[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/src/ccl.c [emacs-unicode-2]
From: |
Kenichi Handa |
Subject: |
[Emacs-diffs] Changes to emacs/src/ccl.c [emacs-unicode-2] |
Date: |
Mon, 08 Sep 2003 08:48:32 -0400 |
Index: emacs/src/ccl.c
diff -c /dev/null emacs/src/ccl.c:1.82.4.1
*** /dev/null Mon Sep 8 08:48:32 2003
--- emacs/src/ccl.c Mon Sep 8 08:48:09 2003
***************
*** 0 ****
--- 1,2292 ----
+ /* CCL (Code Conversion Language) interpreter.
+ Copyright (C) 1995, 1997 Electrotechnical Laboratory, JAPAN.
+ Licensed to the Free Software Foundation.
+ Copyright (C) 2001, 2002 Free Software Foundation, Inc.
+ Copyright (C) 2003
+ National Institute of Advanced Industrial Science and Technology (AIST)
+ Registration Number H13PRO009
+
+ This file is part of GNU Emacs.
+
+ GNU Emacs is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ GNU Emacs is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GNU Emacs; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+ #include <config.h>
+
+ #include <stdio.h>
+
+ #include "lisp.h"
+ #include "character.h"
+ #include "charset.h"
+ #include "ccl.h"
+ #include "coding.h"
+
+ Lisp_Object Qccl, Qcclp;
+
+ /* This contains all code conversion map available to CCL. */
+ Lisp_Object Vcode_conversion_map_vector;
+
+ /* Alist of fontname patterns vs corresponding CCL program. */
+ Lisp_Object Vfont_ccl_encoder_alist;
+
+ /* This symbol is a property which assocates with ccl program vector.
+ Ex: (get 'ccl-big5-encoder 'ccl-program) returns ccl program vector. */
+ Lisp_Object Qccl_program;
+
+ /* These symbols are properties which associate with code conversion
+ map and their ID respectively. */
+ Lisp_Object Qcode_conversion_map;
+ Lisp_Object Qcode_conversion_map_id;
+
+ /* Symbols of ccl program have this property, a value of the property
+ is an index for Vccl_protram_table. */
+ Lisp_Object Qccl_program_idx;
+
+ /* Table of registered CCL programs. Each element is a vector of
+ NAME, CCL_PROG, and RESOLVEDP where NAME (symbol) is the name of
+ the program, CCL_PROG (vector) is the compiled code of the program,
+ RESOLVEDP (t or nil) is the flag to tell if symbols in CCL_PROG is
+ already resolved to index numbers or not. */
+ Lisp_Object Vccl_program_table;
+
+ /* Vector of registered hash tables for translation. */
+ Lisp_Object Vtranslation_hash_table_vector;
+
+ /* Return a hash table of id number ID. */
+ #define GET_HASH_TABLE(id) \
+ (XHASH_TABLE
(XCDR(XVECTOR(Vtranslation_hash_table_vector)->contents[(id)])))
+
+ extern int charset_unicode;
+
+ /* CCL (Code Conversion Language) is a simple language which has
+ operations on one input buffer, one output buffer, and 7 registers.
+ The syntax of CCL is described in `ccl.el'. Emacs Lisp function
+ `ccl-compile' compiles a CCL program and produces a CCL code which
+ is a vector of integers. The structure of this vector is as
+ follows: The 1st element: buffer-magnification, a factor for the
+ size of output buffer compared with the size of input buffer. The
+ 2nd element: address of CCL code to be executed when encountered
+ with end of input stream. The 3rd and the remaining elements: CCL
+ codes. */
+
+ /* Header of CCL compiled code */
+ #define CCL_HEADER_BUF_MAG 0
+ #define CCL_HEADER_EOF 1
+ #define CCL_HEADER_MAIN 2
+
+ /* CCL code is a sequence of 28-bit non-negative integers (i.e. the
+ MSB is always 0), each contains CCL command and/or arguments in the
+ following format:
+
+ |----------------- integer (28-bit) ------------------|
+ |------- 17-bit ------|- 3-bit --|- 3-bit --|- 5-bit -|
+ |--constant argument--|-register-|-register-|-command-|
+ ccccccccccccccccc RRR rrr XXXXX
+ or
+ |------- relative address -------|-register-|-command-|
+ cccccccccccccccccccc rrr XXXXX
+ or
+ |------------- constant or other args ----------------|
+ cccccccccccccccccccccccccccc
+
+ where, `cc...c' is a non-negative integer indicating constant value
+ (the left most `c' is always 0) or an absolute jump address, `RRR'
+ and `rrr' are CCL register number, `XXXXX' is one of the following
+ CCL commands. */
+
+ /* CCL commands
+
+ Each comment fields shows one or more lines for command syntax and
+ the following lines for semantics of the command. In semantics, IC
+ stands for Instruction Counter. */
+
+ #define CCL_SetRegister 0x00 /* Set register a register value:
+ 1:00000000000000000RRRrrrXXXXX
+ ------------------------------
+ reg[rrr] = reg[RRR];
+ */
+
+ #define CCL_SetShortConst 0x01 /* Set register a short constant value:
+ 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX
+ ------------------------------
+ reg[rrr] = CCCCCCCCCCCCCCCCCCC;
+ */
+
+ #define CCL_SetConst 0x02 /* Set register a constant value:
+ 1:00000000000000000000rrrXXXXX
+ 2:CONSTANT
+ ------------------------------
+ reg[rrr] = CONSTANT;
+ IC++;
+ */
+
+ #define CCL_SetArray 0x03 /* Set register an element of array:
+ 1:CCCCCCCCCCCCCCCCCRRRrrrXXXXX
+ 2:ELEMENT[0]
+ 3:ELEMENT[1]
+ ...
+ ------------------------------
+ if (0 <= reg[RRR] < CC..C)
+ reg[rrr] = ELEMENT[reg[RRR]];
+ IC += CC..C;
+ */
+
+ #define CCL_Jump 0x04 /* Jump:
+ 1:A--D--D--R--E--S--S-000XXXXX
+ ------------------------------
+ IC += ADDRESS;
+ */
+
+ /* Note: If CC..C is greater than 0, the second code is omitted. */
+
+ #define CCL_JumpCond 0x05 /* Jump conditional:
+ 1:A--D--D--R--E--S--S-rrrXXXXX
+ ------------------------------
+ if (!reg[rrr])
+ IC += ADDRESS;
+ */
+
+
+ #define CCL_WriteRegisterJump 0x06 /* Write register and jump:
+ 1:A--D--D--R--E--S--S-rrrXXXXX
+ ------------------------------
+ write (reg[rrr]);
+ IC += ADDRESS;
+ */
+
+ #define CCL_WriteRegisterReadJump 0x07 /* Write register, read, and jump:
+ 1:A--D--D--R--E--S--S-rrrXXXXX
+ 2:A--D--D--R--E--S--S-rrrYYYYY
+ -----------------------------
+ write (reg[rrr]);
+ IC++;
+ read (reg[rrr]);
+ IC += ADDRESS;
+ */
+ /* Note: If read is suspended, the resumed execution starts from the
+ second code (YYYYY == CCL_ReadJump). */
+
+ #define CCL_WriteConstJump 0x08 /* Write constant and jump:
+ 1:A--D--D--R--E--S--S-000XXXXX
+ 2:CONST
+ ------------------------------
+ write (CONST);
+ IC += ADDRESS;
+ */
+
+ #define CCL_WriteConstReadJump 0x09 /* Write constant, read, and jump:
+ 1:A--D--D--R--E--S--S-rrrXXXXX
+ 2:CONST
+ 3:A--D--D--R--E--S--S-rrrYYYYY
+ -----------------------------
+ write (CONST);
+ IC += 2;
+ read (reg[rrr]);
+ IC += ADDRESS;
+ */
+ /* Note: If read is suspended, the resumed execution starts from the
+ second code (YYYYY == CCL_ReadJump). */
+
+ #define CCL_WriteStringJump 0x0A /* Write string and jump:
+ 1:A--D--D--R--E--S--S-000XXXXX
+ 2:LENGTH
+ 3:0000STRIN[0]STRIN[1]STRIN[2]
+ ...
+ ------------------------------
+ write_string (STRING, LENGTH);
+ IC += ADDRESS;
+ */
+
+ #define CCL_WriteArrayReadJump 0x0B /* Write an array element, read,
and jump:
+ 1:A--D--D--R--E--S--S-rrrXXXXX
+ 2:LENGTH
+ 3:ELEMENET[0]
+ 4:ELEMENET[1]
+ ...
+ N:A--D--D--R--E--S--S-rrrYYYYY
+ ------------------------------
+ if (0 <= reg[rrr] < LENGTH)
+ write (ELEMENT[reg[rrr]]);
+ IC += LENGTH + 2; (... pointing at N+1)
+ read (reg[rrr]);
+ IC += ADDRESS;
+ */
+ /* Note: If read is suspended, the resumed execution starts from the
+ Nth code (YYYYY == CCL_ReadJump). */
+
+ #define CCL_ReadJump 0x0C /* Read and jump:
+ 1:A--D--D--R--E--S--S-rrrYYYYY
+ -----------------------------
+ read (reg[rrr]);
+ IC += ADDRESS;
+ */
+
+ #define CCL_Branch 0x0D /* Jump by branch table:
+ 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX
+ 2:A--D--D--R--E-S-S[0]000XXXXX
+ 3:A--D--D--R--E-S-S[1]000XXXXX
+ ...
+ ------------------------------
+ if (0 <= reg[rrr] < CC..C)
+ IC += ADDRESS[reg[rrr]];
+ else
+ IC += ADDRESS[CC..C];
+ */
+
+ #define CCL_ReadRegister 0x0E /* Read bytes into registers:
+ 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX
+ 2:CCCCCCCCCCCCCCCCCCCCrrrXXXXX
+ ...
+ ------------------------------
+ while (CCC--)
+ read (reg[rrr]);
+ */
+
+ #define CCL_WriteExprConst 0x0F /* write result of expression:
+ 1:00000OPERATION000RRR000XXXXX
+ 2:CONSTANT
+ ------------------------------
+ write (reg[RRR] OPERATION CONSTANT);
+ IC++;
+ */
+
+ /* Note: If the Nth read is suspended, the resumed execution starts
+ from the Nth code. */
+
+ #define CCL_ReadBranch 0x10 /* Read one byte into a register,
+ and jump by branch table:
+ 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX
+ 2:A--D--D--R--E-S-S[0]000XXXXX
+ 3:A--D--D--R--E-S-S[1]000XXXXX
+ ...
+ ------------------------------
+ read (read[rrr]);
+ if (0 <= reg[rrr] < CC..C)
+ IC += ADDRESS[reg[rrr]];
+ else
+ IC += ADDRESS[CC..C];
+ */
+
+ #define CCL_WriteRegister 0x11 /* Write registers:
+ 1:CCCCCCCCCCCCCCCCCCCrrrXXXXX
+ 2:CCCCCCCCCCCCCCCCCCCrrrXXXXX
+ ...
+ ------------------------------
+ while (CCC--)
+ write (reg[rrr]);
+ ...
+ */
+
+ /* Note: If the Nth write is suspended, the resumed execution
+ starts from the Nth code. */
+
+ #define CCL_WriteExprRegister 0x12 /* Write result of expression
+ 1:00000OPERATIONRrrRRR000XXXXX
+ ------------------------------
+ write (reg[RRR] OPERATION reg[Rrr]);
+ */
+
+ #define CCL_Call 0x13 /* Call the CCL program whose ID is
+ CC..C or cc..c.
+ 1:CCCCCCCCCCCCCCCCCCCCFFFXXXXX
+ [2:00000000cccccccccccccccccccc]
+ ------------------------------
+ if (FFF)
+ call (cc..c)
+ IC++;
+ else
+ call (CC..C)
+ */
+
+ #define CCL_WriteConstString 0x14 /* Write a constant or a string:
+ 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX
+ [2:0000STRIN[0]STRIN[1]STRIN[2]]
+ [...]
+ -----------------------------
+ if (!rrr)
+ write (CC..C)
+ else
+ write_string (STRING, CC..C);
+ IC += (CC..C + 2) / 3;
+ */
+
+ #define CCL_WriteArray 0x15 /* Write an element of array:
+ 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX
+ 2:ELEMENT[0]
+ 3:ELEMENT[1]
+ ...
+ ------------------------------
+ if (0 <= reg[rrr] < CC..C)
+ write (ELEMENT[reg[rrr]]);
+ IC += CC..C;
+ */
+
+ #define CCL_End 0x16 /* Terminate:
+ 1:00000000000000000000000XXXXX
+ ------------------------------
+ terminate ();
+ */
+
+ /* The following two codes execute an assignment arithmetic/logical
+ operation. The form of the operation is like REG OP= OPERAND. */
+
+ #define CCL_ExprSelfConst 0x17 /* REG OP= constant:
+ 1:00000OPERATION000000rrrXXXXX
+ 2:CONSTANT
+ ------------------------------
+ reg[rrr] OPERATION= CONSTANT;
+ */
+
+ #define CCL_ExprSelfReg 0x18 /* REG1 OP= REG2:
+ 1:00000OPERATION000RRRrrrXXXXX
+ ------------------------------
+ reg[rrr] OPERATION= reg[RRR];
+ */
+
+ /* The following codes execute an arithmetic/logical operation. The
+ form of the operation is like REG_X = REG_Y OP OPERAND2. */
+
+ #define CCL_SetExprConst 0x19 /* REG_X = REG_Y OP constant:
+ 1:00000OPERATION000RRRrrrXXXXX
+ 2:CONSTANT
+ ------------------------------
+ reg[rrr] = reg[RRR] OPERATION CONSTANT;
+ IC++;
+ */
+
+ #define CCL_SetExprReg 0x1A /* REG1 = REG2 OP REG3:
+ 1:00000OPERATIONRrrRRRrrrXXXXX
+ ------------------------------
+ reg[rrr] = reg[RRR] OPERATION reg[Rrr];
+ */
+
+ #define CCL_JumpCondExprConst 0x1B /* Jump conditional according to
+ an operation on constant:
+ 1:A--D--D--R--E--S--S-rrrXXXXX
+ 2:OPERATION
+ 3:CONSTANT
+ -----------------------------
+ reg[7] = reg[rrr] OPERATION CONSTANT;
+ if (!(reg[7]))
+ IC += ADDRESS;
+ else
+ IC += 2
+ */
+
+ #define CCL_JumpCondExprReg 0x1C /* Jump conditional according to
+ an operation on register:
+ 1:A--D--D--R--E--S--S-rrrXXXXX
+ 2:OPERATION
+ 3:RRR
+ -----------------------------
+ reg[7] = reg[rrr] OPERATION reg[RRR];
+ if (!reg[7])
+ IC += ADDRESS;
+ else
+ IC += 2;
+ */
+
+ #define CCL_ReadJumpCondExprConst 0x1D /* Read and jump conditional according
+ to an operation on constant:
+ 1:A--D--D--R--E--S--S-rrrXXXXX
+ 2:OPERATION
+ 3:CONSTANT
+ -----------------------------
+ read (reg[rrr]);
+ reg[7] = reg[rrr] OPERATION CONSTANT;
+ if (!reg[7])
+ IC += ADDRESS;
+ else
+ IC += 2;
+ */
+
+ #define CCL_ReadJumpCondExprReg 0x1E /* Read and jump conditional
according
+ to an operation on register:
+ 1:A--D--D--R--E--S--S-rrrXXXXX
+ 2:OPERATION
+ 3:RRR
+ -----------------------------
+ read (reg[rrr]);
+ reg[7] = reg[rrr] OPERATION reg[RRR];
+ if (!reg[7])
+ IC += ADDRESS;
+ else
+ IC += 2;
+ */
+
+ #define CCL_Extension 0x1F /* Extended CCL code
+ 1:ExtendedCOMMNDRrrRRRrrrXXXXX
+ 2:ARGUEMENT
+ 3:...
+ ------------------------------
+ extended_command (rrr,RRR,Rrr,ARGS)
+ */
+
+ /*
+ Here after, Extended CCL Instructions.
+ Bit length of extended command is 14.
+ Therefore, the instruction code range is 0..16384(0x3fff).
+ */
+
+ /* Read a multibyte characeter.
+ A code point is stored into reg[rrr]. A charset ID is stored into
+ reg[RRR]. */
+
+ #define CCL_ReadMultibyteChar2 0x00 /* Read Multibyte Character
+ 1:ExtendedCOMMNDRrrRRRrrrXXXXX */
+
+ /* Write a multibyte character.
+ Write a character whose code point is reg[rrr] and the charset ID
+ is reg[RRR]. */
+
+ #define CCL_WriteMultibyteChar2 0x01 /* Write Multibyte Character
+ 1:ExtendedCOMMNDRrrRRRrrrXXXXX */
+
+ /* Translate a character whose code point is reg[rrr] and the charset
+ ID is reg[RRR] by a translation table whose ID is reg[Rrr].
+
+ A translated character is set in reg[rrr] (code point) and reg[RRR]
+ (charset ID). */
+
+ #define CCL_TranslateCharacter 0x02 /* Translate a multibyte character
+ 1:ExtendedCOMMNDRrrRRRrrrXXXXX */
+
+ /* Translate a character whose code point is reg[rrr] and the charset
+ ID is reg[RRR] by a translation table whose ID is ARGUMENT.
+
+ A translated character is set in reg[rrr] (code point) and reg[RRR]
+ (charset ID). */
+
+ #define CCL_TranslateCharacterConstTbl 0x03 /* Translate a multibyte character
+ 1:ExtendedCOMMNDRrrRRRrrrXXXXX
+ 2:ARGUMENT(Translation Table ID)
+ */
+
+ /* Iterate looking up MAPs for reg[rrr] starting from the Nth (N =
+ reg[RRR]) MAP until some value is found.
+
+ Each MAP is a Lisp vector whose element is number, nil, t, or
+ lambda.
+ If the element is nil, ignore the map and proceed to the next map.
+ If the element is t or lambda, finish without changing reg[rrr].
+ If the element is a number, set reg[rrr] to the number and finish.
+
+ Detail of the map structure is descibed in the comment for
+ CCL_MapMultiple below. */
+
+ #define CCL_IterateMultipleMap 0x10 /* Iterate multiple maps
+ 1:ExtendedCOMMNDXXXRRRrrrXXXXX
+ 2:NUMBER of MAPs
+ 3:MAP-ID1
+ 4:MAP-ID2
+ ...
+ */
+
+ /* Map the code in reg[rrr] by MAPs starting from the Nth (N =
+ reg[RRR]) map.
+
+ MAPs are supplied in the succeeding CCL codes as follows:
+
+ When CCL program gives this nested structure of map to this command:
+ ((MAP-ID11
+ MAP-ID12
+ (MAP-ID121 MAP-ID122 MAP-ID123)
+ MAP-ID13)
+ (MAP-ID21
+ (MAP-ID211 (MAP-ID2111) MAP-ID212)
+ MAP-ID22)),
+ the compiled CCL codes has this sequence:
+ CCL_MapMultiple (CCL code of this command)
+ 16 (total number of MAPs and SEPARATORs)
+ -7 (1st SEPARATOR)
+ MAP-ID11
+ MAP-ID12
+ -3 (2nd SEPARATOR)
+ MAP-ID121
+ MAP-ID122
+ MAP-ID123
+ MAP-ID13
+ -7 (3rd SEPARATOR)
+ MAP-ID21
+ -4 (4th SEPARATOR)
+ MAP-ID211
+ -1 (5th SEPARATOR)
+ MAP_ID2111
+ MAP-ID212
+ MAP-ID22
+
+ A value of each SEPARATOR follows this rule:
+ MAP-SET := SEPARATOR [(MAP-ID | MAP-SET)]+
+ SEPARATOR := -(number of MAP-IDs and SEPARATORs in the MAP-SET)
+
+ (*)....Nest level of MAP-SET must not be over than MAX_MAP_SET_LEVEL.
+
+ When some map fails to map (i.e. it doesn't have a value for
+ reg[rrr]), the mapping is treated as identity.
+
+ The mapping is iterated for all maps in each map set (set of maps
+ separated by SEPARATOR) except in the case that lambda is
+ encountered. More precisely, the mapping proceeds as below:
+
+ At first, VAL0 is set to reg[rrr], and it is translated by the
+ first map to VAL1. Then, VAL1 is translated by the next map to
+ VAL2. This mapping is iterated until the last map is used. The
+ result of the mapping is the last value of VAL?. When the mapping
+ process reached to the end of the map set, it moves to the next
+ map set. If the next does not exit, the mapping process terminates,
+ and regard the last value as a result.
+
+ But, when VALm is mapped to VALn and VALn is not a number, the
+ mapping proceed as below:
+
+ If VALn is nil, the lastest map is ignored and the mapping of VALm
+ proceed to the next map.
+
+ In VALn is t, VALm is reverted to reg[rrr] and the mapping of VALm
+ proceed to the next map.
+
+ If VALn is lambda, move to the next map set like reaching to the
+ end of the current map set.
+
+ If VALn is a symbol, call the CCL program refered by it.
+ Then, use reg[rrr] as a mapped value except for -1, -2 and -3.
+ Such special values are regarded as nil, t, and lambda respectively.
+
+ Each map is a Lisp vector of the following format (a) or (b):
+ (a)......[STARTPOINT VAL1 VAL2 ...]
+ (b)......[t VAL STARTPOINT ENDPOINT],
+ where
+ STARTPOINT is an offset to be used for indexing a map,
+ ENDPOINT is a maximum index number of a map,
+ VAL and VALn is a number, nil, t, or lambda.
+
+ Valid index range of a map of type (a) is:
+ STARTPOINT <= index < STARTPOINT + map_size - 1
+ Valid index range of a map of type (b) is:
+ STARTPOINT <= index < ENDPOINT */
+
+ #define CCL_MapMultiple 0x11 /* Mapping by multiple code conversion maps
+ 1:ExtendedCOMMNDXXXRRRrrrXXXXX
+ 2:N-2
+ 3:SEPARATOR_1 (< 0)
+ 4:MAP-ID_1
+ 5:MAP-ID_2
+ ...
+ M:SEPARATOR_x (< 0)
+ M+1:MAP-ID_y
+ ...
+ N:SEPARATOR_z (< 0)
+ */
+
+ #define MAX_MAP_SET_LEVEL 30
+
+ typedef struct
+ {
+ int rest_length;
+ int orig_val;
+ } tr_stack;
+
+ static tr_stack mapping_stack[MAX_MAP_SET_LEVEL];
+ static tr_stack *mapping_stack_pointer;
+
+ /* If this variable is non-zero, it indicates the stack_idx
+ of immediately called by CCL_MapMultiple. */
+ static int stack_idx_of_map_multiple;
+
+ #define PUSH_MAPPING_STACK(restlen, orig) \
+ do \
+ { \
+ mapping_stack_pointer->rest_length = (restlen); \
+ mapping_stack_pointer->orig_val = (orig); \
+ mapping_stack_pointer++; \
+ } \
+ while (0)
+
+ #define POP_MAPPING_STACK(restlen, orig) \
+ do \
+ { \
+ mapping_stack_pointer--; \
+ (restlen) = mapping_stack_pointer->rest_length; \
+ (orig) = mapping_stack_pointer->orig_val; \
+ } \
+ while (0)
+
+ #define CCL_CALL_FOR_MAP_INSTRUCTION(symbol, ret_ic) \
+ do \
+ { \
+ struct ccl_program called_ccl; \
+ if (stack_idx >= 256 \
+ || (setup_ccl_program (&called_ccl, (symbol)) != 0)) \
+ { \
+ if (stack_idx > 0) \
+ { \
+ ccl_prog = ccl_prog_stack_struct[0].ccl_prog; \
+ ic = ccl_prog_stack_struct[0].ic; \
+ } \
+ CCL_INVALID_CMD; \
+ } \
+ ccl_prog_stack_struct[stack_idx].ccl_prog = ccl_prog; \
+ ccl_prog_stack_struct[stack_idx].ic = (ret_ic); \
+ stack_idx++; \
+ ccl_prog = called_ccl.prog; \
+ ic = CCL_HEADER_MAIN; \
+ goto ccl_repeat; \
+ } \
+ while (0)
+
+ #define CCL_MapSingle 0x12 /* Map by single code conversion map
+ 1:ExtendedCOMMNDXXXRRRrrrXXXXX
+ 2:MAP-ID
+ ------------------------------
+ Map reg[rrr] by MAP-ID.
+ If some valid mapping is found,
+ set reg[rrr] to the result,
+ else
+ set reg[RRR] to -1.
+ */
+
+ #define CCL_LookupIntConstTbl 0x13 /* Lookup multibyte character by
+ integer key. Afterwards R7 set
+ to 1 iff lookup succeeded.
+ 1:ExtendedCOMMNDRrrRRRXXXXXXXX
+ 2:ARGUMENT(Hash table ID) */
+
+ #define CCL_LookupCharConstTbl 0x14 /* Lookup integer by multibyte
+ character key. Afterwards R7 set
+ to 1 iff lookup succeeded.
+ 1:ExtendedCOMMNDRrrRRRrrrXXXXX
+ 2:ARGUMENT(Hash table ID) */
+
+ /* CCL arithmetic/logical operators. */
+ #define CCL_PLUS 0x00 /* X = Y + Z */
+ #define CCL_MINUS 0x01 /* X = Y - Z */
+ #define CCL_MUL 0x02 /* X = Y * Z */
+ #define CCL_DIV 0x03 /* X = Y / Z */
+ #define CCL_MOD 0x04 /* X = Y % Z */
+ #define CCL_AND 0x05 /* X = Y & Z */
+ #define CCL_OR 0x06 /* X = Y | Z */
+ #define CCL_XOR 0x07 /* X = Y ^ Z */
+ #define CCL_LSH 0x08 /* X = Y << Z */
+ #define CCL_RSH 0x09 /* X = Y >> Z */
+ #define CCL_LSH8 0x0A /* X = (Y << 8) | Z */
+ #define CCL_RSH8 0x0B /* X = Y >> 8, r[7] = Y & 0xFF */
+ #define CCL_DIVMOD 0x0C /* X = Y / Z, r[7] = Y % Z */
+ #define CCL_LS 0x10 /* X = (X < Y) */
+ #define CCL_GT 0x11 /* X = (X > Y) */
+ #define CCL_EQ 0x12 /* X = (X == Y) */
+ #define CCL_LE 0x13 /* X = (X <= Y) */
+ #define CCL_GE 0x14 /* X = (X >= Y) */
+ #define CCL_NE 0x15 /* X = (X != Y) */
+
+ #define CCL_DECODE_SJIS 0x16 /* X = HIGHER_BYTE (DE-SJIS (Y, Z))
+ r[7] = LOWER_BYTE (DE-SJIS (Y, Z)) */
+ #define CCL_ENCODE_SJIS 0x17 /* X = HIGHER_BYTE (SJIS (Y, Z))
+ r[7] = LOWER_BYTE (SJIS (Y, Z) */
+
+ /* Terminate CCL program successfully. */
+ #define CCL_SUCCESS \
+ do \
+ { \
+ ccl->status = CCL_STAT_SUCCESS; \
+ goto ccl_finish; \
+ } \
+ while(0)
+
+ /* Suspend CCL program because of reading from empty input buffer or
+ writing to full output buffer. When this program is resumed, the
+ same I/O command is executed. */
+ #define CCL_SUSPEND(stat) \
+ do \
+ { \
+ ic--; \
+ ccl->status = stat; \
+ goto ccl_finish; \
+ } \
+ while (0)
+
+ /* Terminate CCL program because of invalid command. Should not occur
+ in the normal case. */
+ #define CCL_INVALID_CMD \
+ do \
+ { \
+ ccl->status = CCL_STAT_INVALID_CMD; \
+ goto ccl_error_handler; \
+ } \
+ while(0)
+
+ /* Encode one character CH to multibyte form and write to the current
+ output buffer. If CH is less than 256, CH is written as is. */
+ #define CCL_WRITE_CHAR(ch) \
+ do { \
+ if (! dst) \
+ CCL_INVALID_CMD; \
+ else if (dst < dst_end) \
+ *dst++ = (ch); \
+ else \
+ CCL_SUSPEND (CCL_STAT_SUSPEND_BY_DST); \
+ } while (0)
+
+ /* Write a string at ccl_prog[IC] of length LEN to the current output
+ buffer. */
+ #define CCL_WRITE_STRING(len) \
+ do { \
+ int i; \
+ if (!dst) \
+ CCL_INVALID_CMD; \
+ else if (dst + len <= dst_end) \
+ for (i = 0; i < len; i++) \
+ *dst++ = ((XFASTINT (ccl_prog[ic + (i / 3)])) \
+ >> ((2 - (i % 3)) * 8)) & 0xFF; \
+ else \
+ CCL_SUSPEND (CCL_STAT_SUSPEND_BY_DST); \
+ } while (0)
+
+ /* Read one byte from the current input buffer into Rth register. */
+ #define CCL_READ_CHAR(r) \
+ do { \
+ if (! src) \
+ CCL_INVALID_CMD; \
+ else if (src < src_end) \
+ r = *src++; \
+ else if (ccl->last_block) \
+ { \
+ ic = ccl->eof_ic; \
+ goto ccl_repeat; \
+ } \
+ else \
+ CCL_SUSPEND (CCL_STAT_SUSPEND_BY_SRC); \
+ } while (0)
+
+ /* Decode CODE by a charset whose id is ID. If ID is 0, return CODE
+ as is for backward compatibility. Assume that we can use the
+ variable `charset'. */
+
+ #define CCL_DECODE_CHAR(id, code) \
+ ((id) == 0 ? (code) \
+ : (charset = CHARSET_FROM_ID ((id)), DECODE_CHAR (charset, (code))))
+
+ /* Encode character C by some of charsets in CHARSET_LIST. Set ID to
+ the id of the used charset, ENCODED to the resulf of encoding.
+ Assume that we can use the variable `charset'. */
+
+ #define CCL_ENCODE_CHAR(c, charset_list, id, encoded) \
+ do { \
+ unsigned code; \
+ \
+ charset = char_charset ((c), (charset_list), &code); \
+ if (! charset && ! NILP (charset_list)) \
+ charset = char_charset ((c), Qnil, &code); \
+ if (charset) \
+ { \
+ (id) = CHARSET_ID (charset); \
+ (encoded) = code; \
+ } \
+ } while (0)
+
+ /* Execute CCL code on characters at SOURCE (length SRC_SIZE). The
+ resulting text goes to a place pointed by DESTINATION, the length
+ of which should not exceed DST_SIZE. As a side effect, how many
+ characters are consumed and produced are recorded in CCL->consumed
+ and CCL->produced, and the contents of CCL registers are updated.
+ If SOURCE or DESTINATION is NULL, only operations on registers are
+ permitted. */
+
+ #ifdef CCL_DEBUG
+ #define CCL_DEBUG_BACKTRACE_LEN 256
+ int ccl_backtrace_table[CCL_DEBUG_BACKTRACE_LEN];
+ int ccl_backtrace_idx;
+ #endif
+
+ struct ccl_prog_stack
+ {
+ Lisp_Object *ccl_prog; /* Pointer to an array of CCL code. */
+ int ic; /* Instruction Counter. */
+ };
+
+ /* For the moment, we only support depth 256 of stack. */
+ static struct ccl_prog_stack ccl_prog_stack_struct[256];
+
+ void
+ ccl_driver (ccl, source, destination, src_size, dst_size, charset_list)
+ struct ccl_program *ccl;
+ int *source, *destination;
+ int src_size, dst_size;
+ Lisp_Object charset_list;
+ {
+ register int *reg = ccl->reg;
+ register int ic = ccl->ic;
+ register int code = 0, field1, field2;
+ register Lisp_Object *ccl_prog = ccl->prog;
+ int *src = source, *src_end = src + src_size;
+ int *dst = destination, *dst_end = dst + dst_size;
+ int jump_address;
+ int i = 0, j, op;
+ int stack_idx = ccl->stack_idx;
+ /* Instruction counter of the current CCL code. */
+ int this_ic = 0;
+ struct charset *charset;
+
+ if (ic >= ccl->eof_ic)
+ ic = CCL_HEADER_MAIN;
+
+ if (ccl->buf_magnification == 0) /* We can't read/produce any bytes. */
+ dst = NULL;
+
+ /* Set mapping stack pointer. */
+ mapping_stack_pointer = mapping_stack;
+
+ #ifdef CCL_DEBUG
+ ccl_backtrace_idx = 0;
+ #endif
+
+ for (;;)
+ {
+ ccl_repeat:
+ #ifdef CCL_DEBUG
+ ccl_backtrace_table[ccl_backtrace_idx++] = ic;
+ if (ccl_backtrace_idx >= CCL_DEBUG_BACKTRACE_LEN)
+ ccl_backtrace_idx = 0;
+ ccl_backtrace_table[ccl_backtrace_idx] = 0;
+ #endif
+
+ if (!NILP (Vquit_flag) && NILP (Vinhibit_quit))
+ {
+ /* We can't just signal Qquit, instead break the loop as if
+ the whole data is processed. Don't reset Vquit_flag, it
+ must be handled later at a safer place. */
+ if (src)
+ src = source + src_size;
+ ccl->status = CCL_STAT_QUIT;
+ break;
+ }
+
+ this_ic = ic;
+ code = XINT (ccl_prog[ic]); ic++;
+ field1 = code >> 8;
+ field2 = (code & 0xFF) >> 5;
+
+ #define rrr field2
+ #define RRR (field1 & 7)
+ #define Rrr ((field1 >> 3) & 7)
+ #define ADDR field1
+ #define EXCMD (field1 >> 6)
+
+ switch (code & 0x1F)
+ {
+ case CCL_SetRegister: /* 00000000000000000RRRrrrXXXXX */
+ reg[rrr] = reg[RRR];
+ break;
+
+ case CCL_SetShortConst: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */
+ reg[rrr] = field1;
+ break;
+
+ case CCL_SetConst: /* 00000000000000000000rrrXXXXX */
+ reg[rrr] = XINT (ccl_prog[ic]);
+ ic++;
+ break;
+
+ case CCL_SetArray: /* CCCCCCCCCCCCCCCCCCCCRRRrrrXXXXX */
+ i = reg[RRR];
+ j = field1 >> 3;
+ if ((unsigned int) i < j)
+ reg[rrr] = XINT (ccl_prog[ic + i]);
+ ic += j;
+ break;
+
+ case CCL_Jump: /* A--D--D--R--E--S--S-000XXXXX */
+ ic += ADDR;
+ break;
+
+ case CCL_JumpCond: /* A--D--D--R--E--S--S-rrrXXXXX */
+ if (!reg[rrr])
+ ic += ADDR;
+ break;
+
+ case CCL_WriteRegisterJump: /* A--D--D--R--E--S--S-rrrXXXXX */
+ i = reg[rrr];
+ CCL_WRITE_CHAR (i);
+ ic += ADDR;
+ break;
+
+ case CCL_WriteRegisterReadJump: /* A--D--D--R--E--S--S-rrrXXXXX */
+ i = reg[rrr];
+ CCL_WRITE_CHAR (i);
+ ic++;
+ CCL_READ_CHAR (reg[rrr]);
+ ic += ADDR - 1;
+ break;
+
+ case CCL_WriteConstJump: /* A--D--D--R--E--S--S-000XXXXX */
+ i = XINT (ccl_prog[ic]);
+ CCL_WRITE_CHAR (i);
+ ic += ADDR;
+ break;
+
+ case CCL_WriteConstReadJump: /* A--D--D--R--E--S--S-rrrXXXXX */
+ i = XINT (ccl_prog[ic]);
+ CCL_WRITE_CHAR (i);
+ ic++;
+ CCL_READ_CHAR (reg[rrr]);
+ ic += ADDR - 1;
+ break;
+
+ case CCL_WriteStringJump: /* A--D--D--R--E--S--S-000XXXXX */
+ j = XINT (ccl_prog[ic]);
+ ic++;
+ CCL_WRITE_STRING (j);
+ ic += ADDR - 1;
+ break;
+
+ case CCL_WriteArrayReadJump: /* A--D--D--R--E--S--S-rrrXXXXX */
+ i = reg[rrr];
+ j = XINT (ccl_prog[ic]);
+ if ((unsigned int) i < j)
+ {
+ i = XINT (ccl_prog[ic + 1 + i]);
+ CCL_WRITE_CHAR (i);
+ }
+ ic += j + 2;
+ CCL_READ_CHAR (reg[rrr]);
+ ic += ADDR - (j + 2);
+ break;
+
+ case CCL_ReadJump: /* A--D--D--R--E--S--S-rrrYYYYY */
+ CCL_READ_CHAR (reg[rrr]);
+ ic += ADDR;
+ break;
+
+ case CCL_ReadBranch: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */
+ CCL_READ_CHAR (reg[rrr]);
+ /* fall through ... */
+ case CCL_Branch: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */
+ if ((unsigned int) reg[rrr] < field1)
+ ic += XINT (ccl_prog[ic + reg[rrr]]);
+ else
+ ic += XINT (ccl_prog[ic + field1]);
+ break;
+
+ case CCL_ReadRegister: /* CCCCCCCCCCCCCCCCCCCCrrXXXXX */
+ while (1)
+ {
+ CCL_READ_CHAR (reg[rrr]);
+ if (!field1) break;
+ code = XINT (ccl_prog[ic]); ic++;
+ field1 = code >> 8;
+ field2 = (code & 0xFF) >> 5;
+ }
+ break;
+
+ case CCL_WriteExprConst: /* 1:00000OPERATION000RRR000XXXXX */
+ rrr = 7;
+ i = reg[RRR];
+ j = XINT (ccl_prog[ic]);
+ op = field1 >> 6;
+ jump_address = ic + 1;
+ goto ccl_set_expr;
+
+ case CCL_WriteRegister: /* CCCCCCCCCCCCCCCCCCCrrrXXXXX */
+ while (1)
+ {
+ i = reg[rrr];
+ CCL_WRITE_CHAR (i);
+ if (!field1) break;
+ code = XINT (ccl_prog[ic]); ic++;
+ field1 = code >> 8;
+ field2 = (code & 0xFF) >> 5;
+ }
+ break;
+
+ case CCL_WriteExprRegister: /* 1:00000OPERATIONRrrRRR000XXXXX */
+ rrr = 7;
+ i = reg[RRR];
+ j = reg[Rrr];
+ op = field1 >> 6;
+ jump_address = ic;
+ goto ccl_set_expr;
+
+ case CCL_Call: /* 1:CCCCCCCCCCCCCCCCCCCCFFFXXXXX */
+ {
+ Lisp_Object slot;
+ int prog_id;
+
+ /* If FFF is nonzero, the CCL program ID is in the
+ following code. */
+ if (rrr)
+ {
+ prog_id = XINT (ccl_prog[ic]);
+ ic++;
+ }
+ else
+ prog_id = field1;
+
+ if (stack_idx >= 256
+ || prog_id < 0
+ || prog_id >= ASIZE (Vccl_program_table)
+ || (slot = AREF (Vccl_program_table, prog_id), !VECTORP (slot))
+ || !VECTORP (AREF (slot, 1)))
+ {
+ if (stack_idx > 0)
+ {
+ ccl_prog = ccl_prog_stack_struct[0].ccl_prog;
+ ic = ccl_prog_stack_struct[0].ic;
+ }
+ CCL_INVALID_CMD;
+ }
+
+ ccl_prog_stack_struct[stack_idx].ccl_prog = ccl_prog;
+ ccl_prog_stack_struct[stack_idx].ic = ic;
+ stack_idx++;
+ ccl_prog = XVECTOR (AREF (slot, 1))->contents;
+ ic = CCL_HEADER_MAIN;
+ }
+ break;
+
+ case CCL_WriteConstString: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */
+ if (!rrr)
+ CCL_WRITE_CHAR (field1);
+ else
+ {
+ CCL_WRITE_STRING (field1);
+ ic += (field1 + 2) / 3;
+ }
+ break;
+
+ case CCL_WriteArray: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */
+ i = reg[rrr];
+ if ((unsigned int) i < field1)
+ {
+ j = XINT (ccl_prog[ic + i]);
+ CCL_WRITE_CHAR (j);
+ }
+ ic += field1;
+ break;
+
+ case CCL_End: /* 0000000000000000000000XXXXX */
+ if (stack_idx > 0)
+ {
+ stack_idx--;
+ ccl_prog = ccl_prog_stack_struct[stack_idx].ccl_prog;
+ ic = ccl_prog_stack_struct[stack_idx].ic;
+ break;
+ }
+ if (src)
+ src = src_end;
+ /* ccl->ic should points to this command code again to
+ suppress further processing. */
+ ic--;
+ CCL_SUCCESS;
+
+ case CCL_ExprSelfConst: /* 00000OPERATION000000rrrXXXXX */
+ i = XINT (ccl_prog[ic]);
+ ic++;
+ op = field1 >> 6;
+ goto ccl_expr_self;
+
+ case CCL_ExprSelfReg: /* 00000OPERATION000RRRrrrXXXXX */
+ i = reg[RRR];
+ op = field1 >> 6;
+
+ ccl_expr_self:
+ switch (op)
+ {
+ case CCL_PLUS: reg[rrr] += i; break;
+ case CCL_MINUS: reg[rrr] -= i; break;
+ case CCL_MUL: reg[rrr] *= i; break;
+ case CCL_DIV: reg[rrr] /= i; break;
+ case CCL_MOD: reg[rrr] %= i; break;
+ case CCL_AND: reg[rrr] &= i; break;
+ case CCL_OR: reg[rrr] |= i; break;
+ case CCL_XOR: reg[rrr] ^= i; break;
+ case CCL_LSH: reg[rrr] <<= i; break;
+ case CCL_RSH: reg[rrr] >>= i; break;
+ case CCL_LSH8: reg[rrr] <<= 8; reg[rrr] |= i; break;
+ case CCL_RSH8: reg[7] = reg[rrr] & 0xFF; reg[rrr] >>= 8; break;
+ case CCL_DIVMOD: reg[7] = reg[rrr] % i; reg[rrr] /= i; break;
+ case CCL_LS: reg[rrr] = reg[rrr] < i; break;
+ case CCL_GT: reg[rrr] = reg[rrr] > i; break;
+ case CCL_EQ: reg[rrr] = reg[rrr] == i; break;
+ case CCL_LE: reg[rrr] = reg[rrr] <= i; break;
+ case CCL_GE: reg[rrr] = reg[rrr] >= i; break;
+ case CCL_NE: reg[rrr] = reg[rrr] != i; break;
+ default: CCL_INVALID_CMD;
+ }
+ break;
+
+ case CCL_SetExprConst: /* 00000OPERATION000RRRrrrXXXXX */
+ i = reg[RRR];
+ j = XINT (ccl_prog[ic]);
+ op = field1 >> 6;
+ jump_address = ++ic;
+ goto ccl_set_expr;
+
+ case CCL_SetExprReg: /* 00000OPERATIONRrrRRRrrrXXXXX */
+ i = reg[RRR];
+ j = reg[Rrr];
+ op = field1 >> 6;
+ jump_address = ic;
+ goto ccl_set_expr;
+
+ case CCL_ReadJumpCondExprConst: /* A--D--D--R--E--S--S-rrrXXXXX */
+ CCL_READ_CHAR (reg[rrr]);
+ case CCL_JumpCondExprConst: /* A--D--D--R--E--S--S-rrrXXXXX */
+ i = reg[rrr];
+ op = XINT (ccl_prog[ic]);
+ jump_address = ic++ + ADDR;
+ j = XINT (ccl_prog[ic]);
+ ic++;
+ rrr = 7;
+ goto ccl_set_expr;
+
+ case CCL_ReadJumpCondExprReg: /* A--D--D--R--E--S--S-rrrXXXXX */
+ CCL_READ_CHAR (reg[rrr]);
+ case CCL_JumpCondExprReg:
+ i = reg[rrr];
+ op = XINT (ccl_prog[ic]);
+ jump_address = ic++ + ADDR;
+ j = reg[XINT (ccl_prog[ic])];
+ ic++;
+ rrr = 7;
+
+ ccl_set_expr:
+ switch (op)
+ {
+ case CCL_PLUS: reg[rrr] = i + j; break;
+ case CCL_MINUS: reg[rrr] = i - j; break;
+ case CCL_MUL: reg[rrr] = i * j; break;
+ case CCL_DIV: reg[rrr] = i / j; break;
+ case CCL_MOD: reg[rrr] = i % j; break;
+ case CCL_AND: reg[rrr] = i & j; break;
+ case CCL_OR: reg[rrr] = i | j; break;
+ case CCL_XOR: reg[rrr] = i ^ j;; break;
+ case CCL_LSH: reg[rrr] = i << j; break;
+ case CCL_RSH: reg[rrr] = i >> j; break;
+ case CCL_LSH8: reg[rrr] = (i << 8) | j; break;
+ case CCL_RSH8: reg[rrr] = i >> 8; reg[7] = i & 0xFF; break;
+ case CCL_DIVMOD: reg[rrr] = i / j; reg[7] = i % j; break;
+ case CCL_LS: reg[rrr] = i < j; break;
+ case CCL_GT: reg[rrr] = i > j; break;
+ case CCL_EQ: reg[rrr] = i == j; break;
+ case CCL_LE: reg[rrr] = i <= j; break;
+ case CCL_GE: reg[rrr] = i >= j; break;
+ case CCL_NE: reg[rrr] = i != j; break;
+ case CCL_DECODE_SJIS:
+ {
+ i = (i << 8) | j;
+ SJIS_TO_JIS (i);
+ reg[rrr] = i >> 8;
+ reg[7] = i & 0xFF;
+ break;
+ }
+ case CCL_ENCODE_SJIS:
+ {
+ i = (i << 8) | j;
+ JIS_TO_SJIS (i);
+ reg[rrr] = i >> 8;
+ reg[7] = i & 0xFF;
+ break;
+ }
+ default: CCL_INVALID_CMD;
+ }
+ code &= 0x1F;
+ if (code == CCL_WriteExprConst || code == CCL_WriteExprRegister)
+ {
+ i = reg[rrr];
+ CCL_WRITE_CHAR (i);
+ ic = jump_address;
+ }
+ else if (!reg[rrr])
+ ic = jump_address;
+ break;
+
+ case CCL_Extension:
+ switch (EXCMD)
+ {
+ case CCL_ReadMultibyteChar2:
+ if (!src)
+ CCL_INVALID_CMD;
+ CCL_READ_CHAR (i);
+ CCL_ENCODE_CHAR (i, charset_list, reg[RRR], reg[rrr]);
+ break;
+
+ case CCL_WriteMultibyteChar2:
+ if (! dst)
+ CCL_INVALID_CMD;
+ i = CCL_DECODE_CHAR (reg[RRR], reg[rrr]);
+ CCL_WRITE_CHAR (i);
+ break;
+
+ case CCL_TranslateCharacter:
+ i = CCL_DECODE_CHAR (reg[RRR], reg[rrr]);
+ op = translate_char (GET_TRANSLATION_TABLE (reg[Rrr]), i);
+ CCL_ENCODE_CHAR (op, charset_list, reg[RRR], reg[rrr]);
+ break;
+
+ case CCL_TranslateCharacterConstTbl:
+ op = XINT (ccl_prog[ic]); /* table */
+ ic++;
+ i = CCL_DECODE_CHAR (reg[RRR], reg[rrr]);
+ op = translate_char (GET_TRANSLATION_TABLE (op), i);
+ CCL_ENCODE_CHAR (op, charset_list, reg[RRR], reg[rrr]);
+ break;
+
+ case CCL_LookupIntConstTbl:
+ op = XINT (ccl_prog[ic]); /* table */
+ ic++;
+ {
+ struct Lisp_Hash_Table *h = GET_HASH_TABLE (op);
+
+ op = hash_lookup (h, make_number (reg[RRR]), NULL);
+ if (op >= 0)
+ {
+ Lisp_Object opl;
+ opl = HASH_VALUE (h, op);
+ if (! CHARACTERP (XINT (opl)))
+ CCL_INVALID_CMD;
+ reg[RRR] = charset_unicode;
+ reg[rrr] = op;
+ reg[7] = 1; /* r7 true for success */
+ }
+ else
+ reg[7] = 0;
+ }
+ break;
+
+ case CCL_LookupCharConstTbl:
+ op = XINT (ccl_prog[ic]); /* table */
+ ic++;
+ i = CCL_DECODE_CHAR (reg[RRR], reg[rrr]);
+ {
+ struct Lisp_Hash_Table *h = GET_HASH_TABLE (op);
+
+ op = hash_lookup (h, make_number (i), NULL);
+ if (op >= 0)
+ {
+ Lisp_Object opl;
+ opl = HASH_VALUE (h, op);
+ if (!INTEGERP (opl))
+ CCL_INVALID_CMD;
+ reg[RRR] = XINT (opl);
+ reg[7] = 1; /* r7 true for success */
+ }
+ else
+ reg[7] = 0;
+ }
+ break;
+
+ case CCL_IterateMultipleMap:
+ {
+ Lisp_Object map, content, attrib, value;
+ int point, size, fin_ic;
+
+ j = XINT (ccl_prog[ic++]); /* number of maps. */
+ fin_ic = ic + j;
+ op = reg[rrr];
+ if ((j > reg[RRR]) && (j >= 0))
+ {
+ ic += reg[RRR];
+ i = reg[RRR];
+ }
+ else
+ {
+ reg[RRR] = -1;
+ ic = fin_ic;
+ break;
+ }
+
+ for (;i < j;i++)
+ {
+
+ size = ASIZE (Vcode_conversion_map_vector);
+ point = XINT (ccl_prog[ic++]);
+ if (point >= size) continue;
+ map = AREF (Vcode_conversion_map_vector, point);
+
+ /* Check map varidity. */
+ if (!CONSP (map)) continue;
+ map = XCDR (map);
+ if (!VECTORP (map)) continue;
+ size = ASIZE (map);
+ if (size <= 1) continue;
+
+ content = AREF (map, 0);
+
+ /* check map type,
+ [STARTPOINT VAL1 VAL2 ...] or
+ [t ELELMENT STARTPOINT ENDPOINT] */
+ if (NUMBERP (content))
+ {
+ point = XUINT (content);
+ point = op - point + 1;
+ if (!((point >= 1) && (point < size))) continue;
+ content = AREF (map, point);
+ }
+ else if (EQ (content, Qt))
+ {
+ if (size != 4) continue;
+ if ((op >= XUINT (AREF (map, 2)))
+ && (op < XUINT (AREF (map, 3))))
+ content = AREF (map, 1);
+ else
+ continue;
+ }
+ else
+ continue;
+
+ if (NILP (content))
+ continue;
+ else if (NUMBERP (content))
+ {
+ reg[RRR] = i;
+ reg[rrr] = XINT(content);
+ break;
+ }
+ else if (EQ (content, Qt) || EQ (content, Qlambda))
+ {
+ reg[RRR] = i;
+ break;
+ }
+ else if (CONSP (content))
+ {
+ attrib = XCAR (content);
+ value = XCDR (content);
+ if (!NUMBERP (attrib) || !NUMBERP (value))
+ continue;
+ reg[RRR] = i;
+ reg[rrr] = XUINT (value);
+ break;
+ }
+ else if (SYMBOLP (content))
+ CCL_CALL_FOR_MAP_INSTRUCTION (content, fin_ic);
+ else
+ CCL_INVALID_CMD;
+ }
+ if (i == j)
+ reg[RRR] = -1;
+ ic = fin_ic;
+ }
+ break;
+
+ case CCL_MapMultiple:
+ {
+ Lisp_Object map, content, attrib, value;
+ int point, size, map_vector_size;
+ int map_set_rest_length, fin_ic;
+ int current_ic = this_ic;
+
+ /* inhibit recursive call on MapMultiple. */
+ if (stack_idx_of_map_multiple > 0)
+ {
+ if (stack_idx_of_map_multiple <= stack_idx)
+ {
+ stack_idx_of_map_multiple = 0;
+ mapping_stack_pointer = mapping_stack;
+ CCL_INVALID_CMD;
+ }
+ }
+ else
+ mapping_stack_pointer = mapping_stack;
+ stack_idx_of_map_multiple = 0;
+
+ map_set_rest_length =
+ XINT (ccl_prog[ic++]); /* number of maps and separators. */
+ fin_ic = ic + map_set_rest_length;
+ op = reg[rrr];
+
+ if ((map_set_rest_length > reg[RRR]) && (reg[RRR] >= 0))
+ {
+ ic += reg[RRR];
+ i = reg[RRR];
+ map_set_rest_length -= i;
+ }
+ else
+ {
+ ic = fin_ic;
+ reg[RRR] = -1;
+ mapping_stack_pointer = mapping_stack;
+ break;
+ }
+
+ if (mapping_stack_pointer <= (mapping_stack + 1))
+ {
+ /* Set up initial state. */
+ mapping_stack_pointer = mapping_stack;
+ PUSH_MAPPING_STACK (0, op);
+ reg[RRR] = -1;
+ }
+ else
+ {
+ /* Recover after calling other ccl program. */
+ int orig_op;
+
+ POP_MAPPING_STACK (map_set_rest_length, orig_op);
+ POP_MAPPING_STACK (map_set_rest_length, reg[rrr]);
+ switch (op)
+ {
+ case -1:
+ /* Regard it as Qnil. */
+ op = orig_op;
+ i++;
+ ic++;
+ map_set_rest_length--;
+ break;
+ case -2:
+ /* Regard it as Qt. */
+ op = reg[rrr];
+ i++;
+ ic++;
+ map_set_rest_length--;
+ break;
+ case -3:
+ /* Regard it as Qlambda. */
+ op = orig_op;
+ i += map_set_rest_length;
+ ic += map_set_rest_length;
+ map_set_rest_length = 0;
+ break;
+ default:
+ /* Regard it as normal mapping. */
+ i += map_set_rest_length;
+ ic += map_set_rest_length;
+ POP_MAPPING_STACK (map_set_rest_length, reg[rrr]);
+ break;
+ }
+ }
+ map_vector_size = ASIZE (Vcode_conversion_map_vector);
+
+ do {
+ for (;map_set_rest_length > 0;i++, ic++,
map_set_rest_length--)
+ {
+ point = XINT(ccl_prog[ic]);
+ if (point < 0)
+ {
+ /* +1 is for including separator. */
+ point = -point + 1;
+ if (mapping_stack_pointer
+ >= &mapping_stack[MAX_MAP_SET_LEVEL])
+ CCL_INVALID_CMD;
+ PUSH_MAPPING_STACK (map_set_rest_length - point,
+ reg[rrr]);
+ map_set_rest_length = point;
+ reg[rrr] = op;
+ continue;
+ }
+
+ if (point >= map_vector_size) continue;
+ map = AREF (Vcode_conversion_map_vector, point);
+
+ /* Check map varidity. */
+ if (!CONSP (map)) continue;
+ map = XCDR (map);
+ if (!VECTORP (map)) continue;
+ size = ASIZE (map);
+ if (size <= 1) continue;
+
+ content = AREF (map, 0);
+
+ /* check map type,
+ [STARTPOINT VAL1 VAL2 ...] or
+ [t ELEMENT STARTPOINT ENDPOINT] */
+ if (NUMBERP (content))
+ {
+ point = XUINT (content);
+ point = op - point + 1;
+ if (!((point >= 1) && (point < size))) continue;
+ content = AREF (map, point);
+ }
+ else if (EQ (content, Qt))
+ {
+ if (size != 4) continue;
+ if ((op >= XUINT (AREF (map, 2))) &&
+ (op < XUINT (AREF (map, 3))))
+ content = AREF (map, 1);
+ else
+ continue;
+ }
+ else
+ continue;
+
+ if (NILP (content))
+ continue;
+
+ reg[RRR] = i;
+ if (NUMBERP (content))
+ {
+ op = XINT (content);
+ i += map_set_rest_length - 1;
+ ic += map_set_rest_length - 1;
+ POP_MAPPING_STACK (map_set_rest_length, reg[rrr]);
+ map_set_rest_length++;
+ }
+ else if (CONSP (content))
+ {
+ attrib = XCAR (content);
+ value = XCDR (content);
+ if (!NUMBERP (attrib) || !NUMBERP (value))
+ continue;
+ op = XUINT (value);
+ i += map_set_rest_length - 1;
+ ic += map_set_rest_length - 1;
+ POP_MAPPING_STACK (map_set_rest_length, reg[rrr]);
+ map_set_rest_length++;
+ }
+ else if (EQ (content, Qt))
+ {
+ op = reg[rrr];
+ }
+ else if (EQ (content, Qlambda))
+ {
+ i += map_set_rest_length;
+ ic += map_set_rest_length;
+ break;
+ }
+ else if (SYMBOLP (content))
+ {
+ if (mapping_stack_pointer
+ >= &mapping_stack[MAX_MAP_SET_LEVEL])
+ CCL_INVALID_CMD;
+ PUSH_MAPPING_STACK (map_set_rest_length, reg[rrr]);
+ PUSH_MAPPING_STACK (map_set_rest_length, op);
+ stack_idx_of_map_multiple = stack_idx + 1;
+ CCL_CALL_FOR_MAP_INSTRUCTION (content, current_ic);
+ }
+ else
+ CCL_INVALID_CMD;
+ }
+ if (mapping_stack_pointer <= (mapping_stack + 1))
+ break;
+ POP_MAPPING_STACK (map_set_rest_length, reg[rrr]);
+ i += map_set_rest_length;
+ ic += map_set_rest_length;
+ POP_MAPPING_STACK (map_set_rest_length, reg[rrr]);
+ } while (1);
+
+ ic = fin_ic;
+ }
+ reg[rrr] = op;
+ break;
+
+ case CCL_MapSingle:
+ {
+ Lisp_Object map, attrib, value, content;
+ int size, point;
+ j = XINT (ccl_prog[ic++]); /* map_id */
+ op = reg[rrr];
+ if (j >= ASIZE (Vcode_conversion_map_vector))
+ {
+ reg[RRR] = -1;
+ break;
+ }
+ map = AREF (Vcode_conversion_map_vector, j);
+ if (!CONSP (map))
+ {
+ reg[RRR] = -1;
+ break;
+ }
+ map = XCDR (map);
+ if (!VECTORP (map))
+ {
+ reg[RRR] = -1;
+ break;
+ }
+ size = ASIZE (map);
+ point = XUINT (AREF (map, 0));
+ point = op - point + 1;
+ reg[RRR] = 0;
+ if ((size <= 1) ||
+ (!((point >= 1) && (point < size))))
+ reg[RRR] = -1;
+ else
+ {
+ reg[RRR] = 0;
+ content = AREF (map, point);
+ if (NILP (content))
+ reg[RRR] = -1;
+ else if (NUMBERP (content))
+ reg[rrr] = XINT (content);
+ else if (EQ (content, Qt));
+ else if (CONSP (content))
+ {
+ attrib = XCAR (content);
+ value = XCDR (content);
+ if (!NUMBERP (attrib) || !NUMBERP (value))
+ continue;
+ reg[rrr] = XUINT(value);
+ break;
+ }
+ else if (SYMBOLP (content))
+ CCL_CALL_FOR_MAP_INSTRUCTION (content, ic);
+ else
+ reg[RRR] = -1;
+ }
+ }
+ break;
+
+ default:
+ CCL_INVALID_CMD;
+ }
+ break;
+
+ default:
+ CCL_INVALID_CMD;
+ }
+ }
+
+ ccl_error_handler:
+ /* The suppress_error member is set when e.g. a CCL-based coding
+ system is used for terminal output. */
+ if (!ccl->suppress_error && destination)
+ {
+ /* We can insert an error message only if DESTINATION is
+ specified and we still have a room to store the message
+ there. */
+ char msg[256];
+ int msglen;
+
+ if (!dst)
+ dst = destination;
+
+ switch (ccl->status)
+ {
+ case CCL_STAT_INVALID_CMD:
+ sprintf(msg, "\nCCL: Invalid command %x (ccl_code = %x) at %d.",
+ code & 0x1F, code, this_ic);
+ #ifdef CCL_DEBUG
+ {
+ int i = ccl_backtrace_idx - 1;
+ int j;
+
+ msglen = strlen (msg);
+ if (dst + msglen <= (dst_bytes ? dst_end : src))
+ {
+ bcopy (msg, dst, msglen);
+ dst += msglen;
+ }
+
+ for (j = 0; j < CCL_DEBUG_BACKTRACE_LEN; j++, i--)
+ {
+ if (i < 0) i = CCL_DEBUG_BACKTRACE_LEN - 1;
+ if (ccl_backtrace_table[i] == 0)
+ break;
+ sprintf(msg, " %d", ccl_backtrace_table[i]);
+ msglen = strlen (msg);
+ if (dst + msglen > (dst_bytes ? dst_end : src))
+ break;
+ bcopy (msg, dst, msglen);
+ dst += msglen;
+ }
+ goto ccl_finish;
+ }
+ #endif
+ break;
+
+ case CCL_STAT_QUIT:
+ sprintf(msg, "\nCCL: Quited.");
+ break;
+
+ default:
+ sprintf(msg, "\nCCL: Unknown error type (%d).", ccl->status);
+ }
+
+ msglen = strlen (msg);
+ if (dst + msglen <= dst_end)
+ {
+ for (i = 0; i < msglen; i++)
+ *dst++ = msg[i];
+ }
+
+ if (ccl->status == CCL_STAT_INVALID_CMD)
+ {
+ #if 0 /* If the remaining bytes contain 0x80..0x9F, copying them
+ results in an invalid multibyte sequence. */
+
+ /* Copy the remaining source data. */
+ int i = src_end - src;
+ if (dst_bytes && (dst_end - dst) < i)
+ i = dst_end - dst;
+ bcopy (src, dst, i);
+ src += i;
+ dst += i;
+ #else
+ /* Signal that we've consumed everything. */
+ src = src_end;
+ #endif
+ }
+ }
+
+ ccl_finish:
+ ccl->ic = ic;
+ ccl->stack_idx = stack_idx;
+ ccl->prog = ccl_prog;
+ ccl->consumed = src - source;
+ ccl->produced = dst - destination;
+ }
+
+ /* Resolve symbols in the specified CCL code (Lisp vector). This
+ function converts symbols of code conversion maps and character
+ translation tables embeded in the CCL code into their ID numbers.
+
+ The return value is a vector (CCL itself or a new vector in which
+ all symbols are resolved), Qt if resolving of some symbol failed,
+ or nil if CCL contains invalid data. */
+
+ static Lisp_Object
+ resolve_symbol_ccl_program (ccl)
+ Lisp_Object ccl;
+ {
+ int i, veclen, unresolved = 0;
+ Lisp_Object result, contents, val;
+
+ result = ccl;
+ veclen = ASIZE (result);
+
+ for (i = 0; i < veclen; i++)
+ {
+ contents = AREF (result, i);
+ if (INTEGERP (contents))
+ continue;
+ else if (CONSP (contents)
+ && SYMBOLP (XCAR (contents))
+ && SYMBOLP (XCDR (contents)))
+ {
+ /* This is the new style for embedding symbols. The form is
+ (SYMBOL . PROPERTY). (get SYMBOL PROPERTY) should give
+ an index number. */
+
+ if (EQ (result, ccl))
+ result = Fcopy_sequence (ccl);
+
+ val = Fget (XCAR (contents), XCDR (contents));
+ if (NATNUMP (val))
+ AREF (result, i) = val;
+ else
+ unresolved = 1;
+ continue;
+ }
+ else if (SYMBOLP (contents))
+ {
+ /* This is the old style for embedding symbols. This style
+ may lead to a bug if, for instance, a translation table
+ and a code conversion map have the same name. */
+ if (EQ (result, ccl))
+ result = Fcopy_sequence (ccl);
+
+ val = Fget (contents, Qtranslation_table_id);
+ if (NATNUMP (val))
+ AREF (result, i) = val;
+ else
+ {
+ val = Fget (contents, Qcode_conversion_map_id);
+ if (NATNUMP (val))
+ AREF (result, i) = val;
+ else
+ {
+ val = Fget (contents, Qccl_program_idx);
+ if (NATNUMP (val))
+ AREF (result, i) = val;
+ else
+ unresolved = 1;
+ }
+ }
+ continue;
+ }
+ return Qnil;
+ }
+
+ return (unresolved ? Qt : result);
+ }
+
+ /* Return the compiled code (vector) of CCL program CCL_PROG.
+ CCL_PROG is a name (symbol) of the program or already compiled
+ code. If necessary, resolve symbols in the compiled code to index
+ numbers. If we failed to get the compiled code or to resolve
+ symbols, return Qnil. */
+
+ static Lisp_Object
+ ccl_get_compiled_code (ccl_prog)
+ Lisp_Object ccl_prog;
+ {
+ Lisp_Object val, slot;
+
+ if (VECTORP (ccl_prog))
+ {
+ val = resolve_symbol_ccl_program (ccl_prog);
+ return (VECTORP (val) ? val : Qnil);
+ }
+ if (!SYMBOLP (ccl_prog))
+ return Qnil;
+
+ val = Fget (ccl_prog, Qccl_program_idx);
+ if (! NATNUMP (val)
+ || XINT (val) >= ASIZE (Vccl_program_table))
+ return Qnil;
+ slot = AREF (Vccl_program_table, XINT (val));
+ if (! VECTORP (slot)
+ || ASIZE (slot) != 3
+ || ! VECTORP (AREF (slot, 1)))
+ return Qnil;
+ if (NILP (AREF (slot, 2)))
+ {
+ val = resolve_symbol_ccl_program (AREF (slot, 1));
+ if (! VECTORP (val))
+ return Qnil;
+ AREF (slot, 1) = val;
+ AREF (slot, 2) = Qt;
+ }
+ return AREF (slot, 1);
+ }
+
+ /* Setup fields of the structure pointed by CCL appropriately for the
+ execution of CCL program CCL_PROG. CCL_PROG is the name (symbol)
+ of the CCL program or the already compiled code (vector).
+ Return 0 if we succeed this setup, else return -1.
+
+ If CCL_PROG is nil, we just reset the structure pointed by CCL. */
+ int
+ setup_ccl_program (ccl, ccl_prog)
+ struct ccl_program *ccl;
+ Lisp_Object ccl_prog;
+ {
+ int i;
+
+ if (! NILP (ccl_prog))
+ {
+ struct Lisp_Vector *vp;
+
+ ccl_prog = ccl_get_compiled_code (ccl_prog);
+ if (! VECTORP (ccl_prog))
+ return -1;
+ vp = XVECTOR (ccl_prog);
+ ccl->size = vp->size;
+ ccl->prog = vp->contents;
+ ccl->eof_ic = XINT (vp->contents[CCL_HEADER_EOF]);
+ ccl->buf_magnification = XINT (vp->contents[CCL_HEADER_BUF_MAG]);
+ }
+ ccl->ic = CCL_HEADER_MAIN;
+ for (i = 0; i < 8; i++)
+ ccl->reg[i] = 0;
+ ccl->last_block = 0;
+ ccl->private_state = 0;
+ ccl->status = 0;
+ ccl->stack_idx = 0;
+ ccl->suppress_error = 0;
+ ccl->eight_bit_control = 0;
+ return 0;
+ }
+
+ DEFUN ("ccl-program-p", Fccl_program_p, Sccl_program_p, 1, 1, 0,
+ doc: /* Return t if OBJECT is a CCL program name or a compiled CCL
program code.
+ See the documentation of `define-ccl-program' for the detail of CCL program.
*/)
+ (object)
+ Lisp_Object object;
+ {
+ Lisp_Object val;
+
+ if (VECTORP (object))
+ {
+ val = resolve_symbol_ccl_program (object);
+ return (VECTORP (val) ? Qt : Qnil);
+ }
+ if (!SYMBOLP (object))
+ return Qnil;
+
+ val = Fget (object, Qccl_program_idx);
+ return ((! NATNUMP (val)
+ || XINT (val) >= ASIZE (Vccl_program_table))
+ ? Qnil : Qt);
+ }
+
+ DEFUN ("ccl-execute", Fccl_execute, Sccl_execute, 2, 2, 0,
+ doc: /* Execute CCL-PROGRAM with registers initialized by REGISTERS.
+
+ CCL-PROGRAM is a CCL program name (symbol)
+ or compiled code generated by `ccl-compile' (for backward compatibility.
+ In the latter case, the execution overhead is bigger than in the former).
+ No I/O commands should appear in CCL-PROGRAM.
+
+ REGISTERS is a vector of [R0 R1 ... R7] where RN is an initial value
+ for the Nth register.
+
+ As side effect, each element of REGISTERS holds the value of
+ the corresponding register after the execution.
+
+ See the documentation of `define-ccl-program' for a definition of CCL
+ programs. */)
+ (ccl_prog, reg)
+ Lisp_Object ccl_prog, reg;
+ {
+ struct ccl_program ccl;
+ int i;
+
+ if (setup_ccl_program (&ccl, ccl_prog) < 0)
+ error ("Invalid CCL program");
+
+ CHECK_VECTOR (reg);
+ if (ASIZE (reg) != 8)
+ error ("Length of vector REGISTERS is not 8");
+
+ for (i = 0; i < 8; i++)
+ ccl.reg[i] = (INTEGERP (AREF (reg, i))
+ ? XINT (AREF (reg, i))
+ : 0);
+
+ ccl_driver (&ccl, NULL, NULL, 0, 0, Qnil);
+ QUIT;
+ if (ccl.status != CCL_STAT_SUCCESS)
+ error ("Error in CCL program at %dth code", ccl.ic);
+
+ for (i = 0; i < 8; i++)
+ XSETINT (AREF (reg, i), ccl.reg[i]);
+ return Qnil;
+ }
+
+ DEFUN ("ccl-execute-on-string", Fccl_execute_on_string,
Sccl_execute_on_string,
+ 3, 5, 0,
+ doc: /* Execute CCL-PROGRAM with initial STATUS on STRING.
+
+ CCL-PROGRAM is a symbol registered by register-ccl-program,
+ or a compiled code generated by `ccl-compile' (for backward compatibility,
+ in this case, the execution is slower).
+
+ Read buffer is set to STRING, and write buffer is allocated automatically.
+
+ STATUS is a vector of [R0 R1 ... R7 IC], where
+ R0..R7 are initial values of corresponding registers,
+ IC is the instruction counter specifying from where to start the program.
+ If R0..R7 are nil, they are initialized to 0.
+ If IC is nil, it is initialized to head of the CCL program.
+
+ If optional 4th arg CONTINUE is non-nil, keep IC on read operation
+ when read buffer is exausted, else, IC is always set to the end of
+ CCL-PROGRAM on exit.
+
+ It returns the contents of write buffer as a string,
+ and as side effect, STATUS is updated.
+ If the optional 5th arg UNIBYTE-P is non-nil, the returned string
+ is a unibyte string. By default it is a multibyte string.
+
+ See the documentation of `define-ccl-program' for the detail of CCL program.
*/)
+ (ccl_prog, status, str, contin, unibyte_p)
+ Lisp_Object ccl_prog, status, str, contin, unibyte_p;
+ {
+ Lisp_Object val;
+ struct ccl_program ccl;
+ int i;
+ int outbufsize;
+ unsigned char *outbuf, *outp;
+ int str_chars, str_bytes;
+ #define CCL_EXECUTE_BUF_SIZE 1024
+ int source[CCL_EXECUTE_BUF_SIZE], destination[CCL_EXECUTE_BUF_SIZE];
+ int consumed_chars, consumed_bytes, produced_chars;
+
+ if (setup_ccl_program (&ccl, ccl_prog) < 0)
+ error ("Invalid CCL program");
+
+ CHECK_VECTOR (status);
+ if (ASIZE (status) != 9)
+ error ("Length of vector STATUS is not 9");
+ CHECK_STRING (str);
+
+ str_chars = SCHARS (str);
+ str_bytes = SBYTES (str);
+
+ for (i = 0; i < 8; i++)
+ {
+ if (NILP (AREF (status, i)))
+ XSETINT (AREF (status, i), 0);
+ if (INTEGERP (AREF (status, i)))
+ ccl.reg[i] = XINT (AREF (status, i));
+ }
+ if (INTEGERP (AREF (status, i)))
+ {
+ i = XFASTINT (AREF (status, 8));
+ if (ccl.ic < i && i < ccl.size)
+ ccl.ic = i;
+ }
+
+ outbufsize = (ccl.buf_magnification
+ ? str_bytes * ccl.buf_magnification + 256
+ : str_bytes + 256);
+ outp = outbuf = (unsigned char *) xmalloc (outbufsize);
+
+ consumed_chars = consumed_bytes = 0;
+ produced_chars = 0;
+ while (consumed_bytes < str_bytes)
+ {
+ const unsigned char *p = SDATA (str) + consumed_bytes;
+ const unsigned char *endp = SDATA (str) + str_bytes;
+ int i = 0;
+ int *src, src_size;
+
+ if (endp - p == str_chars - consumed_chars)
+ while (i < CCL_EXECUTE_BUF_SIZE && p < endp)
+ source[i++] = *p++;
+ else
+ while (i < CCL_EXECUTE_BUF_SIZE && p < endp)
+ source[i++] = STRING_CHAR_ADVANCE (p);
+ consumed_chars += i;
+ consumed_bytes = p - SDATA (str);
+
+ if (consumed_bytes == str_bytes)
+ ccl.last_block = NILP (contin);
+ src = source;
+ src_size = i;
+ while (1)
+ {
+ ccl_driver (&ccl, src, destination, src_size, CCL_EXECUTE_BUF_SIZE,
+ Qnil);
+ if (ccl.status != CCL_STAT_SUSPEND_BY_DST)
+ break;
+ produced_chars += ccl.produced;
+ if (NILP (unibyte_p))
+ {
+ if (outp - outbuf + MAX_MULTIBYTE_LENGTH * ccl.produced
+ > outbufsize)
+ {
+ int offset = outp - outbuf;
+ outbufsize += MAX_MULTIBYTE_LENGTH * ccl.produced;
+ outbuf = (unsigned char *) xrealloc (outbuf, outbufsize);
+ outp = outbuf + offset;
+ }
+ for (i = 0; i < ccl.produced; i++)
+ CHAR_STRING_ADVANCE (destination[i], outp);
+ }
+ else
+ {
+ if (outp - outbuf + ccl.produced > outbufsize)
+ {
+ int offset = outp - outbuf;
+ outbufsize += ccl.produced;
+ outbuf = (unsigned char *) xrealloc (outbuf, outbufsize);
+ outp = outbuf + offset;
+ }
+ for (i = 0; i < ccl.produced; i++)
+ *outp++ = destination[i];
+ }
+ src += ccl.consumed;
+ src_size -= ccl.consumed;
+ }
+
+ if (ccl.status != CCL_STAT_SUSPEND_BY_SRC)
+ break;
+ }
+
+ if (ccl.status != CCL_STAT_SUCCESS
+ && ccl.status != CCL_STAT_SUSPEND_BY_SRC)
+ error ("Error in CCL program at %dth code", ccl.ic);
+
+ for (i = 0; i < 8; i++)
+ XSET (XVECTOR (status)->contents[i], Lisp_Int, ccl.reg[i]);
+ XSETINT (XVECTOR (status)->contents[8], ccl.ic);
+
+ if (NILP (unibyte_p))
+ val = make_multibyte_string ((char *) outbuf, produced_chars,
+ outp - outbuf);
+ else
+ val = make_unibyte_string ((char *) outbuf, produced_chars);
+ xfree (outbuf);
+
+ return val;
+ }
+
+ DEFUN ("register-ccl-program", Fregister_ccl_program, Sregister_ccl_program,
+ 2, 2, 0,
+ doc: /* Register CCL program CCL_PROG as NAME in `ccl-program-table'.
+ CCL_PROG should be a compiled CCL program (vector), or nil.
+ If it is nil, just reserve NAME as a CCL program name.
+ Return index number of the registered CCL program. */)
+ (name, ccl_prog)
+ Lisp_Object name, ccl_prog;
+ {
+ int len = ASIZE (Vccl_program_table);
+ int idx;
+ Lisp_Object resolved;
+
+ CHECK_SYMBOL (name);
+ resolved = Qnil;
+ if (!NILP (ccl_prog))
+ {
+ CHECK_VECTOR (ccl_prog);
+ resolved = resolve_symbol_ccl_program (ccl_prog);
+ if (NILP (resolved))
+ error ("Error in CCL program");
+ if (VECTORP (resolved))
+ {
+ ccl_prog = resolved;
+ resolved = Qt;
+ }
+ else
+ resolved = Qnil;
+ }
+
+ for (idx = 0; idx < len; idx++)
+ {
+ Lisp_Object slot;
+
+ slot = AREF (Vccl_program_table, idx);
+ if (!VECTORP (slot))
+ /* This is the first unsed slot. Register NAME here. */
+ break;
+
+ if (EQ (name, AREF (slot, 0)))
+ {
+ /* Update this slot. */
+ AREF (slot, 1) = ccl_prog;
+ AREF (slot, 2) = resolved;
+ return make_number (idx);
+ }
+ }
+
+ if (idx == len)
+ {
+ /* Extend the table. */
+ Lisp_Object new_table;
+ int j;
+
+ new_table = Fmake_vector (make_number (len * 2), Qnil);
+ for (j = 0; j < len; j++)
+ AREF (new_table, j)
+ = AREF (Vccl_program_table, j);
+ Vccl_program_table = new_table;
+ }
+
+ {
+ Lisp_Object elt;
+
+ elt = Fmake_vector (make_number (3), Qnil);
+ AREF (elt, 0) = name;
+ AREF (elt, 1) = ccl_prog;
+ AREF (elt, 2) = resolved;
+ AREF (Vccl_program_table, idx) = elt;
+ }
+
+ Fput (name, Qccl_program_idx, make_number (idx));
+ return make_number (idx);
+ }
+
+ /* Register code conversion map.
+ A code conversion map consists of numbers, Qt, Qnil, and Qlambda.
+ The first element is the start code point.
+ The other elements are mapped numbers.
+ Symbol t means to map to an original number before mapping.
+ Symbol nil means that the corresponding element is empty.
+ Symbol lambda means to terminate mapping here.
+ */
+
+ DEFUN ("register-code-conversion-map", Fregister_code_conversion_map,
+ Sregister_code_conversion_map,
+ 2, 2, 0,
+ doc: /* Register SYMBOL as code conversion map MAP.
+ Return index number of the registered map. */)
+ (symbol, map)
+ Lisp_Object symbol, map;
+ {
+ int len = ASIZE (Vcode_conversion_map_vector);
+ int i;
+ Lisp_Object index;
+
+ CHECK_SYMBOL (symbol);
+ CHECK_VECTOR (map);
+
+ for (i = 0; i < len; i++)
+ {
+ Lisp_Object slot = AREF (Vcode_conversion_map_vector, i);
+
+ if (!CONSP (slot))
+ break;
+
+ if (EQ (symbol, XCAR (slot)))
+ {
+ index = make_number (i);
+ XSETCDR (slot, map);
+ Fput (symbol, Qcode_conversion_map, map);
+ Fput (symbol, Qcode_conversion_map_id, index);
+ return index;
+ }
+ }
+
+ if (i == len)
+ {
+ Lisp_Object new_vector = Fmake_vector (make_number (len * 2), Qnil);
+ int j;
+
+ for (j = 0; j < len; j++)
+ AREF (new_vector, j)
+ = AREF (Vcode_conversion_map_vector, j);
+ Vcode_conversion_map_vector = new_vector;
+ }
+
+ index = make_number (i);
+ Fput (symbol, Qcode_conversion_map, map);
+ Fput (symbol, Qcode_conversion_map_id, index);
+ AREF (Vcode_conversion_map_vector, i) = Fcons (symbol, map);
+ return index;
+ }
+
+
+ void
+ syms_of_ccl ()
+ {
+ staticpro (&Vccl_program_table);
+ Vccl_program_table = Fmake_vector (make_number (32), Qnil);
+
+ Qccl = intern ("ccl");
+ staticpro (&Qccl);
+
+ Qcclp = intern ("cclp");
+ staticpro (&Qcclp);
+
+ Qccl_program = intern ("ccl-program");
+ staticpro (&Qccl_program);
+
+ Qccl_program_idx = intern ("ccl-program-idx");
+ staticpro (&Qccl_program_idx);
+
+ Qcode_conversion_map = intern ("code-conversion-map");
+ staticpro (&Qcode_conversion_map);
+
+ Qcode_conversion_map_id = intern ("code-conversion-map-id");
+ staticpro (&Qcode_conversion_map_id);
+
+ DEFVAR_LISP ("code-conversion-map-vector", &Vcode_conversion_map_vector,
+ doc: /* Vector of code conversion maps. */);
+ Vcode_conversion_map_vector = Fmake_vector (make_number (16), Qnil);
+
+ DEFVAR_LISP ("font-ccl-encoder-alist", &Vfont_ccl_encoder_alist,
+ doc: /* Alist of fontname patterns vs corresponding CCL program.
+ Each element looks like (REGEXP . CCL-CODE),
+ where CCL-CODE is a compiled CCL program.
+ When a font whose name matches REGEXP is used for displaying a character,
+ CCL-CODE is executed to calculate the code point in the font
+ from the charset number and position code(s) of the character which are set
+ in CCL registers R0, R1, and R2 before the execution.
+ The code point in the font is set in CCL registers R1 and R2
+ when the execution terminated.
+ If the font is single-byte font, the register R2 is not used. */);
+ Vfont_ccl_encoder_alist = Qnil;
+
+ DEFVAR_LISP ("translation-hash-table-vector",
&Vtranslation_hash_table_vector,
+ doc: /* Vector containing all translation hash tables ever defined.
+ Comprises pairs (SYMBOL . TABLE) where SYMBOL and TABLE were set up by calls
+ to `define-translation-hash-table'. The vector is indexed by the table id
+ used by CCL. */);
+ Vtranslation_hash_table_vector = Qnil;
+
+ defsubr (&Sccl_program_p);
+ defsubr (&Sccl_execute);
+ defsubr (&Sccl_execute_on_string);
+ defsubr (&Sregister_ccl_program);
+ defsubr (&Sregister_code_conversion_map);
+ }
- [Emacs-diffs] Changes to emacs/src/ccl.c [emacs-unicode-2],
Kenichi Handa <=