[Emacs-diffs] Changes to two-volume.make [EMACS_22_BASE]

[Karl Berry]

CVSROOT:        /sources/emacs
Module name:    emacs
Branch:         EMACS_22_BASE
Changes by:     Karl Berry <karl>       07/06/13 00:45:04

Index: two-volume.make
===================================================================
RCS file: two-volume.make
diff -N two-volume.make
--- /dev/null   1 Jan 1970 00:00:00 -0000
+++ two-volume.make     13 Jun 2007 00:45:03 -0000      1.1.2.2
@@ -0,0 +1,226 @@
+# Copyright 2007 Free Software Foundation, Inc.
+# See end for copying conditions.
+
+# although it would be nice to use tex rather than pdftex to avoid
+# colors, spurious warnings about names being referenced but not
+# existing, etc., dvips | ps2pdf doesn't preserve the page size.
+# Instead of creating a special dvips config file, put up with the warnings.
+tex = pdftex -interaction=nonstopmode
+
+all: vol1.pdf vol2.pdf
+
+# vol1.texi and vol2.texi specially define \tocreadfilename so we can
+# use our premade .toc's.
+# 
+vol1.pdf: elisp1med-fns-ready elisp1med-aux-ready elisp1med-toc-ready
+       @echo -e "\f Final TeX run for volume 1..."
+       cp elisp1med-toc-ready elisp1-toc-ready.toc
+       cp elisp1med-fns-ready vol1.fns
+       cp elisp1med-aux-ready vol1.aux
+       $(tex) vol1.texi
+#
+vol2.pdf: elisp2med-fns-ready elisp2med-aux-ready elisp2med-toc-ready
+       @echo "Final TeX run for volume 2..."
+       cp elisp2med-toc-ready elisp2-toc-ready.toc
+       cp elisp2med-fns-ready vol2.fns
+       cp elisp2med-aux-ready vol2.aux
+       $(tex) vol2.texi
+
+#  intermediate toc files.
+# 
+# vol1 toc: volume 1, page break, volume 2 (with II: prepended).
+elisp1med-toc-ready: elisp1med-init elisp2med-init
+       echo '@address@hidden 1}}{10001}{vol1}{}' >$@
+       cat elisp1med-toc >>$@
+       echo '@page' >>$@
+       echo '@address@hidden 2}}{10001}{vol2}{}' >>$@
+       sed 's/{\([^}]*\)}$$/{II:\1}/' elisp2med-toc >>$@       
+#
+# vol2 toc: volume 1 (with I: prepended), page break, volume 2.
+elisp2med-toc-ready: elisp1med-init elisp2med-init
+       echo '@address@hidden 1}}{10001}{vol1}{}' >$@
+       sed 's/{\([^}]*\)}$$/{I:\1}/' elisp1med-toc >>$@        
+       echo '@page' >>$@
+       echo '@address@hidden 2}}{10001}{vol2}{}' >>$@
+       cat elisp2med-toc >>$@
+
+
+#  intermediate aux files.
+# 
+# append vol2's fixed aux to normal vol1.  
+elisp1med-aux-ready: elisp2med-aux-vol-added
+       cat elisp1med-aux $< >$@
+#
+# prepend vol1's fixed aux to vol2.
+elisp2med-aux-ready: elisp1med-aux-vol-added
+       cat $< elisp2med-aux >$@
+
+# on -pg entries, append volume number after page number.
+elisp1med-aux-vol-added: elisp1med-init
+       sed 's/-pg}{\(.*\)}$$/-pg}{\1, address@hidden/' elisp1med-aux >$@
+#
+elisp2med-aux-vol-added: elisp2med-init
+       sed 's/-pg}{\(.*\)}$$/-pg}{\1, address@hidden/' elisp2med-aux >$@
+       
+
+
+#  intermediate index (fns) file.
+# 
+elisp1med-fns-ready: elisp1med-fn-vol-added elisp2med-fn-vol-added
+       cat elisp2med-fn-vol-added >>vol1.fn
+       texindex vol1.fn
+       cp vol1.fns $@
+#
+elisp2med-fns-ready: elisp1med-fn-vol-added elisp2med-fn-vol-added
+       cat elisp1med-fn-vol-added >>vol2.fn
+       texindex vol2.fn
+       cp vol2.fns $@
+
+# Insert volume number (I: or II:) into index file.
+elisp1med-fn-vol-added: elisp1med-init
+       cp vol1.fn elisp1med-fn
+       sed 's/}{/}{I:/' elisp1med-fn >$@
+#
+elisp2med-fn-vol-added: elisp2med-init
+       cp vol2.fn elisp2med-fn
+       sed 's/}{/}{II:/' elisp2med-fn >$@
+
+# -----------------------------------------------------------------------------
+# everything above is essentially a duplicate of everything below. sorry.
+# -----------------------------------------------------------------------------
+
+#  intermediate TeX runs.
+# 
+# this generates what would be the final versions -- except the page
+# numbers aren't right.  The process of adding the I: and II: changes
+# the page breaks, so a few index entries, at least are wrong.  (In
+# 2007, x-meta-keysym in vol.II ended up on page 374 when the index had
+# it on page 375 from the initial run.)
+# 
+# So, we start all over again, from these fns/aux/toc files.
+# 
+elisp1med-init: elisp1-fns-ready elisp1-aux-ready elisp1init-toc-ready 
texinfo.tex
+       @echo -e "\f Intermediate TeX run for volume 1..."
+       cp elisp1init-toc-ready elisp1-toc-ready.toc
+       cp elisp1-fns-ready vol1.fns
+       cp elisp1-aux-ready vol1.aux
+       $(tex) vol1.texi
+       texindex vol1.??
+       mv vol1.aux elisp1med-aux
+       mv vol1.toc elisp1med-toc
+#
+elisp2med-init: elisp2-fns-ready elisp2-aux-ready elisp2init-toc-ready 
texinfo.tex
+       @echo "Final TeX run for volume 2..."
+       cp elisp2init-toc-ready elisp2-toc-ready.toc
+       cp elisp2-fns-ready vol2.fns
+       cp elisp2-aux-ready vol2.aux
+       $(tex) vol2.texi
+       texindex vol2.??
+       mv vol2.aux elisp2med-aux
+       mv vol2.toc elisp2med-toc
+
+
+#  initial toc files.
+# 
+# vol1 toc: volume 1, page break, volume 2 (with II: prepended).
+elisp1init-toc-ready: elisp1-init elisp2-init
+       echo '@address@hidden 1}}{10001}{vol1}{}' >$@
+       cat elisp1-toc >>$@
+       echo '@page' >>$@
+       echo '@address@hidden 2}}{10001}{vol2}{}' >>$@
+       sed 's/{\([^}]*\)}$$/{II:\1}/' elisp2-toc >>$@  
+#
+# vol2 toc: volume 1 (with I: prepended), page break, volume 2.
+elisp2init-toc-ready: elisp1-init elisp2-init
+       echo '@address@hidden 1}}{10001}{vol1}{}' >$@
+       sed 's/{\([^}]*\)}$$/{I:\1}/' elisp1-toc >>$@   
+       echo '@page' >>$@
+       echo '@address@hidden 2}}{10001}{vol2}{}' >>$@
+       cat elisp2-toc >>$@
+
+
+#  initial aux files.
+# 
+# append vol2's fixed aux to normal vol1.  The initial runs saved
+# elisp1-aux and elisp2-aux.
+elisp1-aux-ready: elisp2-aux-vol-added
+       cat elisp1-aux $< >$@
+#
+# prepend vol1's fixed aux to vol2.
+elisp2-aux-ready: elisp1-aux-vol-added
+       cat $< elisp2-aux >$@
+
+# on -pg entries, append volume number after page number.
+elisp1-aux-vol-added: elisp1-init
+       sed 's/-pg}{\(.*\)}$$/-pg}{\1, address@hidden/' elisp1-aux >$@
+#
+elisp2-aux-vol-added: elisp2-init
+       sed 's/-pg}{\(.*\)}$$/-pg}{\1, address@hidden/' elisp2-aux >$@
+       
+
+#  initial index (fns) file.
+# 
+# Append other volume's index entries to this one's.
+# Index entries in this volume will then take precedence.
+elisp1-fns-ready: elisp1-fn-vol-added elisp2-fn-vol-added
+       cat elisp2-fn-vol-added >>vol1.fn
+       texindex vol1.fn
+       cp vol1.fns $@
+#
+elisp2-fns-ready: elisp1-fn-vol-added elisp2-fn-vol-added
+       cat elisp1-fn-vol-added >>vol2.fn
+       texindex vol2.fn
+       cp vol2.fns $@
+
+# Insert volume number (I: or II:) into index file.
+elisp1-fn-vol-added: elisp1-init
+       cp vol1.fn elisp1-fn
+       sed 's/}{/}{I:/' elisp1-fn >$@
+#
+elisp2-fn-vol-added: elisp2-init
+       cp vol2.fn elisp2-fn
+       sed 's/}{/}{II:/' elisp2-fn >$@
+
+
+#  initial TeX runs.
+# 
+# We use the .fn, .aux, and .toc files created here in subsequent
+# processing.  The page numbers generated here will not be correct yet,
+# but we run texindex and TeX a second time just to get them closer.
+# Otherwise it might take even longer for them to converge.
+# 
+elisp1-init: vol1.texi
+       @echo -e "\f Initial TeX run for volume 1..."
+       rm -f vol1.aux vol1.toc
+       $(tex) $<
+       texindex vol1.??
+       mv vol1.aux elisp1-aux
+       mv vol1.toc elisp1-toc
+       touch $@
+#
+elisp2-init: vol2.texi
+       @echo "Initial TeX run for volume 2..."
+       rm -f vol2.aux vol2.toc
+       $(tex) $<
+       texindex vol2.??
+       mv vol2.aux elisp2-aux
+       mv vol2.toc elisp2-toc
+       touch $@
+
+# COPYING CONDITIONS
+# 
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# 
+# This file is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this file; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301, USA.
+