[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/man/idlwave.texi
|
From: |
John-David T. Smith |
|
Subject: |
[Emacs-diffs] Changes to emacs/man/idlwave.texi |
|
Date: |
Thu, 06 Apr 2006 18:56:09 +0000 |
Index: emacs/man/idlwave.texi
diff -u emacs/man/idlwave.texi:1.38 emacs/man/idlwave.texi:1.39
--- emacs/man/idlwave.texi:1.38 Sat Mar 25 23:13:20 2006
+++ emacs/man/idlwave.texi Thu Apr 6 18:56:09 2006
@@ -9,16 +9,17 @@
@synindex ky cp
@syncodeindex vr cp
@syncodeindex fn cp
address@hidden VERSION 5.5
address@hidden EDITION 5.5
address@hidden IDLVERSION 6.1
address@hidden NSYSROUTINES 1850
address@hidden NSYSKEYWORDS 7685
address@hidden DATE March, 2005
address@hidden VERSION 6.0
address@hidden EDITION 6.0
address@hidden IDLVERSION 6.2
address@hidden NSYSROUTINES 1966
address@hidden DATE Feb, 2006
@set AUTHOR J.D. Smith & Carsten Dominik
address@hidden AUTHOR-EMAIL jdsmith@@as.arizona.edu
address@hidden AUTHOREMAIL jdsmith@@as.arizona.edu
@set MAINTAINER J.D. Smith
address@hidden MAINTAINER-EMAIL jdsmith@@as.arizona.edu
address@hidden MAINTAINEREMAIL jdsmith@@as.arizona.edu
address@hidden PARTOFEMACS
address@hidden IDLWAVEHOMEPAGE http://idlwave.org/
@c %**end of header
@finalout
@@ -29,8 +30,8 @@
This is edition @value{EDITION} of the IDLWAVE User Manual for IDLWAVE
@value{VERSION}
-Copyright @copyright{} 1999, 2000, 2001, 2002, 2003, 2004,
-2005, 2006 Free Software Foundation, Inc.
+Copyright @copyright{} 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+ 2006 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2 or
@@ -60,8 +61,8 @@
This is edition @value{EDITION} of the @cite{IDLWAVE User Manual} for
IDLWAVE version @value{VERSION}, @value{DATE}.
@sp 2
-Copyright @copyright{} 1999, 2000, 2001, 2002, 2003, 2004,
-2005, 2006 Free Software Foundation, Inc.
+Copyright @copyright{} 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+ 2006 Free Software Foundation, Inc.
@sp 2
@cindex Copyright, of IDLWAVE
Permission is granted to copy, distribute and/or modify this document
@@ -100,6 +101,9 @@
* Getting Started:: Tutorial
* The IDLWAVE Major Mode:: The mode for editing IDL programs
* The IDLWAVE Shell:: The mode for running IDL as an inferior program
address@hidden PARTOFEMACS
+* Installation:: How to Install or Upgrade
address@hidden ifclear
* Acknowledgements:: Who did what
* Sources of Routine Info:: How does IDLWAVE know about routine XYZ
* HTML Help Browser Tips::
@@ -178,6 +182,13 @@
* Walking the Calling Stack::
* Electric Debug Mode::
address@hidden PARTOFEMACS
+Installation
+
+* Installing IDLWAVE:: How to install the distribution
+* Installing Online Help:: Where to get the additional files needed
address@hidden ifclear
+
Sources of Routine Info
* Routine Definitions:: Where IDL Routines are defined.
@@ -197,6 +208,8 @@
@node Introduction, IDLWAVE in a Nutshell, Top, Top
@chapter Introduction
@cindex Introduction
address@hidden CORBA (Common Object Request Broker Architecture)
address@hidden Interface Definition Language
@cindex Interactive Data Language
@cindex cc-mode.el
@cindex @file{idl.el}
@@ -204,15 +217,17 @@
@cindex Feature overview
IDLWAVE is a package which supports editing source files written in
-the Interactive Data Language, and running
-IDL as an inferior address@hidden that this package has nothing
-to do with the Interface Definition Language, part of the Common
-Object Request Broker Architecture (CORBA)address@hidden can also
-be used for editing source files for the related WAVE/CL language, but
-with only limited support.}. It is a feature-rich replacement for the
-IDLDE development environment included with IDL, and uses the full
-power of Emacs to make editing and running IDL programs easier,
-quicker, and more structured.
+the Interactive Data Language (address@hidden
address@hidden PARTOFEMACS
address@hidden is a registered
+trademark of Research Systems, address@hidden
address@hidden ifclear
+), and running IDL as an inferior address@hidden can also be used
+for editing source files for the related WAVE/CL language, but with only
+limited support.}. It is a feature-rich replacement for the IDLDE
+development environment included with IDL, and uses the full power of
+Emacs to make editing and running IDL programs easier, quicker, and more
+structured.
IDLWAVE consists of two main parts: a major mode for editing IDL
source files (@code{idlwave-mode}) and a mode for running the IDL
@@ -231,8 +246,6 @@
than 1000 native IDL routines, extendible to any additional number of
local routines, and already available with many pre-scanned libraries.
@item
-Routine name space conflict search with likelihood-of-use ranking.
address@hidden
Fast, context-sensitive online HTML help, or source-header help for
undocumented routines.
@item
@@ -246,6 +259,8 @@
@item
Integrity checks and auto-termination of logical blocks.
@item
+Routine name space conflict search with likelihood-of-use ranking.
address@hidden
Support for @file{imenu} (Emacs) and @file{func-menu} (XEmacs).
@item
Documentation support.
@@ -254,6 +269,9 @@
editing and all the completion and routine info capabilities present in
IDL source buffers.
@item
+Full handling of debugging with breakpoints, with interactive setting
+of break conditions, and easy stepping through code.
address@hidden
Compilation, execution and interactive single-keystroke debugging of
programs directly from the source buffer.
@item
@@ -311,10 +329,12 @@
@tab Indent the current line relative to context.
@item @kbd{C-M-\}
@tab Re-indent all lines in the current region.
address@hidden @kbd{C-M-q}
address@hidden Re-indent all lines in the current routine.
@item @kbd{C-u @key{TAB}}
@tab Re-indent all lines in the current statement.
@item @address@hidden
address@hidden Start a continuation line, or split the current line at point.
address@hidden Start a continuation line, splitting the current line at point.
@item @kbd{M-q}
@tab Fill the current comment paragraph.
@item @kbd{C-c ?}
@@ -340,10 +360,10 @@
@multitable @columnfractions .15 .85
@item @kbd{C-c C-s}
address@hidden Start IDL as a subprocess and/or switch to the interaction
buffer.
address@hidden @kbd{M-p}
address@hidden Start IDL as a subprocess and/or switch to the shell buffer.
address@hidden @key{Up}, @kbd{M-p}
@tab Cycle back through IDL command history.
address@hidden @kbd{M-n}
address@hidden @key{Down},@kbd{M-n}
@tab Cycle forward.
@item @address@hidden
@tab Complete a procedure name, function name or keyword in the shell buffer.
@@ -368,12 +388,9 @@
@subheading Commonly used Settings in @file{.emacs}
@lisp
;; Change the indentation preferences
-(setq idlwave-main-block-indent 2 ; default 0
- idlwave-block-indent 2 ; default 4
- idlwave-end-offset -2) ; default -4
;; Start autoloading routine info after 2 idle seconds
(setq idlwave-init-rinfo-when-idle-after 2)
-;; Pad some operators with spaces
+;; Pad operators with spaces
(setq idlwave-do-actions t
idlwave-surround-by-blank t)
;; Syntax Highlighting
@@ -384,9 +401,10 @@
(setq idlwave-shell-debug-modifiers '(control shift))
@end lisp
address@hidden
address@hidden
<A NAME="TUTORIAL"></A>
address@hidden ifhtml
address@hidden html
+
@node Getting Started, The IDLWAVE Major Mode, IDLWAVE in a Nutshell, Top
@chapter Getting Started (Tutorial)
@cindex Quick-Start
@@ -411,10 +429,14 @@
shoulder of your nearest IDLWAVE guru for a few days.
It is assumed that you have access to Emacs or XEmacs with the full
-IDLWAVE package including online help. We also assume that you are
-familiar with Emacs and can read the nomenclature of key presses in
-Emacs (in particular, @kbd{C} stands for @key{CONTROL} and @kbd{M} for
address@hidden (often the @key{ALT} key carries this functionality)).
+IDLWAVE package including online address@hidden
address@hidden PARTOFEMACS
+@ (@pxref{Installation})@c
address@hidden ifclear
+. We also assume that you are familiar with Emacs and can read the
+nomenclature of key presses in Emacs (in particular, @kbd{C} stands
+for @key{CONTROL} and @kbd{M} for @key{META} (often the @key{ALT} key
+carries this functionality)).
Open a new source file by typing:
@@ -490,7 +512,7 @@
Now go back to the source window and type @kbd{C-c C-d C-c} to compile
the program. If you watch the shell buffer, you see that IDLWAVE types
address@hidden tutorial.pro} for you. But the compilation fails because
address@hidden "tutorial.pro"} for you. But the compilation fails because
there is a comma in the line @samp{years=...}. The line with the error
is highlighted and the cursor positioned at the error, so remove the
comma (you should only need to hit @kbd{Delete}!). Compile again, using
@@ -548,7 +570,7 @@
plot_wday,1,4
@end example
-Oops, this looks very wrong. All April fool's days cannot be Fridays!
+Oops, this looks very wrong. All April Fool's days cannot be Fridays!
We've got a bug in the program, perhaps in the @code{daynr} function.
Let's put a breakpoint on the last line there. Position the cursor on
the @samp{return, d+...} line and press @kbd{C-c C-d C-b}. IDL sets a
@@ -576,12 +598,12 @@
@node Lesson II -- Customization, Lesson III -- User Catalog, Lesson I --
Development Cycle, Getting Started
@section Lesson II: Customization
-Emacs is probably the most customizable piece of software ever
-written, and it would be a shame if you did not make use of this and
-adapt IDLWAVE to your own preferences. Customizing Emacs or IDLWAVE
-is accomplished by setting Lisp variables in the @file{.emacs} file in
-your home directory --- but do not be dismayed; for the most part, you
-can just copy and work from the examples given here.
+Emacs is probably the most customizable piece of software ever written,
+and it would be a shame if you did not make use of this to adapt IDLWAVE
+to your own preferences. Customizing Emacs or IDLWAVE is accomplished
+by setting Lisp variables in the @file{.emacs} file in your home
+directory --- but do not be dismayed; for the most part, you can just
+copy and work from the examples given here.
Let's first use a boolean variable. These are variables which you turn
on or off, much like a checkbox. A value of @samp{t} means on, a value
@@ -600,12 +622,12 @@
restart Emacs.
You likely have your own indentation preferences for IDL code. For
-example, some like to indent the main block of an IDL program from the
-margin and use only 3 spaces as indentation between @code{BEGIN} and
address@hidden Try the following lines in @file{.emacs}:
+example, some may prefer to indent the main block of an IDL program
+slightly from the margin and use only 3 spaces as indentation between
address@hidden and @code{END}. Try the following lines in @file{.emacs}:
@lisp
-(setq idlwave-main-block-indent 2)
+(setq idlwave-main-block-indent 1)
(setq idlwave-block-indent 3)
(setq idlwave-end-offset -3)
@end lisp
@@ -810,25 +832,26 @@
@cindex Foreign code, adapting
@cindex Indentation, of foreign code
@kindex C-M-\
-To re-indent a larger portion of code (e.g. when working with foreign code
-written with different conventions), use @kbd{C-M-\}
+To re-indent a larger portion of code (e.g. when working with foreign
+code written with different conventions), use @kbd{C-M-\}
(@code{indent-region}) after marking the relevant code. Useful marking
-commands are @kbd{C-x h} (the entire file) or @kbd{C-M-h} (the
-current subprogram). @xref{Actions}, for information how to impose
-additional formatting conventions on foreign code.
+commands are @kbd{C-x h} (the entire file) or @kbd{C-M-h} (the current
+subprogram). The command @kbd{C-M-q} reindents the entire current
+routine. @xref{Actions}, for information how to impose additional
+formatting conventions on foreign code.
address@hidden idlwave-main-block-indent (@code{0})
address@hidden idlwave-main-block-indent (@code{2})
Extra indentation for the main block of code. That is the block between
the FUNCTION/PRO statement and the END statement for that program
unit.
@end defopt
address@hidden idlwave-block-indent (@code{4})
address@hidden idlwave-block-indent (@code{3})
Extra indentation applied to block lines. If you change this, you
probably also want to change @code{idlwave-end-offset}.
@end defopt
address@hidden idlwave-end-offset (@code{-4})
address@hidden idlwave-end-offset (@code{-3})
Extra indentation applied to block END lines. A value equal to negative
@code{idlwave-block-indent} will make END lines line up with the block
BEGIN lines.
@@ -884,8 +907,8 @@
statements with special continuation indentation, especially if
@code{idlwave-max-extra-continuation-indent} is small, the key
@kbd{C-u @key{TAB}} will re-indent all lines in the current statement.
-Note that @code{idlwave-indent-to-open-paren}, if address@hidden, overrides
-the @code{idlwave-max-extra-continuation-indent} limit, for
+Note that @code{idlwave-indent-to-open-paren}, if address@hidden,
+overrides the @code{idlwave-max-extra-continuation-indent} limit, for
parentheses only, forcing them always to line up.
@@ -1254,9 +1277,9 @@
@end defopt
address@hidden
address@hidden
<A NAME="ONLINE_HELP"></A>
address@hidden ifhtml
address@hidden html
@node Online Help, Completion, Routine Info, The IDLWAVE Major Mode
@section Online Help
@@ -1266,19 +1289,34 @@
@cindex Installing online help
@cindex Online Help, Installation
@cindex Speed, of online help
address@hidden XML Help Catalog
-IDLWAVE can display help from an HTML version of the IDL documentation
-if it is available. This is @emph{much} faster than using the IDL
-online help application, because IDLWAVE usually gets you to the right
-place in the documentation directly --- e.g. a specific keyword of a
-routine --- without any additional browsing and scrolling. There are
-a variety of options for displaying the HTML help: see below. Help
-for routines without HTML documentation is also available, using the
-routine documentation header and/or source.
-
-To make this feature work, you should set
address@hidden to the directory name of the
-directory where the IDL help files are installed.
+For IDL system routines, extensive documentation is supplied with IDL.
+IDLWAVE can access the HTML version of this documentation very quickly
+and accurately, based on the local context. This can be @emph{much}
+faster than using the IDL online help application, because IDLWAVE
+usually gets you to the right place in the documentation directly ---
+e.g. a specific keyword of a routine --- without any additional browsing
+and scrolling.
+
+For this online help to work, an HTML version of the IDL documentation
+is required. Beginning with IDL 6.2, HTML documentation is distributed
+directly with IDL, along with an XML-based catalog of routine
+information. By default, IDLWAVE automatically attempts to convert this
+XML catalog into a format Emacs can more easily understand, and caches
+this information in your @code{idlwave_config_directory}
+(@file{~/.idlwave/}, by default). It also re-scans the XML catalog if
+it is newer than the current cached version. You can force rescan with
+the menu entry @code{IDLWAVE->Routine Info->Rescan XML Help Catalog}.
+
+Before IDL 6.2, the HTML help was not distributed with IDL, and was not
+part of the standalone IDLWAVE distribution, but had to be downloaded
+separately. This is no longer necessary: all help and routine
+information is supplied with IDL versions 6.2 and later.
+
+There are a variety of options for displaying the HTML help: see below.
+Help for routines without HTML documentation is also available, by using
+the routine documentation header and/or routine source.
@kindex M-?
In any IDL program (or, as with most IDLWAVE commands, in the IDL
@@ -1288,19 +1326,21 @@
@cindex Context, for online help
@multitable @columnfractions .25 .75
address@hidden @i{Routine name}
address@hidden @i{Routine names}
@tab The name of a routine (function, procedure, method).
address@hidden @i{Keyword Parameter}
address@hidden @i{Keyword Parameters}
@tab A keyword parameter of a routine.
address@hidden @i{System Variable}
address@hidden @i{System Variables}
@tab System variables like @code{!DPI}.
@item @i{System Variable Tags}
@tab System variables tags like @code{!D.X_SIZE}.
address@hidden @i{IDL Statement}
address@hidden @i{IDL Statements}
@tab Statements like @code{PRO}, @code{REPEAT}, @code{COMPILE_OPT}, etc.
address@hidden @i{Class name}
address@hidden @i{IDL Controls}
address@hidden Control structures like @code{FOR}, @code{SWITCH}, etc.
address@hidden @i{Class names}
@tab A class name in an @code{OBJ_NEW} call.
address@hidden @i{Class Init}
address@hidden @i{Class Init Keywords}
@tab Beyond the class name in an @code{OBJ_NEW} call.
@item @i{Executive Command}
@tab An executive command like @code{.RUN}. Mostly useful in the shell.
@@ -1352,52 +1392,62 @@
@cindex HTML Help
@cindex Help using HTML manuals
@cindex IDL manual, HTML version
address@hidden IDL Assistant
Help using the HTML documentation is invoked with the built-in Emacs
command @code{browse-url}, which displays the relevant help topic in a
-browser of your choosing. There are many possible browsers to choose
+browser of your choosing. Beginning with version 6.2, IDL comes with
+the help browser @emph{IDL Assistant}, which it uses by default for
+displaying online help on all supported platforms. This browser
+offers topical searches, an index, and is also now the default and
+recommended IDLWAVE help browser. The variable
address@hidden controls whether this browser is
+used. Note that, due to limitations in the Assistant, invoking help
+within IDLWAVE and @code{? topic} within IDL will result in two
+running copies of Assistant.
+
+Aside from the IDL Assistant, there are many possible browsers to choose
among, with differing advantages and disadvantages. The variable
address@hidden controls which browser help is
-sent to. This function is used to set the variable
address@hidden locally for IDLWAVE help only.
-Customize this variable to see what choices of browsers your system
-offers.
-
-Certain browsers like @code{w3} and @code{w3m}
-(@uref{http://emacs-w3m.namazu.org/}, the author's help browser of
-choice) are run within Emacs, and use Emacs buffers to display the
-HTML help. This can be convenient, especially on small displays, and
-images can even be displayed in-line on new Emacs versions. However,
-better formatting results are often achieved with external browsers,
-like Mozilla. IDLWAVE assumes any browser function containing "w3" is
-displayed in a local buffer. If you are using another Emacs-local
-browser for which this is not true, set the variable
address@hidden
-
address@hidden For Windows users}: IDLWAVE can bring up help directly
-from the Microsoft HTMLHelp documentation supplied with IDL: no
-additional help files are needed. Be sure to set
address@hidden and the help file will be found
-automatically (or, alternatively, specify its location directly with
address@hidden). The variable
address@hidden controls whether HTMLHelp is used, and
-which application is called to invoke it (@code{HH} is the default).
-The free helper application @code{KEYHH}
-(@uref{http://www.keyworks.net/keyhh.htm}) can be used instead, and is
-preferrable, as it permits loading new help topics into the same help
-window. @code{KEYHH} must be downloaded and installed separately.
address@hidden controls which browser help is sent
+to (as long as @code{idlwave-help-use-assistant} is not set). This
+function is used to set the variable @code{browse-url-browser-function}
+locally for IDLWAVE help only. Customize the latter variable to see
+what choices of browsers your system offers. Certain browsers like
address@hidden (bundled with many versions of Emacs) and @code{w3m}
+(@uref{http://emacs-w3m.namazu.org/}) are run within Emacs, and use
+Emacs buffers to display the HTML help. This can be convenient,
+especially on small displays, and images can even be displayed in-line
+on newer Emacs versions. However, better formatting results are often
+achieved with external browsers, like Mozilla. IDLWAVE assumes any
+browser function containing "w3" is displayed in a local buffer. If you
+are using another Emacs-local browser for which this is not true, set
+the variable @code{idlwave-help-browser-is-local}.
+
+With IDL 6.2 or later, it is important to ensure that the variable
address@hidden is set (@pxref{Catalogs}). One easy way
+to ensure this is to run the IDL Shell (@kbd{C-c C-s}). It will be
+queried for this directory, and the results will be cached to file for
+subsequent use.
@xref{HTML Help Browser Tips}, for more information on selecting and
configuring a browser for use with IDL's HTML help system.
address@hidden idlwave-html-help-location @file{/usr/local/etc}
-The directory where the @file{idl_html_help} dir or @file{idl.chm}
-HTMLHelp files live.
address@hidden defopt
-
address@hidden idlwave-help-use-hh @code{nil}
-If set to @code{'hh} or @code{'keyhh}, use Windows native HTMLHelp
-with the specified help application.
address@hidden idlwave-html-system-help-location @file{help/online_help}
+Relative directory of the system-supplied HTML help directory,
+considered with respect to @code{idlwave-system-directory}. Relevant
+for IDL 6.2 and greater. Should not change.
address@hidden defopt
+
address@hidden idlwave-html-help-location @file{/usr/local/etc/}
+The directory where the @file{idl_html_help} HTML directory live.
+Obsolete and ignored for IDL 6.2 and greater
+(@code{idlwave-html-system-help-location} is used instead).
address@hidden defopt
+
address@hidden idlwave-help-use-assistant @code{t}
+If set, use the IDL Assistant if possible for online HTML help,
+otherwise use the browser function specified in
address@hidden
@end defopt
@defopt idlwave-help-browser-function
@@ -1408,8 +1458,8 @@
@defopt idlwave-help-browser-is-local
Is the browser selected in @code{idlwave-help-browser-function} run in a
-local Emacs buffer? Defaults to @code{t} if the function contains
-"-w3".
+local Emacs buffer or window? Defaults to @code{t} if the function
+contains "-w3".
@end defopt
@defopt idlwave-help-link-face
@@ -1517,16 +1567,15 @@
@kindex C-c C-i
IDLWAVE offers completion for class names, routine names, keywords,
system variables, system variable tags, class structure tags, regular
-structure tags and file names. As in many programming modes,
-completion is bound to @address@hidden (or @address@hidden in the
-IDLWAVE Shell --- @pxref{Using the Shell}). Completion uses exactly
-the same internal information as routine info, so when necessary
-(rarely) it can be updated with @kbd{C-c C-i}
-(@code{idlwave-update-routine-info}).
+structure tags and file names. As in many programming modes, completion
+is bound to @address@hidden (or simply @address@hidden in the IDLWAVE
+Shell --- @pxref{Using the Shell}). Completion uses exactly the same
+internal information as routine info, so when necessary (rarely) it can
+be updated with @kbd{C-c C-i} (@code{idlwave-update-routine-info}).
The completion function is context sensitive and figures out what to
-complete based location of the point. Here are example lines and what
address@hidden@key{TAB}} would try to complete when the cursor is on the
+complete based on the location of the point. Here are example lines and
+what @address@hidden would try to complete when the cursor is on the
position marked with a @samp{_}:
@example
@@ -1536,7 +1585,7 @@
plot,x,y,/x_ @r{Keyword of @code{plot} procedure}
plot,min(_ @r{Keyword of @code{min} function}
obj -> a_ @r{Object method (procedure)}
-a(2,3) = obj -> a_ @r{Object method (function)}
+a[2,3] = obj -> a_ @r{Object method (function)}
x = obj_new('IDL_ @r{Class name}
x = obj_new('MyCl',a_ @r{Keyword to @code{Init} method in class @code{MyCl}}
pro A_ @r{Class name}
@@ -1655,16 +1704,17 @@
@cindex Class ambiguity
@cindex @code{self} object, default class
An object method is not uniquely determined without the object's class.
-Since the class is almost always omitted in the calling source, IDLWAVE
-considers all available methods in all classes as possible method name
-completions. The combined list of keywords of the current method in
address@hidden known classes which contain that method will be considered
-for keyword completion. In the @file{*Completions*} buffer, the
-matching classes will be shown next to each item (see option
+Since the class is almost always omitted in the calling source (as
+required to obtain the true benefits of object-based programming),
+IDLWAVE considers all available methods in all classes as possible
+method name completions. The combined list of keywords of the current
+method in @emph{all} known classes which contain that method will be
+considered for keyword completion. In the @file{*Completions*} buffer,
+the matching classes will be shown next to each item (see option
@code{idlwave-completion-show-classes}). As a special case, the class
of an object called @samp{self} is always taken to be the class of the
-current routine. All classes it inherits from are considered as well
-where appropriate.
+current routine, when in an IDLWAVE buffer. All inherits classes are
+considered as well.
@cindex Forcing class query.
@cindex Class query, forcing
@@ -1674,7 +1724,7 @@
@code{idlwave-query-class} can be configured to make such prompting the
default for all methods (not recommended), or selectively for very
common methods for which the number of completing keywords would be too
-large (e.g. @code{Init}).
+large (e.g. @code{Init,SetProperty,GetProperty}).
@cindex Saving object class on @code{->}
@cindex @code{->}
@@ -1683,9 +1733,9 @@
editing session. Subsequent completions in the same statement
(e.g. keywords) can then reuse this class information. This works by
placing a text property on the method invocation operator @samp{->},
-after which the operator will be shown in a different face. This is not
-enabled by default --- the variable @code{idlwave-store-inquired-class}
-can be used to turn it on.
+after which the operator will be shown in a different face (bold by
+default). The variable @code{idlwave-store-inquired-class} can be used
+to turn it off or on.
@defopt idlwave-completion-show-classes (@code{1})
address@hidden means show up to that many classes in
@@ -1701,14 +1751,14 @@
Association list governing query for object classes during completion.
@end defopt
address@hidden idlwave-store-inquired-class (@code{nil})
address@hidden idlwave-store-inquired-class (@code{t})
address@hidden means store class of a method call as text property on
@samp{->}.
@end defopt
@defopt idlwave-class-arrow-face
-Face to highlight object operator arrows @samp{->} which carry a class
-text property.
+Face to highlight object operator arrows @samp{->} which carry a saved
+class text property.
@end defopt
@node Object Method Completion in the Shell, Class and Keyword Inheritance,
Object Method Completion and Class Ambiguity, Completion
@@ -1722,9 +1772,7 @@
determine the class of the object. If this query is successful, the
class found will be used to select appropriate completions, routine
info, or help. If unsuccessful, information from all known classes will
-be used (as in the buffer). Setting the variable
address@hidden can eliminate unnecessary repetitive
-queries for the object's class, and speed up completion.
+be used (as in the buffer).
@node Class and Keyword Inheritance, Structure Tag Completion, Object Method
Completion in the Shell, Completion
@subsection Class and Keyword Inheritance
@@ -1802,7 +1850,17 @@
@end lisp
Once enabled, you'll also be able to access online help on the structure
-tags, using the usual methods (@pxref{Online Help}).
+tags, using the usual methods (@pxref{Online Help}). In addition,
+structure variables in the shell will be queried for tag names, similar
+to the way object variables in the shell are queried for method names.
+So, e.g.:
+
address@hidden
+IDL> st.[Tab]
address@hidden example
+
address@hidden will complete with all structure fields of the structure
address@hidden
@node Routine Source, Resolving Routines, Completion, The IDLWAVE Major Mode
@section Routine Source
@@ -1817,9 +1875,10 @@
@code{idlwave-routine-info} would have used, taken from nearby buffer
contents. In the minibuffer, specify a complete routine name (including
any class part). IDLWAVE will display the source file in another
-window, positioned at the routine in question. You can also visit a
-routine in the current buffer, with completion, by using a single prefix
-(@kbd{C-u C-c C-v}).
+window, positioned at the routine in question. You can also limit this
+to a routine in the current buffer only, with completion, and a
+context-sensitive default, by using a single prefix (@kbd{C-u C-c C-v})
+or the convenience binding @kbd{C-c C-t}.
@cindex Buffers, killing
@cindex Killing autoloaded buffers
@@ -1838,7 +1897,8 @@
The key sequence @kbd{C-c =} calls the command @code{idlwave-resolve}
and sends the line @samp{RESOLVE_ROUTINE, '@var{routine_name}'} to IDL
in order to resolve (compile) it. The default routine to be resolved is
-taken from context, but you get a chance to edit it.
+taken from context, but you get a chance to edit it. Usually this is
+not necessary, since IDL automatically discovers routines on its path.
@code{idlwave-resolve} is one way to get a library module within reach
of IDLWAVE's routine info collecting functions. A better way is to
@@ -1983,6 +2043,8 @@
@tab @code{print,}
@item @code{\pt}
@tab @code{plot,}
address@hidden @code{\pv}
address@hidden @code{ptr_valid()}
@item @code{\re}
@tab @code{read,}
@item @code{\rf}
@@ -2144,14 +2206,16 @@
Some operators can be automatically surrounded by spaces. This can
happen when the operator is typed, or later when the line is indented.
-IDLWAVE can pad the operators @samp{&}, @samp{<}, @samp{>}, @samp{,},
address@hidden, and @samp{->}, but this feature is turned off by default. If
-you want to turn it on, customize the variables
address@hidden and @code{idlwave-do-actions}. You can
-also define similar actions for other operators by using the function
address@hidden in the mode hook. For example, to
-enforce space padding of the @samp{+} and @samp{*} operators, try this
-in @file{.emacs}
+IDLWAVE can pad the operators @samp{<}, @samp{>}, @samp{,}, @samp{=},
+and @samp{->}, as well as the modified assignment operators
+(@samp{AND=}, @samp{OR=}, etc.). This feature is turned off by default.
+If you want to turn it on, customize the variables
address@hidden and @code{idlwave-do-actions} and turn
+both on. You can also define similar actions for other operators by
+using the function @code{idlwave-action-and-binding} in the mode hook.
+For example, to enforce space padding of the @samp{+} and @samp{*}
+operators (outside of strings and comments, of course), try this in
address@hidden
@lisp
(add-hook 'idlwave-mode-hook
@@ -2161,14 +2225,26 @@
(idlwave-action-and-binding "+" '(idlwave-surround 1 1))))
@end lisp
+Note that the modified assignment operators which begin with a word
+(@samp{AND=}, @samp{OR=}, @samp{NOT=}, etc.) require a leading space to
+be recognized (e.g @code{vAND=4} would be intepreted as a variable
address@hidden). Also note that, since e.g., @code{>} and @code{>=} are
+both valid operators, it is impossible to surround both by blanks while
+they are being typed. Similarly with @code{&} and @code{&&}. For
+these, a compromise is made: the padding is placed on the left, and if
+the longer operator is keyed in, on the right as well (otherwise you
+must insert spaces to pad right yourself, or press simply press Tab to
+repad everything if @code{idlwave-do-actions} is on).
+
@defopt idlwave-surround-by-blank (@code{nil})
address@hidden means enable @code{idlwave-surround}. If address@hidden,
address@hidden, @samp{<}, @samp{>}, @samp{&}, @samp{,}, @samp{->} are
address@hidden, @samp{<}, @samp{>}, @samp{&}, @samp{,}, @samp{->}, and the
+modified assignment operators (@samp{AND=}, @samp{OR=}, etc.) are
surrounded with spaces by @code{idlwave-surround}.
@end defopt
@defopt idlwave-pad-keyword (@code{t})
address@hidden means pad @samp{=} for keywords like assignments.
address@hidden means space-pad the @samp{=} in keyword assignments.
@end defopt
@node Case Changes, , Padding Operators, Actions
@@ -2328,9 +2404,14 @@
Normal hook. Executed when @file{idlwave.el} is loaded.
@end defopt
address@hidden PARTOFEMACS
address@hidden The IDLWAVE Shell, Acknowledgements, The IDLWAVE Major Mode, Top
address@hidden ifset
address@hidden PARTOFEMACS
address@hidden The IDLWAVE Shell, Installation, The IDLWAVE Major Mode, Top
address@hidden ifclear
address@hidden The IDLWAVE Shell, Acknowledgements, The IDLWAVE Major Mode, Top
@chapter The IDLWAVE Shell
@cindex IDLWAVE shell
@cindex Major mode, @code{idlwave-shell-mode}
@@ -2346,11 +2427,9 @@
interactively, to compile and run IDL programs in Emacs buffers and to
debug these programs. The IDLWAVE shell is built on @file{comint}, an
Emacs packages which handles the communication with the IDL program.
-Unfortunately IDL for Windows does not have command-prompt versions
-and thus do not allow the interaction with address@hidden
-inform the maintainer if you come up with a way to make the IDLWAVE
-shell work on these systems.} --- so the IDLWAVE shell currently only
-works under Unix and MacOSX.
+Unfortunately, IDL for Windows does not have command-prompt versions and
+thus do not allow the interaction with Emacs --- so the IDLWAVE shell
+currently only works under Unix and MacOSX.
@menu
* Starting the Shell:: How to launch IDL as a subprocess
@@ -2448,6 +2527,11 @@
shell buffer.
@end defopt
address@hidden idlwave-shell-use-dedicated-window (@code{nil})
address@hidden means use a dedicated window for the shell, taking care
+not it replace it with other buffers.
address@hidden defopt
+
@defopt idlwave-shell-frame-parameters
The frame parameters for a dedicated idlwave-shell frame.
@end defopt
@@ -2539,6 +2623,9 @@
(@code{idlwave-update-routine-info})
@item @kbd{C-c C-v}
@tab Find the source file of a routine (@code{idlwave-find-module})
address@hidden @kbd{C-c C-t}
address@hidden Find the source file of a routine in the currently visited file
+(@code{idlwave-find-module-this-file}).
@item @kbd{C-c =}
@tab Compile a library routine (@code{idlwave-resolve})
@end multitable
@@ -2760,16 +2847,20 @@
and re-enabled: @kbd{C-c C-d C-\}
(@code{idlwave-shell-toggle-enable-current-bp}).
-
-Breakpoint lines are highlighted or indicated with an icon in the
-source code (different icons for conditional, after, and other break
-types). Disabled breakpoints are @emph{grayed out} by default. Note
-that IDL places breakpoints as close as possible on or after the line
-you specify. IDLWAVE queries the shell for the actual breakpoint
-location which was set, so the exact line you specify may not be
-marked. You can re-sync the breakpoint list and display at any time
-(e.g., if you add or remove some on the command line) using @kbd{C-c
-C-d C-l}.
+Breakpoint lines are highlighted or indicated with an icon in the source
+code (different icons for conditional, after, and other break types).
+Disabled breakpoints are @emph{grayed out} by default. Note that IDL
+places breakpoints as close as possible on or after the line you
+specify. IDLWAVE queries the shell for the actual breakpoint location
+which was set, so the exact line you specify may not be marked. You can
+re-sync the breakpoint list and update the display at any time (e.g., if
+you add or remove some on the command line) using @kbd{C-c C-d C-l}.
+
+In recent IDLWAVE versions, the breakpoint line is highlighted when the
+mouse is moved over it, and a tooltip pops up describing the break
+details. @kbd{Mouse-3} on the breakpoint line pops up a menu of
+breakpoint actions, including clearing, disabling, and adding or
+changing break conditions or ``after'' break count.
Once the program has stopped somewhere, you can step through it. The
most important stepping commands are @kbd{C-c C-d C-s} to execute one
@@ -2785,7 +2876,7 @@
@item @kbd{C-c C-d C-b}
@tab Set breakpoint (@code{idlwave-shell-break-here})
@item @kbd{C-c C-d C-i}
address@hidden Set breakpoint in function named here
(@code{idlwave-shell-break-in})
address@hidden Set breakpoint in module named here
(@code{idlwave-shell-break-in})
@item @kbd{C-c C-d C-d}
@tab Clear current breakpoint (@code{idlwave-shell-clear-current-bp})
@item @kbd{C-c C-d C-a}
@@ -2821,7 +2912,14 @@
@end multitable
All of these commands have equivalents in Electric Debug Mode, which
-provides faster access (@pxref{Electric Debug Mode}).
+provides faster single-key access (@pxref{Electric Debug Mode}).
+
+The line where IDL is currently stopped, at breakpoints, halts, and
+errors, etc., is marked with a color overlay or arrow, depending on the
+setting in @code{idlwave-shell-mark-stop-line}. If an overlay face is
+used to mark the stop line (as it is by default), when stepping through
+code, the face color is temporarily changed to gray, until IDL completes
+the next command and moves to the new line.
@defopt idlwave-shell-mark-breakpoints (@code{t})
address@hidden means mark breakpoints in the source file buffers. The
@@ -2834,6 +2932,28 @@
@code{idlwave-shell-mark-breakpoints} has the value @code{face}.
@end defopt
address@hidden idlwave-shell-breakpoint-popup-menu (@code{t})
+Whether to pop-up a menu and present a tooltip description on
+breakpoint lines.
address@hidden defopt
+
address@hidden idlwave-shell-mark-stop-line (@code{t})
address@hidden means mark the source code line where IDL is currently
+stopped. The value specifies the preferred method. Valid values are
address@hidden, @code{t}, @code{arrow}, and @code{face}.
address@hidden defopt
+
address@hidden idlwave-shell-overlay-arrow (@code{">"})
+The overlay arrow to display at source lines where execution halts, if
+configured in @code{idlwave-shell-mark-stop-line}.
address@hidden defopt
+
address@hidden idlwave-shell-stop-line-face
+The face which highlights the source line where IDL is stopped, if
+configured in @code{idlwave-shell-mark-stop-line}.
address@hidden defopt
+
+
@node Compiling Programs, Walking the Calling Stack, Breakpoints and Stepping,
Debugging IDL Programs
@subsection Compiling Programs
@cindex Compiling programs
@@ -2860,22 +2980,6 @@
been set (or you give two prefix arguments), the last command on the
@code{comint} input history is sent.
address@hidden idlwave-shell-mark-stop-line (@code{t})
address@hidden means mark the source code line where IDL is currently
-stopped. The value specifies the preferred method. Valid values are
address@hidden, @code{t}, @code{arrow}, and @code{face}.
address@hidden defopt
-
address@hidden idlwave-shell-overlay-arrow (@code{">"})
-The overlay arrow to display at source lines where execution halts, if
-configured in @code{idlwave-shell-mark-stop-line}.
address@hidden defopt
-
address@hidden idlwave-shell-stop-line-face
-The face which highlights the source line where IDL is stopped, if
-configured in @code{idlwave-shell-mark-stop-line}.
address@hidden defopt
-
@node Walking the Calling Stack, Electric Debug Mode, Compiling Programs,
Debugging IDL Programs
@subsection Walking the Calling Stack
@cindex Calling stack, walking
@@ -2895,26 +2999,27 @@
for information how to examine the value of variables and expressions on
higher calling stack levels.
address@hidden
address@hidden
<A NAME="EDEBUG"></A>
address@hidden ifhtml
address@hidden html
@node Electric Debug Mode, , Walking the Calling Stack, Debugging IDL Programs
@subsection Electric Debug Mode
@cindex Electric Debug Mode
@cindex @samp{*Debugging*}
Even with a convenient debug key prefix enabled, repetitive stepping,
-variable examination (@pxref{Examining Variables}), and other
-debugging activities can be awkward and slow using commands which
-require multiple keystrokes. Luckily, there's a better way, inspired
-by the lisp e-debug mode, and available through the @emph{Electric
-Debug Mode}. By default, as soon as a breakpoint is hit, this minor
-mode is enabled. The buffer showing the line where execution has
-halted is switched to Electric Debug Mode. This mode is visible as
address@hidden in the mode line, and a different face (violet by
-default, where color is available) for the line stopped at point. The
-buffer is made read-only and single-character bindings for the most
-commonly used debugging commands are enabled:
+variable examination (@pxref{Examining Variables}), and other debugging
+activities can be awkward and slow using commands which require multiple
+keystrokes. Luckily, there's a better way, inspired by the lisp e-debug
+mode, and available through the @emph{Electric Debug Mode}. By default,
+as soon as a breakpoint is hit, this minor mode is enabled. The buffer
+showing the line where execution has halted is switched to Electric
+Debug Mode. This mode is visible as @samp{*Debugging*} in the mode
+line, and a different face (violet by default, if color is available)
+for the line stopped at point. The buffer is made read-only and
+single-character bindings for the most commonly used debugging commands
+are enabled. These character commands (a list of which is available
+with @kbd{C-?}) are:
@multitable @columnfractions .2 .8
@item @kbd{a}
@@ -2923,10 +3028,12 @@
@tab Set breakpoint, @kbd{C-u b} for a conditional break, @kbd{C-n b} for nth
hit (@code{idlwave-shell-break-here})
@item @kbd{d}
@tab Clear current breakpoint (@code{idlwave-shell-clear-current-bp})
address@hidden @kbd{e}
address@hidden Prompt for expression to print
(@code{idlwave-shell-clear-current-bp}).
@item @kbd{h}
@tab Continue to the line at cursor position (@code{idlwave-shell-to-here})
@item @kbd{i}
address@hidden Set breakpoint in function named here
(@code{idlwave-shell-break-in})
address@hidden Set breakpoint in module named here
(@code{idlwave-shell-break-in})
@item @kbd{[}
@tab Go to the previous breakpoint in the file
(@code{idlwave-shell-goto-previous-bp})
@item @kbd{]}
@@ -2978,7 +3085,7 @@
Most single-character electric debug bindings use the final keystroke
of the equivalent multiple key commands (which are of course also
-still available), but some differ (e.g. @kbd{t},@kbd{q},@kbd{x}).
+still available), but some differ (e.g. @kbd{e},@kbd{t},@kbd{q},@kbd{x}).
Some have additional convenience bindings (like @address@hidden for
stepping). All prefix and other argument options described in this
section for the commands invoked by electric debug bindings are still
@@ -3014,15 +3121,24 @@
halts.
@end defopt
address@hidden idlwave-shell-electric-stop-color (Violet)
+Default color of the stopped line overlay when in electric debug mode.
address@hidden defopt
+
address@hidden idlwave-shell-electric-stop-line-face
+The face to use for the stopped line. Defaults to a face similar to the
+modeline, with color @code{idlwave-shell-electric-stop-color}.
address@hidden defopt
+
@defopt idlwave-shell-electric-zap-to-file (@code{t})
If set, when entering electric debug mode, select the window displaying
the file where point is stopped. This takes point away from the shell
window, but is useful for immediate stepping, etc.
@end defopt
address@hidden
address@hidden
<A NAME="EXAMINE"></A>
address@hidden ifhtml
address@hidden html
@node Examining Variables, Custom Expression Examination, Debugging IDL
Programs, The IDLWAVE Shell
@section Examining Variables
@cindex @code{PRINT} expressions
@@ -3033,15 +3149,15 @@
@cindex Mouse binding to print expressions
@kindex C-c C-d C-p
-Do you find yourself repeatedly typing,
-e.g. @code{print,n_elements(x)}, and similar statements to remind
-yourself of the type/size/structure/value/etc. of variables and
-expressions in your code or at the command line? IDLWAVE has a suite
-of special commands to automate these types of variable or expression
-examinations. They work by sending statements to the shell formatted
-to include the indicated expression.
+Do you find yourself repeatedly typing, e.g. @code{print,n_elements(x)},
+and similar statements to remind yourself of the
+type/size/structure/value/etc. of variables and expressions in your code
+or at the command line? IDLWAVE has a suite of special commands to
+automate these types of variable or expression examinations. They work
+by sending statements to the shell formatted to include the indicated
+expression, and can be accessed in several ways.
-These examination commands can be used in the shell or buffer at any
+These @emph{examine} commands can be used in the shell or buffer at any
time (as long as the shell is running), and are very useful when
execution is stopped in a buffer due to a triggered breakpoint or error,
or while composing a long command in the IDLWAVE shell. In the latter
@@ -3055,19 +3171,23 @@
If the variable @code{idlwave-shell-separate-examine-output} is
address@hidden (the default), all examine output will be sent to a
special @file{*Examine*} buffer, rather than the shell. The output of
-prior examine commands is saved. In this buffer @key{c} clears the
-contents, and @key{q} hides the buffer.
+prior examine commands is saved in this buffer. In this buffer @key{c}
+clears the contents, and @key{q} hides the buffer.
The two most basic examine commands are bound to @kbd{C-c C-d C-p}, to
print the expression at point, and @kbd{C-c C-d ?}, to invoke help on
this address@hidden as @kbd{p} and @kbd{?} in Electric
Debug Mode (@pxref{Electric Debug Mode})}. The expression at point is
-either an array expression or a function call, or the contents of a
-pair of parentheses. The selected expression is highlighted, and
-simultaneously the resulting output is highlighted in the shell.
-Calling the above commands with a prefix argument will use the current
-region as expression instead of using the one at point. Two prefix
-arguments (@kbd{C-u C-u C-c C-d C-p}) will prompt for an expression.
+either an array expression or a function call, or the contents of a pair
+of parentheses. The chosen expression is highlighted, and
+simultaneously the resulting output is highlighted in the shell or
+separate output buffer. Calling the above commands with a prefix
+argument will use the current region as expression instead of using the
+one at point. which can be useful for examining complicated, multi-line
+expressions. Two prefix arguments (@kbd{C-u C-u C-c C-d C-p}) will
+prompt for an expression to print directly. By default, when invoking
+print, only an initial portion of long arrays will be printed, up to
address@hidden
For added speed and convenience, there are mouse bindings which allow
you to click on expressions and examine their values. Use
@@ -3121,6 +3241,11 @@
@file{*Examine*} buffer, instead of in the shell itself.
@end defopt
address@hidden idlwave-shell-max-print-length (200)
+The maximum number of leading array entries to print, when examining
+array expressions.
address@hidden defopt
+
@node Custom Expression Examination, , Examining Variables, The IDLWAVE Shell
@section Custom Expression Examination
@cindex Expressions, custom examination
@@ -3192,7 +3317,68 @@
@end defopt
address@hidden PARTOFEMACS
address@hidden Installation, Acknowledgements, The IDLWAVE Shell, Top
address@hidden Installation
address@hidden Installation
+
address@hidden
+* Installing IDLWAVE:: How to install the distribution
+* Installing Online Help:: Where to get the additional files needed
address@hidden menu
+
address@hidden Installing IDLWAVE, Installing Online Help, Installation,
Installation
address@hidden Installing IDLWAVE
+
address@hidden FTP site
address@hidden URL, homepage for IDLWAVE
address@hidden Homepage for IDLWAVE
address@hidden IDLWAVE, homepage
address@hidden XEmacs package IDLWAVE
address@hidden Emacs, distributed with IDLWAVE
+IDLWAVE is part of Emacs 21.1 and later. It is also an XEmacs package
+and can be installed from
address@hidden://ftp.xemacs.org/pub/xemacs/packages/,the XEmacs ftp site}
+with the normal package management system on XEmacs 21. You can also
+download IDLWAVE and install it yourself from
address@hidden@value{IDLWAVEHOMEPAGE}, the maintainers webpage}. Follow the
+instructions in the INSTALL file.
+
address@hidden Installing Online Help, , Installing IDLWAVE, Installation
address@hidden Installing Online Help
address@hidden Installing online help
address@hidden Online Help, Installation
+
+Starting with IDL v6.2, all necessary online help files and routine
+information are distributed directly with IDL. Nothing additional is
+required.
+
+For version of IDL prior to 6.2 (and IDLWAVE prior to version 6.0), if
+you want to use the online help display, an additional set of files
+(HTML versions of the IDL documentation) must be installed. These files
+can also be downloaded from @address@hidden, the
+maintainers webpage}. You need to place the files somewhere on your
+system and tell IDLWAVE where they are with:
+
address@hidden
+; e.g. /usr/local/etc/
+(setq idlwave-html-help-location "/path/to/help/dir/")
address@hidden lisp
+
address@hidden The default location is @file{/usr/local/etc}, and if you
+install the directory there, you do not need to set this variable. Note
+that the help package only changes with new versions of the IDL
+documentation, and need not be updated unless your version of IDL
+changes. Since the help system is distributed with IDL starting at
+version 6.2, no new help packages will be created for these versions.
+
address@hidden Acknowledgements, Sources of Routine Info, Installation, Top
address@hidden ifclear
+
address@hidden PARTOFEMACS
@node Acknowledgements, Sources of Routine Info, The IDLWAVE Shell, Top
address@hidden ifset
+
@chapter Acknowledgements
@cindex Acknowledgements
@cindex Maintainer, of IDLWAVE
@@ -3219,8 +3405,8 @@
@item
@uref{mailto:jdsmith@@as.arizona.edu, @b{J.D. Smith}}, the current
maintainer, as of version 4.10, helped shape object method completion
-and most new features introduced in versions 4.x, and added
-significant new capabilities for versions 5.x.
+and most new features introduced in versions 4.x, and introduced many
+new features for IDLWAVE versions 5.x and 6.x.
@end itemize
@noindent
@@ -3264,6 +3450,10 @@
Paul Sorenson <aardvark62__at__msn.com>
@end itemize
+Doug Dirks was instrumental in providing the crucial IDL XML catalog to
+support HTML help with IDL v6.2 and later, and Ali Bahrami provided
+scripts and documentation to interface with the IDL Assistant.
+
@noindent
Thanks to everyone!
@@ -3298,24 +3488,26 @@
@enumerate
@item
address@hidden routines} are defined inside IDL itself. The source
-code of such routines is not available.
address@hidden routines} are defined inside IDL itself. The source code
+of such routines is not available, but instead are learned about through
+the IDL documentation.
@item
Routines which are @emph{part of the current program}, are defined in a
file explicitly compiled by the user. This file may or may not be
located on the IDL search path.
@item
@emph{Library routines} are defined in files located on IDL's search
-path, and will not need to be manually compiled. When a library routine
-is called for the first time, IDL will find the source file and compile
-it dynamically. A special sub-category of library routines are the
address@hidden routines} distributed with IDL, and usually available in
-the @file{lib} subdirectory of the IDL distribution.
+path. When a library routine is called for the first time, IDL will
+find the source file and compile it dynamically. A special sub-category
+of library routines are the @emph{system routines} distributed with IDL,
+and usually available in the @file{lib} subdirectory of the IDL
+distribution.
@item
External routines written in other languages (like Fortran or C) can be
called with @code{CALL_EXTERNAL}, linked into IDL via @code{LINKIMAGE},
or included as dynamically loaded modules (DLMs). Currently IDLWAVE
-cannot provide routine info and completion for such external routines.
+cannot provide routine info and completion for such external routines,
+except by querying the Shell for calling information (DLMs only).
@end enumerate
@node Routine Information Sources, Catalogs, Routine Definitions, Sources of
Routine Info
@@ -3335,15 +3527,15 @@
@item
It has a @emph{builtin list} with information about the routines IDL
ships with. IDLWAVE @value{VERSION} is distributed with a list of
address@hidden routines and @value{NSYSKEYWORDS} keywords,
-reflecting IDL version @value{IDLVERSION}. This list has been created
-by scanning the IDL manuals and is stored in the file
address@hidden @xref{Documentation Scan}, for information on
-how to regenerate this file for new versions of IDL.
address@hidden routines, reflecting IDL version
address@hidden As of IDL v6.2, the routine info is distributed
+directly with IDL in the form of an XML catalog which IDLWAVE scans.
+Formerly, this list was created by scanning the IDL manuals to produce
+the file @file{idlw-rinfo.el}.
@item
-It @emph{scans} all @emph{buffers} of the current Emacs session for
-routine definitions. This is done automatically when routine
+IDLWAVE @emph{scans} all its @emph{buffers} in the current Emacs session
+for routine definitions. This is done automatically when routine
information or completion is first requested by the user. Each new
buffer and each buffer saved after making changes is also scanned. The
command @kbd{C-c C-i} (@code{idlwave-update-routine-info}) can be used
@@ -3353,16 +3545,18 @@
If you have an IDLWAVE-Shell running in the Emacs session, IDLWAVE will
@emph{query the shell} for compiled routines and their arguments. This
happens automatically when routine information or completion is first
-requested by the user, and each time an Emacs buffer is compiled with
address@hidden C-d C-c}. Though rarely necessary, the command @kbd{C-c C-i}
-(@code{idlwave-update-routine-info}) can be used to update the shell
-routine data.
+requested by the user. Each time an Emacs buffer is compiled with
address@hidden C-d C-c}, the routine info for that file is queried. Though
+rarely necessary, the command @kbd{C-c C-i}
+(@code{idlwave-update-routine-info}) can be used to explicitly update
+the shell routine data.
@item
-Many popular libraries are distributed with routine information
-already scanned into @emph{library catalogs} (@pxref{Library
-Catalogs}). These per-directory catalog files can also be built by
-the user with the supplied @file{idlwave_catalog} tool.
+Many popular libraries are distributed with routine information already
+scanned into @emph{library catalogs} (@pxref{Library Catalogs}). These
+per-directory catalog files can also be built by the user with the
+supplied @file{idlwave_catalog} tool. They are automatically discovered
+by IDLWAVE.
@item
IDLWAVE can scan selected directories of source files and store the
@@ -3371,9 +3565,10 @@
Catalog}, for information on how to scan files in this way.
@end enumerate
-Loading routine and catalog information can be a time consuming process,
-especially over slow networks. Depending on the system and network
-configuration it could take up to 30 seconds. In order to minimize the
+Loading all the routine and catalog information can be a time consuming
+process, especially over slow networks. Depending on the system and
+network configuration it could take up to 30 seconds (though locally on
+fast systems is usually only a few seconds). In order to minimize the
wait time upon your first completion or routine info command in a
session, IDLWAVE uses Emacs idle time to do the initialization in six
steps, yielding to user input in between. If this gets into your way,
@@ -3399,9 +3594,9 @@
Controls under what circumstances routine info is updated automatically.
@end defopt
address@hidden
address@hidden
<A NAME="CATALOGS"></A>
address@hidden ifhtml
address@hidden html
@node Catalogs, Load-Path Shadows, Routine Information Sources, Sources of
Routine Info
@appendixsec Catalogs
@cindex Catalogs
@@ -3426,7 +3621,12 @@
information (e.g. Windows), a library path must be specified in
@code{idlwave-library-path} to allow library catalogs to be located, and
to setup directories for user catalog scan (@pxref{User Catalog} for
-more on this variable).
+more on this variable). Note that, before the shell is running, IDLWAVE
+can only know about the IDL search path by consulting the file pointed
+to by @code{idlwave-path-file} (@file{~/.idlwave/idlpath.el}, by
+default). If @code{idlwave-auto-write-path} is enabled (which is the
+default), the paths are written out whenever the IDLWAVE shell is
+started.
@defopt idlwave-auto-write-path (@code{t})
Write out information on the !PATH and !DIR paths from IDL automatically
@@ -3435,17 +3635,20 @@
@end defopt
@defopt idlwave-library-path
-IDL library path for Windows and MacOS. Not needed under Unix/MacOSX.
+IDL library path for Windows and MacOS. Under Unix/MacOSX, will be
+obtained from the Shell when run.
@end defopt
@defopt idlwave-system-directory
-The IDL system directory for Windows and MacOS. Not needed under
-Unix/MacOSX (obtained from the Shell).
+The IDL system directory for Windows and MacOS. Also needed for
+locating HTML help and the IDL Assistant for IDL v6.2 and later. Under
+Unix/MacOSX, will be obtained from the Shell and recorded, if run.
@end defopt
@defopt idlwave-config-directory (@file{~/.idlwave})
-Default path where IDLWAVE saves configuration information and any
-user catalog.
+Default path where IDLWAVE saves configuration information, a user
+catalog (if any), and a cached scan of the XML catalog (IDL v6.2 and
+later).
@end defopt
@menu
@@ -3453,23 +3656,23 @@
* User Catalog::
@end menu
address@hidden
address@hidden
<A NAME="LIBRARY_CATALOGS"></A>
address@hidden ifhtml
address@hidden html
@node Library Catalogs, User Catalog, Catalogs, Catalogs
@appendixsubsec Library Catalogs
@cindex @file{.idlwave_catalog}
@cindex Library catalogs
@cindex @code{idlwave_catalog}
-Library catalogs are files named @file{.idlwave_catalog} stored in
-directories containing @code{.pro} routine files. They are discovered
-on the IDL search path and loaded automatically when routine information
-is read. Each catalog file documents the routines found in that
-directory --- one catalog per directory. Every catalog has a library
-name associated with it (e.g. @emph{AstroLib}). This name will be shown
-briefly when the catalog is found, and in the routine info of routines
-it documents.
+Library catalogs consist of files named @file{.idlwave_catalog} stored
+in directories containing @code{.pro} routine files. They are
+discovered on the IDL search path and loaded automatically when routine
+information is read. Each catalog file documents the routines found in
+that directory --- one catalog per directory. Every catalog has a
+library name associated with it (e.g. @emph{AstroLib}). This name will
+be shown briefly when the catalog is found, and in the routine info of
+routines it documents.
Many popular libraries of routines are shipped with IDLWAVE catalog
files by default, and so will be automatically discovered. Library
@@ -3482,7 +3685,8 @@
re-scanned automatically to gather updates, e.g. in a @file{cron} job.
Scanning is much faster than with the built-in user catalog method. One
minor disadvantage: the entire IDL search path is scanned for catalog
-files every time IDLWAVE starts up, which might be slow over a network.
+files every time IDLWAVE starts up, which might be slow if accessing IDL
+routines over a slow network.
A Perl tool to create library catalogs is distributed with IDLWAVE:
@code{idlwave_catalog}. It can be called quite simply:
@@ -3490,9 +3694,10 @@
idlwave_catalog MyLib
@end example
address@hidden This would scan all directories recursively beneath the current
and
address@hidden This will scan all directories recursively beneath the current
and
populate them with @file{.idlwave_catalog} files, tagging the routines
-found with the name library ``MyLib''. The full usage information:
+found there with the name library ``MyLib''. The full usage
+information:
@example
Usage: idlwave_catalog [-l] [-v] [-d] [-s] [-f] [-h] libname
@@ -3514,8 +3719,8 @@
@kbd{C-u C-c C-i}.
@defopt idlwave-use-library-catalogs (@code{t})
-Whether to search for and load library catalogs. Only disable if
-performance is a problem and the catalogs are not needed.
+Whether to search for and load library catalogs. Disable if load
+performance is a problem and/or the catalogs are not needed.
@end defopt
@node User Catalog, , Library Catalogs, Catalogs
@@ -3560,11 +3765,11 @@
(setq idlwave-system-directory "c:/RSI/IDL56/")
@end lisp
address@hidden Under GNU and UNIX, these values will be automatically gathered
from
-the IDLWAVE shell.
address@hidden Under GNU/Linux and UNIX, these values will be automatically
+gathered from the IDLWAVE shell, if run.
The command @kbd{M-x idlwave-create-user-catalog-file} (or the menu item
address@hidden>Routine Info->Select Catalog Directories} can then be
address@hidden>Routine Info->Select Catalog Directories}) can then be
used to create a user catalog. It brings up a widget in which you can
select some or all directories on the search path. Directories which
already contain a library catalog are marked with @samp{[LIB]}, and need
@@ -3642,7 +3847,7 @@
@cindex MacOS
@cindex IDL variable @code{!DIR}
@cindex @code{!DIR}, IDL variable
-Users of Windows and MacOS also must set the variable
+Users of Windows and MacOS (not X) also must set the variable
@code{idlwave-system-directory} to the value of the @code{!DIR} system
variable in IDL. IDLWAVE appends @file{lib} to the value of this
variable and assumes that all files found on that path are system
@@ -3658,21 +3863,36 @@
@cindex Scanning the documentation
@cindex Perl program, to create @file{idlw-rinfo.el}
address@hidden with version 6.2, IDL is distributed directly with HTML
+online help, and an XML-based catalog of routine information}. This
+makes scanning the manuals with the tool @file{get_html_rinfo}, and the
address@hidden file it produced, as described here, entirely
+unnecessary. The information is left here for users wishing to produce
+a catalog of older IDL versions' help.
+
+
IDLWAVE derives its knowledge about system routines from the IDL
manuals. The file @file{idlw-rinfo.el} contains the routine information
for the IDL system routines, and links to relevant sections of the HTML
documentation. The Online Help feature of IDLWAVE requires HTML
-versions of the IDL manuals to be available.
+versions of the IDL manuals to be available; the HTML documentation is
+not distributed with IDLWAVE by default, but must be downloaded
address@hidden
address@hidden PARTOFEMACS
+@ from @address@hidden, the maintainers
address@hidden
address@hidden ifclear
+.
The HTML files and related images can be produced from the
@file{idl.chm} HTMLHelp file distributed with IDL using the free
Microsoft HTML Help Workshop. If you are lucky, the maintainer of
-IDLWAVE will always have access to the newest version of IDL and
-provide updates. The IDLWAVE distribution also contains the Perl
-program @file{get_html_rinfo} which constructs the
address@hidden file by scanning the HTML documents produced from
-the IDL documentation. Instructions on how to use
address@hidden are in the program itself.
+IDLWAVE will always have access to the newest version of IDL and provide
+updates. The IDLWAVE distribution also contains the Perl program
address@hidden which constructs the @file{idlw-rinfo.el} file by
+scanning the HTML documents produced from the IDL documentation.
+Instructions on how to use @file{get_html_rinfo} are in the program
+itself.
@node HTML Help Browser Tips, Configuration Examples, Sources of Routine Info,
Top
@appendix HTML Help Browser Tips
@@ -3680,39 +3900,41 @@
There are a wide variety of possible browsers to use for displaying
the online HTML help available with IDLWAVE (starting with version
-5.0). Since IDLWAVE runs on a many different system types, a single
-browser configuration is not possible, but choices abound.
-
-Unfortunately, the HTML manuals decompiled from the original
-source contain formatting structures which Netscape 4.x does not
-handle well, though they are still readable. A much better choice is
-Mozilla, or one of the Mozilla-derived browsers such as
+5.0). Since IDL v6.2, a single cross-platform HTML help browser, the
address@hidden Assistant} is distributed with IDL. If this help browser is
+available, it is the preferred choice, and the default. The variable
address@hidden, enabled by default, controls
+whether this help browser is used. If you use the IDL Assistant, the
+tips here are not relevant.
+
+Since IDLWAVE runs on a many different system types, a single browser
+configuration is not possible, but choices abound. On many systems,
+the default browser configured in @code{browse-url-browser-function},
+and hence inherited by default by
address@hidden, is Netscape. Unfortunately, the
+HTML manuals decompiled from the original source contain formatting
+structures which Netscape 4.x does not handle well, though they are
+still readable. A much better choice is Mozilla, or one of the
+Mozilla-derived browsers such as
@uref{http://galeon.sourceforge.net/,Galeon} (GNU/Linux),
@uref{http://www.mozilla.org/projects/camino/,Camino} (MacOSX), or
@uref{http://www.mozilla.org/projects/firebird/,Firebird} (all
platforms). Newer versions of Emacs provide a browser-function choice
@code{browse-url-gnome-moz} which uses the Gnome-configured browser.
-Note that the HTML files decompiled from Microsoft Help sources
-contain specific references to the @samp{Symbol} font, which by default
-is not permitted in normal encodings (it's invalid, technically). Though
-it only impacts a few symbols, you can trick Mozilla-based browsers into
+Note that the HTML files decompiled from the help sources contain
+specific references to the @samp{Symbol} font, which by default is not
+permitted in normal encodings (it's invalid, technically). Though it
+only impacts a few symbols, you can trick Mozilla-based browsers into
recognizing @samp{Symbol} by following the directions
address@hidden://hutchinson.belmont.ma.us/tth/Xfonts.html, here}. With this
-fix in place, HTML help pages look almost identical to their PDF
-equivalents (yet can be bookmarked, browsed as history, searched, etc.).
address@hidden://hutchinson.belmont.ma.us/tth/Xfonts.html, here}. With
+this fix in place, HTML help pages look almost identical to their PDF
+equivalents (yet can be bookmarked, browsed as history, searched,
+etc.).
@noindent Individual platform recommendations:
@itemize @bullet
address@hidden Windows: The native Microsoft HTMLHelp browser is preferred,
-with even better results using the free
address@hidden://www.keyworks.net/keyhh.htm,@code{KEYHH}} program to
-permit IDL help to be targetted to a single window. To use HTMLHelp,
-specify @code{idlwave-help-use-hh} as @code{'hh} or @code{'keyhh}.
-One bonus: since IDL is shipped with the @file{idl.chm} help file, you
-don't need to download the HTML help package. @xref{Help with HTML
-Documentation}.
@item Unix/MacOSX: The @uref{http://www.w3m.org,@code{w3m}} browser
and its associated
@uref{http://emacs-w3m.namazu.org/,@code{emacs-w3m}} emacs mode
@@ -3907,9 +4129,9 @@
"help,___,/STRUCTURE"))))
@end example
address@hidden
address@hidden
<A NAME="WIN_MAC"></A>
address@hidden ifhtml
address@hidden html
@node Windows and MacOS, Troubleshooting, Configuration Examples, Top
@appendix Windows and MacOS
@cindex Windows
@@ -3920,40 +4142,34 @@
portability of Emacs, much of IDLWAVE does also work under different
operating systems like Windows (with NTEmacs or NTXEmacs) or MacOS.
-The only real problem is that there is no command-line
-version of IDL for Windows or MacOS(<=9) with which IDLWAVE can
-interact. As a result, the IDLWAVE Shell
-does not work and you have to rely on IDLDE to run and debug your
-programs. However, editing IDL source files with Emacs/IDLWAVE works
-with all bells and whistles, including routine info, completion and fast
-online help. Only a small amount of additional information must be
-specified in your @file{.emacs} file: the path names which, on a UNIX
-system, are automatically gathered by talking to the IDL program.
+The only real problem is that there is no command-line version of IDL
+for Windows or MacOS(<=9) with which IDLWAVE can interact. As a
+result, the IDLWAVE Shell does not work and you have to rely on IDLDE
+to run and debug your programs. However, editing IDL source files
+with Emacs/IDLWAVE works with all bells and whistles, including
+routine info, completion and fast online help. Only a small amount of
+additional information must be specified in your @file{.emacs} file:
+the path names which, on a UNIX system, are automatically gathered by
+talking to the IDL program.
Here is an example of the additional configuration needed for a Windows
system. I am assuming that IDLWAVE has been installed in
@address@hidden:\Program Files\IDLWAVE}} and that IDL is installed in
address@hidden@samp{C:\RSI\IDL55}}.
address@hidden@samp{C:\RSI\IDL62}}.
@lisp
-;; location of the lisp files (needed if IDLWAVE is not part of
-;; the X/Emacs installation)
+;; location of the lisp files (only needed if IDLWAVE is not part of
+;; your default X/Emacs installation)
(setq load-path (cons "c:/program files/IDLWAVE" load-path))
-;; The location of the IDL library files, both standard and your own.
+;; The location of the IDL library directories, both standard, and your own.
;; note that the initial "+" expands the path recursively
(setq idlwave-library-path
- '("+c:/RSI/IDL55/lib/" "+c:/user/me/idllibs" ))
+ '("+c:/RSI/IDL55/lib/" "+c:/path/to/my/idllibs" ))
;; location of the IDL system directory (try "print,!DIR")
-(setq idlwave-system-directory "c:/RSI/IDL55/")
-
-;; specify using the HTMLHelp documentation for online help, with the
-;; KEYHH helper routine (Windows only)
-(setq idlwave-use-hh 'keyhh)
+(setq idlwave-system-directory "c:/RSI/IDL62/")
-;; file in which to store the user catalog info
-(setq idlwave-user-catalog-file "c:/IDLWAVE/idlcat.el")
@end lisp
@noindent Furthermore, Windows sometimes tries to outsmart you --- make
@@ -3971,9 +4187,9 @@
help can skip the browser and use the HTMLHelp functionality directly.
@xref{Help with HTML Documentation}.
address@hidden
address@hidden
<A NAME="TROUBLE"></A>
address@hidden ifhtml
address@hidden html
@node Troubleshooting, Index, Windows and MacOS, Top
@appendix Troubleshooting
@cindex Troubleshooting
@@ -3996,7 +4212,7 @@
if you prefer not to enter electric debug on address@hidden but
you really should try it before you disable it! You can also
customize this variable to enter debug mode when errors are
-encountered too.
+encountered.
@item @strong{I get errors like @samp{Searching for program: no such
file or directory, idl} when attempting to start the IDL shell.}
@@ -4020,11 +4236,11 @@
there, or start Emacs and IDLWAVE from the shell.
@item @strong{I get errors like @samp{Symbol's function is void:
-overlayp} when trying to start the shell in XEmacs}
+overlayp}}
You don't have the @samp{fsf-compat} package installed, which IDLWAVE
-needs to run under XEmacs. Install it and, if necessary, insert
address@hidden(require 'overlay)} in your @file{.emacs}.
+needs to run under XEmacs. Install it, or find an XEmacs distribution
+which includes it by default.
@item @strong{I'm getting errors like @samp{Symbol's value as variable is void:
cl-builtin-gethash} on completion or routine info.}
@@ -4035,7 +4251,12 @@
place, and this is the source of the error. If you recompile (or just
"make; make install") from source, it should resolve this problem.
Another option is to recompile the @file{idlw*.el} files by hand using
address@hidden byte-compile-file}.
address@hidden byte-compile-file}.
address@hidden PARTOFEMACS
+Why not take the opportunity to grab the
+latest IDLWAVE version at @address@hidden, the
+maintainers webpage}.
address@hidden ifclear
@item @address@hidden@key{TAB}} doesn't complete words, it switches
windows on my desktop.}
@@ -4063,7 +4284,7 @@
in your @file{.emacs}:
@lisp
-(setq idlwave-shell-prompt-pattern "^\\(ENVI\\|IDL\\)> ")
+(setq idlwave-shell-prompt-pattern "^\r? ?\\(ENVI\\|IDL\\)> ")
@end lisp
@item @strong{Attempts to set breakpoints fail: no breakpoint is
@@ -4095,7 +4316,8 @@
@end lisp
@noindent You can check on your load-path value using @kbd{C-h v
-load-path @key{RET}}.
+load-path @key{RET}}, and @kbd{C-h m} in an IDLWAVE buffer should show
+you the version Emacs is using.
@item @strong{IDLWAVE is screwing up the formatting of my @file{.idl} files.}
@@ -4117,10 +4339,10 @@
compiled in the shell should be up to date. For other routines, the
information is only as current as the most recent scan. If you have a
rapidly changing set of routines, and you'd like the latest routine
-information to be available for it, one powerful technique makes use of
-the library catalog tool, @samp{idlwave_catalog}. Simply add a line to
-your @samp{cron} file (@samp{crontab -e} will let you edit this on some
-systems), like this:
+information to be available for it, one powerful technique is to make
+use of the library catalog tool, @samp{idlwave_catalog}. Simply add a
+line to your @samp{cron} file (@samp{crontab -e} will let you edit this
+on some systems), like this
@example
45 3 * * 1-5 (cd /path/to/myidllib; /path/to/idlwave_catalog MyLib)
@@ -4130,14 +4352,15 @@
rescan all @file{.pro} files at or below @file{/path/to/myidllib} every
week night at 3:45am. You can even scan site-wide libraries with this
method, and the most recent information will be available to all users.
+Since the scanning is very fast, there is very little impact.
@item @strong{All the Greek-font characters in the HTML help are
displayed as Latin characters!}
-Unfortunately, the HTMLHelp files attempt to switch to
+Unfortunately, the HTMLHelp files RSI provides attempt to switch to
@samp{Symbol} font to display Greek characters, which is not really an
permitted method for doing this in HTML. There is a "workaround" for
-many browsers: @xref{HTML Help Browser Tips}.
+some browsers: @xref{HTML Help Browser Tips}.
@item @strong{In the shell, my long commands are truncated at 256 characters!}
@@ -4150,6 +4373,36 @@
memory-bounded limit), but disables the processing of background
widget events (those with @code{/NO_BLOCK} passed to @code{XManager}).
address@hidden @strong{When I invoke IDL HTML help on a routine, the page which
+is loaded is one page off, e.g. for @code{CONVERT_COORD}, I get
address@hidden
+
+You have a mismatch between your help index and the HTML help package
+you downloaded. You need to ensure you download a ``downgrade kit'' if
+you are using anything older than the latest HTML help package. A new
+help package apppears with each IDL release (assuming the documentation
+is updated).
address@hidden PARTOFEMACS
+See @address@hidden, the maintainers
+webpage} for more.
address@hidden ifclear
+Note that, starting with IDL 6.2, the HTML help and its catalog are
+distributed with IDL, and so should never be inconsistent.
+
address@hidden @strong{I get errors such as @samp{void-variable
+browse-url-browser-function} or similar when attempting to load IDLWAVE
+under XEmacs.}
+
+You don't have the @samp{browse-url} (or other required) XEmacs package.
+Unlike GNU Emacs, XEmacs distributes many packages separately from the
+main program. IDLWAVE is actually among these, but is not always the
+most up to date. When installing IDLWAVE as an XEmacs package, it
+should prompt you for required additional packages. When installing it
+from source, it won't and you'll get this error. The easiest solution
+is to install all the packages when you install XEmacs (the so-called
address@hidden bundle). The minimum set of XEmacs packages required by
+IDLWAVE is @samp{fsf-compat, xemacs-base, mail-lib}.
+
@end enumerate
@node Index, , Troubleshooting, Top
@@ -4157,7 +4410,3 @@
@printindex cp
@bye
-
address@hidden
- arch-tag: f1d73958-1423-4127-b8aa-f7b953d64492
address@hidden ignore
- [Emacs-diffs] Changes to emacs/man/idlwave.texi,
John-David T. Smith <=