[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/etc/termcap.src
|
From: |
Miles Bader |
|
Subject: |
[Emacs-diffs] Changes to emacs/etc/termcap.src |
|
Date: |
Fri, 04 Apr 2003 01:38:23 -0500 |
Index: emacs/etc/termcap.src
diff -c emacs/etc/termcap.src:1.4 emacs/etc/termcap.src:1.5
*** emacs/etc/termcap.src:1.4 Sat Apr 20 03:38:53 2002
--- emacs/etc/termcap.src Tue Feb 4 09:30:42 2003
***************
*** 10,16 ****
#
#------------------------------------------------------------------------------
# Version 10.2.1
! # $Date: 2002/04/20 07:38:53 $
# terminfo syntax
#
# Eric S. Raymond (current maintainer)
--- 10,16 ----
#
#------------------------------------------------------------------------------
# Version 10.2.1
! # $Date: 2003/02/04 14:30:42 $
# terminfo syntax
#
# Eric S. Raymond (current maintainer)
***************
*** 44,50 ****
# This file assumes a US-ASCII character set. If you need to fix this, start
# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
# for your character set. \E(A and \E)A enables the British character set
! # with the pound sign at position 2/3.
#
# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
# C1 characters are considered the first-byte set of the Japanese encodings,
--- 44,50 ----
# This file assumes a US-ASCII character set. If you need to fix this, start
# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
# for your character set. \E(A and \E)A enables the British character set
! # with the pound sign at position 2/3.
#
# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
# C1 characters are considered the first-byte set of the Japanese encodings,
***************
*** 70,76 ****
# string-table limit of archaic termcap libraries except where explicitly
# noted below. Note that the termcap translation assumes that your termcap
# library can handle multiple tc capabilities in an entry. 4.4BSD has this
! # capability. Older versions of GNU termcap, through 1.3, do not.
#
# For details on these formats, see terminfo(5) in the ncurses distribution,
# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
--- 70,76 ----
# string-table limit of archaic termcap libraries except where explicitly
# noted below. Note that the termcap translation assumes that your termcap
# library can handle multiple tc capabilities in an entry. 4.4BSD has this
! # capability. Older versions of GNU termcap, through 1.3, do not.
#
# For details on these formats, see terminfo(5) in the ncurses distribution,
# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
***************
*** 102,108 ****
# the master format). Individual capabilities are commented out by
# placing a period between the colon and the capability name.
#
! # The file is divided up into major sections (headed by lines beginning with
# the string "########") and minor sections (beginning with "####"); do
#
# grep "^####" <file> | more
--- 102,108 ----
# the master format). Individual capabilities are commented out by
# placing a period between the colon and the capability name.
#
! # The file is divided up into major sections (headed by lines beginning with
# the string "########") and minor sections (beginning with "####"); do
#
# grep "^####" <file> | more
***************
*** 112,118 ****
# that important and frequently-encountered terminal types are near the
# front (so that you'll get reasonable search efficiency from a linear
# search of the termcap form even if you don't use reorder). Minor sections
! # usually correspond to manufacturers or standard terminal classes.
# Parenthesized words following manufacturer names are type prefixes or
# product line names used by that manufacturers.
#
--- 112,118 ----
# that important and frequently-encountered terminal types are near the
# front (so that you'll get reasonable search efficiency from a linear
# search of the termcap form even if you don't use reorder). Minor sections
! # usually correspond to manufacturers or standard terminal classes.
# Parenthesized words following manufacturer names are type prefixes or
# product line names used by that manufacturers.
#
***************
*** 145,162 ****
# -s Enable status line.
# -vb Use visible bell (:vb:) rather than :bl:.
# -w Wide - in 132 column mode.
! # If a name has multiple suffixes and one is a line height, that one should
! # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
! #
# Entries with embedded plus signs are designed to be included through use/tc
! # capabilities, not used as standalone entries.
#
# To avoid search clashes, some older all-numeric names for terminals have
# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
# All primary names of terminals now have alphanumeric prefixes.
#
# Comments marked "esr" are mostly results of applying the termcap-compiler
! # code packaged with ncurses and contemplating the resulting error messages.
# In many cases, these indicated obvious fixes to syntax garbled by the
# composers. In a few cases, I was able to deduce corrected forms for garbled
# capabilities by looking at context. All the information in the original
--- 145,162 ----
# -s Enable status line.
# -vb Use visible bell (:vb:) rather than :bl:.
# -w Wide - in 132 column mode.
! # If a name has multiple suffixes and one is a line height, that one should
! # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
! #
# Entries with embedded plus signs are designed to be included through use/tc
! # capabilities, not used as standalone entries.
#
# To avoid search clashes, some older all-numeric names for terminals have
# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
# All primary names of terminals now have alphanumeric prefixes.
#
# Comments marked "esr" are mostly results of applying the termcap-compiler
! # code packaged with ncurses and contemplating the resulting error messages.
# In many cases, these indicated obvious fixes to syntax garbled by the
# composers. In a few cases, I was able to deduce corrected forms for garbled
# capabilities by looking at context. All the information in the original
***************
*** 191,197 ****
# %c Accept any character
# %[...] Accept any number of characters in the given set
#
! # The cursor position report (<u6>) string must contain two scanf(3)-style
# %d format elements. The first of these must correspond to the Y coordinate
# and the second to the %d. If the string contains the sequence %i, it is
# taken as an instruction to decrement each value after reading it (this is
--- 191,197 ----
# %c Accept any character
# %[...] Accept any number of characters in the given set
#
! # The cursor position report (<u6>) string must contain two scanf(3)-style
# %d format elements. The first of these must correspond to the Y coordinate
# and the second to the %d. If the string contains the sequence %i, it is
# taken as an instruction to decrement each value after reading it (this is
***************
*** 206,217 ****
# All the entries in this file have been edited to assume that the tabset
# files directory is /usr/share/tabset, in conformance with the File Hierarchy
# Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
! # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
#
# No curses package we know of actually uses these files. If their location
# is an issue, you will have to hand-patch the file locations before compiling
# this file.
! #
# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
#
# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
--- 206,217 ----
# All the entries in this file have been edited to assume that the tabset
# files directory is /usr/share/tabset, in conformance with the File Hierarchy
# Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
! # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
#
# No curses package we know of actually uses these files. If their location
# is an issue, you will have to hand-patch the file locations before compiling
# this file.
! #
# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
#
# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
***************
*** 233,240 ****
# I'm especially interested in identifying the obscure entries listed under
# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
# wisdom about them gets lost. If you know a lot about obscure old terminals,
! # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
! # eyeball it for things you can identify and describe.
#
# If you have been around long enough to contribute, please read the file
# with this in mind and send me your annotations.
--- 233,240 ----
# I'm especially interested in identifying the obscure entries listed under
# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
# wisdom about them gets lost. If you know a lot about obscure old terminals,
! # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
! # eyeball it for things you can identify and describe.
#
# If you have been around long enough to contribute, please read the file
# with this in mind and send me your annotations.
***************
*** 245,251 ****
# California copyright with dates from 1980 to 1993.
#
# Some information has been merged in from a terminfo file SCO distributes.
! # It has an obnoxious boilerplate copyright which I'm ignoring because they
# took so much of the content from the ancestral BSD versions of this file
# and didn't attribute it, thereby violating the BSD Regents' copyright.
#
--- 245,251 ----
# California copyright with dates from 1980 to 1993.
#
# Some information has been merged in from a terminfo file SCO distributes.
! # It has an obnoxious boilerplate copyright which I'm ignoring because they
# took so much of the content from the ancestral BSD versions of this file
# and didn't attribute it, thereby violating the BSD Regents' copyright.
#
***************
*** 255,261 ****
# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
#
# This file deliberately has no copyright. It belongs to no one and everyone.
! # If you claim you own it, you will merely succeed in looking like a fool.
# Use it as you like. Use it at your own risk. Copy and redistribute freely.
# There are no guarantees anywhere. Svaha!
#
--- 255,261 ----
# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
#
# This file deliberately has no copyright. It belongs to no one and everyone.
! # If you claim you own it, you will merely succeed in looking like a fool.
# Use it as you like. Use it at your own risk. Copy and redistribute freely.
# There are no guarantees anywhere. Svaha!
#
***************
*** 353,359 ****
:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:ae=\E[10m:as=\E[11m:
! # Highlight controls corresponding to the ANSI.SYS standard. Most
# console drivers for Intel boxes obey these. Makes the same assumption
# about \E[11m as klone+acs. True ANSI/ECMA-48 would have :se=\E[27m:,
# :ue=\E[24m:, but this isn't a documented feature of ANSI.SYS.
--- 353,359 ----
:ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
:ae=\E[10m:as=\E[11m:
! # Highlight controls corresponding to the ANSI.SYS standard. Most
# console drivers for Intel boxes obey these. Makes the same assumption
# about \E[11m as klone+acs. True ANSI/ECMA-48 would have :se=\E[27m:,
# :ue=\E[24m:, but this isn't a documented feature of ANSI.SYS.
***************
*** 429,441 ****
:am:xo:\
:co#80:li#24:tc=vanilla:tc=ansi+erase:tc=ansi+local1:
! # ansi-mini is a bare minimum ANSI terminal. This should work on anything,
but
# beware of screen size problems and memory relative cursor addressing.
ansi-mini|any ansi terminal with pessimistic assumptions:\
:am:xo:\
:co#80:li#24:tc=vanilla:tc=ansi+cup:tc=ansi+erase:
! # ansi-mtabs adds relative addressing and minimal tab support
ansi-mtabs|any ansi terminal with pessimistic assumptions:\
:it#8:\
:ta=^I:tc=ansi+local1:tc=ansi-mini:
--- 429,441 ----
:am:xo:\
:co#80:li#24:tc=vanilla:tc=ansi+erase:tc=ansi+local1:
! # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
# beware of screen size problems and memory relative cursor addressing.
ansi-mini|any ansi terminal with pessimistic assumptions:\
:am:xo:\
:co#80:li#24:tc=vanilla:tc=ansi+cup:tc=ansi+erase:
! # ansi-mtabs adds relative addressing and minimal tab support
ansi-mtabs|any ansi terminal with pessimistic assumptions:\
:it#8:\
:ta=^I:tc=ansi+local1:tc=ansi-mini:
***************
*** 478,489 ****
:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
# Procomm and some other ANSI emulations don't recognize all of the ANSI-
! # standard capabilities. This entry deletes :UP:, :RI:, :DO:, :LE:, and
! # <vpa>/<hpa> capabilities, forcing curses to use repetitions of :up:,
! # :nd:, :do: and :le:. Also deleted :IC: and :ic:, as QModem up to
# 5.03 doesn't recognize these. Finally, we delete :rp: and :sr:, which seem
# to confuse many emulators. On the other hand, we can count on these
programs
! # doing :ae:/:as:/:sa:. Older versions of this entry featured
# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
# ANSI.SYS influence.
# From: Eric S. Raymond <address@hidden> Oct 30 1995
--- 478,489 ----
:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
# Procomm and some other ANSI emulations don't recognize all of the ANSI-
! # standard capabilities. This entry deletes :UP:, :RI:, :DO:, :LE:, and
! # <vpa>/<hpa> capabilities, forcing curses to use repetitions of :up:,
! # :nd:, :do: and :le:. Also deleted :IC: and :ic:, as QModem up to
# 5.03 doesn't recognize these. Finally, we delete :rp: and :sr:, which seem
# to confuse many emulators. On the other hand, we can count on these
programs
! # doing :ae:/:as:/:sa:. Older versions of this entry featured
# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
# ANSI.SYS influence.
# From: Eric S. Raymond <address@hidden> Oct 30 1995
***************
*** 531,542 ****
:u6=\E[%i%d;%dR:u7=\E[6n:..u8=\E[?%[;0123456789]c:\
:u9=\E[c:tc=ecma+color:tc=klone+sgr:tc=ansi-m:
! # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
! # all the normal ANSI stuff with no extensions. It assumes
! # insert/delete line/char is there, so it won't work with
! # vt100 clones. It assumes video attributes for bold, blink,
! # underline, and reverse, which won't matter much if the terminal
! # can't do some of those. Padding is assumed to be zero, which
# shouldn't hurt since xon/xoff is assumed.
ansi-generic|generic ansi standard terminal:\
:am:xo:\
--- 531,542 ----
:u6=\E[%i%d;%dR:u7=\E[6n:..u8=\E[?%[;0123456789]c:\
:u9=\E[c:tc=ecma+color:tc=klone+sgr:tc=ansi-m:
! # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
! # all the normal ANSI stuff with no extensions. It assumes
! # insert/delete line/char is there, so it won't work with
! # vt100 clones. It assumes video attributes for bold, blink,
! # underline, and reverse, which won't matter much if the terminal
! # can't do some of those. Padding is assumed to be zero, which
# shouldn't hurt since xon/xoff is assumed.
ansi-generic|generic ansi standard terminal:\
:am:xo:\
***************
*** 853,866 ****
# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
# is broken. All the special key sequences are broken, making it unusable
# with Emacs. The problem stems from the following:
! #
# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
# keypad!), loadable fonts, and strange highlighting modes ("dithered"
# half-intensity, "smeared" bold, and real strike-out, for example.) It also
# uses resizable terminal windows, but the bundled terminal program always
# uses an 80x24 window (and doesn't support seem to support a 132-column
! # mode.)
! #
# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
# library which was a superset of SVr3.5 curses (called tam, for "terminal
# access method".) tam includes support for real, overlapping windows,
--- 853,866 ----
# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
# is broken. All the special key sequences are broken, making it unusable
# with Emacs. The problem stems from the following:
! #
# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
# keypad!), loadable fonts, and strange highlighting modes ("dithered"
# half-intensity, "smeared" bold, and real strike-out, for example.) It also
# uses resizable terminal windows, but the bundled terminal program always
# uses an 80x24 window (and doesn't support seem to support a 132-column
! # mode.)
! #
# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
# library which was a superset of SVr3.5 curses (called tam, for "terminal
# access method".) tam includes support for real, overlapping windows,
***************
*** 876,919 ****
# (If you're interested in adding some of the tam calls to ncurses, btw, I
# have the full documentation and several programs which use tam. It also
# used an extended terminfo format to describe key sequences, special
! # highlighting modes, etc.)
! #
# KEYS: This means that ncurses would quite painful on the UNIX PC, since
# there are two sequences for every key-modifier combination (local keyboard
# sequence and remote "VT100" sequence.) But I doubt many people are trying
# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
! # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
! # seem to have been built from the manual describing the VT100 sequences.
! # This means it doesn't work for a real live UNIX PC.
! #
# FONTS: The UNIX PC also has a strange interpretation of "alternate
# character set". Rather than the VT100 graphics you might expect, it allows
# up to 8 custom fonts to be loaded at any given time. This means that
# programs expecting VT100 graphics will usually be disappointed. For this
# reason I have disabled the smacs/rmacs sequences, but they could easily be
! # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
! # manpage), should you wish to do so:
! #
# SGR10 - Select font 0 - ESC [ 10 m or SO
# SGR11 - Select font 1 - ESC [ 11 m or SI
# SGR12 - Select font 2 - ESC [ 12 m
# ... (etc.)
# SGR17 - Select font 7 - ESC [ 17 m
! #
# Graphics for line drawing are not reliably found at *any* character
# location because the UNIX PC has dynamically reloadable fonts. I use font
# 0 for regular text and font 1 for italics, but this is by no means
# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
! #
# MISC: The cursor visible/cursor invisible sequences were swapped in the
# distributed terminfo.
! #
# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
# the UNIX PC terminfo entry. The modified version works great with Lynx,
# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
# attached by serial cable. In Emacs, even the Undo key works, and many
! # applications can now use the F1-F8 keys.
! #
# esr's notes:
# Terminfo entry for the AT&T Unix PC 7300
# from escape(7) in Unix PC 7300 Manual.
--- 876,919 ----
# (If you're interested in adding some of the tam calls to ncurses, btw, I
# have the full documentation and several programs which use tam. It also
# used an extended terminfo format to describe key sequences, special
! # highlighting modes, etc.)
! #
# KEYS: This means that ncurses would quite painful on the UNIX PC, since
# there are two sequences for every key-modifier combination (local keyboard
# sequence and remote "VT100" sequence.) But I doubt many people are trying
# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
! # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
! # seem to have been built from the manual describing the VT100 sequences.
! # This means it doesn't work for a real live UNIX PC.
! #
# FONTS: The UNIX PC also has a strange interpretation of "alternate
# character set". Rather than the VT100 graphics you might expect, it allows
# up to 8 custom fonts to be loaded at any given time. This means that
# programs expecting VT100 graphics will usually be disappointed. For this
# reason I have disabled the smacs/rmacs sequences, but they could easily be
! # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
! # manpage), should you wish to do so:
! #
# SGR10 - Select font 0 - ESC [ 10 m or SO
# SGR11 - Select font 1 - ESC [ 11 m or SI
# SGR12 - Select font 2 - ESC [ 12 m
# ... (etc.)
# SGR17 - Select font 7 - ESC [ 17 m
! #
# Graphics for line drawing are not reliably found at *any* character
# location because the UNIX PC has dynamically reloadable fonts. I use font
# 0 for regular text and font 1 for italics, but this is by no means
# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
! #
# MISC: The cursor visible/cursor invisible sequences were swapped in the
# distributed terminfo.
! #
# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
# the UNIX PC terminfo entry. The modified version works great with Lynx,
# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
# attached by serial cable. In Emacs, even the Undo key works, and many
! # applications can now use the F1-F8 keys.
! #
# esr's notes:
# Terminfo entry for the AT&T Unix PC 7300
# from escape(7) in Unix PC 7300 Manual.
***************
*** 928,935 ****
# * into font memory slot #1. Once the font has been loaded,
# * it can be used as an alternative character set.
# *
! # * The call to ioctl with the argument WIOCLFONT is the key
! # * to this routine. For more information, see window(7) in
# * the PC 7300 documentation.
# ***************************************************************/
# #include <string.h> /* needed for strcpy call */
--- 928,935 ----
# * into font memory slot #1. Once the font has been loaded,
# * it can be used as an alternative character set.
# *
! # * The call to ioctl with the argument WIOCLFONT is the key
! # * to this routine. For more information, see window(7) in
# * the PC 7300 documentation.
# ***************************************************************/
# #include <string.h> /* needed for strcpy call */
***************
*** 944,950 ****
# * cfont <filename>. For further information on fonts see
# * cfont(1) in the PC 7300 documentation.
# */
! #
# struct altfdata /* structure for alt font data */
# {
# short altf_slot; /* memory slot number */
--- 944,950 ----
# * cfont <filename>. For further information on fonts see
# * cfont(1) in the PC 7300 documentation.
# */
! #
# struct altfdata /* structure for alt font data */
# {
# short altf_slot; /* memory slot number */
***************
*** 1319,1325 ****
:km:\
:co#80:li#25:tc=vt220:
! # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
# DECstation/pmax.
rcons|BSD rasterconsole:\
:tc=sun-il:
--- 1319,1325 ----
:km:\
:co#80:li#25:tc=vt220:
! # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
# DECstation/pmax.
rcons|BSD rasterconsole:\
:tc=sun-il:
***************
*** 1442,1448 ****
#### 386BSD and BSD/OS Consoles
#
! # This was the original 386BSD console entry (I think).
# Some places it's named oldpc3|oldibmpc3.
# From: Alex R.N. Wetmore <address@hidden>
origpc3|origibmpc3|IBM PC 386BSD Console:\
--- 1442,1448 ----
#### 386BSD and BSD/OS Consoles
#
! # This was the original 386BSD console entry (I think).
# Some places it's named oldpc3|oldibmpc3.
# From: Alex R.N. Wetmore <address@hidden>
origpc3|origibmpc3|IBM PC 386BSD Console:\
***************
*** 1469,1475 ****
# are described here. This entry really ought to be upgraded.
# Also note, the console will also work with fewer lines after doing
# "stty rows NN", e.g. to use 24 lines.
! # (Color support from Kevin Rosenberg <address@hidden>, 2 May 1996)
# Bug: The <op> capability resets attributes.
bsdos-pc|IBM PC BSD/OS Console:\
:..sa=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m:\
--- 1469,1475 ----
# are described here. This entry really ought to be upgraded.
# Also note, the console will also work with fewer lines after doing
# "stty rows NN", e.g. to use 24 lines.
! # (Color support from Kevin Rosenberg <address@hidden>, 2 May 1996)
# Bug: The <op> capability resets attributes.
bsdos-pc|IBM PC BSD/OS Console:\
:..sa=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m:\
***************
*** 1489,1505 ****
:..sa=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;:\
:sc=\E7:sf=^J:ta=^I:up=\E[A:tc=klone+sgr:
! # Old names for BSD/OS PC console used in releases before 4.1.
pc3|BSD/OS on the PC Console:\
:tc=bsdos-pc-nobold:
ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline:\
:tc=bsdos-pc:
!
! # BSD/OS on the SPARC
bsdos-sparc|Sun SPARC BSD/OS Console:\
:tc=sun:
!
! # BSD/OS on the PowerPC
bsdos-ppc|PowerPC BSD/OS Console:\
:tc=bsdos-pc:
--- 1489,1505 ----
:..sa=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;:\
:sc=\E7:sf=^J:ta=^I:up=\E[A:tc=klone+sgr:
! # Old names for BSD/OS PC console used in releases before 4.1.
pc3|BSD/OS on the PC Console:\
:tc=bsdos-pc-nobold:
ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline:\
:tc=bsdos-pc:
!
! # BSD/OS on the SPARC
bsdos-sparc|Sun SPARC BSD/OS Console:\
:tc=sun:
!
! # BSD/OS on the PowerPC
bsdos-ppc|PowerPC BSD/OS Console:\
:tc=bsdos-pc:
***************
*** 1522,1528 ****
#
# Except where noted, these entries are DEC's official terminfos.
# Contact Bill Hedberg <address@hidden> of Terminal Support
! # Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
# In October 1995 DEC sold its terminals business, including the VT and Dorio
--- 1522,1528 ----
#
# Except where noted, these entries are DEC's official terminfos.
# Contact Bill Hedberg <address@hidden> of Terminal Support
! # Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
# In October 1995 DEC sold its terminals business, including the VT and Dorio
***************
*** 1543,1560 ****
# you output the char in column 80, immediately output CR LF
# and then assume you are in column 1 of the next line. If :xn:
# is on, am should be on too.
! #
# I assume you have smooth scroll off or are at a slow enough baud
# rate that it doesn't matter (1200? or less). Also this assumes
! # that you set auto-nl to "on", if you set it off use vt100-nam
# below.
! #
# The padding requirements listed here are guesses. It is strongly
# recommended that xon/xoff be enabled, as this is assumed here.
! #
! # The vt100 uses <rs2> and <rf> rather than :is:/:ct:/:st: because the
! # tab settings are in non-volatile memory and don't need to be
! # reset upon login. Also setting the number of columns glitches
# the screen annoyingly. You can type "reset" to get them set.
#
# The VT100 series terminals have cursor ("arrows") keys which can operate
--- 1543,1560 ----
# you output the char in column 80, immediately output CR LF
# and then assume you are in column 1 of the next line. If :xn:
# is on, am should be on too.
! #
# I assume you have smooth scroll off or are at a slow enough baud
# rate that it doesn't matter (1200? or less). Also this assumes
! # that you set auto-nl to "on", if you set it off use vt100-nam
# below.
! #
# The padding requirements listed here are guesses. It is strongly
# recommended that xon/xoff be enabled, as this is assumed here.
! #
! # The vt100 uses <rs2> and <rf> rather than :is:/:ct:/:st: because the
! # tab settings are in non-volatile memory and don't need to be
! # reset upon login. Also setting the number of columns glitches
# the screen annoyingly. You can type "reset" to get them set.
#
# The VT100 series terminals have cursor ("arrows") keys which can operate
***************
*** 1578,1584 ****
# The Numeric Keypad which can operate in two different modes: Numeric Mode
and
# Application Mode. Numeric Mode is the reset state, and is assumed to be
# the normal state. Application Mode is the "set" state. In Numeric Mode,
! # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
# Enter key transmits the same as the Return key (Note: the Return key
# can be configured to send either LF (\015) or CR LF). In Application Mode,
# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
--- 1578,1584 ----
# The Numeric Keypad which can operate in two different modes: Numeric Mode
and
# Application Mode. Numeric Mode is the reset state, and is assumed to be
# the normal state. Application Mode is the "set" state. In Numeric Mode,
! # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
# Enter key transmits the same as the Return key (Note: the Return key
# can be configured to send either LF (\015) or CR LF). In Application Mode,
# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
***************
*** 1622,1628 ****
#
# And here, for those of you with orphaned VT100s lacking documentation, is
# a description of the soft switches invoked when you do `Set Up'.
! #
# Scroll 0-Jump Shifted 3 0-#
# | 1-Smooth | 1-British pound sign
# | Autorepeat 0-Off | Wrap Around 0-Off
--- 1622,1628 ----
#
# And here, for those of you with orphaned VT100s lacking documentation, is
# a description of the soft switches invoked when you do `Set Up'.
! #
# Scroll 0-Jump Shifted 3 0-#
# | 1-Smooth | 1-British pound sign
# | Autorepeat 0-Off | Wrap Around 0-Off
***************
*** 1699,1705 ****
:ds=\E7\E[1;24r\E8:fs=\E8:ho=\E[2;1H:is=\E7\E[2;24r\E8:\
:ts=\E7\E[1;%dH\E[1K:tc=vt100-am:
! # Status line at bottom.
# Clearing the screen will clobber status line.
vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline:\
:es:hs:\
--- 1699,1705 ----
:ds=\E7\E[1;24r\E8:fs=\E8:ho=\E[2;1H:is=\E7\E[2;24r\E8:\
:ts=\E7\E[1;%dH\E[1K:tc=vt100-am:
! # Status line at bottom.
# Clearing the screen will clobber status line.
vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline:\
:es:hs:\
***************
*** 1709,1715 ****
# Most of the `vt100' emulators out there actually emulate a vt102
# This entry (or vt102-nsgr) is probably the right thing to use for
! # these.
vt102|dec vt102:\
:mi:\
:al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:tc=vt100:
--- 1709,1715 ----
# Most of the `vt100' emulators out there actually emulate a vt102
# This entry (or vt102-nsgr) is probably the right thing to use for
! # these.
vt102|dec vt102:\
:mi:\
:al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:tc=vt100:
***************
*** 1722,1728 ****
# string in the canonical vt100 entry above leaves the screen littered
# with little snowflake or star characters (IBM PC ROM character \017 = ^O)
# after highlight turnoffs. This entry should fix that, and even leave
! # ACS support working, at the cost of making multiple-highlight changes
# slightly more expensive.
# From: Eric S. Raymond <address@hidden> July 22 1995
vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes):\
--- 1722,1728 ----
# string in the canonical vt100 entry above leaves the screen littered
# with little snowflake or star characters (IBM PC ROM character \017 = ^O)
# after highlight turnoffs. This entry should fix that, and even leave
! # ACS support working, at the cost of making multiple-highlight changes
# slightly more expensive.
# From: Eric S. Raymond <address@hidden> July 22 1995
vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes):\
***************
*** 1749,1756 ****
# vt132 - like vt100 but slower and has ins/del line and such.
# I'm told that :im:/:ei: are backwards in the terminal from the
! # manual and from the ANSI standard, this describes the actual
! # terminal. I've never actually used a vt132 myself, so this
# is untested.
#
vt132|DEC vt132:\
--- 1749,1756 ----
# vt132 - like vt100 but slower and has ins/del line and such.
# I'm told that :im:/:ei: are backwards in the terminal from the
! # manual and from the ANSI standard, this describes the actual
! # terminal. I've never actually used a vt132 myself, so this
# is untested.
#
vt132|DEC vt132:\
***************
*** 1839,1845 ****
# at the top of the keyboard. This mapping follows the description given
# in the VT220 Programmer Reference Manual and agrees with the labeling
# on some terminals that emulate the vt220. There is no support for an F5.
! # See vt220 for an alternate mapping.
#
vt220d|DEC VT220 in vt100 mode with DEC function key labeling:\
:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
--- 1839,1845 ----
# at the top of the keyboard. This mapping follows the description given
# in the VT220 Programmer Reference Manual and agrees with the labeling
# on some terminals that emulate the vt220. There is no support for an F5.
! # See vt220 for an alternate mapping.
#
vt220d|DEC VT220 in vt100 mode with DEC function key labeling:\
:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
***************
*** 1878,1885 ****
:nw=^M\ED:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\
:rf=/usr/lib/tabset/vt100:sc=\E7:se=5\E[27m:sf=\ED:\
:so=5\E[7m:sr=\EM:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
!
! # This was DEC's vt320. Use the purpose-built one below instead
#vt320|DEC VT320 in vt100 emulation mode,
# use=vt220,
--- 1878,1885 ----
:nw=^M\ED:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\
:rf=/usr/lib/tabset/vt100:sc=\E7:se=5\E[27m:sf=\ED:\
:so=5\E[7m:sr=\EM:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
!
! # This was DEC's vt320. Use the purpose-built one below instead
#vt320|DEC VT320 in vt100 emulation mode,
# use=vt220,
***************
*** 1890,1898 ****
:am@:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220:
! # These entries are not DEC's official ones, they were purpose-built for the
# VT320. Here are the designer's notes:
! # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
# khome is Home on a PC kbd. Actually 'FIND' on a VT.
# Things that use <knxt> usually use tab anyways... and things that don't use
--- 1890,1898 ----
:am@:\
:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220:
! # These entries are not DEC's official ones, they were purpose-built for the
# VT320. Here are the designer's notes:
! # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
# khome is Home on a PC kbd. Actually 'FIND' on a VT.
# Things that use <knxt> usually use tab anyways... and things that don't use
***************
*** 1902,1908 ****
# and the resulting fact that it causes the termcap translation of the entry
# to SMASH the 1k-barrier...
# From: Adam Thompson <address@hidden> Sept 10 1995
! # (vt320: uncommented :fs: --esr)
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
--- 1902,1908 ----
# and the resulting fact that it causes the termcap translation of the entry
# to SMASH the 1k-barrier...
# From: Adam Thompson <address@hidden> Sept 10 1995
! # (vt320: uncommented :fs: --esr)
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
***************
*** 1957,1963 ****
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
! # arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap or terminfo entry,
#
# From: Daniel Glasser <address@hidden>, 13 Oct 1993
--- 1957,1963 ----
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
! # arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap or terminfo entry,
#
# From: Daniel Glasser <address@hidden>, 13 Oct 1993
***************
*** 1985,1992 ****
# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
! #
! # VT400/420 -- This terminal is a superset of the vt320. It adds the
multiple
# text pages and long text pages with selectable length of the vt340, along
# with left and right margins, rectangular area text copy, fill, and erase
# operations, selected region character attribute change operations,
--- 1985,1992 ----
# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
! #
! # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
# text pages and long text pages with selectable length of the vt340, along
# with left and right margins, rectangular area text copy, fill, and erase
# operations, selected region character attribute change operations,
***************
*** 1998,2004 ****
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
! # arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap entry,
#
# From: Daniel Glasser <address@hidden>, 13 Oct 1993
--- 1998,2004 ----
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
! # arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap entry,
#
# From: Daniel Glasser <address@hidden>, 13 Oct 1993
***************
*** 2055,2067 ****
# emulators define these):
#
# if (key < 16) then value = key;
! # else if (key < 21) then value = key + 1;
# else if (key < 25) then value = key + 2;
# else if (key < 27) then value = key + 3;
# else if (key < 30) then value = key + 4;
# else value = key + 5;
#
! # The string must be the hexadecimal equivalent, e.g., "5052494E" for
"PRINT".
# There's no provision in terminfo for emitting a string in this format, so
the
# application has to know it.
#
--- 2055,2067 ----
# emulators define these):
#
# if (key < 16) then value = key;
! # else if (key < 21) then value = key + 1;
# else if (key < 25) then value = key + 2;
# else if (key < 27) then value = key + 3;
# else if (key < 30) then value = key + 4;
# else value = key + 5;
#
! # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
# There's no provision in terminfo for emitting a string in this format, so
the
# application has to know it.
#
***************
*** 2352,2358 ****
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:me=\E[m:\
:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
! # Compatible with the R5 xterm
# (from the XFree86 3.2 distribution, <blink=@> removed)
# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
# corrected typos in rs2 string - TD
--- 2352,2358 ----
:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:me=\E[m:\
:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
! # Compatible with the R5 xterm
# (from the XFree86 3.2 distribution, <blink=@> removed)
# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
# corrected typos in rs2 string - TD
***************
*** 2581,2587 ****
# 12-fkey keyboard can support vt220's 20-fkeys.
# + maps numeric keypad "+" to ",".
# + uses DEC-style control sequences for the application keypad.
! #
xterm-vt220|XFree86 xterm emulating vt220:\
:@1=\EOu:@7=\E[4~:@8=\EOM:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:\
--- 2581,2587 ----
# 12-fkey keyboard can support vt220's 20-fkeys.
# + maps numeric keypad "+" to ",".
# + uses DEC-style control sequences for the application keypad.
! #
xterm-vt220|XFree86 xterm emulating vt220:\
:@1=\EOu:@7=\E[4~:@8=\EOM:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:\
***************
*** 2608,2617 ****
# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System):\
:tc=xterm-r6:
! # use=xterm-xfree86,
! # These entries allow access to the X titlebar and icon name as a status
line.
! # Note that twm (and possibly window managers descended from it such as
tvtwm,
# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
# with it.
xterm+sl|access X title line and icon name:\
--- 2608,2617 ----
# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System):\
:tc=xterm-r6:
! # use=xterm-xfree86,
! # These entries allow access to the X titlebar and icon name as a status line.
! # Note that twm (and possibly window managers descended from it such as tvtwm,
# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
# with it.
xterm+sl|access X title line and icon name:\
***************
*** 2646,2652 ****
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs:\
:IC@:ei=:ic@:im=:tc=xterm:
! # From: Mark Sheppard <address@hidden>, 4 May 1996
xterm1|xterm terminal emulator ignoring the alternate screen buffer:\
:te@:ti@:tc=xterm:
--- 2646,2652 ----
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs:\
:IC@:ei=:ic@:im=:tc=xterm:
! # From: Mark Sheppard <address@hidden>, 4 May 1996
xterm1|xterm terminal emulator ignoring the alternate screen buffer:\
:te@:ti@:tc=xterm:
***************
*** 2809,2815 ****
#
# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
# Since rxvt is not really compatible with xterm, it should be configured as
! # "rxvt" (monochrome) and "rxvt-color".
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
--- 2809,2815 ----
#
# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
# Since rxvt is not really compatible with xterm, it should be configured as
! # "rxvt" (monochrome) and "rxvt-color".
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
***************
*** 2927,2933 ****
# via the X resource setting "xterm*sunFunctionKeys:true"
# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
! # because we want it to be seen as <kcpy>.
# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
# with their Sun keyboard labels instead.
# From: Simon J. Gerraty <address@hidden> 10 Jan 1996
--- 2927,2933 ----
# via the X resource setting "xterm*sunFunctionKeys:true"
# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
! # because we want it to be seen as <kcpy>.
# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
# with their Sun keyboard labels instead.
# From: Simon J. Gerraty <address@hidden> 10 Jan 1996
***************
*** 2967,2974 ****
#### MGR
#
# MGR is a Bell Labs window system lighter-weight than X.
! # These entries describe MGR's xterm-equivalent.
! # They are courtesy of Vincent Broman <address@hidden> 14 Jan 1997
#
mgr|Bellcore MGR (non X) window system terminal emulation:\
--- 2967,2974 ----
#### MGR
#
# MGR is a Bell Labs window system lighter-weight than X.
! # These entries describe MGR's xterm-equivalent.
! # They are courtesy of Vincent Broman <address@hidden> 14 Jan 1997
#
mgr|Bellcore MGR (non X) window system terminal emulation:\
***************
*** 2997,3004 ****
######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
#
! # Columbus UNIX virtual terminal. This terminal also appears in
! # UNIX 4.0 and successors as line discipline 1 (?), but is
# undocumented and does not really work quite right.
cbunix|cb unix virtual terminal:\
:am:bs:da:db:\
--- 2997,3004 ----
######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
#
! # Columbus UNIX virtual terminal. This terminal also appears in
! # UNIX 4.0 and successors as line discipline 1 (?), but is
# undocumented and does not really work quite right.
cbunix|cb unix virtual terminal:\
:am:bs:da:db:\
***************
*** 3015,3021 ****
pty|4bsd pseudo teletype:\
:cm=\EG%+ %+ :se=\Eb$:so=\Ea$:ue=\Eb!:us=\Ea!:tc=cbunix:
! # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
eterm|gnu emacs term.el terminal emulation:\
:am:mi:xn:\
:co#80:li#24:\
--- 3015,3021 ----
pty|4bsd pseudo teletype:\
:cm=\EG%+ %+ :se=\Eb$:so=\Ea$:ue=\Eb!:us=\Ea!:tc=cbunix:
! # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
eterm|gnu emacs term.el terminal emulation:\
:am:mi:xn:\
:co#80:li#24:\
***************
*** 3027,3033 ****
:sf=^J:so=\E[7m:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\
:ue=\E[m:up=\E[A:us=\E[4m:
! # Entries for use by the `screen' program by Juergen Weigert,
# Michael Schroeder, Oliver Laumann. The screen and
# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
# come from University of Wisconsin and may be older.
--- 3027,3033 ----
:sf=^J:so=\E[7m:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\
:ue=\E[m:up=\E[A:us=\E[4m:
! # Entries for use by the `screen' program by Juergen Weigert,
# Michael Schroeder, Oliver Laumann. The screen and
# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
# come from University of Wisconsin and may be older.
***************
*** 3338,3345 ****
# (wsiris: this had extension capabilities
# :HS=\E7F2:HE=\E7F7:\
# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
! # See the note on Iris extensions near the end of this file.
! # Finally, removed suboptimal :cl:=\EH\EJ and added :do: &
# :vb: from BRL -- esr)
wsiris|iris40|iris emulating a 40 line visual 50 (approximately):\
:am:bs:nc:pt:\
--- 3338,3345 ----
# (wsiris: this had extension capabilities
# :HS=\E7F2:HE=\E7F7:\
# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
! # See the note on Iris extensions near the end of this file.
! # Finally, removed suboptimal :cl:=\EH\EJ and added :do: &
# :vb: from BRL -- esr)
wsiris|iris40|iris emulating a 40 line visual 50 (approximately):\
:am:bs:nc:pt:\
***************
*** 3453,3459 ****
news-42-sjis:\
:tc=news-42:
#
! # NEWS-OS old termcap entry
#
# (news-old-unk: this had :KB=news:TY=sjis: --esr)
news-old-unk|SONY NEWS vt100 emulator common entry:\
--- 3453,3459 ----
news-42-sjis:\
:tc=news-42:
#
! # NEWS-OS old termcap entry
#
# (news-old-unk: this had :KB=news:TY=sjis: --esr)
news-old-unk|SONY NEWS vt100 emulator common entry:\
***************
*** 3684,3690 ****
# but the termcap entry is actually broken and unusable as given; the :do:
# capability is misspelled "d".
#
! # To use this, you need to a bunch of environment variables:
#
# SET _POSIX_TERM=on
# SET TERM=ansi
--- 3684,3690 ----
# but the termcap entry is actually broken and unusable as given; the :do:
# capability is misspelled "d".
#
! # To use this, you need to a bunch of environment variables:
#
# SET _POSIX_TERM=on
# SET TERM=ansi
***************
*** 3696,3702 ****
# Important note: setting the TMP environment variable in POSIX style renders
# it incompatible with a lot of other applications, including Visual C++. So
# you should have a separate command window just for vi. All the other
! # variables may be permanently set in the Control Panel\System applet.
#
# You can find out more about the restrictions of this facility at
# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
--- 3696,3702 ----
# Important note: setting the TMP environment variable in POSIX style renders
# it incompatible with a lot of other applications, including Visual C++. So
# you should have a separate command window just for vi. All the other
! # variables may be permanently set in the Control Panel\System applet.
#
# You can find out more about the restrictions of this facility at
# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
***************
*** 3813,3826 ****
#### Hewlett-Packard (hp)
#
# Hewlett-Packard
! # 8000 Foothills Blvd
# Roseville, CA 95747
# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
# 1-(800)-633-3600 (General customer support)
#
#
# As of March 1998, HP no longer has any terminals in production.
! # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
# supported (they still have parts). So are the 2392a and 2394a.
# See the WORKSTATION CONSOLES section for the 700s.
#
--- 3813,3826 ----
#### Hewlett-Packard (hp)
#
# Hewlett-Packard
! # 8000 Foothills Blvd
# Roseville, CA 95747
# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
# 1-(800)-633-3600 (General customer support)
#
#
# As of March 1998, HP no longer has any terminals in production.
! # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
# supported (they still have parts). So are the 2392a and 2394a.
# See the WORKSTATION CONSOLES section for the 700s.
#
***************
*** 3845,3853 ****
hp+pfk-cr|hp function keys w/o CR:\
:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:
! # The hp2621s use the same keys for the arrows and function keys,
! # but not separate escape sequences. These definitions allow the
! # user to use those keys as arrow keys rather than as function
# keys.
hp+pfk+arrows|hp alternate arrow definitions:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:kF=\Er\r:kH=\Eq\r:kR=\Es\r:\
--- 3845,3853 ----
hp+pfk-cr|hp function keys w/o CR:\
:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:
! # The hp2621s use the same keys for the arrows and function keys,
! # but not separate escape sequences. These definitions allow the
! # user to use those keys as arrow keys rather than as function
# keys.
hp+pfk+arrows|hp alternate arrow definitions:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:kF=\Er\r:kH=\Eq\r:kR=\Es\r:\
***************
*** 3871,3886 ****
# Due to severe 2621 braindamage, the only way to get the arrow keys to
# transmit anything at all is to turn on the function key labels
# with :ks:, and even then the user has to hold down shift!
! # The default 2621 turns off the labels except when it has to to
! # enable the function keys. If your installation prefers labels
! # on all the time, or off all the time (at the "expense" of the
# function keys), use 2621-nl or 2621-wl.
! #
! # Note: there are newer ROMs for 2621's that allow you to set
! # strap A so the regular arrow keys xmit \EA, etc, as with the
! # 2645. However, even with this strap set, the terminal stops
# xmitting if you reset it, until you unset and reset the strap!
! # Since there is no way to set/unset the strap with an escape
# sequence, we don't use it in the default.
# If you like, you can use 2621-ba (brain-damaged arrow keys).
hp2621-ba|2621 w/new rom and strap A set:\
--- 3871,3886 ----
# Due to severe 2621 braindamage, the only way to get the arrow keys to
# transmit anything at all is to turn on the function key labels
# with :ks:, and even then the user has to hold down shift!
! # The default 2621 turns off the labels except when it has to to
! # enable the function keys. If your installation prefers labels
! # on all the time, or off all the time (at the "expense" of the
# function keys), use 2621-nl or 2621-wl.
! #
! # Note: there are newer ROMs for 2621's that allow you to set
! # strap A so the regular arrow keys xmit \EA, etc, as with the
! # 2645. However, even with this strap set, the terminal stops
# xmitting if you reset it, until you unset and reset the strap!
! # Since there is no way to set/unset the strap with an escape
# sequence, we don't use it in the default.
# If you like, you can use 2621-ba (brain-damaged arrow keys).
hp2621-ba|2621 w/new rom and strap A set:\
***************
*** 3910,3916 ****
:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:\
:ku=\EA:tc=hp2621:
! # 2621 using all 48 lines of memory, only 24 visible at any time.
hp2621-48|48 line 2621:\
:li#48:\
:cm=\E&a%r%dc%dR:cv=\E&a%dR:ho=\EH:tc=hp2621:
--- 3910,3916 ----
:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:\
:ku=\EA:tc=hp2621:
! # 2621 using all 48 lines of memory, only 24 visible at any time.
hp2621-48|48 line 2621:\
:li#48:\
:cm=\E&a%r%dc%dR:cv=\E&a%dR:ho=\EH:tc=hp2621:
***************
*** 3919,3956 ****
hp2621-nl|hp 2621 with no labels:\
:kd@:ke@:kh@:kl@:kr@:ks@:ku@:tc=hp2621-fl:
! # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
# (wrong).
#
hp2621-nt|hp 2621 w/no tabs:\
:ta@:tc=hp2621:
# Hp 2624 B with 4 or 10 pages of memory.
! #
! # Some assumptions are made with this entry. These settings are
# NOT set up by the initialization strings.
! #
# Port Configuration
# RecvPace=Xon/Xoff
# XmitPace=Xon/Xoff
# StripNulDel=Yes
! #
# Terminal Configuration
# InhHndShk=Yes
# InhDC2=Yes
# XmitFnctn(A)=No
# InhEolWrp=No
! #
# Note: the 2624 DOES have a true :ho:, believe it or not!
! #
! # The 2624 has an "error line" to which messages can be sent.
# This is CLOSE to what is expected for a "status line". However,
! # after a message is sent to the "error line", the next carriage
! # return is EATEN and the "error line" is turned back off again!
# So I guess we can't define :hs:, :es:, :ws:, :ds:, :fs:, :ts:.
! #
! # This entry supports emacs (and any other program that uses raw
! # mode) at 4800 baud and less. I couldn't get the padding right
# for 9600.
#
# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
--- 3919,3956 ----
hp2621-nl|hp 2621 with no labels:\
:kd@:ke@:kh@:kl@:kr@:ks@:ku@:tc=hp2621-fl:
! # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
# (wrong).
#
hp2621-nt|hp 2621 w/no tabs:\
:ta@:tc=hp2621:
# Hp 2624 B with 4 or 10 pages of memory.
! #
! # Some assumptions are made with this entry. These settings are
# NOT set up by the initialization strings.
! #
# Port Configuration
# RecvPace=Xon/Xoff
# XmitPace=Xon/Xoff
# StripNulDel=Yes
! #
# Terminal Configuration
# InhHndShk=Yes
# InhDC2=Yes
# XmitFnctn(A)=No
# InhEolWrp=No
! #
# Note: the 2624 DOES have a true :ho:, believe it or not!
! #
! # The 2624 has an "error line" to which messages can be sent.
# This is CLOSE to what is expected for a "status line". However,
! # after a message is sent to the "error line", the next carriage
! # return is EATEN and the "error line" is turned back off again!
# So I guess we can't define :hs:, :es:, :ws:, :ds:, :fs:, :ts:.
! #
! # This entry supports emacs (and any other program that uses raw
! # mode) at 4800 baud and less. I couldn't get the padding right
# for 9600.
#
# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
***************
*** 3959,3979 ****
:lm#96:\
:vb=\E&w13F\E&w12F\E&w13F\E&w12F:tc=hp+labels:tc=scrhp:
! # This hp2626 entry does not use any of the fancy windowing stuff
# of the 2626.
! #
! # Indeed, terminfo does not yet handle such stuff. Since changing
! # any window clears memory, it is probably not possible to use
# this for screen opt.
! #
! # ed is incredibly slow most of the time - I am guessing at the
! # exact padding. Since the terminal uses xoff/xon this is intended
! # only for cost computation, so that the terminal will prefer el
# or even dl1 which is probably faster!
! #
! # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
! # extra slow on the last line of the window.
! #
# The padding probably should be changed.
#
hp2626|hp2626a|hp2626p|hp 2626:\
--- 3959,3979 ----
:lm#96:\
:vb=\E&w13F\E&w12F\E&w13F\E&w12F:tc=hp+labels:tc=scrhp:
! # This hp2626 entry does not use any of the fancy windowing stuff
# of the 2626.
! #
! # Indeed, terminfo does not yet handle such stuff. Since changing
! # any window clears memory, it is probably not possible to use
# this for screen opt.
! #
! # ed is incredibly slow most of the time - I am guessing at the
! # exact padding. Since the terminal uses xoff/xon this is intended
! # only for cost computation, so that the terminal will prefer el
# or even dl1 which is probably faster!
! #
! # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
! # extra slow on the last line of the window.
! #
# The padding probably should be changed.
#
hp2626|hp2626a|hp2626p|hp 2626:\
***************
*** 3982,3991 ****
:SF=\E&r%dD:SR=\E&r%dU:cd=\ED\EJ\EC:ip=:is=\E&address@hidden:\
:tc=hp+pfk+cr:tc=hp+labels:tc=scrhp:
! # This entry is for sysline. It allocates a 23 line window with
! # a 115 line workspace for regular use, and a 1 line window for
# the status line.
! #
# This assumes port 2 is being used.
# Turn off horizontal line, Create ws #1 with 115 lines,
# Create ws #2 with 1 line, Create window #1 lines 1-23,
--- 3982,3991 ----
:SF=\E&r%dD:SR=\E&r%dU:cd=\ED\EJ\EC:ip=:is=\E&address@hidden:\
:tc=hp+pfk+cr:tc=hp+labels:tc=scrhp:
! # This entry is for sysline. It allocates a 23 line window with
! # a 115 line workspace for regular use, and a 1 line window for
# the status line.
! #
# This assumes port 2 is being used.
# Turn off horizontal line, Create ws #1 with 115 lines,
# Create ws #2 with 1 line, Create window #1 lines 1-23,
***************
*** 4031,4037 ****
:is=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&address@hidden:\
:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=hp2627a:
! # hp2640a doesn't have the Y cursor addressing feature, and C is
# memory relative instead of screen relative, as we need.
#
hp2640a|hp 2640a:\
--- 4031,4037 ----
:is=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&address@hidden:\
:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=hp2627a:
! # hp2640a doesn't have the Y cursor addressing feature, and C is
# memory relative instead of screen relative, as we need.
#
hp2640a|hp 2640a:\
***************
*** 4066,4079 ****
hp2648|hp2648a|HP 2648a graphics terminal:\
:cl=\EH\EJ:cm=\E&a%r%dc%dY:dc=\EP:ip=:tc=hp2645:
! # The HP 150 terminal is a fairly vanilla HP terminal, with the
! # clreol standout problem. It also has graphics capabilities and
# a touch screen, which we don't describe here.
hp150|hewlett packard Model 150:\
:bs:tc=hp2622:
! # HP 2382a terminals, "the little ones." They don't have any
! # alternate character set support and sending out ^N/^O will
# leave the screen blank.
hp2382a|hp2382|hewlett packard 2382a:\
:da:db:\
--- 4066,4079 ----
hp2648|hp2648a|HP 2648a graphics terminal:\
:cl=\EH\EJ:cm=\E&a%r%dc%dY:dc=\EP:ip=:tc=hp2645:
! # The HP 150 terminal is a fairly vanilla HP terminal, with the
! # clreol standout problem. It also has graphics capabilities and
# a touch screen, which we don't describe here.
hp150|hewlett packard Model 150:\
:bs:tc=hp2622:
! # HP 2382a terminals, "the little ones." They don't have any
! # alternate character set support and sending out ^N/^O will
# leave the screen blank.
hp2382a|hp2382|hewlett packard 2382a:\
:da:db:\
***************
*** 4132,4139 ****
# The new hp2621b is kind of a cross between the old 2621 and the
! # new 262x series of machines. It has dip-switched options.
! # The firmware has a bug in it such that if you give it a null
# length label, the following character is eaten!
hp2621b|hp 2621b with old style keyboard:\
:Nl#8:lh#1:lm#48:lw#8:\
--- 4132,4139 ----
# The new hp2621b is kind of a cross between the old 2621 and the
! # new 262x series of machines. It has dip-switched options.
! # The firmware has a bug in it such that if you give it a null
# length label, the following character is eaten!
hp2621b|hp 2621b with old style keyboard:\
:Nl#8:lh#1:lm#48:lw#8:\
***************
*** 4155,4169 ****
# Some assumptions are made in the following entries.
# These settings are NOT set up by the initialization strings.
! #
# Port Configuration
# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
! #
# Terminal Configuration
# InhHndShk(G)=Yes InhDC2(H)=Yes
# XmitFnctn(A)=No InhEolWrp=No
#
! #
# Hp 2622a & hp2623a display and graphics terminals
#
hp2622|hp2622a|hp 2622:\
--- 4155,4169 ----
# Some assumptions are made in the following entries.
# These settings are NOT set up by the initialization strings.
! #
# Port Configuration
# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
! #
# Terminal Configuration
# InhHndShk(G)=Yes InhDC2(H)=Yes
# XmitFnctn(A)=No InhEolWrp=No
#
! #
# Hp 2622a & hp2623a display and graphics terminals
#
hp2622|hp2622a|hp 2622:\
***************
*** 4197,4203 ****
hp2397a|hp2397|hewlett packard 2397A color terminal:\
:is=\E&w6f80X:tc=memhp:tc=hp+labels:tc=hp+color:
! # HP 700/44 Setup parameters:
# Terminal Mode HP-PCterm
# Inhibit Auto Wrap NO
# Status Line Host Writable
--- 4197,4203 ----
hp2397a|hp2397|hewlett packard 2397A color terminal:\
:is=\E&w6f80X:tc=memhp:tc=hp+labels:tc=hp+color:
! # HP 700/44 Setup parameters:
# Terminal Mode HP-PCterm
# Inhibit Auto Wrap NO
# Status Line Host Writable
***************
*** 4207,4213 ****
# Keycode Mode NO or YES (sc)
# Backspace Key BS or BS/DEL
#
! # :is: sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
# \E\\? does not turn off keycode mode
# <smsc> sets alternate start/stop; keycode on
hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode:\
--- 4207,4213 ----
# Keycode Mode NO or YES (sc)
# Backspace Key BS or BS/DEL
#
! # :is: sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
# \E\\? does not turn off keycode mode
# <smsc> sets alternate start/stop; keycode on
hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode:\
***************
*** 4246,4255 ****
# hpex:
# May be used for most 24 x 80 hp terminals,
! # but has no padding added, so may allow runover in some terminals at high
! # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
! # hp98x5 terminal emulators or hp98x6 consoles.
! # Adds xy-cursor addressing, vertical cursor addressing, home,
# last line, and underline capabilities.
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
--- 4246,4255 ----
# hpex:
# May be used for most 24 x 80 hp terminals,
! # but has no padding added, so may allow runover in some terminals at high
! # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
! # hp98x5 terminal emulators or hp98x6 consoles.
! # Adds xy-cursor addressing, vertical cursor addressing, home,
# last line, and underline capabilities.
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
***************
*** 4410,4416 ****
# emulations (usually their stupidest, and usually labeled adm3, though
# these `adm3' emulations normally have adm3a+ capabilities).
#
! # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
# was being held to ground would trigger a send of the top line on the screen.
# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
--- 4410,4416 ----
# emulations (usually their stupidest, and usually labeled adm3, though
# these `adm3' emulations normally have adm3a+ capabilities).
#
! # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
# was being held to ground would trigger a send of the top line on the screen.
# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
***************
*** 4483,4497 ****
# Supervisor mode info by Ari Wuolle, <address@hidden>, 27 Aug 1996
# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
# :is:=\Eq but that looked wrong; this :is: is from Dave Yost <esquire!yost>
! # via BRL. That entry asserted :sg#1:, but I've left that out because
# neither earlier nor later ADMSs have it -- esr)
#
# You will need to get into the supervisor setup before you can set
# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
# see a lot more setup options.
! #
# While in supervisor setup you can also use following codes:
! #
# Ctrl-P Personality character selections (configure for example what
# arrow keys send, if I recall correctly)
# Ctrl-T tabs 1-80 use left&right to move and up to set and
--- 4483,4497 ----
# Supervisor mode info by Ari Wuolle, <address@hidden>, 27 Aug 1996
# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
# :is:=\Eq but that looked wrong; this :is: is from Dave Yost <esquire!yost>
! # via BRL. That entry asserted :sg#1:, but I've left that out because
# neither earlier nor later ADMSs have it -- esr)
#
# You will need to get into the supervisor setup before you can set
# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
# see a lot more setup options.
! #
# While in supervisor setup you can also use following codes:
! #
# Ctrl-P Personality character selections (configure for example what
# arrow keys send, if I recall correctly)
# Ctrl-T tabs 1-80 use left&right to move and up to set and
***************
*** 4504,4518 ****
# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
# Ctrl-R Reads both setup and functions keys from NVM.
# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
! #
# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
# RTS/CTS used nowadays with virtually every modem and computer. 19200
# bps works fine with hardware flow control.
! #
# The following null-modem cable should fix this and enable you to use
# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
# set ADM-12+ for DTR handshaking from supervisor setup.
! #
# PC Serial ADM-12+
# -------- -------
# 2 - 3
--- 4504,4518 ----
# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
# Ctrl-R Reads both setup and functions keys from NVM.
# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
! #
# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
# RTS/CTS used nowadays with virtually every modem and computer. 19200
# bps works fine with hardware flow control.
! #
# The following null-modem cable should fix this and enable you to use
# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
# set ADM-12+ for DTR handshaking from supervisor setup.
! #
# PC Serial ADM-12+
# -------- -------
# 2 - 3
***************
*** 4578,4584 ****
# + +
# +-+ +-+
# + +
! # + S5 S6 S7 +
# + == == == +
# +----------------------------------------------+
# front of case (keyboard)
--- 4578,4584 ----
# + +
# +-+ +-+
# + +
! # + S5 S6 S7 +
# + == == == +
# +----------------------------------------------+
# front of case (keyboard)
***************
*** 4726,4733 ****
:cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:im=\Eq:ip=:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:pc=\177:sf=^J:ta=^I:ue@:\
:up=^K:us@:vs=\EC\E3 \E3(:tc=adm+sgr:
! # The following termcap for the Lear Siegler ADM-42 leaves the
! # "system line" at the bottom of the screen blank (for those who
# find it distracting otherwise)
adm42-ns|lsi adm-42 with no system line:\
:al=\EE\EF \011:bt=\EI\EF \011:cd=\EY\EF \011:\
--- 4726,4733 ----
:cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:im=\Eq:ip=:kd=^J:kh=^^:\
:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:pc=\177:sf=^J:ta=^I:ue@:\
:up=^K:us@:vs=\EC\E3 \E3(:tc=adm+sgr:
! # The following termcap for the Lear Siegler ADM-42 leaves the
! # "system line" at the bottom of the screen blank (for those who
# find it distracting otherwise)
adm42-ns|lsi adm-42 with no system line:\
:al=\EE\EF \011:bt=\EI\EF \011:cd=\EY\EF \011:\
***************
*** 4816,4826 ****
:sg#1:tc=qvt101+:
# This used to have :vs=\E.2: but no :ve: or :vi:. The BSD termcap
! # file had :vs=\EM4 \200\200\200:. I've done the safe thing and yanked
# both. The :mr: is from BSD, which also claimed bold=\E( and dim=\E).
# What seems to be going on here is that this entry was designed so that
# the normal highlight is bold and standout is dim plus something else
! # (reverse-video maybe? But then, are there two :mr: sequences?)
qvt101+|qvt101p|qume qvt 101 PLUS product:\
:am:bw:hs:ul:\
:co#80:li#24:sg#0:\
--- 4816,4826 ----
:sg#1:tc=qvt101+:
# This used to have :vs=\E.2: but no :ve: or :vi:. The BSD termcap
! # file had :vs=\EM4 \200\200\200:. I've done the safe thing and yanked
# both. The :mr: is from BSD, which also claimed bold=\E( and dim=\E).
# What seems to be going on here is that this entry was designed so that
# the normal highlight is bold and standout is dim plus something else
! # (reverse-video maybe? But then, are there two :mr: sequences?)
qvt101+|qvt101p|qume qvt 101 PLUS product:\
:am:bw:hs:ul:\
:co#80:li#24:sg#0:\
***************
*** 4911,4917 ****
# Vanilla tvi910 -- W. Gish <address@hidden> 10/29/86
# Switch settings are:
! #
# S1 1 2 3 4
# D D D D 9600
# D D D U 50
--- 4911,4917 ----
# Vanilla tvi910 -- W. Gish <address@hidden> 10/29/86
# Switch settings are:
! #
# S1 1 2 3 4
# D D D D 9600
# D D D U 50
***************
*** 4929,4935 ****
# U U D U 7200
# U U U D 9600
# U U U U 19200
! #
# S1 5 6 7 8
# U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
# U D X U 7N2
--- 4929,4935 ----
# U U D U 7200
# U U U D 9600
# U U U U 19200
! #
# S1 5 6 7 8
# U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
# U D X U 7N2
***************
*** 4941,4991 ****
# D D X U 8N2
# D U D D 8O1
# D U U U 8E2
! #
# S1 9 Autowrap
# U on
# D off
! #
# S1 10 CR/LF
# U do CR/LF when CR received
# D do CR when CR received
! #
# S2 1 Mode
# U block
# D conversational
! #
# S2 2 Duplex
# U half
# D full
! #
# S2 3 Hertz
# U 50
# D 60
! #
# S2 4 Edit mode
# U local
# D duplex
! #
# S2 5 Cursor type
# U underline
# D block
! #
# S2 6 Cursor down key
# U send ^J
# D send ^V
! #
# S2 7 Screen colour
# U green on black
# D black on green
! #
# S2 8 DSR status (pin 6)
# U disconnected
# D connected
! #
# S2 9 DCD status (pin 8)
# U disconnected
# D duplex
! #
# S2 10 DTR status (pin 20)
# U disconnected
# D duplex
--- 4941,4991 ----
# D D X U 8N2
# D U D D 8O1
# D U U U 8E2
! #
# S1 9 Autowrap
# U on
# D off
! #
# S1 10 CR/LF
# U do CR/LF when CR received
# D do CR when CR received
! #
# S2 1 Mode
# U block
# D conversational
! #
# S2 2 Duplex
# U half
# D full
! #
# S2 3 Hertz
# U 50
# D 60
! #
# S2 4 Edit mode
# U local
# D duplex
! #
# S2 5 Cursor type
# U underline
# D block
! #
# S2 6 Cursor down key
# U send ^J
# D send ^V
! #
# S2 7 Screen colour
# U green on black
# D black on green
! #
# S2 8 DSR status (pin 6)
# U disconnected
# D connected
! #
# S2 9 DCD status (pin 8)
# U disconnected
# D duplex
! #
# S2 10 DTR status (pin 20)
# U disconnected
# D duplex
***************
*** 5016,5022 ****
# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
# D U D D 8O1 D U U U 8E2
! #
# S1 9 Autowrap (U = on, D = off)
# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
# S2 1 Mode (U = block, D = conversational)
--- 5016,5022 ----
# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
# D U D D 8O1 D U U U 8E2
! #
# S1 9 Autowrap (U = on, D = off)
# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
# S2 1 Mode (U = block, D = conversational)
***************
*** 5056,5063 ****
# reset to page 0 when exiting curses application (\E-07 )
tvi912-2p|tvi920-2p|tvi-2p|televideo w/2 pages:\
:te=\E-07\s:ti=\E-17\s:tc=tvi912:
! # We got some new tvi912c terminals that act really weird on the regular
! # termcap, so one of our gurus worked this up. Seems that cursor
# addressing is broken.
tvi912cc|tvi912 at cowell college:\
:cm@:tc=tvi912c:
--- 5056,5063 ----
# reset to page 0 when exiting curses application (\E-07 )
tvi912-2p|tvi920-2p|tvi-2p|televideo w/2 pages:\
:te=\E-07\s:ti=\E-17\s:tc=tvi912:
! # We got some new tvi912c terminals that act really weird on the regular
! # termcap, so one of our gurus worked this up. Seems that cursor
# addressing is broken.
tvi912cc|tvi912 at cowell college:\
:cm@:tc=tvi912c:
***************
*** 5082,5088 ****
# 9: Even parity Odd parity
# 10: Steady cursor Blinking cursor
# (On Rev E or lower, use W25 instead of switch 10.)
! #
# S5 UART/Terminal options:
# Open Closed
# 1: P3-6 Not connected DSR received on P3-6
--- 5082,5088 ----
# 9: Even parity Odd parity
# 10: Steady cursor Blinking cursor
# (On Rev E or lower, use W25 instead of switch 10.)
! #
# S5 UART/Terminal options:
# Open Closed
# 1: P3-6 Not connected DSR received on P3-6
***************
*** 5108,5117 ****
#
# S4/W31: Enables automatic LF upon receipt of CR from
# remote or keyboard.
! # S4/W32: Enables transmission of EOT at the end of Send. If not
# installed, a carriage return is sent.
# S4/W33: Disables automatic carriage return in column 80.
! # S4/W34: Selects Page Print Mode as initial condition. If not
# installed, Extension Mode is selected.
#
tvi920b|tvi920c|new televideo 920:\
--- 5108,5117 ----
#
# S4/W31: Enables automatic LF upon receipt of CR from
# remote or keyboard.
! # S4/W32: Enables transmission of EOT at the end of Send. If not
# installed, a carriage return is sent.
# S4/W33: Disables automatic carriage return in column 80.
! # S4/W34: Selects Page Print Mode as initial condition. If not
# installed, Extension Mode is selected.
#
tvi920b|tvi920c|new televideo 920:\
***************
*** 5195,5213 ****
# U U D U 7200
# U U U D 9600
# U U U U 19200
! #
! #
# Settings for word length and stop-bits (S1)
#
# Position Description
! # 5 6
# ---------------------------
# U - 7-bit word
# D - 8-bit word
# - U 2 stop bits
# - D 1 stop bit
! #
! #
# S2 (external) settings
#
# Position Up Dn Description
--- 5195,5213 ----
# U U D U 7200
# U U U D 9600
# U U U U 19200
! #
! #
# Settings for word length and stop-bits (S1)
#
# Position Description
! # 5 6
# ---------------------------
# U - 7-bit word
# D - 8-bit word
# - U 2 stop bits
# - D 1 stop bit
! #
! #
# S2 (external) settings
#
# Position Up Dn Description
***************
*** 5220,5238 ****
# --------------------------------------------
# 3 X
# 4 X No parity
! # 5 X
# --------------------------------------------
# 3 X
# 4 X Odd parity
! # 5 X
# --------------------------------------------
# 3 X
# 4 X Even parity
! # 5 X
# --------------------------------------------
! # 3 X
# 4 X Mark parity
! # 5 X
# --------------------------------------------
# 3 X
# 4 X Space parity
--- 5220,5238 ----
# --------------------------------------------
# 3 X
# 4 X No parity
! # 5 X
# --------------------------------------------
# 3 X
# 4 X Odd parity
! # 5 X
# --------------------------------------------
# 3 X
# 4 X Even parity
! # 5 X
# --------------------------------------------
! # 3 X
# 4 X Mark parity
! # 5 X
# --------------------------------------------
# 3 X
# 4 X Space parity
***************
*** 5245,5291 ****
# 8 X
# --------------------------------------------
# 7 X Full Duplex
! # 8 X
# --------------------------------------------
# 7 X Block mode
! # 8 X
# --------------------------------------------
# 9 X 50 Hz
# X 60 Hz
# --------------------------------------------
# 10 X CR/LF (Auto LF)
# X CR only
! #
# S3 (internal switch) settings:
! #
# Position Up Dn Description
# --------------------------------------------
! # 1 X Keyclick off
# X Keyclick on
# --------------------------------------------
# 2 X English
! # 3 X
# --------------------------------------------
# 2 X German
! # 3 X
# --------------------------------------------
# 2 X French
! # 3 X
# --------------------------------------------
# 2 X Spanish
! # 3 X
# --------------------------------------------
# 4 X Blinking block cursor
! # 5 X
# --------------------------------------------
# 4 X Blinking underline cursor
! # 5 X
# --------------------------------------------
# 4 X Steady block cursor
! # 5 X
# --------------------------------------------
# 4 X Steady underline cursor
! # 5 X
# --------------------------------------------
# 6 X Screen blanking timer (ON)
# X Screen blanking timer (OFF)
--- 5245,5291 ----
# 8 X
# --------------------------------------------
# 7 X Full Duplex
! # 8 X
# --------------------------------------------
# 7 X Block mode
! # 8 X
# --------------------------------------------
# 9 X 50 Hz
# X 60 Hz
# --------------------------------------------
# 10 X CR/LF (Auto LF)
# X CR only
! #
# S3 (internal switch) settings:
! #
# Position Up Dn Description
# --------------------------------------------
! # 1 X Keyclick off
# X Keyclick on
# --------------------------------------------
# 2 X English
! # 3 X
# --------------------------------------------
# 2 X German
! # 3 X
# --------------------------------------------
# 2 X French
! # 3 X
# --------------------------------------------
# 2 X Spanish
! # 3 X
# --------------------------------------------
# 4 X Blinking block cursor
! # 5 X
# --------------------------------------------
# 4 X Blinking underline cursor
! # 5 X
# --------------------------------------------
# 4 X Steady block cursor
! # 5 X
# --------------------------------------------
# 4 X Steady underline cursor
! # 5 X
# --------------------------------------------
# 6 X Screen blanking timer (ON)
# X Screen blanking timer (OFF)
***************
*** 5323,5329 ****
# From: Todd Litwin <address@hidden> 28 May 1993
# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
! # for additional capabilities,
# The following tvi descriptions from B:pjphar and virus!mike
# is for all 950s. It sets the following attributes:
# full duplex (\EDF) write protect off (\E()
--- 5323,5329 ----
# From: Todd Litwin <address@hidden> 28 May 1993
# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
! # for additional capabilities,
# The following tvi descriptions from B:pjphar and virus!mike
# is for all 950s. It sets the following attributes:
# full duplex (\EDF) write protect off (\E()
***************
*** 5342,5352 ****
# start-protected field delimiter (\Ex2\200\200)
# end-protected field delimiter (\Ex3\200\200)
# set end of text delimiter to carriage return/null (\Ex4\r\200)
! #
# TVI 950 Switch Setting Reference Charts
! #
# TABLE 1:
! #
# S1 1 2 3 4 5 6 7 8 9 10
# +-----------------------+-----+-----+-----------------------+
# | Computer Baud Rate |Data |Stop | Printer Baud Rate |
--- 5342,5352 ----
# start-protected field delimiter (\Ex2\200\200)
# end-protected field delimiter (\Ex3\200\200)
# set end of text delimiter to carriage return/null (\Ex4\r\200)
! #
# TVI 950 Switch Setting Reference Charts
! #
# TABLE 1:
! #
# S1 1 2 3 4 5 6 7 8 9 10
# +-----------------------+-----+-----+-----------------------+
# | Computer Baud Rate |Data |Stop | Printer Baud Rate |
***************
*** 5356,5363 ****
# +------+-----------------------+-----+-----+-----------------------+
# | Down | TABLE 2 | 8 | 1 | TABLE 2 |
# +------+-----------------------+-----+-----+-----------------------+
! #
! #
# S2 1 2 3 4 5 6 7 8 9 10
# +-----+-----+-----------------+-----+-----------+-----+-----+
# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
--- 5356,5363 ----
# +------+-----------------------+-----+-----+-----------------------+
# | Down | TABLE 2 | 8 | 1 | TABLE 2 |
# +------+-----------------------+-----+-----+-----------------------+
! #
! #
# S2 1 2 3 4 5 6 7 8 9 10
# +-----+-----+-----------------+-----+-----------+-----+-----+
# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
***************
*** 5366,5374 ****
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
! #
# TABLE 2:
! #
# +-----------+-----+-----+-----+-----+-----------+
# | Display | 1 | 2 | 3 | 4 | Baud |
# +-----------+-----+-----+-----+-----+ |
--- 5366,5374 ----
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
! #
# TABLE 2:
! #
# +-----------+-----+-----+-----+-----+-----------+
# | Display | 1 | 2 | 3 | 4 | Baud |
# +-----------+-----+-----+-----+-----+ |
***************
*** 5391,5397 ****
# | D | U | U | U | 9600 |
# | U | U | U | U | 19200 |
# +-----+-----+-----+-----+-----------+
! #
# TABLE 3:
# +-----+-----+-----+-----------+
# | 3 | 4 | 5 | Parity |
--- 5391,5397 ----
# | D | U | U | U | 9600 |
# | U | U | U | U | 19200 |
# +-----+-----+-----+-----+-----------+
! #
# TABLE 3:
# +-----+-----+-----+-----------+
# | 3 | 4 | 5 | Parity |
***************
*** 5403,5409 ****
# | U | U | U | Space |
# +-----+-----+-----+-----------+
# X = don't care
! #
# CHART:
# +-----+-----+-----------------+
# | 7 | 8 | Communication |
--- 5403,5409 ----
# | U | U | U | Space |
# +-----+-----+-----+-----------+
# X = don't care
! #
# CHART:
# +-----+-----+-----------------+
# | 7 | 8 | Communication |
***************
*** 5413,5423 ****
# | U | D | Block |
# | U | U | Local |
# +-----+-----+-----------------+
! #
! # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
! # I also inserted :ic: and :kI:; the :ko: string indicated that :IC:
# should be present and all tvi native modes use the same string for this.
! # Finally, note that BSD has cud1=^V. -- esr)
tvi950|televideo 950:\
:am:bs:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:sg#1:\
--- 5413,5423 ----
# | U | D | Block |
# | U | U | Local |
# +-----+-----+-----------------+
! #
! # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
! # I also inserted :ic: and :kI:; the :ko: string indicated that :IC:
# should be present and all tvi native modes use the same string for this.
! # Finally, note that BSD has cud1=^V. -- esr)
tvi950|televideo 950:\
:am:bs:hs:mi:ms:xn:xo:\
:co#80:it#8:li#24:sg#1:\
***************
*** 5532,5542 ****
:te=\E[H\E[J\E[V:ti=\E[U\E[?20l\E[?7h\E[1Q:tc=tvi970:
# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
# per line (rather than 40), Esc K chooses the normal character set. Not sure
! # padding is needed, but adapted from the tvi920c termcap. The :so: and
# :us: strings are klutzy, but at least use no screen space.
# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
# its absence means <smam>=\Ev isn't safe to use. -- esr)
! # From: Gene Rochlin <address@hidden> 9/19/84.
# The :cd:/:k0:/:k1:/:kh:/<mc4>, and <mc5> caps are from BRL, which says:
# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
tvipt|televideo personal terminal:\
--- 5532,5542 ----
:te=\E[H\E[J\E[V:ti=\E[U\E[?20l\E[?7h\E[1Q:tc=tvi970:
# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
# per line (rather than 40), Esc K chooses the normal character set. Not sure
! # padding is needed, but adapted from the tvi920c termcap. The :so: and
# :us: strings are klutzy, but at least use no screen space.
# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
# its absence means <smam>=\Ev isn't safe to use. -- esr)
! # From: Gene Rochlin <address@hidden> 9/19/84.
# The :cd:/:k0:/:k1:/:kh:/<mc4>, and <mc5> caps are from BRL, which says:
# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
tvipt|televideo personal terminal:\
***************
*** 5582,5588 ****
# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
# Recently I hacked together the following termcap for Visual
# Technology's Visual 50 terminal. It's a slight modification of
! # the vt52 termcap.
# It's intended to run when the Visual 50 is in vt52 emulation mode
# (I know what you're thinking; if it's emulating a vt52, then why
# another termcap? Well, it turns out that the Visual 50 can handle
--- 5582,5588 ----
# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
# Recently I hacked together the following termcap for Visual
# Technology's Visual 50 terminal. It's a slight modification of
! # the vt52 termcap.
# It's intended to run when the Visual 50 is in vt52 emulation mode
# (I know what you're thinking; if it's emulating a vt52, then why
# another termcap? Well, it turns out that the Visual 50 can handle
***************
*** 5840,5846 ****
# To further complicate things one of the attributes must be
# black (either the foreground or the background). In reverse video
# the background changes color with black letters. In normal video
! # the foreground changes colors on a black background.
# This terminfo uses some of the more advanced features of curses
# to display both color and blink. In the final analysis I am not
# sure that the wy350 runs better with this terminfo than it does
--- 5840,5846 ----
# To further complicate things one of the attributes must be
# black (either the foreground or the background). In reverse video
# the background changes color with black letters. In normal video
! # the foreground changes colors on a black background.
# This terminfo uses some of the more advanced features of curses
# to display both color and blink. In the final analysis I am not
# sure that the wy350 runs better with this terminfo than it does
***************
*** 6322,6328 ****
# (instead of application), and change \E[ to \233 for all the keys in
# terminfo. At one point, I found some reference indicating that this
# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
! # me), but I can't find that and the server under my bookmark to "Wyse
# Technical" isn't responding. So there's the question of wether the wy85
# terminfo should reflect the manufactuer's intended behaviour of the terminal
# or the actual."
--- 6322,6328 ----
# (instead of application), and change \E[ to \233 for all the keys in
# terminfo. At one point, I found some reference indicating that this
# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
! # me), but I can't find that and the server under my bookmark to "Wyse
# Technical" isn't responding. So there's the question of wether the wy85
# terminfo should reflect the manufactuer's intended behaviour of the terminal
# or the actual."
***************
*** 6433,6439 ****
:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:tc=adm+sgr:
#
! # lines 24 columns 80 vb
#
wy325-vb|wyse325-vb|wyse-325 with visual bell:\
:bl@:tc=wy325:
--- 6433,6439 ----
:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:tc=adm+sgr:
#
! # lines 24 columns 80 vb
#
wy325-vb|wyse325-vb|wyse-325 with visual bell:\
:bl@:tc=wy325:
***************
*** 6457,6463 ****
:Nl@:lh@:li#25:lw@:\
:pn@:r3=\EwG\Ee):tc=wy325-w:
#
! # lines 25 columns 132 vb
#
wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video:\
:bl@:tc=wy325-w:
--- 6457,6463 ----
:Nl@:lh@:li#25:lw@:\
:pn@:r3=\EwG\Ee):tc=wy325-w:
#
! # lines 25 columns 132 vb
#
wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video:\
:bl@:tc=wy325-w:
***************
*** 6475,6481 ****
:Nl@:lh@:li#42:lw@:\
:pn@:r3=\EwG\Ee):tc=wy325-w:
#
! # lines 42 columns 132 vb
#
wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell:\
:bl@:tc=wy325-w:
--- 6475,6481 ----
:Nl@:lh@:li#42:lw@:\
:pn@:r3=\EwG\Ee):tc=wy325-w:
#
! # lines 42 columns 132 vb
#
wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell:\
:bl@:tc=wy325-w:
***************
*** 6492,6498 ****
:Nl@:lh@:li#43:lw@:\
:pn@:r3=\EwG\Ee):tc=wy325-w:
#
! # lines 43 columns 132 vb
#
wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell:\
:bl@:tc=wy325-w:
--- 6492,6498 ----
:Nl@:lh@:li#43:lw@:\
:pn@:r3=\EwG\Ee):tc=wy325-w:
#
! # lines 43 columns 132 vb
#
wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell:\
:bl@:tc=wy325-w:
***************
*** 6621,6627 ****
#
#TITLE: TERMINFO ENTRY WY520
#DATE: 8/5/93
! # The WY520 terminfo is based on the WY285 entry published on the WYSE
# BBS with the addition of more function keys and special keys.
#
# rs1 -> set personality
--- 6621,6627 ----
#
#TITLE: TERMINFO ENTRY WY520
#DATE: 8/5/93
! # The WY520 terminfo is based on the WY285 entry published on the WYSE
# BBS with the addition of more function keys and special keys.
#
# rs1 -> set personality
***************
*** 6951,6957 ****
# level 0:
# ^L -- clear window/reset current attribute to default
# ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
! #
# bit: 6 5 4 3 2 1 0
# | | | | |
# +---+---+ | +---+---+
--- 6951,6957 ----
# level 0:
# ^L -- clear window/reset current attribute to default
# ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
! #
# bit: 6 5 4 3 2 1 0
# | | | | |
# +---+---+ | +---+---+
***************
*** 6962,6969 ****
# level 0+:
# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1
lines
# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1
lines
! # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
! # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
# (^V^L and ^V^M set the current attribute as a side-effect.)
# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
# in the pattern, <c> the number of times the pattern
--- 6962,6969 ----
# level 0+:
# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1
lines
# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1
lines
! # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
! # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
# (^V^L and ^V^M set the current attribute as a side-effect.)
# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
# in the pattern, <c> the number of times the pattern
***************
*** 6980,6986 ****
# ^V^T -- change highlight at current cursor poition
to %c
# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
! # -- define window
#
# From: Eric S. Raymond <address@hidden> 1 Nov 1995
# (The :mb:/:md:/:mr:/:as:/:us:/:so: capabilities exist only to
--- 6980,6986 ----
# ^V^T -- change highlight at current cursor poition
to %c
# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
! # -- define window
#
# From: Eric S. Raymond <address@hidden> 1 Nov 1995
# (The :mb:/:md:/:mr:/:as:/:us:/:so: capabilities exist only to
***************
*** 7041,7054 ****
# Command Character is 0xFE (decimal 254, octal 376)
#
# On this device, cursor addressability isn't possible. The LCD expects:
! # 0xfe G <col> <row>
# for cup: %p1 == row and %p2 is column
#
# This line:
# cup=\376G%p2%c%p1%c
! # LOOKS like it will work, but sometimes only one of the two numbers is sent.
# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
! #
# Alas, there is no cursor upline capability on this display.
#
# These entries add some 'sanity stuff' to the clear function. That is, it
--- 7041,7054 ----
# Command Character is 0xFE (decimal 254, octal 376)
#
# On this device, cursor addressability isn't possible. The LCD expects:
! # 0xfe G <col> <row>
# for cup: %p1 == row and %p2 is column
#
# This line:
# cup=\376G%p2%c%p1%c
! # LOOKS like it will work, but sometimes only one of the two numbers is sent.
# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
! #
# Alas, there is no cursor upline capability on this display.
#
# These entries add some 'sanity stuff' to the clear function. That is, it
***************
*** 7109,7115 ****
# bold= reverse + underline = 2 | 3.
# note that half-bright blinking doesn't look different from normal blinking.
# NOTE:you must program the function keys first, label second!
! # (att4410: a BSD entry has been seen with the following capabilities:
# :is=\E[?6l:, :k1=\EOc:, :k2=\EOd:, :k3=\EOe:, :k4=\EOg:,
# :k6=\EOh:, :k7=\EOi:, :k8=\EOj:, -- esr)
# (untranslatable capabilities removed to fit entry within 1023 bytes)
--- 7109,7115 ----
# bold= reverse + underline = 2 | 3.
# note that half-bright blinking doesn't look different from normal blinking.
# NOTE:you must program the function keys first, label second!
! # (att4410: a BSD entry has been seen with the following capabilities:
# :is=\E[?6l:, :k1=\EOc:, :k2=\EOd:, :k3=\EOe:, :k4=\EOg:,
# :k6=\EOh:, :k7=\EOi:, :k8=\EOj:, -- esr)
# (untranslatable capabilities removed to fit entry within 1023 bytes)
***************
*** 7162,7168 ****
:sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
! #
# Teletype Model 5420 -- A souped up 5410, with multiple windows,
# even! the 5420 has three modes: scroll, window or page mode
# this terminfo should work in scroll or window mode, but doesn't
--- 7162,7168 ----
:sc=\E7:se=\E[m:sf=^J:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
! #
# Teletype Model 5420 -- A souped up 5410, with multiple windows,
# even! the 5420 has three modes: scroll, window or page mode
# this terminfo should work in scroll or window mode, but doesn't
***************
*** 7190,7196 ****
# :i3: set screen color to black,
# No representation in terminfo for the delete word key: kdw1=\Ed
# Key capabilities assume the power-up send sequence...
! # This :te: is not strictly necessary, but it helps maximize
# memory usefulness: :te=\Ez:,
# Alternate sgr0: :me=\E[m\EW^O:,
# Alternate sgr:
:sa=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;:,
--- 7190,7196 ----
# :i3: set screen color to black,
# No representation in terminfo for the delete word key: kdw1=\Ed
# Key capabilities assume the power-up send sequence...
! # This :te: is not strictly necessary, but it helps maximize
# memory usefulness: :te=\Ez:,
# Alternate sgr0: :me=\E[m\EW^O:,
# Alternate sgr:
:sa=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;:,
***************
*** 7232,7238 ****
# Note that this mode permits programming USER PF KEYS and labels
# However, when you program user pf labels you have to reselect
! # user pf keys to make them appear!
att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not
changing labels:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:\
:..pn=\E[%p1%d;0;0;1q%p2%\:-16.16s:\
--- 7232,7238 ----
# Note that this mode permits programming USER PF KEYS and labels
# However, when you program user pf labels you have to reselect
! # user pf keys to make them appear!
att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not
changing labels:\
:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:\
:..pn=\E[%p1%d;0;0;1q%p2%\:-16.16s:\
***************
*** 7309,7321 ****
# The following is a terminfo entry for the Teletype 4424
# asynchronous keyboard-display terminal. It supports
# the vi editor. The terminal must be set up as follows,
! #
# HIGHLIGHT DEFINITION 3-TONE
# DISPLAY FUNCTION GROUP III
! #
# The second entry below provides limited (a la adm3a)
# operation under GROUP II.
! #
# This must be used with DISPLAY FUNCTION GROUP I or III
# and HIGHLIGHT DEFINITION 3-TONE
# The terminal has either bold or blink, depending on options
--- 7309,7321 ----
# The following is a terminfo entry for the Teletype 4424
# asynchronous keyboard-display terminal. It supports
# the vi editor. The terminal must be set up as follows,
! #
# HIGHLIGHT DEFINITION 3-TONE
# DISPLAY FUNCTION GROUP III
! #
# The second entry below provides limited (a la adm3a)
# operation under GROUP II.
! #
# This must be used with DISPLAY FUNCTION GROUP I or III
# and HIGHLIGHT DEFINITION 3-TONE
# The terminal has either bold or blink, depending on options
***************
*** 7356,7367 ****
:nd=\E[C:nw=^M^J:se=\E[m:sf=^J:so=\E[7m:sr=\ET:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
! # The Teletype 5425 is really version 2 of the Teletype 5420. It
! # is quite similar, except for some minor differences. No page
! # mode, for example, so all of the :cm: sequences used above have
! # to change back to what's being used for the 5410. Many of the
# option settings have changed their numbering as well.
! #
# This has been tested on a preliminary model.
#
# (att5425: added <rmam>/<smam> based on the init string -- esr)
--- 7356,7367 ----
:nd=\E[C:nw=^M^J:se=\E[m:sf=^J:so=\E[7m:sr=\ET:ta=^I:\
:ue=\E[m:up=\E[A:us=\E[4m:
! # The Teletype 5425 is really version 2 of the Teletype 5420. It
! # is quite similar, except for some minor differences. No page
! # mode, for example, so all of the :cm: sequences used above have
! # to change back to what's being used for the 5410. Many of the
# option settings have changed their numbering as well.
! #
# This has been tested on a preliminary model.
#
# (att5425: added <rmam>/<smam> based on the init string -- esr)
***************
*** 7396,7402 ****
:co#132:lm#54:ws#97:\
:i1=\E[?3h:tc=tty5425:
! # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
# I also added <rmam>/<smam> -- esr)
att4426|tty4426|teletype 4426S:\
:am:da:db:xo:\
--- 7396,7402 ----
:co#132:lm#54:ws#97:\
:i1=\E[?3h:tc=tty5425:
! # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
# I also added <rmam>/<smam> -- esr)
att4426|tty4426|teletype 4426S:\
:am:da:db:xo:\
***************
*** 7417,7423 ****
:us=\E[4m:
# Terminfo entry for the AT&T 510 A Personal Terminal
! # Function keys 9 - 16 are available only after the
# screen labeled (soft keys/action blocks) are labeled. Function key
# 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
--- 7417,7423 ----
:us=\E[4m:
# Terminfo entry for the AT&T 510 A Personal Terminal
! # Function keys 9 - 16 are available only after the
# screen labeled (soft keys/action blocks) are labeled. Function key
# 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
***************
*** 7450,7458 ****
# Function key 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
! # There are problems with soft key labeling. These are due to
# strangenesses in the native terminal that are impossible to
! # describe in a terminfo.
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
--- 7450,7458 ----
# Function key 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
! # There are problems with soft key labeling. These are due to
# strangenesses in the native terminal that are impossible to
! # describe in a terminfo.
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
# (acsc removed to fit entry within 1023 bytes)
***************
*** 7742,7750 ****
# ESC [ 50;4| set 700 native mode (really is 605)
# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
# ESC [ 53;0| set GenFlow to Xon/Xoff
! # ESC [ 8 ;0| set CR on NL
# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
! # ESC [ ? 4 l jump scroll
# ESC [ ? 5 l/h video: normal (l); reverse (h)
# ESC [ ?13 l Labels on
# ESC [ ?15 l parity check = no
--- 7742,7750 ----
# ESC [ 50;4| set 700 native mode (really is 605)
# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
# ESC [ 53;0| set GenFlow to Xon/Xoff
! # ESC [ 8 ;0| set CR on NL
# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
! # ESC [ ? 4 l jump scroll
# ESC [ ? 5 l/h video: normal (l); reverse (h)
# ESC [ ?13 l Labels on
# ESC [ ?15 l parity check = no
***************
*** 7766,7772 ****
# and the rmso/smso settings from the 730.
#
# Note: For the same reason as above in rmso I changed exit under-score mode
! # to specifically turn off underscore, rather than return to all normal
# attributes
#
# Note: The following pkey_xmit is taken from the 605V2 which contained the
--- 7766,7772 ----
# and the rmso/smso settings from the 730.
#
# Note: For the same reason as above in rmso I changed exit under-score mode
! # to specifically turn off underscore, rather than return to all normal
# attributes
#
# Note: The following pkey_xmit is taken from the 605V2 which contained the
***************
*** 7838,7844 ****
# att730 has status line of 80 chars
# These were commented out: :SF=\E[%p1%dS:, :SR=\E[%p1%dT:,
# the <kf25> and up keys are used for shifted system Fkeys
! # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
# currently the same as :kh: (unshifted HOME or \E[H). On the 102, 102+1
# and 122 key keyboards, the 730's translation is \E[2J. For consistency
# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
--- 7838,7844 ----
# att730 has status line of 80 chars
# These were commented out: :SF=\E[%p1%dS:, :SR=\E[%p1%dT:,
# the <kf25> and up keys are used for shifted system Fkeys
! # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
# currently the same as :kh: (unshifted HOME or \E[H). On the 102, 102+1
# and 122 key keyboards, the 730's translation is \E[2J. For consistency
# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
***************
*** 7921,7927 ****
#
# MAIL
#
! # version 1 note:
# The character string sent by key 'kf26' may be user programmable
# to send either \E[16s, or \E[26s.
# The character string sent by key 'krfr' may be user programmable
--- 7921,7927 ----
#
# MAIL
#
! # version 1 note:
# The character string sent by key 'kf26' may be user programmable
# to send either \E[16s, or \E[26s.
# The character string sent by key 'krfr' may be user programmable
***************
*** 8136,8142 ****
:co#132:li#24:\
:bl=^G:cr=^M:do=^J:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
:sf=^J:tc=ampex219:
! # (ampex232: removed :if=/usr/share/tabset/ampex:, no file and no :st: --esr)
ampex232|ampex-232|Ampex Model 232:\
:am:\
:co#80:li#24:sg#1:\
--- 8136,8142 ----
:co#132:li#24:\
:bl=^G:cr=^M:do=^J:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
:sf=^J:tc=ampex219:
! # (ampex232: removed :if=/usr/share/tabset/ampex:, no file and no :st: --esr)
ampex232|ampex-232|Ampex Model 232:\
:am:\
:co#80:li#24:sg#1:\
***************
*** 8145,8151 ****
:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\
:k8=^AH\r:k9=^AI\r:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
:mk@:nd=^L:ta=^I:up=^K:vb=\Eb\Ed:ve=\E.4:vi=\E.0:tc=adm+sgr:
! # (ampex: removed :if=/usr/share/tabset/amp-132:, no file and no :st: -- esr)
ampex232w|Ampex Model 232 / 132 columns:\
:co#132:li#24:\
:is=\E\034Eg\El:tc=ampex232:
--- 8145,8151 ----
:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\
:k8=^AH\r:k9=^AI\r:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
:mk@:nd=^L:ta=^I:up=^K:vb=\Eb\Ed:ve=\E.4:vi=\E.0:tc=adm+sgr:
! # (ampex: removed :if=/usr/share/tabset/amp-132:, no file and no :st: -- esr)
ampex232w|Ampex Model 232 / 132 columns:\
:co#132:li#24:\
:is=\E\034Eg\El:tc=ampex232:
***************
*** 8505,8512 ****
# Fax: (516)-342-7378
# Web: http://boundless.com
#
! # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
! # In 1995 Boundless acquired DEC's terminals business.
#
# Regent: lowest common denominator, works on all regents.
--- 8505,8512 ----
# Fax: (516)-342-7378
# Web: http://boundless.com
#
! # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
! # In 1995 Boundless acquired DEC's terminals business.
#
# Regent: lowest common denominator, works on all regents.
***************
*** 8553,8559 ****
:se@:so@:ue@:us@:vs@:tc=viewpoint:
# From: Jay S. Rouman <address@hidden> 5 Jul 92
! # The :vi:/:ve:/:sa:/:me: strings were added by ESR from specs.
# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
# invis=01000100 and %c is the logical or of desired attributes.
--- 8553,8559 ----
:se@:so@:ue@:us@:vs@:tc=viewpoint:
# From: Jay S. Rouman <address@hidden> 5 Jul 92
! # The :vi:/:ve:/:sa:/:me: strings were added by ESR from specs.
# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
# invis=01000100 and %c is the logical or of desired attributes.
***************
*** 8657,8663 ****
# terminal. Then change any options you want (provided that they are
# compatible with the termcap). For my terminal I set: Screen
# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
! # on. I also set up mine for parity (but you may not need it). Then
# save the setup with ^S.
# (cit101e-rv: added empty :te: to suppress a tic warning. --esr)
cit101e-rv|Citoh CIT-101e (sets reverse video):\
--- 8657,8663 ----
# terminal. Then change any options you want (provided that they are
# compatible with the termcap). For my terminal I set: Screen
# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
! # on. I also set up mine for parity (but you may not need it). Then
# save the setup with ^S.
# (cit101e-rv: added empty :te: to suppress a tic warning. --esr)
cit101e-rv|Citoh CIT-101e (sets reverse video):\
***************
*** 8791,8797 ****
# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
#
# Part of the long initialization string defines the "DOWN" key to the left
! # of the tab key to send an ESC. The real ESC key is positioned way out
# in right field.
#
# The termcap won't work in 132 column mode due to the way it it moves the
--- 8791,8797 ----
# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
#
# Part of the long initialization string defines the "DOWN" key to the left
! # of the tab key to send an ESC. The real ESC key is positioned way out
# in right field.
#
# The termcap won't work in 132 column mode due to the way it it moves the
***************
*** 8814,8820 ****
#### Getronics
#
! # Getronics is a Dutch electronics company that at one time was called
# `Geveke' and made async terminals; but (according to the company itself!)
# they've lost all their documentation on the command set. The hardware
# documentation suggests the terminals were actually manufactured by a
--- 8814,8820 ----
#### Getronics
#
! # Getronics is a Dutch electronics company that at one time was called
# `Geveke' and made async terminals; but (according to the company itself!)
# they've lost all their documentation on the command set. The hardware
# documentation suggests the terminals were actually manufactured by a
***************
*** 8866,8872 ****
# Vox: (610)-277-8300
# Fax: (610)-275-5739
# Net: address@hidden
! #
# John Martin <address@hidden> is their termcap expert. They're mostly out of
# the character-terminal business now (1995) and making X terminals. In
# particular, the whole `Concept' line described here was discontinued long
--- 8866,8872 ----
# Vox: (610)-277-8300
# Fax: (610)-275-5739
# Net: address@hidden
! #
# John Martin <address@hidden> is their termcap expert. They're mostly out of
# the character-terminal business now (1995) and making X terminals. In
# particular, the whole `Concept' line described here was discontinued long
***************
*** 8879,8907 ****
#
# There seem to be a number of different versions of the C108 PROMS
# (with bug fixes in its Z-80 program).
! #
# The first one that we had would lock out the keyboard of you
# sent lots of short lines (like /usr/dict/words) at 9600 baud.
# Try that on your C108 and see if it sends a ^S when you type it.
# If so, you have an old version of the PROMs.
! #
# You should configure the C108 to send ^S/^Q before running this.
# It is much faster (at 9600 baud) than the c100 because the delays
# are not fixed.
# new status line display entries for c108-8p:
! # :i3: - init str #3 - setup term for status display -
! # set programmer mode, select window 2, define window at last
# line of memory, set bkgnd stat mesg there, select window 0.
! #
! # :ts: - to status line - select window 2, home cursor, erase to
# end-of-window, 1/2 bright on, goto(line#0, col#?)
! #
# :fs: - from status line - 1/2 bright off, select window 0
! #
! # :ds: - disable status display - set bkgnd status mesg with
# illegal window #
! #
! # There are probably more function keys that should be added but
# I don't know what they are.
#
# No delays needed on c108 because of ^S/^Q handshaking
--- 8879,8907 ----
#
# There seem to be a number of different versions of the C108 PROMS
# (with bug fixes in its Z-80 program).
! #
# The first one that we had would lock out the keyboard of you
# sent lots of short lines (like /usr/dict/words) at 9600 baud.
# Try that on your C108 and see if it sends a ^S when you type it.
# If so, you have an old version of the PROMs.
! #
# You should configure the C108 to send ^S/^Q before running this.
# It is much faster (at 9600 baud) than the c100 because the delays
# are not fixed.
# new status line display entries for c108-8p:
! # :i3: - init str #3 - setup term for status display -
! # set programmer mode, select window 2, define window at last
# line of memory, set bkgnd stat mesg there, select window 0.
! #
! # :ts: - to status line - select window 2, home cursor, erase to
# end-of-window, 1/2 bright on, goto(line#0, col#?)
! #
# :fs: - from status line - 1/2 bright off, select window 0
! #
! # :ds: - disable status display - set bkgnd status mesg with
# illegal window #
! #
! # There are probably more function keys that should be added but
# I don't know what they are.
#
# No delays needed on c108 because of ^S/^Q handshaking
***************
*** 8929,8970 ****
:ti=\EU\Ev 8\001D\Ep\r:tc=c108-8p:
# Concept 100:
! # These have only window relative cursor addressing, not screen
! # relative. To get it to work right here, smcup/rmcup (which
! # were invented for the concept) lock you into a one page
# window for screen style programs.
! #
# To get out of the one page window, we use a clever trick:
! # we set the window size to zero ("\Ev " in rmcup) which the
! # terminal recognizes as an error and resets the window to all
# of memory.
! #
# This trick works on c100 but does not on c108, sigh.
! #
! # Some tty drivers use cr3 for concept, others use nl3, hence
! # the delays on cr and ind below. This padding is only needed at
! # 9600 baud and up. One or the other is commented out depending on
# local conventions.
! #
! # 2 ms padding on :te: isn't always enough. 6 works fine. Maybe
# less than 6 but more than 2 will work.
! #
! # Note: can't use function keys f7-f10 because they are
! # indistinguishable from arrow keys (!), also, del char and
# clear eol use xon/xoff so they probably won't work very well.
! #
! # Also note that we don't define insrt/del char/delline/eop/send
! # because they don't transmit unless we reset them - I figured
# it was a bad idea to clobber their definitions.
! #
! # The <mc5> sequence changes the escape character to ^^ so that
! # escapes will be passed through to the printer. Only trouble
! # is that ^^ won't be - ^^ was chosen to be unlikely.
! # Unfortunately, if you're sending raster bits through to be
# plotted, any character you choose will be likely, so we lose.
#
! # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
! # cannot be # in is2 because it will hang a c100 with no printer
# if sent twice.
c100|concept100|concept|c104|c100-4p|hds concept 100:\
:am:bs:eo:mi:ul:xn:\
--- 8929,8970 ----
:ti=\EU\Ev 8\001D\Ep\r:tc=c108-8p:
# Concept 100:
! # These have only window relative cursor addressing, not screen
! # relative. To get it to work right here, smcup/rmcup (which
! # were invented for the concept) lock you into a one page
# window for screen style programs.
! #
# To get out of the one page window, we use a clever trick:
! # we set the window size to zero ("\Ev " in rmcup) which the
! # terminal recognizes as an error and resets the window to all
# of memory.
! #
# This trick works on c100 but does not on c108, sigh.
! #
! # Some tty drivers use cr3 for concept, others use nl3, hence
! # the delays on cr and ind below. This padding is only needed at
! # 9600 baud and up. One or the other is commented out depending on
# local conventions.
! #
! # 2 ms padding on :te: isn't always enough. 6 works fine. Maybe
# less than 6 but more than 2 will work.
! #
! # Note: can't use function keys f7-f10 because they are
! # indistinguishable from arrow keys (!), also, del char and
# clear eol use xon/xoff so they probably won't work very well.
! #
! # Also note that we don't define insrt/del char/delline/eop/send
! # because they don't transmit unless we reset them - I figured
# it was a bad idea to clobber their definitions.
! #
! # The <mc5> sequence changes the escape character to ^^ so that
! # escapes will be passed through to the printer. Only trouble
! # is that ^^ won't be - ^^ was chosen to be unlikely.
! # Unfortunately, if you're sending raster bits through to be
# plotted, any character you choose will be likely, so we lose.
#
! # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
! # cannot be # in is2 because it will hang a c100 with no printer
# if sent twice.
c100|concept100|concept|c104|c100-4p|hds concept 100:\
:am:bs:eo:mi:ul:xn:\
***************
*** 9140,9146 ****
#
#------- flash=\E[8;3!}^G\E[3;3!}
#------- flash=\E[?5h$<100>\E[?5l
! # There are two ways to flash the screen, both of which have their drawbacks.
# The first is to set the bell mode to video, transmit a bell character, and
# set the bell mode back - but to what? There is no way of knowing what the
# user's old bell setting was before we messed with it. Worse, the command to
--- 9140,9146 ----
#
#------- flash=\E[8;3!}^G\E[3;3!}
#------- flash=\E[?5h$<100>\E[?5l
! # There are two ways to flash the screen, both of which have their drawbacks.
# The first is to set the bell mode to video, transmit a bell character, and
# set the bell mode back - but to what? There is no way of knowing what the
# user's old bell setting was before we messed with it. Worse, the command to
***************
*** 9164,9170 ****
#
#------- dim= Not available in power on mode.
# You have a choice of defining low intensity characters as "half bright" and
! # high intensity as "normal", or defining low as "normal" and high as "bold".
# No matter which you choose, only one of either "half bright" or "bold" is
# available at any time, so taking the time to override the default is
# pointless.
--- 9164,9170 ----
#
#------- dim= Not available in power on mode.
# You have a choice of defining low intensity characters as "half bright" and
! # high intensity as "normal", or defining low as "normal" and high as "bold".
# No matter which you choose, only one of either "half bright" or "bold" is
# available at any time, so taking the time to override the default is
# pointless.
***************
*** 9193,9199 ****
# [DEL chosen as delimiter, but could be any character]
# [implied: ELSE do nothing]
# %; ENDIF
! #
#------- rs2=
# Not defined since anything it might do could be done faster and easier with
# either Meta-Shift-Reset or the main power switch.
--- 9193,9199 ----
# [DEL chosen as delimiter, but could be any character]
# [implied: ELSE do nothing]
# %; ENDIF
! #
#------- rs2=
# Not defined since anything it might do could be done faster and easier with
# either Meta-Shift-Reset or the main power switch.
***************
*** 9307,9316 ****
:i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\
:vb=\E[=205l\E[=205h:tc=avt+s:tc=avt-ns:
! #### Contel Business Systems.
#
! # Contel c300 and c320 terminals.
contel300|contel320|c300|Contel Business Systems C-300 or C-320:\
:am:in:xo:\
:co#80:li#24:sg#1:\
--- 9307,9316 ----
:i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\
:vb=\E[=205l\E[=205h:tc=avt+s:tc=avt-ns:
! #### Contel Business Systems.
#
! # Contel c300 and c320 terminals.
contel300|contel320|c300|Contel Business Systems C-300 or C-320:\
:am:in:xo:\
:co#80:li#24:sg#1:\
***************
*** 9332,9338 ****
#
# DG terminals have function keys that respond to the SHIFT and CTRL keys,
# e.g., SHIFT-F1 generates a different code from F1. To number the keys
! # sequentially, first the unmodified key codes are listed as F1 through F15.
# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
# F46 through F60. This is done in the private "includes" below whose names
--- 9332,9338 ----
#
# DG terminals have function keys that respond to the SHIFT and CTRL keys,
# e.g., SHIFT-F1 generates a different code from F1. To number the keys
! # sequentially, first the unmodified key codes are listed as F1 through F15.
# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
# F46 through F60. This is done in the private "includes" below whose names
***************
*** 9425,9431 ****
:tc=dgunix+fixed:
# Video attributes are coordinated using static variables set by "sgr", then
! # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute
settings.
# (D=dim, U=underline, B=blink, R=reverse.)
dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode:\
:ut:\
--- 9425,9431 ----
:tc=dgunix+fixed:
# Video attributes are coordinated using static variables set by "sgr", then
! # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute
settings.
# (D=dim, U=underline, B=blink, R=reverse.)
dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode:\
:ut:\
***************
*** 9540,9551 ****
:mh=\E[2m:mr=\E[7m:nd=\E[C:nl=\ED:se=\E[m:sf=\E[S:so=\E[7m:\
:sr=\E[T:ta=^I:ue=\E[05:up=\E[A:us=\E[4m:
# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
! # Data General 605x
# Ought to work for a Model 6242, Type D210 as well as a 605x.
# Note that the cursor-down key transmits ^Z. Job control users, beware!
# This also matches a posted description of something called a `Dasher 100'
! # so there's a dg100 alias here.
! # (dg6053: the 4.4BSD file had :le=^H:, :do=^J:, :nd=^S:. -- esr)
dg6053-old|dg100|data general 6053:\
:am:bs:bw:ul:\
:co#80:li#24:\
--- 9540,9551 ----
:mh=\E[2m:mr=\E[7m:nd=\E[C:nl=\ED:se=\E[m:sf=\E[S:so=\E[7m:\
:sr=\E[T:ta=^I:ue=\E[05:up=\E[A:us=\E[4m:
# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
! # Data General 605x
# Ought to work for a Model 6242, Type D210 as well as a 605x.
# Note that the cursor-down key transmits ^Z. Job control users, beware!
# This also matches a posted description of something called a `Dasher 100'
! # so there's a dg100 alias here.
! # (dg6053: the 4.4BSD file had :le=^H:, :do=^J:, :nd=^S:. -- esr)
dg6053-old|dg100|data general 6053:\
:am:bs:bw:ul:\
:co#80:li#24:\
***************
*** 10020,10026 ****
#### Datamedia (dm)
#
! # Datamedia was headquartered in Nashua, New Hampshire until it went
# out of business in 1993, but the ID plates on the terminals referred
# to the factory in Pennsauken, NJ. The factory was sold to a PCB board
# manufacturer which threw out all information about the terminals.
--- 10020,10026 ----
#### Datamedia (dm)
#
! # Datamedia was headquartered in Nashua, New Hampshire until it went
# out of business in 1993, but the ID plates on the terminals referred
# to the factory in Pennsauken, NJ. The factory was sold to a PCB board
# manufacturer which threw out all information about the terminals.
***************
*** 10043,10049 ****
:co#80:it#8:li#24:\
:bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:ho=^Y:\
:kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:nd=^\:sf=^J:ta=^I:up=^_:
! # dm2500: this terminal has both :IC: and :im:. Applications using
# termcap/terminfo directly (rather than through ncurses) might be confused.
dm2500|datamedia2500|datamedia 2500:\
:bs:nc:\
--- 10043,10049 ----
:co#80:it#8:li#24:\
:bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:ho=^Y:\
:kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:nd=^\:sf=^J:ta=^I:up=^_:
! # dm2500: this terminal has both :IC: and :im:. Applications using
# termcap/terminfo directly (rather than through ncurses) might be confused.
dm2500|datamedia2500|datamedia 2500:\
:bs:nc:\
***************
*** 10080,10106 ****
# Autorepeat 0=off 1=on
# Screen 0=Dark 1=light
# Cursor 0=u/l 1=block
! #
# 2 Margin Bell 0=off 1=on
# Keyclick 0=off 1=on
# Ansi/VT52 0=VT52 1=Ansi
# Xon/Xoff 0=Off 1=On
! #
# 3 Shift3 0=Hash 1=UK Pound
# Wrap 0=Off 1=On
# Newline 0=Off 1=On
# Interlace 0=Off 1=On
! #
# 4 Parity 0=Odd 1=Even
# Parity 0=Off 1=On
# Bits/Char 0=7 1=8
# Power 0=60Hz 1=50Hz
! #
# 5 Line Interface 0=EIA 1=Loop
# Aux Interface 0=EIA 1=Loop
! # Local Copy 0=Off 1=On
# Spare
! #
# 6 Aux Parity 0=Odd 1=Even
# Aux Parity 0=Off 1=On
# Aux Bits/Char 0=7 1=8
--- 10080,10106 ----
# Autorepeat 0=off 1=on
# Screen 0=Dark 1=light
# Cursor 0=u/l 1=block
! #
# 2 Margin Bell 0=off 1=on
# Keyclick 0=off 1=on
# Ansi/VT52 0=VT52 1=Ansi
# Xon/Xoff 0=Off 1=On
! #
# 3 Shift3 0=Hash 1=UK Pound
# Wrap 0=Off 1=On
# Newline 0=Off 1=On
# Interlace 0=Off 1=On
! #
# 4 Parity 0=Odd 1=Even
# Parity 0=Off 1=On
# Bits/Char 0=7 1=8
# Power 0=60Hz 1=50Hz
! #
# 5 Line Interface 0=EIA 1=Loop
# Aux Interface 0=EIA 1=Loop
! # Local Copy 0=Off 1=On
# Spare
! #
# 6 Aux Parity 0=Odd 1=Even
# Aux Parity 0=Off 1=On
# Aux Bits/Char 0=7 1=8
***************
*** 10227,10233 ****
#### Fluke
#
! # The f1720a differences from ANSI: no auto margin, destructive
# tabs, # of lines, funny highlighting and underlining
f1720|f1720a|fluke 1720A:\
:xt:\
--- 10227,10233 ----
#### Fluke
#
! # The f1720a differences from ANSI: no auto margin, destructive
# tabs, # of lines, funny highlighting and underlining
f1720|f1720a|fluke 1720A:\
:xt:\
***************
*** 10266,10272 ****
# as ^V, the Control Character Quoting capability (^V in insert mode)
# is lost! It cannot be remapped in vi because it is necessary to enter
# a ^V to to quote the ^V that is being remapped!!!
! #
# f110/f200 users will have to decide whether
# to lose the down cursor key or the quoting capability. We will opt
# initially for leaving the quoting capability out, since use of VI
--- 10266,10272 ----
# as ^V, the Control Character Quoting capability (^V in insert mode)
# is lost! It cannot be remapped in vi because it is necessary to enter
# a ^V to to quote the ^V that is being remapped!!!
! #
# f110/f200 users will have to decide whether
# to lose the down cursor key or the quoting capability. We will opt
# initially for leaving the quoting capability out, since use of VI
***************
*** 10369,10426 ****
# so we must have early Superbee2 (Model 600, according to phone conversation
# with mfr.). It has proved reliable except for some missing padding
# (notably after \EK and <nl> at bottom of screen).
! #
! # The key idea is that AEP mode is poison for :cm: & that US's in
! # the local memory should be avoided like the plague. That means
! # that the 2048 character local buffer is used as 25 lines of 80
! # characters, period. No scrolling local memory, folks. It also
# appears that we cannot use naked INS LINE feature since it uses
! # US. The sbi fakes :al: with an 80-space insert that may be too
! # slow at low speeds; also spaces get converted to \040 which is
# too long for some programs (not vi). DEL LINE is ok but slow.
! #
! # The <nl> string is designed for last line of screen ONLY; cup to
# 25th line corrects the motion inherent in scrolling to Page 1.
! #
# There is one understood bug. It is that the screen appears to
! # pop to a new (blank) page after a :nw:, or leave a half-line
! # ellipsis to a quad that is the extra 48 memory locations. The
! # data received is dumped into memory but not displayed. Not to
! # worry if :cm: is being used; the lines not displayed will be,
! # whenever the cursor is moved up there. Since :cm: is addressed
! # relative to MEMORY of window, nothing is lost; but beware of
# relative cursor motion (:up:,:do:,:nd:,:le:). Recommended,
# therefore, is setenv MORE -c .
! #
# WARNING: Not all features tested.
! #
! # Timings are assembled from 3 sources. Some timings may reflect
# SB2/Model 300 that were used if more conservative.
# Tested on a Model 600 at 1200 and 9600 bd.
! #
! # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
! # placed on the keyboard and useless because of AEP, is made
# into a backspace key. In use ESC must be pressed twice (to send)
! # and sending ^C must be prefixed by ESC to avoid that weird
# transmit mode associated with ENTER key.
! #
! # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
! # the screen, then it has dropped into ENTER mode; hit
# RESET--ONLINE--!tset.
! #
! # As delivered this machine has a FATAL feature that will throw
! # it into that strange transmit state (SPOW) if the space bar is
! # hit after a CR is received, but before receiving a LF (or a
# few others).
! #
! # The circuits MUST be modified to eliminate the SPOW latch.
! # This is done by strapping on chip A46 of the I/O board; cut
! # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
# chip. This mod has been checked out on a Mod 600 of Superbee II.
! # With this modification absurdly high timings on cr are
# unnecessary.
! #
! # NOTE WELL that the rear panel switch should be set to CR/LF,
# not AEP!
#
sb1|beehive superbee:\
--- 10369,10426 ----
# so we must have early Superbee2 (Model 600, according to phone conversation
# with mfr.). It has proved reliable except for some missing padding
# (notably after \EK and <nl> at bottom of screen).
! #
! # The key idea is that AEP mode is poison for :cm: & that US's in
! # the local memory should be avoided like the plague. That means
! # that the 2048 character local buffer is used as 25 lines of 80
! # characters, period. No scrolling local memory, folks. It also
# appears that we cannot use naked INS LINE feature since it uses
! # US. The sbi fakes :al: with an 80-space insert that may be too
! # slow at low speeds; also spaces get converted to \040 which is
# too long for some programs (not vi). DEL LINE is ok but slow.
! #
! # The <nl> string is designed for last line of screen ONLY; cup to
# 25th line corrects the motion inherent in scrolling to Page 1.
! #
# There is one understood bug. It is that the screen appears to
! # pop to a new (blank) page after a :nw:, or leave a half-line
! # ellipsis to a quad that is the extra 48 memory locations. The
! # data received is dumped into memory but not displayed. Not to
! # worry if :cm: is being used; the lines not displayed will be,
! # whenever the cursor is moved up there. Since :cm: is addressed
! # relative to MEMORY of window, nothing is lost; but beware of
# relative cursor motion (:up:,:do:,:nd:,:le:). Recommended,
# therefore, is setenv MORE -c .
! #
# WARNING: Not all features tested.
! #
! # Timings are assembled from 3 sources. Some timings may reflect
# SB2/Model 300 that were used if more conservative.
# Tested on a Model 600 at 1200 and 9600 bd.
! #
! # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
! # placed on the keyboard and useless because of AEP, is made
# into a backspace key. In use ESC must be pressed twice (to send)
! # and sending ^C must be prefixed by ESC to avoid that weird
# transmit mode associated with ENTER key.
! #
! # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
! # the screen, then it has dropped into ENTER mode; hit
# RESET--ONLINE--!tset.
! #
! # As delivered this machine has a FATAL feature that will throw
! # it into that strange transmit state (SPOW) if the space bar is
! # hit after a CR is received, but before receiving a LF (or a
# few others).
! #
! # The circuits MUST be modified to eliminate the SPOW latch.
! # This is done by strapping on chip A46 of the I/O board; cut
! # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
# chip. This mod has been checked out on a Mod 600 of Superbee II.
! # With this modification absurdly high timings on cr are
# unnecessary.
! #
! # NOTE WELL that the rear panel switch should be set to CR/LF,
# not AEP!
#
sb1|beehive superbee:\
***************
*** 10578,10584 ****
:kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:nd=^P:se=~^Y:sf=^J:so=~^_:\
:up=~^L:
# h1510 assumed to be in sane escape mode. Else use h1500.
! # (h1510: early versions of this entry apparently had ":se=\E^_:,
# :so=\E^Y:, but these caps were commented out in 8.3; also,
# removed incorrect and overridden ":do=^J:" -- esr)
hz1510|hazeltine 1510:\
--- 10578,10584 ----
:kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:nd=^P:se=~^Y:sf=^J:so=~^_:\
:up=~^L:
# h1510 assumed to be in sane escape mode. Else use h1500.
! # (h1510: early versions of this entry apparently had ":se=\E^_:,
# :so=\E^Y:, but these caps were commented out in 8.3; also,
# removed incorrect and overridden ":do=^J:" -- esr)
hz1510|hazeltine 1510:\
***************
*** 10628,10634 ****
# characters very fast vi seems not able to keep up and hangs while trying
# to insert. That's in insert mode while trying to insert in the middle of
# a line. It might be because the Esprit doesn't have insert char and delete
! # char as a built in function. Vi has to delete to end of line and then
# redraw the rest of the line.
esprit|Hazeltine Esprit I:\
:am:bs:bw:\
--- 10628,10634 ----
# characters very fast vi seems not able to keep up and hangs while trying
# to insert. That's in insert mode while trying to insert in the middle of
# a line. It might be because the Esprit doesn't have insert char and delete
! # char as a built in function. Vi has to delete to end of line and then
# redraw the rest of the line.
esprit|Hazeltine Esprit I:\
:am:bs:bw:\
***************
*** 10685,10691 ****
:ae=\E>B:as=\E>A:is=\E S:address@hidden>B:rs=\E S:s0=\E>B:\
:..sa=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;:\
:te=\E>B:ti=\E>B:tc=ibm3162:
! # From: Mark Easter <address@hidden> 29 Oct 1992
# removed kend, knp, kpp -TD
ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display:\
:am:bs:mi:ms:\
--- 10685,10691 ----
:ae=\E>B:as=\E>A:is=\E S:address@hidden>B:rs=\E S:s0=\E>B:\
:..sa=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;:\
:te=\E>B:ti=\E>B:tc=ibm3162:
! # From: Mark Easter <address@hidden> 29 Oct 1992
# removed kend, knp, kpp -TD
ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display:\
:am:bs:mi:ms:\
***************
*** 10747,10753 ****
:vb=\EG:
ibm-apl|apl|IBM apl terminal simulator:\
:li#25:tc=dm1520:
! # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
ibmmono|IBM workstation monochrome:\
:es:hs:\
--- 10747,10753 ----
:vb=\EG:
ibm-apl|apl|IBM apl terminal simulator:\
:li#25:tc=dm1520:
! # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
ibmmono|IBM workstation monochrome:\
:es:hs:\
***************
*** 10882,10888 ****
:nw=^M^J:sf=^J:ta=^I:..ts=\Ej\EYI%+ \Eo:tc=ibmega-c:
#
! # AIX entries. IBM ships these with AIX 3.2.5.
# -- added rc, sc based on manpage -TD
aixterm|IBM Aixterm Terminal Emulator:\
:es:hs:\
--- 10882,10888 ----
:nw=^M^J:sf=^J:ta=^I:..ts=\Ej\EYI%+ \Eo:tc=ibmega-c:
#
! # AIX entries. IBM ships these with AIX 3.2.5.
# -- added rc, sc based on manpage -TD
aixterm|IBM Aixterm Terminal Emulator:\
:es:hs:\
***************
*** 10937,10943 ****
# The ICL6402 was actually the Kokusai Display System 6402.
# The 6404 was the KDS7372 (color version of the 6402).
! #
# ICL6404 control codes follow:
#
#code function
--- 10937,10943 ----
# The ICL6402 was actually the Kokusai Display System 6402.
# The 6404 was the KDS7372 (color version of the 6402).
! #
# ICL6404 control codes follow:
#
#code function
***************
*** 11246,11258 ****
#### Kimtron (abm, kt)
#
! # Kimtron seems to be history, but as March 1998 these people are still
# offering repair services for Kimtron equipment:
#
# Com/Pair Monitor Service
# 1105 N. Cliff Ave.
# Sioux Falls, South Dakota 57103
! #
# WATS voice: 1-800/398-4946
# POTS fax: +1 605/338-8709
# POTS voice: +1 605/338-9650
--- 11246,11258 ----
#### Kimtron (abm, kt)
#
! # Kimtron seems to be history, but as March 1998 these people are still
# offering repair services for Kimtron equipment:
#
# Com/Pair Monitor Service
# 1105 N. Cliff Ave.
# Sioux Falls, South Dakota 57103
! #
# WATS voice: 1-800/398-4946
# POTS fax: +1 605/338-8709
# POTS voice: +1 605/338-9650
***************
*** 11346,11352 ****
# This was a line of terminals made by McDonnell-Douglas Information Systems.
# These entries come direct from MDIS documentation. I have edited them only
# to move primary names of the form p[0-9] * to aliases, and to comment out
! # :ae:/:as: in a couple of entries without <acsc> strings. I have
# also removed the change history; the last version indicates this is
# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
#
--- 11346,11352 ----
# This was a line of terminals made by McDonnell-Douglas Information Systems.
# These entries come direct from MDIS documentation. I have edited them only
# to move primary names of the form p[0-9] * to aliases, and to comment out
! # :ae:/:as: in a couple of entries without <acsc> strings. I have
# also removed the change history; the last version indicates this is
# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
#
***************
*** 11706,11712 ****
:al=\001:cd=^_:ce=^X:dl=\027:ta=\011:tc=mime3a:
# Wed Mar 9 18:53:21 1983
# We run our terminals at 2400 baud, so there might be some timing problems at
! # higher speeds. The major improvements in this model are the terminal now
# scrolls down and insert mode works without redrawing the rest of the line
# to the right of the cursor. This is done with a bit of a kludge using the
# exit graphics mode to get out of insert, but it does not appear to hurt
--- 11706,11712 ----
:al=\001:cd=^_:ce=^X:dl=\027:ta=\011:tc=mime3a:
# Wed Mar 9 18:53:21 1983
# We run our terminals at 2400 baud, so there might be some timing problems at
! # higher speeds. The major improvements in this model are the terminal now
# scrolls down and insert mode works without redrawing the rest of the line
# to the right of the cursor. This is done with a bit of a kludge using the
# exit graphics mode to get out of insert, but it does not appear to hurt
***************
*** 11748,11756 ****
# This entry works for the ergo 4000 with the following setups:
# ansi,wraparound,newline disabled, xon/xoff disabled in both
# setup a & c.
! #
# WARNING!!! There are multiple versions of ERGO 4000 microcode
! # Be advised that very early versions DO NOT WORK RIGHT !!
# Microterm does have a ROM exchange program- use it or lose big
# (ergo400: added <rmam>/<smam> based on the init string -- esr)
ergo4000|microterm ergo 4000:\
--- 11748,11756 ----
# This entry works for the ergo 4000 with the following setups:
# ansi,wraparound,newline disabled, xon/xoff disabled in both
# setup a & c.
! #
# WARNING!!! There are multiple versions of ERGO 4000 microcode
! # Be advised that very early versions DO NOT WORK RIGHT !!
# Microterm does have a ROM exchange program- use it or lose big
# (ergo400: added <rmam>/<smam> based on the init string -- esr)
ergo4000|microterm ergo 4000:\
***************
*** 11764,11770 ****
:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:me=\E[m:\
:nd=\E[C:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:up=\E[A:
! #### NCR
#
# NCR's terminal group was merged with AT&T's when AT&T bought the company.
# For what happened to that group, see the ADDS section.
--- 11764,11770 ----
:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:me=\E[m:\
:nd=\E[C:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:up=\E[A:
! #### NCR
#
# NCR's terminal group was merged with AT&T's when AT&T bought the company.
# For what happened to that group, see the ADDS section.
***************
*** 11800,11809 ****
# This definition for ViewPoint supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
! # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
! # attributes can be removed.
! # Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
--- 11800,11809 ----
# This definition for ViewPoint supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
! # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
! # attributes can be removed.
! # Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
***************
*** 11955,11973 ****
:is=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
:rs=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
:tc=ncr260vt300pp:
! # This terminfo file contains color capabilities for the Wyse325 emulation of
# the NCR 2900/260C color terminal. Because of the structure of the command
# (escape sequence) used to set color attributes, one of the fore/background
# colors must be preset to a given value. I have set the background color to
# black. The user can change this setup by altering the last section of the
! # 'setf' definition. The escape sequence to set color attributes is
! # ESC d y <foreground_color> <background_color> 1
# In addition, the background color can be changed through the desk
accessories.
! # The capablitiy 'op' sets colors to green on black (default combination).
#
# NOTE: The NCR Unix System Administrator's Shell will not function properly
# if the 'pairs' capability is defined. Un-Comment the 'pairs'
! # capability and recompile if you wish to have it included.
#
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
--- 11955,11973 ----
:is=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
:rs=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
:tc=ncr260vt300pp:
! # This terminfo file contains color capabilities for the Wyse325 emulation of
# the NCR 2900/260C color terminal. Because of the structure of the command
# (escape sequence) used to set color attributes, one of the fore/background
# colors must be preset to a given value. I have set the background color to
# black. The user can change this setup by altering the last section of the
! # 'setf' definition. The escape sequence to set color attributes is
! # ESC d y <foreground_color> <background_color> 1
# In addition, the background color can be changed through the desk
accessories.
! # The capablitiy 'op' sets colors to green on black (default combination).
#
# NOTE: The NCR Unix System Administrator's Shell will not function properly
# if the 'pairs' capability is defined. Un-Comment the 'pairs'
! # capability and recompile if you wish to have it included.
#
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
***************
*** 11997,12014 ****
# This definition for Wyse 350 supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
! # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
! # attributes can be removed.
! # Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
# In addition, color capabilities have been added to this file. The drawback,
# however, is that the background color has to be black. The foreground
colors
! # are numbered 0 through 15.
#
# NOTE: The NCR Unix System Administrator's Shell does not function properly
# with the 'pairs' capability defined as below. If you wish to
! # have it included, Un-comment it and recompile (using 'tic').
#
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
--- 11997,12014 ----
# This definition for Wyse 350 supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
! # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
! # attributes can be removed.
! # Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
# In addition, color capabilities have been added to this file. The drawback,
# however, is that the background color has to be black. The foreground
colors
! # are numbered 0 through 15.
#
# NOTE: The NCR Unix System Administrator's Shell does not function properly
# with the 'pairs' capability defined as below. If you wish to
! # have it included, Un-comment it and recompile (using 'tic').
#
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
***************
*** 12038,12049 ****
# This definition for Wyse 50+ supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
! # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
! # attributes can be removed.
! # Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
! # (ncr260wy50+pp: originally contained commented-out
# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there --
esr)
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
--- 12038,12049 ----
# This definition for Wyse 50+ supports several attributes. This means
# that it has magic cookies (extra spaces where the attributes begin).
# Some applications do not function well with magic cookies. The System
! # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
# If supporting various attributes is not vital, 'xmc#1' and the extra
! # attributes can be removed.
! # Mapping to ASCII character set ('acsc' capability) can also be
# restored if needed.
! # (ncr260wy50+pp: originally contained commented-out
# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there --
esr)
# (untranslatable capabilities removed to fit entry within 1023 bytes)
# (sgr removed to fit entry within 1023 bytes)
***************
*** 12163,12169 ****
# 6 - Don't Send or Do Send Spaces
# 7 - Parity Enable
# 8 - Stop Bits (One/Two)
! #
# Switch B:
# 1 - Upper/Lower Shift
# 2 - Typewriter Shift
--- 12163,12169 ----
# 6 - Don't Send or Do Send Spaces
# 7 - Parity Enable
# 8 - Stop Bits (One/Two)
! #
# Switch B:
# 1 - Upper/Lower Shift
# 2 - Typewriter Shift
***************
*** 12172,12178 ****
# 5-6 - Carriage Return Without / With Line Feed
# 7 - Extended Mode
# 8 - Suppress Keyboard Display
! #
# Switch C:
# 1 - End of line entry disabled/enabled
# 2 - Conversational mode / (Local?) Mode
--- 12172,12178 ----
# 5-6 - Carriage Return Without / With Line Feed
# 7 - Extended Mode
# 8 - Suppress Keyboard Display
! #
# Switch C:
# 1 - End of line entry disabled/enabled
# 2 - Conversational mode / (Local?) Mode
***************
*** 12182,12188 ****
# 6 - (50Hz?) / 60 Hz
# 7 - Exit after level zero diagnostics
# 8 - RS-232 interface
! #
# Switch D:
# 1 - Reverse Channel (yes / no)
# 2 - Manual answer (no / yes)
--- 12182,12188 ----
# 6 - (50Hz?) / 60 Hz
# 7 - Exit after level zero diagnostics
# 8 - RS-232 interface
! #
# Switch D:
# 1 - Reverse Channel (yes / no)
# 2 - Manual answer (no / yes)
***************
*** 12272,12278 ****
:k5=\ERF:k6=\ERG:k7=\ERH:k8=\ERI:k9=\ERJ:k;=\ERK:le=\ED:\
:nd=\EC:sf=^J:st=\E1:up=\EA:
# (pe7000m: this had
! # rmul=\E!\0, smul=\E!\040,
# which is probably wrong, it collides with kf0
pe7000m|perkin elmer 7000 series monochrome monitor:\
:am:\
--- 12272,12278 ----
:k5=\ERF:k6=\ERG:k7=\ERH:k8=\ERI:k9=\ERJ:k;=\ERK:le=\ED:\
:nd=\EC:sf=^J:st=\E1:up=\EA:
# (pe7000m: this had
! # rmul=\E!\0, smul=\E!\040,
# which is probably wrong, it collides with kf0
pe7000m|perkin elmer 7000 series monochrome monitor:\
:am:\
***************
*** 12292,12299 ****
# Sperry Univac has merged with Burroughs to form Unisys.
#
! # This entry is for the Sperry UTS30 terminal running the TTY
! # utility under control of CP/M Plus 1R1. The functionality
# provided is comparable to the DEC vt100.
# (uts30: I added <rmam>/<smam> based on the init string -- esr)
uts30|sperry uts30 with cp/address@hidden:\
--- 12292,12299 ----
# Sperry Univac has merged with Burroughs to form Unisys.
#
! # This entry is for the Sperry UTS30 terminal running the TTY
! # utility under control of CP/M Plus 1R1. The functionality
# provided is comparable to the DEC vt100.
# (uts30: I added <rmam>/<smam> based on the init string -- esr)
uts30|sperry uts30 with cp/address@hidden:\
***************
*** 12384,12390 ****
#### Tektronix (tek)
#
! # Tektronix tubes are graphics terminals. Most of them use modified
# oscilloscope technology incorporating a long-persistence green phosphor,
# and support vector graphics on a main screen with an attached "dialogue
# area" for interactive text.
--- 12384,12390 ----
#### Tektronix (tek)
#
! # Tektronix tubes are graphics terminals. Most of them use modified
# oscilloscope technology incorporating a long-persistence green phosphor,
# and support vector graphics on a main screen with an attached "dialogue
# area" for interactive text.
***************
*** 12428,12441 ****
# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
# on keyboard don't work. You have to hit BREAK twice to get
# one break at any speed - this is a documented feature.
! # Can't use cursor motion because it's memory relative, and
! # because it only works in the workspace, not the monitor.
# Same for home. Likewise, standout only works in the workspace.
! #
! # :ce: was commented out since vi and rogue seem to work better
# simulating it with lots of spaces!
! #
! # :al: and :AL: had 145ms of padding, but that slowed down vi's ^U
# and didn't seem necessary.
#
tek4024|tek4025|tek4027|tektronix 4024/4025/4027:\
--- 12428,12441 ----
# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
# on keyboard don't work. You have to hit BREAK twice to get
# one break at any speed - this is a documented feature.
! # Can't use cursor motion because it's memory relative, and
! # because it only works in the workspace, not the monitor.
# Same for home. Likewise, standout only works in the workspace.
! #
! # :ce: was commented out since vi and rogue seem to work better
# simulating it with lots of spaces!
! #
! # :al: and :AL: had 145ms of padding, but that slowed down vi's ^U
# and didn't seem necessary.
#
tek4024|tek4025|tek4027|tektronix 4024/4025/4027:\
***************
*** 12645,12658 ****
# look good for screen editing. In the dialog area, you can't move the cursor
# off the bottom line. Out of the dialog area, ^K moves it up, but there
# is no way to scroll.
! #
! # Note that there is a floppy for free from Tek that makes the
# 4112 emulate the vt52 (use the vt52 termcap). There is also
# an expected enhancement that will use ANSI standard sequences.
! #
! # 4112 in non-dialog area pretending to scroll. It really wraps
# but vi is said to work (more or less) in this mode.
! #
# 'vi' works reasonably well with this entry.
#
otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series:\
--- 12645,12658 ----
# look good for screen editing. In the dialog area, you can't move the cursor
# off the bottom line. Out of the dialog area, ^K moves it up, but there
# is no way to scroll.
! #
! # Note that there is a floppy for free from Tek that makes the
# 4112 emulate the vt52 (use the vt52 termcap). There is also
# an expected enhancement that will use ANSI standard sequences.
! #
! # 4112 in non-dialog area pretending to scroll. It really wraps
# but vi is said to work (more or less) in this mode.
! #
# 'vi' works reasonably well with this entry.
#
otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series:\
***************
*** 12687,12693 ****
tek4113-34|tektronix 4113 color graphics with 34 line dialog area:\
:li#34:\
:is=\EKA1\ELLB2\ELV0\ELV1:tc=tek4113:
! # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
# :vb: needs enough delay to let you see the background color being toggled.
tek4113-nd|tektronix 4113 color graphics with no dialog area:\
--- 12687,12693 ----
tek4113-34|tektronix 4113 color graphics with 34 line dialog area:\
:li#34:\
:is=\EKA1\ELLB2\ELV0\ELV1:tc=tek4113:
! # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
# :vb: needs enough delay to let you see the background color being toggled.
tek4113-nd|tektronix 4113 color graphics with no dialog area:\
***************
*** 12770,12778 ****
:te=\E[1;1H\E[0J\E[?6h\E[?1l:\
:ti=\E%\E!1\E[1;32r\E[?6l\E>:ue=\E[m:up=\E[A:us=\E[4m:
# Some unknown person wrote:
! # I added the is string - straight Unix has ESC ; in the login
! # string which sets a ct8500 into monitor mode (aka 4025 snoopy
! # mode). The is string here cleans up a few things (but not
# everything).
ct8500|tektronix ct8500:\
:am:bw:da:db:\
--- 12770,12778 ----
:te=\E[1;1H\E[0J\E[?6h\E[?1l:\
:ti=\E%\E!1\E[1;32r\E[?6l\E>:ue=\E[m:up=\E[A:us=\E[4m:
# Some unknown person wrote:
! # I added the is string - straight Unix has ESC ; in the login
! # string which sets a ct8500 into monitor mode (aka 4025 snoopy
! # mode). The is string here cleans up a few things (but not
# everything).
ct8500|tektronix ct8500:\
:am:bw:da:db:\
***************
*** 12792,12798 ****
# Bold, dim, and standout are simulated by colors and thus not allowed
# with colors. The tektronix color table is mapped into the RGB color
# table by setf/setb. All colors are reset to factory specifications by oc.
! # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
# interval then maps into pre-defined value.
# (untranslatable capabilities removed to fit entry within 1023 bytes)
--- 12792,12798 ----
# Bold, dim, and standout are simulated by colors and thus not allowed
# with colors. The tektronix color table is mapped into the RGB color
# table by setf/setb. All colors are reset to factory specifications by oc.
! # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
# interval then maps into pre-defined value.
# (untranslatable capabilities removed to fit entry within 1023 bytes)
***************
*** 12963,12969 ****
#### Apple II
#
! # Apple II firmware console first, then various 80-column cards and
# terminal emulators. For two cents I'd toss all these in the UFO file
# along with the 40-column apple entries.
#
--- 12963,12969 ----
#### Apple II
#
! # Apple II firmware console first, then various 80-column cards and
# terminal emulators. For two cents I'd toss all these in the UFO file
# along with the 40-column apple entries.
#
***************
*** 12971,12977 ****
# From: address@hidden (Brian R. Smith) via BRL
# 'it#8' tells UNIX that you have tabs every 8 columns. This is a
# function of TIC, not the firmware.
! # The clear key on a IIgs will do something like clear-screen,
# depending on what you're in.
appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface:\
:am:bs:bw:eo:ms:\
--- 12971,12977 ----
# From: address@hidden (Brian R. Smith) via BRL
# 'it#8' tells UNIX that you have tabs every 8 columns. This is a
# function of TIC, not the firmware.
! # The clear key on a IIgs will do something like clear-screen,
# depending on what you're in.
appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface:\
:am:bs:bw:eo:ms:\
***************
*** 13173,13192 ****
# line. Please note that non-ASCII characters don't work right in the
# status line, since Terminal.app incorrectly interprets their Unicode
# codepoints as MacRoman codepoints.
! #
# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
# "nsterm" to comply with the name length and case conventions and
# limitations of various software packages [notably Solaris terminfo
# and UNIX.] A single Apple_Terminal alias is retained for
# backwards-compatbility.
! #
# * Added function key support (F1-F4). These only work in Terminal.app
# version 51, hopefully the capabilities won't cause problems for people
# using version 41.
! #
# * Added "full color" (-c) entries which support the 16-color mode in
# version 51.
! #
# * By default, version 51 uses UTF-8 encoding with broken altcharset
# support, so "ASCII" (-7) entries without altcharset support were
# added.
--- 13173,13192 ----
# line. Please note that non-ASCII characters don't work right in the
# status line, since Terminal.app incorrectly interprets their Unicode
# codepoints as MacRoman codepoints.
! #
# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
# "nsterm" to comply with the name length and case conventions and
# limitations of various software packages [notably Solaris terminfo
# and UNIX.] A single Apple_Terminal alias is retained for
# backwards-compatbility.
! #
# * Added function key support (F1-F4). These only work in Terminal.app
# version 51, hopefully the capabilities won't cause problems for people
# using version 41.
! #
# * Added "full color" (-c) entries which support the 16-color mode in
# version 51.
! #
# * By default, version 51 uses UTF-8 encoding with broken altcharset
# support, so "ASCII" (-7) entries without altcharset support were
# added.
***************
*** 13719,13725 ****
:l0=f10:le=\ED:me=\Eq:nd=\EC:nw=^M^J:address@hidden:\
:rc=\Ek:sc=\Ej:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:te=:ti=\Ee:\
:up=\EA:ve=\Ee:vi=\Ef:
!
#### Commodore Business Machines
#
# Formerly located in West Chester, PA; went spectacularly bust in 1994
--- 13719,13725 ----
:l0=f10:le=\ED:me=\Eq:nd=\EC:nw=^M^J:address@hidden:\
:rc=\Ek:sc=\Ej:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:te=:ti=\Ee:\
:up=\EA:ve=\Ee:vi=\Ef:
!
#### Commodore Business Machines
#
# Formerly located in West Chester, PA; went spectacularly bust in 1994
***************
*** 13840,13855 ****
#### Osborne
#
# Thu Jul 7 03:55:16 1983
! #
! # As an aside, be careful; it may sound like an anomaly on the
! # Osborne, but with the 80-column upgrade, it's too easy to
# enter lines >80 columns!
! #
# I've already had several comments...
! # The Osborne-1 with the 80-col option is capable of being
! # 52, 80, or 104 characters wide; default to 80 for compatibility
# with most systems.
! #
# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
osborne-w|osborne1-w|osborne I in 104-column mode:\
:ms:ul:xt:\
--- 13840,13855 ----
#### Osborne
#
# Thu Jul 7 03:55:16 1983
! #
! # As an aside, be careful; it may sound like an anomaly on the
! # Osborne, but with the 80-column upgrade, it's too easy to
# enter lines >80 columns!
! #
# I've already had several comments...
! # The Osborne-1 with the 80-col option is capable of being
! # 52, 80, or 104 characters wide; default to 80 for compatibility
# with most systems.
! #
# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
osborne-w|osborne1-w|osborne I in 104-column mode:\
:ms:ul:xt:\
***************
*** 13886,13892 ****
# Memory-segmentation limits and a strong tendency to look like V7 long after
# it was obsolete made all three pretty lame. Venix croaked early. Coherent
# and Minix were ported to 32-bit Intel boxes, only to be run over by a
! # steamroller named `Linux' (which, to be fair, traces some lineage to
Minix).
# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
# are also, I'm told, Minix ports that ran on Amiga and Atari machines and
# even as single processes under SunOS and the Macintosh OS.
--- 13886,13892 ----
# Memory-segmentation limits and a strong tendency to look like V7 long after
# it was obsolete made all three pretty lame. Venix croaked early. Coherent
# and Minix were ported to 32-bit Intel boxes, only to be run over by a
! # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
# are also, I'm told, Minix ports that ran on Amiga and Atari machines and
# even as single processes under SunOS and the Macintosh OS.
***************
*** 13938,13944 ****
:sr=\EI:ta=^I:up=\EA:
# According to the Venix 1.1 manual, the PC console is similar
! # to a DEC vt52. Differences seem to be (1) arrow keys send
# different strings, (2) enhanced standout, (3) added insert/delete line.
# Note in particular that it doesn't have automatic margins.
# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
--- 13938,13944 ----
:sr=\EI:ta=^I:up=\EA:
# According to the Venix 1.1 manual, the PC console is similar
! # to a DEC vt52. Differences seem to be (1) arrow keys send
# different strings, (2) enhanced standout, (3) added insert/delete line.
# Note in particular that it doesn't have automatic margins.
# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
***************
*** 13955,13965 ****
#
# The MAI Basic Four computer was obsolete at the end of the 1980s.
! # It may be used as a terminal by putting it in "line" mode as seen on
# one of the status lines.
! # Initialization is similar to CIT80. :is: will set ANSI mode for you.
# Hardware tabs set by :if: at 8-spacing. Auto line wrap causes glitches so
! # wrap mode is reset by :vs:. Using :sf:=\E[S caused errors so I
# used \ED instead.
# From: address@hidden (David Lawyer), 28 Jun 1997
mai|basic4|MAI Basic Four in ansi mode:\
--- 13955,13965 ----
#
# The MAI Basic Four computer was obsolete at the end of the 1980s.
! # It may be used as a terminal by putting it in "line" mode as seen on
# one of the status lines.
! # Initialization is similar to CIT80. :is: will set ANSI mode for you.
# Hardware tabs set by :if: at 8-spacing. Auto line wrap causes glitches so
! # wrap mode is reset by :vs:. Using :sf:=\E[S caused errors so I
# used \ED instead.
# From: address@hidden (David Lawyer), 28 Jun 1997
mai|basic4|MAI Basic Four in ansi mode:\
***************
*** 13979,13985 ****
#
# On Sat, 7 Aug 1999, Torsten Jerzembeck <address@hidden> wrote:
# The Basis 108 was a Apple II clone, manufactured by the "Basis
! # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
# about 1,5 km from where I live, but doesn't build own computers any
# more). A Basis 108 featured a really heavy (cast aluminium?) case, was
# equipped with one or two 5.25" disk drives, had a monochrome and colour
--- 13979,13985 ----
#
# On Sat, 7 Aug 1999, Torsten Jerzembeck <address@hidden> wrote:
# The Basis 108 was a Apple II clone, manufactured by the "Basis
! # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
# about 1,5 km from where I live, but doesn't build own computers any
# more). A Basis 108 featured a really heavy (cast aluminium?) case, was
# equipped with one or two 5.25" disk drives, had a monochrome and colour
***************
*** 13999,14005 ****
megatek|pegasus workstation terminal emulator:\
:am:os:\
:co#83:li#60:
! # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
# interface (pre-Macintosh by several years) that went nowhere.
xerox820|x820|Xerox 820:\
:am:\
--- 13999,14005 ----
megatek|pegasus workstation terminal emulator:\
:am:os:\
:co#83:li#60:
! # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
# interface (pre-Macintosh by several years) that went nowhere.
xerox820|x820|Xerox 820:\
:am:\
***************
*** 14090,14096 ****
#### Bell Labs blit terminals
#
! # These were AT&T's official entries. The 5620 FAQ maintained by
# David Breneman <address@hidden> has this to say:
#
# Actually, in the beginning was the Jerq, and the Jerq was white with a
--- 14090,14096 ----
#### Bell Labs blit terminals
#
! # These were AT&T's official entries. The 5620 FAQ maintained by
# David Breneman <address@hidden> has this to say:
#
# Actually, in the beginning was the Jerq, and the Jerq was white with a
***************
*** 14149,14165 ****
# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
# Beranek and Neuman) sold at most a few hundred of them to the real
# world. DOD may have bought more...
! #
! # Entries for the BitGraph terminals. The problem
! # with scrolling in vi can only be fixed by getting BBN to put
! # smarter scroll logic in the terminal or changing vi or padding
# scrolls with about 500 ms delay.
! #
! # I always thought the problem was related to the terminal
! # counting newlines in its input buffer before scrolling and
! # then moving the screen that much. Then vi comes along and
! # paints lines in on the bottom line of the screen, so you get
# this big white gap.
bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video):\
--- 14149,14165 ----
# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
# Beranek and Neuman) sold at most a few hundred of them to the real
# world. DOD may have bought more...
! #
! # Entries for the BitGraph terminals. The problem
! # with scrolling in vi can only be fixed by getting BBN to put
! # smarter scroll logic in the terminal or changing vi or padding
# scrolls with about 500 ms delay.
! #
! # I always thought the problem was related to the terminal
! # counting newlines in its input buffer before scrolling and
! # then moving the screen that much. Then vi comes along and
! # paints lines in on the bottom line of the screen, so you get
# this big white gap.
bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video):\
***************
*** 14302,14318 ****
# Copyright (c) 1989 BULL SA
#---------------------------------------------------------------------------
# This entry is used for terminals with vt320 emulation mode
! # and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
! # 7 bit Control Characters,
! # 80 columns screen.
# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
# They are used in string capabilities with vt220-320 emulation mode.
# In the following DEC definitions, two kinds of terminfo databases are
# provided :
! # 1. the first with Command Sequence Introducer starting with escape
# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
! # 2. the second with Command Sequence Introducer starting with escape
# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
# Soft Terminal Reset esc [ ! p
# RIS (erases screen): esc c
--- 14302,14318 ----
# Copyright (c) 1989 BULL SA
#---------------------------------------------------------------------------
# This entry is used for terminals with vt320 emulation mode
! # and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
! # 7 bit Control Characters,
! # 80 columns screen.
# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
# They are used in string capabilities with vt220-320 emulation mode.
# In the following DEC definitions, two kinds of terminfo databases are
# provided :
! # 1. the first with Command Sequence Introducer starting with escape
# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
! # 2. the second with Command Sequence Introducer starting with escape
# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
# Soft Terminal Reset esc [ ! p
# RIS (erases screen): esc c
***************
*** 14347,14357 ****
# RM DECAWM auto right margin: esc [ ? 7 l
# SM DECARM auto repeat: esc [ ? 8 h
# RM DECARM auto repeat: esc [ ? 8 l
! # DECSASD Select active main: esc [ 0 $ }
! # DECSASD Select active status: esc [ 1 $ }
! # DECSSDT Select status none: esc [ 0 $ ~
! # DECSSDT Select status indic.: esc [ 1 $ ~
! # DECSSDT Select status host-wr: esc [ 2 $ ~
# SM DECTCEM Visible cursor: esc [ ? 2 5 h
# RM DECTCEM Invisible cursor: esc [ ? 2 5 l
# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
--- 14347,14357 ----
# RM DECAWM auto right margin: esc [ ? 7 l
# SM DECARM auto repeat: esc [ ? 8 h
# RM DECARM auto repeat: esc [ ? 8 l
! # DECSASD Select active main: esc [ 0 $ }
! # DECSASD Select active status: esc [ 1 $ }
! # DECSSDT Select status none: esc [ 0 $ ~
! # DECSSDT Select status indic.: esc [ 1 $ ~
! # DECSSDT Select status host-wr: esc [ 2 $ ~
# SM DECTCEM Visible cursor: esc [ ? 2 5 h
# RM DECTCEM Invisible cursor: esc [ ? 2 5 l
# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
***************
*** 14407,14416 ****
:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300:
# This entry is used for terminals with vt320 emulation mode
! # and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 8 bit Control Characters, (CSI coded as x9B for ESC [)
! # 80 columns screen.
# Soft Terminal Reset csi ! p
# RIS (erases screen): esc c
# DECKPNM numeric keypad mode: esc >
--- 14407,14416 ----
:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300:
# This entry is used for terminals with vt320 emulation mode
! # and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 8 bit Control Characters, (CSI coded as x9B for ESC [)
! # 80 columns screen.
# Soft Terminal Reset csi ! p
# RIS (erases screen): esc c
# DECKPNM numeric keypad mode: esc >
***************
*** 14444,14454 ****
# RM DECAWM auto right margin: csi ? 7 l
# SM DECARM auto repeat: csi ? 8 h
# RM DECARM auto repeat: csi ? 8 l
! # DECSASD Select active main: csi 0 $ }
! # DECSASD Select active status: csi 1 $ }
! # DECSSDT Select status none: csi 0 $ ~
! # DECSSDT Select status indic.: csi 1 $ ~
! # DECSSDT Select status host-wr: csi 2 $ ~
# SM DECTCEM Visible cursor: csi ? 2 5 h
# RM DECTCEM Invisible cursor: csi ? 2 5 l
# SM DECNCRM 7 bits NCR set: csi ? 4 2 h
--- 14444,14454 ----
# RM DECAWM auto right margin: csi ? 7 l
# SM DECARM auto repeat: csi ? 8 h
# RM DECARM auto repeat: csi ? 8 l
! # DECSASD Select active main: csi 0 $ }
! # DECSASD Select active status: csi 1 $ }
! # DECSSDT Select status none: csi 0 $ ~
! # DECSSDT Select status indic.: csi 1 $ ~
! # DECSSDT Select status host-wr: csi 2 $ ~
# SM DECTCEM Visible cursor: csi ? 2 5 h
# RM DECTCEM Invisible cursor: csi ? 2 5 l
# SM DECNCRM 7 bits NCR set: csi ? 4 2 h
***************
*** 14498,14507 ****
:rs=\233?3h:vb=\233?5l\233?5h:tc=bq300-8:
# This entry is used for terminals with vt320 emulation mode
! # a 102 keys keyboard (PC scancode !) and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
! # 7 bit Control Characters,
! # 80 columns screen.
bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns:\
:%0@:%1@:*6@:@0@:@7=\E[4~:F1=\E[29~:F2=\E[31~:F3@:F4@:F5@:F6@:\
:F7@:F8@:F9@:FA@:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\
--- 14498,14507 ----
:rs=\233?3h:vb=\233?5l\233?5h:tc=bq300-8:
# This entry is used for terminals with vt320 emulation mode
! # a 102 keys keyboard (PC scancode !) and following set-up :
# 8 bit ISO Latin Character Set (ISO 8859-1),
! # 7 bit Control Characters,
! # 80 columns screen.
bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns:\
:%0@:%1@:*6@:@0@:@7=\E[4~:F1=\E[29~:F2=\E[31~:F3@:F4@:F5@:F6@:\
:F7@:F8@:F9@:FA@:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\
***************
*** 14520,14527 ****
:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300-pc:
# 8 bit ISO Latin Character Set (ISO 8859-1),
! # 8 bit Control Characters,
! # 80 columns screen.
bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns:\
:%0@:%1@:*6@:@0@:@7=\2334~:F1=\23329~:F2=\23331~:F3@:F4@:F5@:\
:F6@:F7@:F8@:F9@:FA@:k1=\23317~:k2=\23318~:k3=\23319~:\
--- 14520,14527 ----
:is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
:rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300-pc:
# 8 bit ISO Latin Character Set (ISO 8859-1),
! # 8 bit Control Characters,
! # 80 columns screen.
bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns:\
:%0@:%1@:*6@:@0@:@7=\2334~:F1=\23329~:F2=\23331~:F3@:F4@:F5@:\
:F6@:F7@:F8@:F9@:FA@:k1=\23317~:k2=\23318~:k3=\23319~:\
***************
*** 14629,14641 ****
#### Chromatics
#
! # I have put the long strings in :ti:/:te:. Ti sets up a window
! # that is smaller than the screen, and puts up a warning message
! # outside the window. Te erases the warning message, puts the
# window back to be the whole screen, and puts the cursor at just
! # below the small window. I defined :ve: and :vi: to really turn
! # the cursor on and off, but I have taken this out since I don't
! # like the cursor being turned off when vi exits.
cg7900|chromatics|chromatics 7900:\
:am:\
:co#80:li#40:\
--- 14629,14641 ----
#### Chromatics
#
! # I have put the long strings in :ti:/:te:. Ti sets up a window
! # that is smaller than the screen, and puts up a warning message
! # outside the window. Te erases the warning message, puts the
# window back to be the whole screen, and puts the cursor at just
! # below the small window. I defined :ve: and :vi: to really turn
! # the cursor on and off, but I have taken this out since I don't
! # like the cursor being turned off when vi exits.
cg7900|chromatics|chromatics 7900:\
:am:\
:co#80:li#40:\
***************
*** 14688,14704 ****
:sf=^J:up=^Z:
# From: Jan Willem Stumpel <address@hidden>, 11 May 1997
! # The Datapoint 8242 Workstation was sold at least between 1985
! # and 1989. To make the terminal work with this entry, press
! # CONTROL-INT-INT to take the terminal off-line, and type (opt).
! # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
! # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
# fact unusable because the strings sent by the terminal conflict
# with other keys).
# The terminal is capable of displaying "box draw" characters.
! # For each graphic character you must send 2 ESC's (\E\E) followed
! # by a control character as follows:
# character meaning
# ========= =======
# ctrl-E top tee
--- 14688,14704 ----
:sf=^J:up=^Z:
# From: Jan Willem Stumpel <address@hidden>, 11 May 1997
! # The Datapoint 8242 Workstation was sold at least between 1985
! # and 1989. To make the terminal work with this entry, press
! # CONTROL-INT-INT to take the terminal off-line, and type (opt).
! # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
! # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
# fact unusable because the strings sent by the terminal conflict
# with other keys).
# The terminal is capable of displaying "box draw" characters.
! # For each graphic character you must send 2 ESC's (\E\E) followed
! # by a control character as follows:
# character meaning
# ========= =======
# ctrl-E top tee
***************
*** 14712,14719 ****
# ctrl-M bottom right corner
# ctrl-N horizontal line
# ctrl-O vertical line
! # Unfortunately this cannot be fitted into the termcap/terminfo
! # description scheme.
dp8242|datapoint 8242:\
:ms:\
:co#80:li#25:\
--- 14712,14719 ----
# ctrl-M bottom right corner
# ctrl-N horizontal line
# ctrl-O vertical line
! # Unfortunately this cannot be fitted into the termcap/terminfo
! # description scheme.
dp8242|datapoint 8242:\
:ms:\
:co#80:li#25:\
***************
*** 14732,14738 ****
#
# These entries are DEC's official terminfos for its older terminals.
# Contact Bill Hedberg <address@hidden> of Terminal Support
! # Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
--- 14732,14738 ----
#
# These entries are DEC's official terminfos for its older terminals.
# Contact Bill Hedberg <address@hidden> of Terminal Support
! # Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
***************
*** 14808,14814 ****
# \E[4g clear vertical tab stops
# \E> disable alternate keypad mode (so it transmits numbers!)
# \E[%i%p1%du set tab stop at column %d (origin == 1)
! # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
# a tab stop)
#
# The dw3 does standout with wide characters.
--- 14808,14814 ----
# \E[4g clear vertical tab stops
# \E> disable alternate keypad mode (so it transmits numbers!)
# \E[%i%p1%du set tab stop at column %d (origin == 1)
! # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
# a tab stop)
#
# The dw3 does standout with wide characters.
***************
*** 14900,14921 ****
#
# S401
# 0-3 = baud rate as follows:
! #
# 3 2 1 0
! # --- --- --- ---
# 0 0 1 1 300 baud
# 0 1 0 1 1200 baud
# 1 0 0 0 2400 baud
# 1 0 1 0 4800 baud
# 1 1 0 0 9600 baud
# 1 1 0 1 19.2K baud
! #
# 4 = parity (0 = no parity)
# 5 = even parity (0 = odd parity)
# 6 = stick parity (0 = normal parity)
# 7 = full duplex (0 = half duplex)
! #
! # S402
# 0 = block cursor (0 = underscore cursor)
# 1 = no key click (0 = keyclick)
# 2 = wrap at end of line (0 = no wrap)
--- 14900,14921 ----
#
# S401
# 0-3 = baud rate as follows:
! #
# 3 2 1 0
! # --- --- --- ---
# 0 0 1 1 300 baud
# 0 1 0 1 1200 baud
# 1 0 0 0 2400 baud
# 1 0 1 0 4800 baud
# 1 1 0 0 9600 baud
# 1 1 0 1 19.2K baud
! #
# 4 = parity (0 = no parity)
# 5 = even parity (0 = odd parity)
# 6 = stick parity (0 = normal parity)
# 7 = full duplex (0 = half duplex)
! #
! # S402
# 0 = block cursor (0 = underscore cursor)
# 1 = no key click (0 = keyclick)
# 2 = wrap at end of line (0 = no wrap)
***************
*** 14924,14930 ****
# 5 = ANSI mode (0 = VT52 mode)
# 6 = keypad shifted (0 = keypad unshifted)
# 7 = 50Hz refresh (1 = 60Hz refresh)
! #
# Factory Default settings are as follows:
# 7 6 5 4 3 2 1 0
# S401 1 0 0 0 1 1 0 0
--- 14924,14930 ----
# 5 = ANSI mode (0 = VT52 mode)
# 6 = keypad shifted (0 = keypad unshifted)
# 7 = 50Hz refresh (1 = 60Hz refresh)
! #
# Factory Default settings are as follows:
# 7 6 5 4 3 2 1 0
# S401 1 0 0 0 1 1 0 0
***************
*** 14948,14961 ****
:ke=\Eu:ks=\Et:tc=h19-u:
# (h19: merged in :ip: from BSDI hp19-e entry>;
# also added empty <acsc> to suppress a tic warning --esr)
! # From: Tim Pierce <address@hidden>, 23 Feb 1998
# Tim tells us that:
# I have an old Zenith-19 terminal at home that still gets a lot of use.
# This terminal suffers from the same famous insert-mode padding lossage
# that has been acknowledged for the Z29 terminal. Emacs is nearly
# unusable on this box, since even a half-scroll up or down the window
# causes flaming terminal death.
! #
# On the Z19, the only way I have found around this problem is to remove
# the :al: and :dl: entries entirely. No amount of extra padding will
# help (I have tried up to 20000). Removing :al=\EL$: and :dl=\EM$:
--- 14948,14961 ----
:ke=\Eu:ks=\Et:tc=h19-u:
# (h19: merged in :ip: from BSDI hp19-e entry>;
# also added empty <acsc> to suppress a tic warning --esr)
! # From: Tim Pierce <address@hidden>, 23 Feb 1998
# Tim tells us that:
# I have an old Zenith-19 terminal at home that still gets a lot of use.
# This terminal suffers from the same famous insert-mode padding lossage
# that has been acknowledged for the Z29 terminal. Emacs is nearly
# unusable on this box, since even a half-scroll up or down the window
# causes flaming terminal death.
! #
# On the Z19, the only way I have found around this problem is to remove
# the :al: and :dl: entries entirely. No amount of extra padding will
# help (I have tried up to 20000). Removing :al=\EL$: and :dl=\EM$:
***************
*** 14985,15021 ****
# it needs more padding. It especially loses if a program attempts
# to put the Z29 into insert mode and insert text at 9600 baud. It
# even loses worse if the program attempts to insert tabs at 9600
! # baud. Adding padding to text that is inserted loses because in
# order to make the Z29 not die, one must add so much padding that
! # whenever the program tries to use insert mode, the effective
# rate is about 110 baud.
! #
! # What program would want to put the terminal into insert mode
! # and shove stuff at it at 9600 baud you ask?
! #
! # Emacs. Emacs seems to want to do the mathematically optimal
# thing in doing a redisplay rather than the practical thing.
! # When it is about to output a line on top of a line that is
! # already on the screen, instead of just killing to the end of
! # the line and outputting the new line, it compares the old line
! # and the new line and if there are any similarities, it
! # constructs the new line by deleting the text on the old line
# on the terminal that is already there and then inserting new
! # text into the line to transform it into the new line that is
# to be displayed. The Z29 does not react kindly to this.
! #
# But don't cry for too long.... There is a solution. You can make
# a termcap entry for the Z29 that says the Z29 has no insert mode.
! # Then Emacs cannot use it. "Oh, no, but now inserting into a
# line will be really slow", you say. Well there is a sort of a
! # solution to that too. There is an insert character option on
! # the Z29 that will insert one character. Unfortunately, it
! # involves putting the terminal into ansi mode, inserting the
! # character, and changing it back to H19 mode. All this takes 12
! # characters. Pretty expensive to insert one character, but it
! # works. Either Emacs doesn't try to use its inserting hack when
! # it's only given an insert character ability or the Z29 doesn't
! # require padding with this (the former is probably more likely,
# but I haven't checked it out).
# (z29: added empty <acsc> to suppress a tic warning, merged in
# status line capabilities from BRL entry --esr)
--- 14985,15021 ----
# it needs more padding. It especially loses if a program attempts
# to put the Z29 into insert mode and insert text at 9600 baud. It
# even loses worse if the program attempts to insert tabs at 9600
! # baud. Adding padding to text that is inserted loses because in
# order to make the Z29 not die, one must add so much padding that
! # whenever the program tries to use insert mode, the effective
# rate is about 110 baud.
! #
! # What program would want to put the terminal into insert mode
! # and shove stuff at it at 9600 baud you ask?
! #
! # Emacs. Emacs seems to want to do the mathematically optimal
# thing in doing a redisplay rather than the practical thing.
! # When it is about to output a line on top of a line that is
! # already on the screen, instead of just killing to the end of
! # the line and outputting the new line, it compares the old line
! # and the new line and if there are any similarities, it
! # constructs the new line by deleting the text on the old line
# on the terminal that is already there and then inserting new
! # text into the line to transform it into the new line that is
# to be displayed. The Z29 does not react kindly to this.
! #
# But don't cry for too long.... There is a solution. You can make
# a termcap entry for the Z29 that says the Z29 has no insert mode.
! # Then Emacs cannot use it. "Oh, no, but now inserting into a
# line will be really slow", you say. Well there is a sort of a
! # solution to that too. There is an insert character option on
! # the Z29 that will insert one character. Unfortunately, it
! # involves putting the terminal into ansi mode, inserting the
! # character, and changing it back to H19 mode. All this takes 12
! # characters. Pretty expensive to insert one character, but it
! # works. Either Emacs doesn't try to use its inserting hack when
! # it's only given an insert character ability or the Z29 doesn't
! # require padding with this (the former is probably more likely,
# but I haven't checked it out).
# (z29: added empty <acsc> to suppress a tic warning, merged in
# status line capabilities from BRL entry --esr)
***************
*** 15113,15121 ****
#### IMS International (ims)
#
! # There was a company called IMS International located in Carson City,
# Nevada, that flourished from the mid-70s to mid-80s. They made S-100
! # bus/Z80 hardware and a line of terminals called Ultimas.
#
# From: Erik Fair <address@hidden> Sun Oct 27 07:21:05 1985
--- 15113,15121 ----
#### IMS International (ims)
#
! # There was a company called IMS International located in Carson City,
# Nevada, that flourished from the mid-70s to mid-80s. They made S-100
! # bus/Z80 hardware and a line of terminals called Ultimas.
#
# From: Erik Fair <address@hidden> Sun Oct 27 07:21:05 1985
***************
*** 15153,15159 ****
:bc=^U:bl=^G:cd=\E~k<10*>:ce=\E~K:cl=\014:cm=\EY%+ %+ :\
:cr=^M:do=^J:kd=^J:kl=^U:kr=^F:ku=^K:le=^H:nd=^F:sf=^J:ta=^I:\
:te=^L:ti=^L:up=^K:
! # (intertube: a Gould entry via BRL asserted address@hidden<200/>,
# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
# and the reverse is actually true. Try it. -- esr)
intertube|intertec|Intertec InterTube:\
--- 15153,15159 ----
:bc=^U:bl=^G:cd=\E~k<10*>:ce=\E~K:cl=\014:cm=\EY%+ %+ :\
:cr=^M:do=^J:kd=^J:kl=^U:kr=^F:ku=^K:le=^H:nd=^F:sf=^J:ta=^I:\
:te=^L:ti=^L:up=^K:
! # (intertube: a Gould entry via BRL asserted address@hidden<200/>,
# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
# and the reverse is actually true. Try it. -- esr)
intertube|intertec|Intertec InterTube:\
***************
*** 15182,15193 ****
#
# The Graphos III was a color graphics terminal from Ithaca Intersystems.
! # These entries were written (originally in termcap syntax) by Brian Yandell
! # <address@hidden> and Mike Meyer <address@hidden> at the
# University of Wisconsin.
! # (graphos: removed obsolete and syntactically incorrect :kn=4:,
! # removed :if=/usr/share/tabset/init.graphos: and
# <rf=/usr/share/tabset/init.graphos> no such file & no :st: -- esr)
graphos|graphos III:\
:am:mi:\
--- 15182,15193 ----
#
# The Graphos III was a color graphics terminal from Ithaca Intersystems.
! # These entries were written (originally in termcap syntax) by Brian Yandell
! # <address@hidden> and Mike Meyer <address@hidden> at the
# University of Wisconsin.
! # (graphos: removed obsolete and syntactically incorrect :kn=4:,
! # removed :if=/usr/share/tabset/init.graphos: and
# <rf=/usr/share/tabset/init.graphos> no such file & no :st: -- esr)
graphos|graphos III:\
:am:mi:\
***************
*** 15215,15221 ****
# Vox: (617)-890-5796.
#
# However, if you call that number today you'll get an insurance company.
! # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
# 26 Feb 1997 that says:
#
# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have
been
--- 15215,15221 ----
# Vox: (617)-890-5796.
#
# However, if you call that number today you'll get an insurance company.
! # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
# 26 Feb 1997 that says:
#
# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have
been
***************
*** 15266,15272 ****
:us=\E[4m:vb=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q:
#### Morrow Designs
! #
# This was George Morrow's company. They started in the late 1970s making
# S100-bus machines. They used to be reachable at:
#
--- 15266,15272 ----
:us=\E[4m:vb=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q:
#### Morrow Designs
! #
# This was George Morrow's company. They started in the late 1970s making
# S100-bus machines. They used to be reachable at:
#
***************
*** 15277,15283 ****
# but they're long gone now (1995).
#
! # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
# Jeff's specimen was dated June 1984.
# From: Jeff Wieland <address@hidden> 24 Feb 1995
mt70|mt-70|Morrow MD-70; native Morrow mode:\
--- 15277,15283 ----
# but they're long gone now (1995).
#
! # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
# Jeff's specimen was dated June 1984.
# From: Jeff Wieland <address@hidden> 24 Feb 1995
mt70|mt-70|Morrow MD-70; native Morrow mode:\
***************
*** 15417,15433 ****
# consisted of a circle with a slightly smaller 15 degree (approx.)
# wedge with rounded corners inside it. The color was sort of
# a metallic gold/yellow.
! #
# If I had been more of a beer drinker it might have been obvious
# to me, but it took a clue from their service department to make
# me exclaim, "Of course!" The circular object was the top of
# a beer can (the old removable pop-top style) and "Soroc" was an
# anagram for "Coors".
! #
# I can just imagine the founders of the company sitting around
# one evening, tossing back a few and trying to decide what to
# call their new company and what to use for a logo.
! #
# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
soroc120|iq120|soroc|soroc iq120:\
--- 15417,15433 ----
# consisted of a circle with a slightly smaller 15 degree (approx.)
# wedge with rounded corners inside it. The color was sort of
# a metallic gold/yellow.
! #
# If I had been more of a beer drinker it might have been obvious
# to me, but it took a clue from their service department to make
# me exclaim, "Of course!" The circular object was the top of
# a beer can (the old removable pop-top style) and "Soroc" was an
# anagram for "Coors".
! #
# I can just imagine the founders of the company sitting around
# one evening, tossing back a few and trying to decide what to
# call their new company and what to use for a logo.
! #
# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
soroc120|iq120|soroc|soroc iq120:\
***************
*** 15444,15450 ****
#### Southwest Technical Products
#
! # These guys made an early personal micro called the M6800.
# The ct82 was probably its console terminal.
#
--- 15444,15450 ----
#### Southwest Technical Products
#
! # These guys made an early personal micro called the M6800.
# The ct82 was probably its console terminal.
#
***************
*** 15483,15489 ****
# CRT). It wasn't much different from the KTM-2 hardware-wise, but the
# control and escape sequences are very different. The KTM-3 was always
# real broken, at least according to the folks I've talked to about it.
! #
# The padding in the entry is probably off--these terminals were very
# slow (it takes like 100ms for the KTM-2 to clear the screen...) And
# anyone with any sanity replaced the ROMs with something that provided
--- 15483,15489 ----
# CRT). It wasn't much different from the KTM-2 hardware-wise, but the
# control and escape sequences are very different. The KTM-3 was always
# real broken, at least according to the folks I've talked to about it.
! #
# The padding in the entry is probably off--these terminals were very
# slow (it takes like 100ms for the KTM-2 to clear the screen...) And
# anyone with any sanity replaced the ROMs with something that provided
***************
*** 15491,15497 ****
# obviously very primitive... oh, you could get an upgraded ROM from
# Synertek for some incredible amount of money, but what hacker with an
# EPROM burner would do that? :)
! #
# Sorry I don't have any contact info; I believe they were located in
# Sunnyvale, and I'm fairly sure they are still manufacturing ICs
# (they've gone to ASICs and FPGAs), but I doubt they're in the computer
--- 15491,15497 ----
# obviously very primitive... oh, you could get an upgraded ROM from
# Synertek for some incredible amount of money, but what hacker with an
# EPROM burner would do that? :)
! #
# Sorry I don't have any contact info; I believe they were located in
# Sunnyvale, and I'm fairly sure they are still manufacturing ICs
# (they've gone to ASICs and FPGAs), but I doubt they're in the computer
***************
*** 15725,15731 ****
#
# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
! # had just :so:=\EG6 which I think means standout was supposed to be
# dim-reverse using ADM12-style attributes. ADM12 :us:/:ue: and
# <invis> might work-- esr)
zen30|z30|zentec 30:\
--- 15725,15731 ----
#
# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
! # had just :so:=\EG6 which I think means standout was supposed to be
# dim-reverse using ADM12-style attributes. ADM12 :us:/:ue: and
# <invis> might work-- esr)
zen30|z30|zentec 30:\
***************
*** 15761,15767 ****
#### Apollo consoles
#
! # Apollo got bought by Hewlett-Packard. The Apollo workstations are
# labeled HP700s now.
#
--- 15761,15767 ----
#### Apollo consoles
#
! # Apollo got bought by Hewlett-Packard. The Apollo workstations are
# labeled HP700s now.
#
***************
*** 15844,15850 ****
# to force both magic cookie glitches off. Once upon a time, I
# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
# function keys; thus the "Al" value for HM was certainly an error. I renamed
! # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
--- 15844,15850 ----
# to force both magic cookie glitches off. Once upon a time, I
# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
# function keys; thus the "Al" value for HM was certainly an error. I renamed
! # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
***************
*** 15890,15896 ****
#
# CTRM terminal emulator
! # 1. underlining is not allowed with colors: first, is is simulated by
# black on white, second, it disables background color manipulations.
# 2. BLINKING, REVERSE and BOLD are allowed with colors,
# so we have to save their status in the static registers A, B and H
--- 15890,15896 ----
#
# CTRM terminal emulator
! # 1. underlining is not allowed with colors: first, is is simulated by
# black on white, second, it disables background color manipulations.
# 2. BLINKING, REVERSE and BOLD are allowed with colors,
# so we have to save their status in the static registers A, B and H
***************
*** 15898,15904 ****
# (because any color change turns off ALL attributes)
# 3. :md: and :mr: sequences alternate modes,
# rather then simply entering them. Thus we have to check the
! # static register B and H to determine the status, before sending the
# escape sequence.
# 4. :me: now must set the status of all 3 register (A,B,H) to zero
# and then reset colors
--- 15898,15904 ----
# (because any color change turns off ALL attributes)
# 3. :md: and :mr: sequences alternate modes,
# rather then simply entering them. Thus we have to check the
! # static register B and H to determine the status, before sending the
# escape sequence.
# 4. :me: now must set the status of all 3 register (A,B,H) to zero
# and then reset colors
***************
*** 16022,16028 ****
# (diablo1640: removed :if=/usr/share/tabset/xerox1730:, no such file -- esr)
diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640:\
:bl=^G:se=\E&:so=\EW:ue=\ER:us=\EE:tc=diablo1620:
! # (diablo1640-lm: removed :if=/usr/share/tabset/xerox1730-lm:, no such
# file -- esr)
diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin:\
:co#124:\
--- 16022,16028 ----
# (diablo1640: removed :if=/usr/share/tabset/xerox1730:, no such file -- esr)
diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640:\
:bl=^G:se=\E&:so=\EW:ue=\ER:us=\EE:tc=diablo1620:
! # (diablo1640-lm: removed :if=/usr/share/tabset/xerox1730-lm:, no such
# file -- esr)
diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin:\
:co#124:\
***************
*** 16031,16037 ****
:tc=diablo1640-lm:
# DTC 382 with VDU. Has no :cd: so we fake it with :ce:. Standout
# :so=^P\s\002^PF: works but won't go away without dynamite :se=^P\s\0:.
! # The terminal has tabs, but I'm getting tired of fighting the braindamage.
# If no tab is set or the terminal's in a bad mood, it glitches the screen
# around all of memory. Note that return puts a blank ("a return character")
# in the space the cursor was at, so we use ^P return (and thus ^P newline for
--- 16031,16037 ----
:tc=diablo1640-lm:
# DTC 382 with VDU. Has no :cd: so we fake it with :ce:. Standout
# :so=^P\s\002^PF: works but won't go away without dynamite :se=^P\s\0:.
! # The terminal has tabs, but I'm getting tired of fighting the braindamage.
# If no tab is set or the terminal's in a bad mood, it glitches the screen
# around all of memory. Note that return puts a blank ("a return character")
# in the space the cursor was at, so we use ^P return (and thus ^P newline for
***************
*** 16089,16095 ****
#### Miscellaneous obsolete terminals, manufacturers unknown
#
! # If you have any information about these (like, a manufacturer's name,
# and a date on the serial-number plate) please send it!
cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars:\
--- 16089,16095 ----
#### Miscellaneous obsolete terminals, manufacturers unknown
#
! # If you have any information about these (like, a manufacturer's name,
# and a date on the serial-number plate) please send it!
cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars:\
***************
*** 16206,16212 ****
#
# Kenneth Randell <address@hidden> writes on 31 Dec 1998:
# I had a couple of scopes (3221) like this once where I used to work, around
! # the 1987 time frame if memory serves me correctly. These scopes were made
# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
# compatible. The 3220 was a plain text terminal like the VT-220, the 3221
# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
--- 16206,16212 ----
#
# Kenneth Randell <address@hidden> writes on 31 Dec 1998:
# I had a couple of scopes (3221) like this once where I used to work, around
! # the 1987 time frame if memory serves me correctly. These scopes were made
# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
# compatible. The 3220 was a plain text terminal like the VT-220, the 3221
# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
***************
*** 16262,16279 ****
# receive the document in due course. Don't expect an email acknowledgement.
#
# Related standards include "X3.4-1977: American National Standard Code for
! # Information Interchange" (the ASCII standard) and "X3.41.1974:
# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
# American National Standard for Information Interchange." I believe (but
# am not certain) that these are effectively identical to ECMA-6 and ECMA-35
! # respectively.
#
#### VT100/ANSI/ECMA-48
#
# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
# and ECMA-48 Control Functions for Coded Character Sets.
! #
# Much of the content of this comment is adapted from a table prepared by
# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
# discussion of some terminfo-related issues, and updates to capture ECMA-48
--- 16262,16279 ----
# receive the document in due course. Don't expect an email acknowledgement.
#
# Related standards include "X3.4-1977: American National Standard Code for
! # Information Interchange" (the ASCII standard) and "X3.41.1974:
# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
# American National Standard for Information Interchange." I believe (but
# am not certain) that these are effectively identical to ECMA-6 and ECMA-35
! # respectively.
#
#### VT100/ANSI/ECMA-48
#
# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
# and ECMA-48 Control Functions for Coded Character Sets.
! #
# Much of the content of this comment is adapted from a table prepared by
# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
# discussion of some terminfo-related issues, and updates to capture ECMA-48
***************
*** 16444,16456 ****
# VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
# VT Vertical Tabulation * ^K - FE -
# VTS Vertical Tabulation Set \E J - FE -
! #
# ---------------------------------------------------------------------------
#
# Notes:
#
! # Some control characters are listed in the ECMA-48 standard without
! # being assigned functions relevant to terminal control there (they
# referred to other standards such as ISO 1745 or ECMA-35). They are listed
# here anyway for completeness.
#
--- 16444,16456 ----
# VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
# VT Vertical Tabulation * ^K - FE -
# VTS Vertical Tabulation Set \E J - FE -
! #
# ---------------------------------------------------------------------------
#
# Notes:
#
! # Some control characters are listed in the ECMA-48 standard without
! # being assigned functions relevant to terminal control there (they
# referred to other standards such as ISO 1745 or ECMA-35). They are listed
# here anyway for completeness.
#
***************
*** 16468,16478 ****
#
# (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
#
! # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
# abbreviation.
! #
# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
! # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
# 5 = clear all char tabs, 6 = clear all line tabs.
#
# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
--- 16468,16478 ----
#
# (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
#
! # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
# abbreviation.
! #
# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
! # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
# 5 = clear all char tabs, 6 = clear all line tabs.
#
# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
***************
*** 16488,16494 ****
#
# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
# 1 = clear from beginning, 2 = clear.
! #
# (K) ECMA calls this "End of Guarded Area" but preserves the EPA
abbreviation.
#
# (L) The GSM parameters are vertical and horizontal parameters to scale by.
--- 16488,16494 ----
#
# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
# 1 = clear from beginning, 2 = clear.
! #
# (K) ECMA calls this "End of Guarded Area" but preserves the EPA
abbreviation.
#
# (L) The GSM parameters are vertical and horizontal parameters to scale by.
***************
*** 16525,16531 ****
#
# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
! # from secondary aux device, 4 = stop relay to primary aux device, 5 =
# start relay to primary aux device, 6 = stop relay to secondary aux device,
# 7 = start relay to secondary aux device.
#
--- 16525,16531 ----
#
# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
! # from secondary aux device, 4 = stop relay to primary aux device, 5 =
# start relay to primary aux device, 6 = stop relay to secondary aux device,
# 7 = start relay to secondary aux device.
#
***************
*** 16537,16549 ****
#
# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
#
! # (W) RM/SM modes are as follows: 1 = Guarder Area Transfer Mode (GATM),
! # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
! # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
! # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
--- 16537,16549 ----
#
# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
#
! # (W) RM/SM modes are as follows: 1 = Guarder Area Transfer Mode (GATM),
! # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
! # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
! # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
***************
*** 16560,16627 ****
# abbreviation.
#
# ---------------------------------------------------------------------------
! #
# Abbreviations:
#
# Intro an Introducer of some kind of defined sequence; the normal 7-bit
# X3.64 Control Sequence Introducer is the two characters "Escape ["
! #
# Delim a Delimiter
! #
# x/y identifies a character by position in the ASCII table (column/row)
! #
# eF editor function (see explanation)
! #
# FE format effector (see explanation)
#
# F is a Final character in
# an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
# a control sequence (F from 4/0 to 7/14)
! #
# Gs is a graphic character appearing in strings (Gs ranges from
# 2/0 to 7/14) in the ASCII table
! #
# Ce is a control represented as a single bit combination in the C1 set
# of controls in an 8-bit character set
! #
# C0 the familiar set of 7-bit ASCII control characters
! #
# C1 roughly, the set of control chars available only in 8-bit systems.
# This is too complicated to explain fully here, so read Jim Fleming's
# article in the February 1983 BYTE, especially pages 214 through 224.
! #
# Fe is a Final character of a 2-character Escape sequence that has an
# equivalent representation in an 8-bit environment as a Ce-type
# (Fe ranges from 4/0 to 5/15)
! #
# Fs is a Final character of a 2-character Escape sequence that is
# standardized internationally with identical representation in 7-bit
# and 8-bit environments and is independent of the currently
# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
! #
# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
# ASCII table
! #
# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
# table
! #
# Pn is a numeric parameter in a control sequence, a string of zero or
# more characters ranging from 3/0 to 3/9 in the ASCII table
! #
# Ps is a variable number of selective parameters in a control sequence
# with each selective parameter separated from the other by the code
# 3/11 (which usually represents a semicolon); Ps ranges from
# 3/0 to 3/9 and includes 3/11
#
# * Not relevant to terminal control, listed for completeness only.
! #
# Format Effectors versus Editor Functions
! #
# A format effector specifies how following output is to be displayed.
# An editor function allows you to modify the display. Informally
# format effectors may be destructive; format effectors should not be.
! #
! # For instance, a format effector that moves the "active position" (the
# cursor or equivalent) one space to the left would be useful when you want to
# create an overstrike, a compound character made of two standard characters
# overlaid. Control-H, the Backspace character, is actually supposed to be a
--- 16560,16627 ----
# abbreviation.
#
# ---------------------------------------------------------------------------
! #
# Abbreviations:
#
# Intro an Introducer of some kind of defined sequence; the normal 7-bit
# X3.64 Control Sequence Introducer is the two characters "Escape ["
! #
# Delim a Delimiter
! #
# x/y identifies a character by position in the ASCII table (column/row)
! #
# eF editor function (see explanation)
! #
# FE format effector (see explanation)
#
# F is a Final character in
# an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
# a control sequence (F from 4/0 to 7/14)
! #
# Gs is a graphic character appearing in strings (Gs ranges from
# 2/0 to 7/14) in the ASCII table
! #
# Ce is a control represented as a single bit combination in the C1 set
# of controls in an 8-bit character set
! #
# C0 the familiar set of 7-bit ASCII control characters
! #
# C1 roughly, the set of control chars available only in 8-bit systems.
# This is too complicated to explain fully here, so read Jim Fleming's
# article in the February 1983 BYTE, especially pages 214 through 224.
! #
# Fe is a Final character of a 2-character Escape sequence that has an
# equivalent representation in an 8-bit environment as a Ce-type
# (Fe ranges from 4/0 to 5/15)
! #
# Fs is a Final character of a 2-character Escape sequence that is
# standardized internationally with identical representation in 7-bit
# and 8-bit environments and is independent of the currently
# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
! #
# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
# ASCII table
! #
# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
# table
! #
# Pn is a numeric parameter in a control sequence, a string of zero or
# more characters ranging from 3/0 to 3/9 in the ASCII table
! #
# Ps is a variable number of selective parameters in a control sequence
# with each selective parameter separated from the other by the code
# 3/11 (which usually represents a semicolon); Ps ranges from
# 3/0 to 3/9 and includes 3/11
#
# * Not relevant to terminal control, listed for completeness only.
! #
# Format Effectors versus Editor Functions
! #
# A format effector specifies how following output is to be displayed.
# An editor function allows you to modify the display. Informally
# format effectors may be destructive; format effectors should not be.
! #
! # For instance, a format effector that moves the "active position" (the
# cursor or equivalent) one space to the left would be useful when you want to
# create an overstrike, a compound character made of two standard characters
# overlaid. Control-H, the Backspace character, is actually supposed to be a
***************
*** 16635,16650 ****
# return, linefeed, formfeed, etc., are defined as format effectors.
#
# NOTES ON THE DEC VT100 IMPLEMENTATION
! #
# Control sequences implemented in the VT100 are as follows:
! #
# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
# LNM, NEL, RI, RIS, RM, SGR, SM, TBC
! #
# plus several private DEC commands.
! #
# Erasing parts of the display (EL and ED) in the VT100 is performed thus:
! #
# Erase from cursor to end of line Esc [ 0 K or Esc [ K
# Erase from beginning of line to cursor Esc [ 1 K
# Erase line containing cursor Esc [ 2 K
--- 16635,16650 ----
# return, linefeed, formfeed, etc., are defined as format effectors.
#
# NOTES ON THE DEC VT100 IMPLEMENTATION
! #
# Control sequences implemented in the VT100 are as follows:
! #
# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
# LNM, NEL, RI, RIS, RM, SGR, SM, TBC
! #
# plus several private DEC commands.
! #
# Erasing parts of the display (EL and ED) in the VT100 is performed thus:
! #
# Erase from cursor to end of line Esc [ 0 K or Esc [ K
# Erase from beginning of line to cursor Esc [ 1 K
# Erase line containing cursor Esc [ 2 K
***************
*** 16654,16685 ****
#
# Some brain-damaged terminal/emulators respond to Esc [ J as if it were
# Esc [ 2 J, but this is wrong; the default is 0.
! #
# The VT100 responds to receiving the DA (Device Attributes) control
! #
# Esc [ c (or Esc [ 0 c)
! #
# by transmitting the sequence
! #
# Esc [ ? l ; Ps c
! #
# where Ps is a character that describes installed options.
! #
# The VT100's cursor location can be read with the DSR (Device Status
# Report) control
! #
# Esc [ 6 n
! #
# The VT100 reports by transmitting the CPR sequence
! #
# Esc [ Pl ; Pc R
! #
# where Pl is the line number and Pc is the column number (in decimal).
! #
# The specification for the DEC VT100 is document EK-VT100-UG-003.
#### ANSI.SYS
! #
# Here is a description of the color and attribute controls supported in the
# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
# terminal emulators for Intel boxes obey these. They are a proper subset
--- 16654,16685 ----
#
# Some brain-damaged terminal/emulators respond to Esc [ J as if it were
# Esc [ 2 J, but this is wrong; the default is 0.
! #
# The VT100 responds to receiving the DA (Device Attributes) control
! #
# Esc [ c (or Esc [ 0 c)
! #
# by transmitting the sequence
! #
# Esc [ ? l ; Ps c
! #
# where Ps is a character that describes installed options.
! #
# The VT100's cursor location can be read with the DSR (Device Status
# Report) control
! #
# Esc [ 6 n
! #
# The VT100 reports by transmitting the CPR sequence
! #
# Esc [ Pl ; Pc R
! #
# where Pl is the line number and Pc is the column number (in decimal).
! #
# The specification for the DEC VT100 is document EK-VT100-UG-003.
#### ANSI.SYS
! #
# Here is a description of the color and attribute controls supported in the
# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
# terminal emulators for Intel boxes obey these. They are a proper subset
***************
*** 16716,16722 ****
#### Intel Binary Compatibility Standard
#
! # For comparison, here are the capabilities implied by the Intel Binary
# Compatibility Standard for UNIX systems (Intel order number 468366-001).
# These recommendations are optional. IBCS2 allows the leading escape to
# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
--- 16716,16722 ----
#### Intel Binary Compatibility Standard
#
! # For comparison, here are the capabilities implied by the Intel Binary
# Compatibility Standard for UNIX systems (Intel order number 468366-001).
# These recommendations are optional. IBCS2 allows the leading escape to
# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
***************
*** 16779,16785 ****
# CSI c (clear) clear screen
#
# The lack of any specification for attributes in SGR (among other things)
! # makes this a wretchedly weak standard. The table above is literally
# everything iBSC2 has to say about terminal escape sequences; there is
# no further discussion of their meaning or how to set the parameters
# in these sequences at all.
--- 16779,16785 ----
# CSI c (clear) clear screen
#
# The lack of any specification for attributes in SGR (among other things)
! # makes this a wretchedly weak standard. The table above is literally
# everything iBSC2 has to say about terminal escape sequences; there is
# no further discussion of their meaning or how to set the parameters
# in these sequences at all.
***************
*** 16838,16849 ****
#
# Finally, XENIX also used the following forms-drawing capabilities:
#
! # single double type ASCII approximation
# ------ ------ ------------- -------------------
# GV Gv vertical line |
# GH Gv horizontal line - _
# G1 G5 top right corner _ |
! # G2 G6 top left corner |
# G3 G7 bottom left corner |_
# G4 G8 bottom right corner _|
# GD Gd down-tick character T
--- 16838,16849 ----
#
# Finally, XENIX also used the following forms-drawing capabilities:
#
! # single double type ASCII approximation
# ------ ------ ------------- -------------------
# GV Gv vertical line |
# GH Gv horizontal line - _
# G1 G5 top right corner _ |
! # G2 G6 top left corner |
# G3 G7 bottom left corner |_
# G4 G8 bottom right corner _|
# GD Gd down-tick character T
***************
*** 16892,16898 ****
# correspond to acsc chars, here is the mapping:
#
# box1[0] = ACS_ULCORNER
! # box1[1] = ACS_HLINE
# box1[2] = ACS_URCORNER
# box1[3] = ACS_VLINE
# box1[4] = ACS_LRCORNER
--- 16892,16898 ----
# correspond to acsc chars, here is the mapping:
#
# box1[0] = ACS_ULCORNER
! # box1[1] = ACS_HLINE
# box1[2] = ACS_URCORNER
# box1[3] = ACS_VLINE
# box1[4] = ACS_LRCORNER
***************
*** 16930,16936 ****
# project.
#
# This file contains all the capability information present in John Kunze's
! # last version of the termcap master file, except as noted in the change
# comments at end of file. Some information about very ancient obsolete
# capabilities has been moved to comments. Some all-numeric names of older
# terminals have been retired.
--- 16930,16936 ----
# project.
#
# This file contains all the capability information present in John Kunze's
! # last version of the termcap master file, except as noted in the change
# comments at end of file. Some information about very ancient obsolete
# capabilities has been moved to comments. Some all-numeric names of older
# terminals have been retired.
***************
*** 16998,17004 ****
# * Replaced the translated BBN Bitgraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
! # * Added teleray 16, vc415, cops10.
# * Merged in many individual capabilities from SCO terminfo files.
# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
# * Typo fixes.
--- 16998,17004 ----
# * Replaced the translated BBN Bitgraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
! # * Added teleray 16, vc415, cops10.
# * Merged in many individual capabilities from SCO terminfo files.
# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
# * Typo fixes.
***************
*** 17022,17028 ****
# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
# * Added apple (Videx card), adm1a, oadm31.
# * Fixed malformed ampex csr.
! # * Fixed act4, cyb110; they had old-style prefix padding left in.
# * Changed mandatory to advisory padding in many entries.
# * Replaced HP entries up to hpsub with purpose-built ones.
# * Blank rmir/smir/rmdc/smdc capabilities removed.
--- 17022,17028 ----
# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
# * Added apple (Videx card), adm1a, oadm31.
# * Fixed malformed ampex csr.
! # * Fixed act4, cyb110; they had old-style prefix padding left in.
# * Changed mandatory to advisory padding in many entries.
# * Replaced HP entries up to hpsub with purpose-built ones.
# * Blank rmir/smir/rmdc/smdc capabilities removed.
***************
*** 17052,17058 ****
# * Comment fixes from David MacKenzie.
# * Added the new BSDI pc3 entry.
# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
! # * A change in the tic -C logic now ensures that all entries in
# the termcap translation will fit in < 1024 bytes.
# * Added `bobcat' and `gator' HP consoles and the Nu machine entries
# from GNU termcap file. This merges in all their local information.
--- 17052,17058 ----
# * Comment fixes from David MacKenzie.
# * Added the new BSDI pc3 entry.
# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
! # * A change in the tic -C logic now ensures that all entries in
# the termcap translation will fit in < 1024 bytes.
# * Added `bobcat' and `gator' HP consoles and the Nu machine entries
# from GNU termcap file. This merges in all their local information.
***************
*** 17103,17109 ****
# * Added csr capability to linux entry.
# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
! # * Some commented-out caps in long entries come back in, my code
# for computing string-table lengths had a bug in it.
# * pcansi series modified to fit comm-program reality better.
# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
--- 17103,17109 ----
# * Added csr capability to linux entry.
# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
! # * Some commented-out caps in long entries come back in, my code
# for computing string-table lengths had a bug in it.
# * pcansi series modified to fit comm-program reality better.
# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
***************
*** 17140,17146 ****
# * fixed cup in adm22 entry and parametrized strings in vt320-k3.
# * added it#8 to entries that used to have :pt: -- tvi912, vi200,
# ampex80,
! # * Translate all home=\E[;H capabilities to home=\E[H, they're
# equivalent.
# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
# vt100 and ANSI-like terminals.
--- 17140,17146 ----
# * fixed cup in adm22 entry and parametrized strings in vt320-k3.
# * added it#8 to entries that used to have :pt: -- tvi912, vi200,
# ampex80,
! # * Translate all home=\E[;H capabilities to home=\E[H, they're
# equivalent.
# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
# vt100 and ANSI-like terminals.
***************
*** 17149,17155 ****
# does this now, too.
# * fviewpoint is gone, it duplicated screwpoint.
# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
! # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
# The UW vi50 replaces the old one, which becomes vi50adm,
# * No more embedded commas in name fields.
--- 17149,17155 ----
# does this now, too.
# * fviewpoint is gone, it duplicated screwpoint.
# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
! # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
# The UW vi50 replaces the old one, which becomes vi50adm,
# * No more embedded commas in name fields.
***************
*** 17174,17180 ****
# * Hand-translate more XENIX capabilities.
# * Added hpterm entry for HP's X terminal emulator.
# * Added aixterm entries.
! # * Shortened four names so everything fits in 14 chars.
#
# 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
# * Added ibcs2 entry and info on iBCS2 standard.
--- 17174,17180 ----
# * Hand-translate more XENIX capabilities.
# * Added hpterm entry for HP's X terminal emulator.
# * Added aixterm entries.
! # * Shortened four names so everything fits in 14 chars.
#
# 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
# * Added ibcs2 entry and info on iBCS2 standard.
***************
*** 17198,17220 ****
# * Exiled some utterly unidentifiable custom and homebrew types to the
# UFO file; also, obsolete small-screen hardware; also, entries which
# look flat-out incorrect, garbled, or redundant. These include the
! # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
! # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
! # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
! # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
! # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
! # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
! # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
! # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
! # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
! # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
# * Corrected pcvt25h as suggested by Brian C. Grayson
# <address@hidden>.
# 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
! # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
# * Added kent=\EOM to xterm entry.
#
# 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
--- 17198,17220 ----
# * Exiled some utterly unidentifiable custom and homebrew types to the
# UFO file; also, obsolete small-screen hardware; also, entries which
# look flat-out incorrect, garbled, or redundant. These include the
! # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
! # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
! # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
! # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
! # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
! # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
! # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
! # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
! # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
! # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
# * Corrected pcvt25h as suggested by Brian C. Grayson
# <address@hidden>.
# 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
! # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
# * Added kent=\EOM to xterm entry.
#
# 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
***************
*** 17234,17246 ****
# * Improved iris-ansi and sun entries.
# * More flash string improvements.
# * Corrected wy160 & wy160 as suggested by Robert Dunn
! # * Added dim to at386.
# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
# he's ready to start using the termcap generated from this one.
# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
! # att610, att620, att630,
# * Changed hazeltine name prefix from h to hz.
# * Sent t500 to the UFI file.
# * I think we've sucked all the juice out of BSDI's termcap file now.
--- 17234,17246 ----
# * Improved iris-ansi and sun entries.
# * More flash string improvements.
# * Corrected wy160 & wy160 as suggested by Robert Dunn
! # * Added dim to at386.
# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
# he's ready to start using the termcap generated from this one.
# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
! # att610, att620, att630,
# * Changed hazeltine name prefix from h to hz.
# * Sent t500 to the UFI file.
# * I think we've sucked all the juice out of BSDI's termcap file now.
***************
*** 17305,17311 ****
# * Sun console entry correction from J.T. Conklin.
# * Changed all DEC VT300 and up terminals to use VT300 tab set
# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
! # * Added smul to linux entry (we never noticed it was missing
# because of sgr!).
# * Added rmln to hp+labels (deduced from other HP entries).
# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
--- 17305,17311 ----
# * Sun console entry correction from J.T. Conklin.
# * Changed all DEC VT300 and up terminals to use VT300 tab set
# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
! # * Added smul to linux entry (we never noticed it was missing
# because of sgr!).
# * Added rmln to hp+labels (deduced from other HP entries).
# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
***************
*** 17318,17324 ****
# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
! # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
--- 17318,17324 ----
# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
! # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
***************
*** 17335,17341 ****
# * Aha! The BRL terminals file told us what the Iris extensions mean.
# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
! # cit500, adm11.
# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
--- 17335,17341 ----
# * Aha! The BRL terminals file told us what the Iris extensions mean.
# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
! # cit500, adm11.
# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
***************
*** 17362,17368 ****
# * corrected pairs#8 typo in dtterm entry.
# * added tvi9065.
# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
! # * updated xterm entry to cover 3.1.2E's new features.
# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
# * Added new minix entry
# * Removed aliases of the form ^[0-9]* for obsolete terminals.
--- 17362,17368 ----
# * corrected pairs#8 typo in dtterm entry.
# * added tvi9065.
# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
! # * updated xterm entry to cover 3.1.2E's new features.
# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
# * Added new minix entry
# * Removed aliases of the form ^[0-9]* for obsolete terminals.