manifest emacs-x64.manifest ../${tempdir}/nt && + ln [a-z]*.bat [a-z]*.[ch] ../${tempdir}/nt && + ln *.in gnulib-cfg.mk ../${tempdir}/nt && + ln mingw-cfg.site epaths.nt INSTALL.W64 ../${tempdir}/nt && + ln ChangeLog.*[0-9] INSTALL README README.W32 ../${tempdir}/nt && +:) || exit echo "Making links to 'nt/inc' and its subdirectories" for f in `find nt/inc -type f -name '[a-z]*.h'`; do - ln $f $tempdir/$f + ln $f $tempdir/$f || exit done echo "Making links to 'nt/icons'" -(cd nt/icons - ln README [a-z]*.ico ../../${tempdir}/nt/icons - ln [a-z]*.cur ../../${tempdir}/nt/icons) +(cd nt/icons && + ln README [a-z]*.ico ../../${tempdir}/nt/icons && + ln [a-z]*.cur ../../${tempdir}/nt/icons && +:) || exit echo "Making links to 'msdos'" -(cd msdos - ln ChangeLog.*[0-9] INSTALL README emacs.ico emacs.pif ../${tempdir}/msdos - ln depfiles.bat inttypes.h ../${tempdir}/msdos - ln mainmake.v2 sed*.inp ../${tempdir}/msdos) +(cd msdos && + ln ChangeLog.*[0-9] INSTALL README emacs.ico emacs.pif ../${tempdir}/msdos && + ln depfiles.bat inttypes.h ../${tempdir}/msdos && + ln mainmake.v2 sed*.inp ../${tempdir}/msdos && +:) || exit echo "Making links to 'nextstep'" -(cd nextstep - ln ChangeLog.*[0-9] README INSTALL Makefile.in ../${tempdir}/nextstep) +(cd nextstep && + ln ChangeLog.*[0-9] README INSTALL Makefile.in ../${tempdir}/nextstep && +:) || exit echo "Making links to 'nextstep/templates'" -(cd nextstep/templates - ln Emacs.desktop.in Info-gnustep.plist.in Info.plist.in InfoPlist.strings.in ../../${tempdir}/nextstep/templates) +(cd nextstep/templates && + ln Emacs.desktop.in Info-gnustep.plist.in Info.plist.in InfoPlist.strings.in \ + ../../${tempdir}/nextstep/templates && +:) || exit echo "Making links to 'nextstep/Cocoa/Emacs.base/Contents'" -(cd nextstep/Cocoa/Emacs.base/Contents - ln PkgInfo ../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents) +(cd nextstep/Cocoa/Emacs.base/Contents && + ln PkgInfo ../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents && +:) || exit echo "Making links to 'nextstep/Cocoa/Emacs.base/Contents/Resources'" -(cd nextstep/Cocoa/Emacs.base/Contents/Resources - ln Credits.html *.icns ../../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents/Resources) +(cd nextstep/Cocoa/Emacs.base/Contents/Resources && + ln Credits.html *.icns \ + ../../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents/Resources && +:) || exit echo "Making links to 'nextstep/GNUstep/Emacs.base/Resources'" -(cd nextstep/GNUstep/Emacs.base/Resources - ln README emacs.tiff ../../../../${tempdir}/nextstep/GNUstep/Emacs.base/Resources ) +(cd nextstep/GNUstep/Emacs.base/Resources && + ln README emacs.tiff \ + ../../../../${tempdir}/nextstep/GNUstep/Emacs.base/Resources && +:) || exit echo "Making links to 'oldXMenu'" -(cd oldXMenu - ln *.[ch] *.in *.mk ../${tempdir}/oldXMenu - ln README ChangeLog.*[0-9] ../${tempdir}/oldXMenu) +(cd oldXMenu && + ln *.[ch] *.in *.mk ../${tempdir}/oldXMenu && + ln README ChangeLog.*[0-9] ../${tempdir}/oldXMenu && +:) || exit echo "Making links to 'lwlib'" -(cd lwlib - ln *.[ch] *.in *.mk ../${tempdir}/lwlib - ln README ChangeLog.*[0-9] ../${tempdir}/lwlib) +(cd lwlib && + ln *.[ch] *.in *.mk ../${tempdir}/lwlib && + ln README ChangeLog.*[0-9] ../${tempdir}/lwlib && +:) || exit ## It is important to distribute admin/ because it contains sources ## for generated lisp/international/uni-*.el files. @@ -546,7 +568,7 @@ files= case $f in */Makefile) [ -f $f.in ] && continue ;; esac - ln $f $tempdir/$f + ln $f $tempdir/$f || exit done if [ "$with_tests" = "yes" ]; then @@ -557,7 +579,7 @@ files= case $f in */Makefile) [ -f $f.in ] && continue ;; esac - ln $f $tempdir/$f + ln $f $tempdir/$f || exit done fi @@ -569,45 +591,50 @@ files= etc/refcards/*.aux|etc/refcards/*.dvi|etc/refcards/*.log|etc/refcards/*.ps) continue ;; esac - ln $f $tempdir/$f + ln $f $tempdir/$f || exit done echo "Making links to 'info'" -ln `find info -type f -print` ${tempdir}/info +ln `find info -type f -print` ${tempdir}/info || exit echo "Making links to 'doc/emacs'" -(cd doc/emacs - ln *.texi *.in ChangeLog.*[0-9] ../../${tempdir}/doc/emacs) +(cd doc/emacs && + ln *.texi *.in ChangeLog.*[0-9] ../../${tempdir}/doc/emacs && +:) || exit echo "Making links to 'doc/misc'" -(cd doc/misc +(cd doc/misc && ln *.texi *.tex *.in gnus-news.el ChangeLog.*[0-9] \ - ../../${tempdir}/doc/misc) + ../../${tempdir}/doc/misc && +:) || exit echo "Making links to 'doc/lispref'" -(cd doc/lispref - ln *.texi *.in README ChangeLog.*[0-9] ../../${tempdir}/doc/lispref - ln spellfile ../../${tempdir}/doc/lispref - ln two-volume.make two-volume-cross-refs.txt ../../${tempdir}/doc/lispref) +(cd doc/lispref && + ln *.texi *.in README ChangeLog.*[0-9] ../../${tempdir}/doc/lispref && + ln spellfile ../../${tempdir}/doc/lispref && + ln two-volume.make two-volume-cross-refs.txt ../../${tempdir}/doc/lispref && +:) || exit echo "Making links to 'doc/lispintro'" -(cd doc/lispintro - ln *.texi *.in *.eps *.pdf ../../${tempdir}/doc/lispintro - ln README ChangeLog.*[0-9] ../../${tempdir}/doc/lispintro - cd ../../${tempdir}/doc/lispintro) +(cd doc/lispintro && + ln *.texi *.in *.eps *.pdf ../../${tempdir}/doc/lispintro && + ln README ChangeLog.*[0-9] ../../${tempdir}/doc/lispintro && + cd ../../${tempdir}/doc/lispintro && +:) || exit echo "Making links to 'doc/man'" -(cd doc/man - ln *.*[0-9] *.in ../../${tempdir}/doc/man - cd ../../${tempdir}/doc/man - rm -f emacs.1) +(cd doc/man && + ln *.*[0-9] *.in ../../${tempdir}/doc/man && + cd ../../${tempdir}/doc/man && + rm -f emacs.1 && +:) || exit ### It would be nice if they could all be symlinks to top-level copy, but ### you're not supposed to have any symlinks in distribution tar files. echo "Making sure copying notices are all copies of 'COPYING'" for subdir in . etc leim lib lib-src lisp lwlib msdos nt src; do - rm -f ${tempdir}/${subdir}/COPYING - cp COPYING ${tempdir}/${subdir} + rm -f ${tempdir}/${subdir}/COPYING || exit + cp COPYING ${tempdir}/${subdir} || exit done if [ "${newer}" ]; then @@ -615,12 +642,13 @@ files= ## We remove .elc files unconditionally, on the theory that anyone picking ## up an incremental distribution already has a running Emacs to byte-compile ## them with. - find ${tempparent} \( -name '*.elc' -o ! -newer ${newer} \) -exec rm -f {} \; + find ${tempparent} \( -name '*.elc' -o ! -newer ${newer} \) \ + -exec rm -f {} \; || exit fi ## Don't distribute backups, autosaves, etc. echo "Removing unwanted files" -find ${tempparent} \( -name '*~' -o -name '#*#' -o -name '.*ignore' -o -name '=*' -o -name 'TAGS' \) -exec rm -f {} \; +find ${tempparent} \( -name '*~' -o -name '#*#' -o -name '.*ignore' -o -name '=*' -o -name 'TAGS' \) -exec rm -f {} \; || exit if [ "${make_tar}" = yes ]; then echo "Looking for $default_gzip" @@ -648,13 +676,23 @@ files= taropt="$taropt --sort=name" [ "$verbose" = "yes" ] && taropt="$taropt --verbose" - (cd ${tempparent} ; tar $taropt -cf - ${emacsname} ) \ - | ${default_gzip} \ - > ${emacsname}.tar${gzip_extension} + (cd $tempparent && + case $default_gzip in + cat) tar $taropt -cf - $emacsname;; + *) if tar $taropt -cf /dev/null --use-compress-program="$default_gzip" \ + $emacsname/src/lisp.h + then + tar $taropt -cf - --use-compress-program="$default_gzip" $emacsname + else + tar $taropt -cf $emacsname.tar $emacsname && + $default_gzip <$emacsname.tar + fi;; + esac + ) >$emacsname.tar$gzip_extension || exit fi if [ "${clean_up}" != yes ]; then - (cd ${tempparent}; mv ${emacsname} ..) + (cd ${tempparent} && mv ${emacsname} ..) && rm -rf ${tempparent} fi -- 2.14.3