[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to vip.texi
|
From: |
Glenn Morris |
|
Subject: |
[Emacs-diffs] Changes to vip.texi |
|
Date: |
Thu, 06 Sep 2007 04:41:39 +0000 |
CVSROOT: /sources/emacs
Module name: emacs
Changes by: Glenn Morris <gm> 07/09/06 04:41:39
Index: vip.texi
===================================================================
RCS file: vip.texi
diff -N vip.texi
--- vip.texi 15 Apr 2007 20:57:15 -0000 1.17
+++ /dev/null 1 Jan 1970 00:00:00 -0000
@@ -1,1958 +0,0 @@
-\input texinfo
-
address@hidden ../info/vip
address@hidden VIP
-
address@hidden
-Copyright @copyright{} 1987, 2001, 2002, 2003, 2004,
-2005, 2006, 2007 Free Software Foundation, Inc.
-
address@hidden
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.2 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with the Front-Cover texts being ``A GNU
-Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
-license is included in the section entitled ``GNU Free Documentation
-License'' in the Emacs manual.
-
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software. Copies published by the Free
-Software Foundation raise funds for GNU development.''
-
-This document is part of a collection distributed under the GNU Free
-Documentation License. If you want to distribute this document
-separately from the collection, you can do so by adding a copy of the
-license to the document, as described in section 6 of the license.
address@hidden quotation
address@hidden copying
-
address@hidden
address@hidden 10
address@hidden @titlefont{VIP}
address@hidden 1
address@hidden A Vi Package for GNU Emacs
address@hidden (Version 3.5, September 15, 1987)
address@hidden 2
address@hidden Masahiko Sato
address@hidden
address@hidden 0pt plus1filll
address@hidden
address@hidden titlepage
-
address@hidden Emacs
address@hidden
-* VIP: (vip). An older VI-emulation for Emacs.
address@hidden direntry
-
address@hidden
-
address@hidden
address@hidden Top, Survey,, (DIR)
address@hidden VIP
-
-VIP is a Vi emulating package written in Emacs Lisp. VIP implements most
-Vi commands including Ex commands. It is therefore hoped that this package
-will enable you to do Vi style editing under the powerful GNU Emacs
-environment. This info file describes the usage of VIP assuming that you
-are fairly accustomed to Vi but not so much with Emacs. Also we will
-concentrate mainly on differences from Vi, especially features unique to
-VIP.
-
-It is recommended that you read nodes on survey and on customization before
-you start using VIP. Other nodes may be visited as needed.
-
-Comments and bug reports are welcome. Please send messages to
address@hidden@@Sail.Stanford.Edu} if you are outside of Japan and to
address@hidden@@sato.riec.tohoku.junet} if you are in address@hidden
-
address@hidden ifnottex
-
address@hidden
-* Survey:: A survey of VIP.
-* Vi Commands:: Details of Vi commands.
-* Ex Commands:: Details of Ex commands.
-* Customization:: How to customize VIP.
-* GNU Free Documentation License:: The license for this documentation.
-
address@hidden menu
address@hidden
address@hidden Introduction
-
-VIP is a Vi emulating package written in Emacs Lisp. VIP implements most
-Vi commands including Ex commands. It is therefore hoped that this package
-will enable you to do Vi style editing under the powerful GNU Emacs
-environment. This manual describes the usage of VIP assuming that you are
-fairly accustomed to Vi but not so much with Emacs. Also we will
-concentrate mainly on differences from Vi, especially features unique to
-VIP.
-
-It is recommended that you read chapters on survey and on customization
-before you start using VIP. Other chapters may be used as future
-references.
-
-Comments and bug reports are welcome. Please send messages to
address@hidden@@Sail.Stanford.Edu} if you are outside of Japan and to
address@hidden@@unsun.riec.tohoku.junet} if you are in Japan.
address@hidden iftex
-
address@hidden Survey, Basic Concepts, Top, Top
address@hidden A Survey of VIP
-
-In this chapter we describe basics of VIP with emphasis on the features not
-found in Vi and on how to use VIP under GNU Emacs.
-
address@hidden
-* Basic Concepts:: Basic concepts in Emacs.
-* Loading VIP:: How to load VIP automatically.
-* Modes in VIP:: VIP has three modes, which are orthogonal to modes
- in Emacs.
-* Differences from Vi:: Differences of VIP from Vi is explained.
address@hidden menu
-
address@hidden Basic Concepts, Loading VIP, Survey, Survey
address@hidden Basic Concepts
-
-We begin by explaining some basic concepts of Emacs. These concepts are
-explained in more detail in the GNU Emacs Manual.
-
address@hidden buffer
address@hidden point
address@hidden mark
address@hidden text
address@hidden looking at
address@hidden end (of buffer)
address@hidden region
-
-Conceptually, a @dfn{buffer} is just a string of @acronym{ASCII} characters
and two
-special characters @key{PNT} (@dfn{point}) and @key{MRK} (@dfn{mark}) such
-that the character @key{PNT} occurs exactly once and @key{MRK} occurs at
-most once. The @dfn{text} of a buffer is obtained by deleting the
-occurrences of @key{PNT} and @key{MRK}. If, in a buffer, there is a
-character following @key{PNT} then we say that point is @dfn{looking at}
-the character; otherwise we say that point is @dfn{at the end of buffer}.
address@hidden and @key{MRK} are used
-to indicate positions in a buffer and they are not part of the text of the
-buffer. If a buffer contains a @key{MRK} then the text between @key{MRK}
-and @key{PNT} is called the @dfn{region} of the address@hidden
-
address@hidden window
-
-Emacs provides (multiple) @dfn{windows} on the screen, and you can see the
-content of a buffer through the window associated with the buffer. The
-cursor of the screen is always positioned on the character after @key{PNT}.
address@hidden
-
address@hidden mode
address@hidden keymap
address@hidden local keymap
address@hidden global keymap
-
-A @dfn{keymap} is a table that records the bindings between characters and
-command functions. There is the @dfn{global keymap} common to all the
-buffers. Each buffer has its @dfn{local keymap} that determines the
address@hidden of the buffer. Local keymap overrides global keymap, so that if
-a function is bound to some key in the local keymap then that function will
-be executed when you type the key. If no function is bound to a key in the
-local map, however, the function bound to the key in the global map becomes
-in address@hidden
-
address@hidden Loading VIP, Modes in VIP, Basic Concepts, Survey
address@hidden Loading VIP
-
-The recommended way to load VIP automatically is to include the line:
address@hidden
-(load "vip")
address@hidden example
address@hidden
-in your @file{.emacs} file. The @file{.emacs} file is placed in your home
-directory and it will be executed every time you invoke Emacs. If you wish
-to be in vi mode whenever Emacs starts up, you can include the following
-line in your @file{.emacs} file instead of the above line:
address@hidden
-(setq term-setup-hook 'vip-mode)
address@hidden example
address@hidden
-(@xref{Vi Mode}, for the explanation of vi mode.)
-
-Even if your @file{.emacs} file does not contain any of the above lines,
-you can load VIP and enter vi mode by typing the following from within
-Emacs.
address@hidden
-M-x vip-mode
address@hidden example
address@hidden
-
address@hidden Modes in VIP, Emacs Mode, Loading VIP, Survey
address@hidden Modes in VIP
-
address@hidden 032 @kbd{C-z} (@code{vip-change-mode-to-vi})
address@hidden 0301 @kbd{C-x C-z} (@code{suspend-emacs})
-
-Loading VIP has the effect of globally binding @kbd{C-z} (@kbd{Control-z})
-to the function @code{vip-change-mode-to-vi}. The default binding of @kbd{C-z}
-in GNU Emacs is @code{suspend-emacs}, but, you can also call
address@hidden by typing @kbd{C-x C-z}. Other than this, all the
-key bindings of Emacs remain the same after loading address@hidden
-
address@hidden vi mode
-
-Now, if you hit @kbd{C-z}, the function @code{vip-change-mode-to-vi} will be
-called and you will be in @dfn{vi mode}. (Some major modes may locally bind
address@hidden to some special functions. In such cases, you can call
address@hidden by @code{execute-extended-command} which is
-invoked by @kbd{M-x}. Here @kbd{M-x} means @kbd{Meta-x}, and if your
-terminal does not have a @key{META} key you can enter it by typing
address@hidden@key{ESC} x}. The same effect can also be achieve by typing
address@hidden vip-mode}.)@refill
-
address@hidden mode line
-
-You can observe the change of mode by looking at the @dfn{mode line}. For
-instance, if the mode line is:@refill
address@hidden
------Emacs: *scratch* (Lisp Interaction)----All------------
address@hidden example
address@hidden
-then it will change to:
address@hidden
------Vi: *scratch* (Lisp Interaction)----All------------
address@hidden example
address@hidden
-Thus the word @samp{Emacs} in the mode line will change to @samp{Vi}.
-
address@hidden insert mode
address@hidden emacs mode
-
-You can go back to the original @dfn{emacs mode} by typing @kbd{C-z} in
-vi mode. Thus @kbd{C-z} toggles between these two address@hidden
-
-Note that modes in VIP exist orthogonally to modes in Emacs. This means
-that you can be in vi mode and at the same time, say, shell mode.
-
-Vi mode corresponds to Vi's command mode. From vi mode you can enter
address@hidden mode} (which corresponds to Vi's insert mode) by usual Vi command
-keys like @kbd{i}, @kbd{a}, @kbd{o} @dots{} etc.
-
-In insert mode, the mode line will look like this:
address@hidden
------Insert *scratch* (Lisp Interaction)----All------------
address@hidden example
address@hidden
-You can exit from insert mode by hitting @key{ESC} key as you do in Vi.
-
-That VIP has three modes may seem very complicated, but in fact it is not
-so. VIP is implemented so that you can do most editing remaining only
-in the two modes for Vi (that is vi mode and insert mode).
-
address@hidden
-The figure below shows the transition of three modes in VIP.
address@hidden
-
-
- === C-z ==> == i,o ... ==>
-emacs mode vi mode insert mode
- <== X-z === <=== ESC ====
address@hidden display
address@hidden ifinfo
-
address@hidden
-* Emacs Mode:: This is the mode you should know better.
-* Vi Mode:: Vi commands are executed in this mode.
-* Insert Mode:: You can enter text, and also can do editing if
you
- know enough Emacs commands.
address@hidden menu
-
address@hidden Emacs Mode, Vi Mode, Modes in VIP, Modes in VIP
address@hidden Emacs Mode
-
address@hidden 032 @kbd{C-z} (@code{vip-change-mode-to-vi})
-
-You will be in this mode just after you loaded VIP. You can do all
-normal Emacs editing in this mode. Note that the key @kbd{C-z} is globally
-bound to @code{vip-change-mode-to-vi}. So, if you type @kbd{C-z} in this mode
-then you will be in vi address@hidden
-
address@hidden Vi Mode, Insert Mode, Emacs Mode, Modes in VIP
address@hidden Vi Mode
-
-This mode corresponds to Vi's command mode. Most Vi commands work as they
-do in Vi. You can go back to emacs mode by typing @kbd{C-z}. You can
-enter insert mode, just as in Vi, by typing @kbd{i}, @kbd{a} etc.
-
address@hidden Insert Mode, Differences from Vi, Vi Mode, Modes in VIP
address@hidden Insert Mode
-
-The key bindings in this mode is the same as in the emacs mode except for
-the following 4 keys. So, you can move around in the buffer and change
-its content while you are in insert mode.
-
address@hidden @kbd
address@hidden @key{ESC}
address@hidden 033 @kbd{ESC} (@code{vip-change-mode-to-vi}) (insert mode)
-This key will take you back to vi mode.
address@hidden C-h
address@hidden 010 @kbd{C-h} (@code{vip-delete-backward-char}) (insert mode)
-Delete previous character.
address@hidden C-w
address@hidden 027 @kbd{C-w} (@code{vip-delete-backward-word}) (insert mode)
-Delete previous word.
address@hidden C-z
address@hidden 032 @kbd{C-z} (@code{vip-ESC}) (insert mode)
-Typing this key has the same effect as typing @key{ESC} in emacs mode.
-Thus typing @kbd{C-z x} in insert mode will have the same effect as typing
address@hidden x} in emacs mode.
address@hidden table
-
address@hidden Differences from Vi, Undoing, Insert Mode, Survey
address@hidden Differences from Vi
-
-The major differences from Vi are explained below.
-
address@hidden
-* Undoing:: You can undo more in VIP.
-* Changing:: Commands for changing the text.
-* Searching:: Search commands.
-* z Command:: You can now use zH, zM and zL as well as z- etc.
-* Counts:: Some Vi commands which do not accept a count now
- accept one.
-* Marking:: You can now mark the current point, beginning of
- the buffer etc.
-* Region Commands:: You can now give a region as an argument for delete
- commands etc.
-* New Commands:: Some new commands not available in Vi are added.
-* New Bindings:: Bindings of some keys are changed for the
- convenience of editing under Emacs.
-* Window Commands:: Commands for moving among windows etc.
-* Buffer Commands:: Commands for selecting buffers etc.
-* File Commands:: Commands for visiting files etc.
-* Misc Commands:: Other useful commands.
address@hidden menu
-
address@hidden Undoing, Changing, Differences from Vi, Differences from Vi
address@hidden Undoing
-
address@hidden 165 @kbd{u} (@code{vip-undo})
address@hidden 056 @kbd{.} (@code{vip-repeat})
-
-You can repeat undoing by the @kbd{.} key. So, @kbd{u} will undo
-a single change, while @kbd{u .@: .@: .@:}, for instance, will undo 4 previous
-changes. Undo is undoable as in Vi. So the content of the buffer will
-be the same before and after @kbd{u address@hidden
-
address@hidden Changing, Searching, Undoing, Differences from Vi
address@hidden Changing
-
-Some commands which change a small number of characters are executed
-slightly differently. Thus, if point is at the beginning of a word
address@hidden and you wished to change it to @samp{bar} by typing
@address@hidden w}},
-then VIP will prompt you for a new word in the minibuffer by the prompt
address@hidden => }. You can then enter @samp{bar} followed by @key{RET} or
address@hidden to complete the command. Before you enter @key{RET} or
address@hidden you can abort the command by typing @kbd{C-g}. In general,
address@hidden 007 @kbd{C-g} (@code{vip-keyboard-quit})
-you can abort a partially formed command by typing @address@hidden
-
address@hidden Searching, z Command, Changing, Differences from Vi
address@hidden Searching
-
address@hidden 057 @kbd{/} (@code{vip-search-forward})
address@hidden 077 @kbd{?} (@code{vip-search-backward})
-
-As in Vi, searching is done by @kbd{/} and @kbd{?}. The string will be
-searched literally by default. To invoke a regular expression search,
-first execute the search command @kbd{/} (or @kbd{?}) with empty search
-string. (I.e, type @kbd{/} followed by @key{RET}.)
-A search for empty string will toggle the search mode between vanilla
-search and regular expression search. You cannot give an offset to the
-search string. (It is a limitation.) By default, search will wrap around
-the buffer as in Vi. You can change this by rebinding the variable
address@hidden @xref{Customization}, for how to do address@hidden
-
address@hidden z Command, Counts, Searching, Differences from Vi
address@hidden z Command
-
address@hidden 1723 @kbd{z H} (@code{vip-line-to-top})
address@hidden 1721 @kbd{z RET} (@code{vip-line-to-top})
address@hidden 1723 @kbd{z M} (@code{vip-line-to-middle})
address@hidden 1722 @kbd{z .} (@code{vip-line-to-middle})
address@hidden 1723 @kbd{z L} (@code{vip-line-to-bottom})
address@hidden 1722 @kbd{z -} (@code{vip-line-to-bottom})
-
-For those of you who cannot remember which of @kbd{z} followed by @key{RET},
address@hidden@: and @kbd{-} do what. You can also use @kbd{z} followed by
@kbd{H},
address@hidden and @kbd{L} to place the current line in the Home (Middle, and
-Last) line of the address@hidden
-
address@hidden Counts, Marking, z Command, Differences from Vi
address@hidden Counts
-
-Some Vi commands which do not accept a count now accept one
-
address@hidden @kbd
address@hidden p
address@hidden P
address@hidden 160 @kbd{p} (@code{vip-put-back})
address@hidden 120 @kbd{P} (@code{vip-Put-back})
-Given counts, text will be yanked (in Vi's sense) that many times. Thus
address@hidden p} is the same as @kbd{p p p}.
address@hidden o
address@hidden O
address@hidden 157 @kbd{o} (@code{vip-open-line})
address@hidden 117 @kbd{O} (@code{vip-Open-line})
-Given counts, that many copies of text will be inserted. Thus
address@hidden a b c @key{ESC}} will insert 3 lines of @samp{abc} below the
current
-line.
address@hidden /
address@hidden ?
address@hidden 057 @kbd{/} (@code{vip-search-forward})
address@hidden 077 @kbd{?} (@code{vip-search-backward})
-Given a count @var{n}, @var{n}-th occurrence will be searched.
address@hidden table
-
address@hidden Marking, Region Commands, Counts, Differences from Vi
address@hidden Marking
-
-Typing an @kbd{m} followed by a lower-case character @var{ch} marks the
-point to the register named @var{ch} as in Vi. In addition to these, we
-have following key bindings for marking.
-
address@hidden 155 @kbd{m} (@code{vip-mark-point})
-
address@hidden @kbd
address@hidden m <
-Set mark at the beginning of buffer.
address@hidden m >
-Set mark at the end of buffer.
address@hidden m .
-Set mark at point (and push old mark on mark ring).
address@hidden m ,
-Jump to mark (and pop mark off the mark ring).
address@hidden table
-
address@hidden Region Commands, New Commands, Marking, Differences from Vi
address@hidden Region Commands
-
address@hidden region
-
-Vi operators like @kbd{d}, @kbd{c} etc. are usually used in combination
-with motion commands. It is now possible to use current region as the
-argument to these operators. (A @dfn{region} is a part of buffer
-delimited by point and mark.) The key @kbd{r} is used for this purpose.
-Thus @kbd{d r} will delete the current region. If @kbd{R} is used instead
-of @kbd{r} the region will first be enlarged so that it will become the
-smallest region containing the original region and consisting of whole
-lines. Thus @kbd{m .@: d R} will have the same effect as @kbd{d address@hidden
-
address@hidden New Commands, New Bindings, Region Commands, Differences from Vi
address@hidden Some New Commands
-
-Note that the keys below (except for @kbd{R}) are not used in Vi.
-
address@hidden @kbd
address@hidden C-a
address@hidden 001 @kbd{C-a} (@code{vip-beginning-of-line})
-Move point to the beginning of line.
address@hidden C-n
address@hidden 016 @kbd{C-n} (@code{vip-next-window})
-If you have two or more windows in the screen, this key will move point to
-the next window.
address@hidden C-o
address@hidden 017 @kbd{C-o} (@code{vip-open-line-at-point})
-Insert a newline and leave point before it, and then enter insert mode.
address@hidden C-r
address@hidden 022 @kbd{C-r} (@code{isearch-backward})
-Backward incremental search.
address@hidden C-s
address@hidden 023 @kbd{C-s} (@code{isearch-forward})
-Forward incremental search.
address@hidden C-c
address@hidden C-x
address@hidden @key{ESC}
address@hidden 003 @kbd{C-c} (@code{vip-ctl-c})
address@hidden 0300 @kbd{C-x} (@code{vip-ctl-x})
address@hidden 033 @kbd{ESC} (@code{vip-ESC})
-These keys will exit from vi mode and return to emacs mode temporarily. If
-you hit one of these keys, Emacs will be in emacs mode and will believe
-that you hit that key in emacs mode. For example, if you hit @kbd{C-x}
-followed by @kbd{2}, then the current window will be split into 2 and you
-will be in vi mode again.
address@hidden \
address@hidden 134 @kbd{\} (@code{vip-escape-to-emacs})
-Escape to emacs mode. Hitting @kbd{\} will take you to emacs mode, and you
-can execute a single Emacs command. After executing the Emacs command you
-will be in vi mode again. You can give a count before typing @kbd{\}.
-Thus @kbd{5 \ *}, as well as @kbd{\ C-u 5 *}, will insert @samp{*****}
-before point. Similarly @kbd{1 0 \ C-p} will move the point 10 lines above
-the current address@hidden
address@hidden K
address@hidden 113 @kbd{K} (@code{vip-kill-buffer})
-Kill current buffer if it is not modified. Useful when you selected a
-buffer which you did not want.
address@hidden Q
address@hidden R
address@hidden 121 @kbd{Q} (@code{vip-query-replace})
address@hidden 122 @kbd{R} (@code{vip-replace-string})
address@hidden is for query replace and @kbd{R} is for replace. By default,
-string to be replaced are treated literally. If you wish to do a regular
-expression replace, first do replace with empty string as the string to be
-replaced. In this way, you can toggle between vanilla and regular
-expression replacement.
address@hidden v
address@hidden V
address@hidden 166 @kbd{v} (@code{vip-find-file})
address@hidden 126 @kbd{V} (@code{vip-find-file-other-window})
-These keys are used to Visit files. @kbd{v} will switch to a buffer
-visiting file whose name can be entered in the minibuffer. @kbd{V} is
-similar, but will use window different from the current window.
address@hidden #
address@hidden 0430 @kbd{#} (@code{vip-command-argument})
-If followed by a certain character @var{ch}, it becomes an operator whose
-argument is the region determined by the motion command that follows.
-Currently, @var{ch} can be one of @kbd{c}, @kbd{C}, @kbd{g}, @kbd{q} and
address@hidden@refill
address@hidden # c
address@hidden 0432 @kbd{# c} (@code{downcase-region})
-Change upper-case characters in the region to lower case
-(@code{downcase-region}).
address@hidden # C
address@hidden 0431 @kbd{# C} (@code{upcase-region})
-Change lower-case characters in the region to upper case. For instance,
address@hidden C 3 w} will capitalize 3 words from the current point
-(@code{upcase-region}).
address@hidden # g
address@hidden 0432 @kbd{# g} (@code{vip-global-execute})
-Execute last keyboard macro for each line in the region
-(@code{vip-global-execute})address@hidden
address@hidden # q
address@hidden 0432 @kbd{# q} (@code{vip-quote-region})
-Insert specified string at the beginning of each line in the region
-(@code{vip-quote-region}).
address@hidden # s
address@hidden 0432 @kbd{# s} (@code{spell-region})
-Check spelling of words in the region (@code{spell-region}).
address@hidden *
address@hidden 052 @kbd{*} (@code{vip-call-last-kbd-macro})
-Call last keyboard macro.
address@hidden table
-
address@hidden New Bindings, Window Commands, New Commands, Differences from Vi
address@hidden New Key Bindings
-
-In VIP the meanings of some keys are entirely different from Vi. These key
-bindings are done deliberately in the hope that editing under Emacs will
-become easier. It is however possible to rebind these keys to functions
-which behave similarly as in Vi. @xref{Customizing Key Bindings}, for
-details.
-
address@hidden @kbd
address@hidden C-g
address@hidden g
address@hidden 007 @kbd{C-g} (@code{vip-keyboard-quit})
address@hidden 147 @kbd{g} (@code{vip-info-on-file})
-In Vi, @kbd{C-g} is used to get information about the file associated to
-the current buffer. Here, @kbd{g} will do that, and @kbd{C-g} is
-used to abort a command (this is for compatibility with emacs mode.)
address@hidden SPC
address@hidden @key{RET}
address@hidden 040 @kbd{SPC} (@code{vip-scroll})
address@hidden 015 @kbd{RET} (@code{vip-scroll-back})
-Now these keys will scroll up and down the text of current window.
-Convenient for viewing the text.
address@hidden s
address@hidden S
address@hidden 163 @kbd{s} (@code{vip-switch-to-buffer})
address@hidden 123 @kbd{S} (@code{vip-switch-to-buffer-other-window})
-They are used to switch to a specified buffer. Useful for switching to
-already existing buffer since buffer name completion is provided. Also
-a default buffer will be given as part of the prompt, to which you can
-switch by just typing @key{RET} key. @kbd{s} is used to select buffer
-in the current window, while @kbd{S} selects buffer in another window.
address@hidden C
address@hidden X
address@hidden 103 @kbd{C} (@code{vip-ctl-c-equivalent})
address@hidden 1300 @kbd{X} (@code{vip-ctl-x-equivalent})
-These keys will exit from vi mode and return to emacs mode temporarily.
-If you type @kbd{C} (@kbd{X}), Emacs will be in emacs mode and will believe
-that you have typed @kbd{C-c} (@kbd{C-x}, resp.) in emacs mode. Moreover,
-if the following character you type is an upper-case letter, then Emacs
-will believe that you have typed the corresponding control character.
-You will be in vi mode again after the command is executed. For example,
-typing @kbd{X S} in vi mode is the same as typing @kbd{C-x C-s} in emacs
-mode. You get the same effect by typing @kbd{C-x C-s} in vi mode, but
-the idea here is that you can execute useful Emacs commands without typing
-control characters. For example, if you hit @kbd{X} (or @kbd{C-x}) followed
-by @kbd{2}, then the current window will be split into 2 and you will be in
-vi mode address@hidden
address@hidden table
-
-In addition to these, @code{ctl-x-map} is slightly modified:
-
address@hidden 1301 @kbd{X 3} (@code{vip-buffer-in-two-windows})
-
address@hidden @kbd
address@hidden X 3
address@hidden C-x 3
-This is equivalent to @kbd{C-x 1 C-x 2} (1 + 2 = 3).
address@hidden table
-
address@hidden Window Commands, Buffer Commands, New Bindings, Differences from
Vi
address@hidden Window Commands
-
-In this and following subsections, we give a summary of key bindings for
-basic functions related to windows, buffers and files.
-
address@hidden @kbd
address@hidden C-n
address@hidden 016 @kbd{C-n} (@code{vip-next-window})
-Switch to next window.
address@hidden X 1
address@hidden C-x 1
address@hidden 1301 @kbd{X 1} (@code{delete-other-windows})
-Delete other windows.
address@hidden X 2
address@hidden C-x 2
address@hidden 1301 @kbd{X 2} (@code{split-window-vertically})
-Split current window into two windows.
address@hidden X 3
address@hidden C-x 3
address@hidden 1301 @kbd{X 3} (@code{vip-buffer-in-two-windows})
-Show current buffer in two windows.
address@hidden table
-
address@hidden Buffer Commands, File Commands, Window Commands, Differences
from Vi
address@hidden Buffer Commands
-
address@hidden @kbd
address@hidden s
address@hidden 163 @kbd{s} (@code{vip-switch-to-buffer})
-Switch to the specified buffer in the current window
-(@code{vip-switch-to-buffer}).
address@hidden S
address@hidden 123 @kbd{S} (@code{vip-switch-to-buffer-other-window})
-Switch to the specified buffer in another window
-(@code{vip-switch-to-buffer-other-window}).
address@hidden K
address@hidden 113 @kbd{K} (@code{vip-kill-buffer})
-Kill the current buffer if it is not modified.
address@hidden X S
address@hidden C-x C-s
address@hidden 1302 @kbd{X S} (@code{save-buffer})
-Save the current buffer in the file associated to the buffer.
address@hidden table
-
address@hidden File Commands, Misc Commands, Buffer Commands, Differences from
Vi
address@hidden File Commands
-
address@hidden @kbd
address@hidden v
address@hidden 166 @kbd{v} (@code{vip-find-file})
-Visit specified file in the current window.
address@hidden V
address@hidden 126 @kbd{V} (@code{vip-find-file-other-window})
-Visit specified file in another window.
address@hidden X W
address@hidden C-x C-w
address@hidden 1302 @kbd{X W} (@code{write-file})
-Write current buffer into the specified file.
address@hidden X I
address@hidden C-x C-i
address@hidden 1302 @kbd{X I} (@code{insert-file})
-
-Insert specified file at point.
address@hidden table
-
address@hidden Misc Commands, Vi Commands, File Commands, Differences from Vi
address@hidden Miscellaneous Commands
-
address@hidden @kbd
address@hidden X (
address@hidden C-x (
address@hidden 1301 @kbd{X (} (@code{start-kbd-macro})
-Start remembering keyboard macro.
address@hidden X )
address@hidden C-x )
address@hidden 1301 @kbd{X )} (@code{end-kbd-macro})
-Finish remembering keyboard macro.
address@hidden *
address@hidden 052 @kbd{*} (@code{vip-call-last-kbd-macro})
-Call last remembered keyboard macro.
address@hidden X Z
address@hidden C-x C-z
address@hidden 1302 @kbd{X Z} (@code{suspend-emacs})
-Suspend Emacs.
address@hidden Z Z
-Exit Emacs.
address@hidden Q
-Query replace.
address@hidden R
-Replace.
address@hidden table
-
address@hidden Vi Commands, Numeric Arguments, Misc Commands, Top
address@hidden Vi Commands
-
-This chapter describes Vi commands other than Ex commands implemented in
-VIP. Except for the last section which discusses insert mode, all the
-commands described in this chapter are to be used in vi mode.
-
address@hidden
-* Numeric Arguments:: Many commands accept numeric arguments
-* Important Keys:: Some very important keys.
-* Buffers and Windows:: Commands for handling buffers and windows.
-* Files:: Commands for handling files.
-* Viewing the Buffer:: How you can view the current buffer.
-* Mark Commands:: Marking positions in a buffer.
-* Motion Commands:: Commands for moving point.
-* Searching and Replacing:: Commands for searching and replacing.
-* Modifying Commands:: Commands for modifying the buffer.
-* Other Vi Commands:: Miscellaneous Commands.
-* Commands in Insert Mode:: Commands for entering insert mode.
address@hidden menu
-
address@hidden Numeric Arguments, Important Keys, Vi Commands, Vi Commands
address@hidden Numeric Arguments
-
address@hidden numeric arguments
address@hidden count
address@hidden 061 @kbd{1} (numeric argument)
address@hidden 062 @kbd{2} (numeric argument)
address@hidden 063 @kbd{3} (numeric argument)
address@hidden 064 @kbd{4} (numeric argument)
address@hidden 065 @kbd{5} (numeric argument)
address@hidden 066 @kbd{6} (numeric argument)
address@hidden 067 @kbd{7} (numeric argument)
address@hidden 068 @kbd{8} (numeric argument)
address@hidden 069 @kbd{9} (numeric argument)
-
-Most Vi commands accept a @dfn{numeric argument} which can be supplied as
-a prefix to the commands. A numeric argument is also called a @dfn{count}.
-In many cases, if a count is given, the command is executed that many times.
-For instance, @kbd{5 d d} deletes 5 lines while simple @kbd{d d} deletes a
-line. In this manual the metavariable @var{n} will denote a address@hidden
-
address@hidden Important Keys, Buffers and Windows, Numeric Arguments, Vi
Commands
address@hidden Important Keys
-
-The keys @kbd{C-g} and @kbd{C-l} are unique in that their associated
-functions are the same in any of emacs, vi and insert mode.
-
address@hidden @kbd
address@hidden C-g
address@hidden 007 @kbd{C-g} (@code{vip-keyboard-quit})
-Quit. Cancel running or partially typed command (@code{keyboard-quit}).
address@hidden C-l
address@hidden 014 @kbd{C-l} (@code{recenter})
-Clear the screen and reprint everything (@code{recenter}).
address@hidden table
-
-In Emacs many commands are bound to the key strokes that start with
address@hidden, @kbd{C-c} and @key{ESC}. These commands can be
-accessed from vi mode as easily as from emacs address@hidden
-
address@hidden @kbd
address@hidden C-x
address@hidden C-c
address@hidden @key{ESC}
address@hidden 003 @kbd{C-c} (@code{vip-ctl-c})
address@hidden 0300 @kbd{C-x} (@code{vip-ctl-x})
address@hidden 033 @kbd{ESC} (@code{vip-ESC})
-Typing one of these keys have the same effect as typing it in emacs mode.
-Appropriate command will be executed according as the keys you type after
-it. You will be in vi mode again after the execution of the command.
-For instance, if you type @address@hidden <} (in vi mode) then the cursor will
-move to the beginning of the buffer and you will still be in vi mode.
address@hidden C
address@hidden X
address@hidden 103 @kbd{C} (@code{vip-ctl-c-equivalent})
address@hidden 1300 @kbd{X} (@code{vip-ctl-x-equivalent})
-Typing one of these keys have the effect of typing the corresponding
-control character in emacs mode. Moreover, if you type an upper-case
-character following it, that character will also be translated to the
-corresponding control character. Thus typing @kbd{X W} in vi mode is the
-same as typing @kbd{C-x C-w} in emacs mode. You will be in vi mode again
-after the execution of a command.
address@hidden \
address@hidden 134 @kbd{\} (@code{vip-escape-to-emacs})
-Escape to emacs mode. Hitting the @kbd{\} key will take you to emacs mode,
-and you can execute a single Emacs command. After executing the
-Emacs command you will be in vi mode again. You can give a count before
-typing @kbd{\}. Thus @kbd{5 \ +}, as well as @kbd{\ C-u 5 +}, will insert
address@hidden before address@hidden
address@hidden table
-
address@hidden Buffers and Windows, Files, Important Keys, Vi Commands
address@hidden Buffers and Windows
-
address@hidden buffer
address@hidden selected buffer
address@hidden current buffer
-
-In Emacs the text you edit is stored in a @dfn{buffer}.
-See GNU Emacs Manual, for details. There is always one @dfn{current}
-buffer, also called the @dfn{selected address@hidden
-
address@hidden window
address@hidden modified (buffer)
-
-You can see the contents of buffers through @dfn{windows} created by Emacs.
-When you have multiple windows on the screen only one of them is selected.
-Each buffer has a unique name, and each window has a mode line which shows
-the name of the buffer associated with the window and other information
-about the status of the buffer. You can change the format of the mode
-line, but normally if you see @samp{**} at the beginning of a mode line it
-means that the buffer is @dfn{modified}. If you write out the content of
-the buffer to a file, then the buffer will become not modified. Also if
-you see @samp{%%} at the beginning of the mode line, it means that the file
-associated with the buffer is write protected.
-
-We have the following commands related to windows and buffers.
-
address@hidden @kbd
address@hidden C-n
address@hidden 016 @kbd{C-n} (@code{vip-next-window})
-Move cursor to the next-window (@code{vip-next-window}).
address@hidden X 1
address@hidden 1301 @kbd{X 1} (@code{delete-other-windows})
-Delete other windows and make the selected window fill the screen
address@hidden(@code{delete-other-windows}).
address@hidden X 2
address@hidden 1301 @kbd{X 2} (@code{split-window-vertically})
-Split current window into two windows (@code{split-window-vertically}).
address@hidden X 3
address@hidden 1301 @kbd{X 3} (@code{vip-buffer-in-two-windows})
-Show current buffer in two windows.
address@hidden s @var{buffer} @key{RET}
address@hidden 163 @kbd{s} (@code{vip-switch-to-buffer})
-Select or create a buffer named @var{buffer} (@code{vip-switch-to-buffer}).
address@hidden S @var{buffer} @key{RET}
address@hidden 123 @kbd{S} (@code{vip-switch-to-buffer-other-window})
-Similar but select a buffer named @var{buffer} in another window
address@hidden(@code{vip-switch-to-buffer-other-window}).
address@hidden K
address@hidden 113 @kbd{K} (@code{vip-kill-buffer})
-Kill the current buffer if it is not modified or if it is not associated
-with a file @*(@code{vip-kill-buffer}).
address@hidden X B
address@hidden 1302 @kbd{X B} (@code{list-buffers})
-List the existing buffers (@code{list-buffers}).
address@hidden table
-
address@hidden buffer name completion
-
-As @dfn{buffer name completion} is provided, you have only to type in
-initial substring of the buffer name which is sufficient to identify it
-among names of existing buffers. After that, if you hit @key{TAB} the rest
-of the buffer name will be supplied by the system, and you can confirm it
-by @key{RET}. The default buffer name to switch to will also be prompted,
-and you can select it by giving a simple @key{RET}. See GNU Emacs Manual
-for details of completion.
-
address@hidden Files, Viewing the Buffer, Buffers and Windows, Vi Commands
address@hidden Files
-
-We have the following commands related to files. They are used to visit,
-save and insert files.
-
address@hidden @kbd
address@hidden v @var{file} @key{RET}
address@hidden 166 @kbd{v} (@code{vip-find-file})
-Visit specified file in the current window (@code{vip-find-file}).
address@hidden V @var{file} @key{RET}
address@hidden 126 @kbd{V} (@code{vip-find-file-other-window})
-Visit specified file in another window (@code{vip-find-file-other-window}).
address@hidden X S
address@hidden 1302 @kbd{X S} (@code{save-buffer})
-Save current buffer to the file associated with the buffer. If no file is
-associated with the buffer, the name of the file to write out the content
-of the buffer will be asked in the minibuffer.
address@hidden X W @var{file} @key{RET}
address@hidden 1302 @kbd{X W} (@code{write-file})
-Write current buffer into a specified file.
address@hidden X I @var{file} @key{RET}
address@hidden 1302 @kbd{X I} (@code{insert-file})
-Insert a specified file at point.
address@hidden g
address@hidden 147 @kbd{g} (@code{vip-info-on-file})
-Give information on the file associated with the current buffer. Tell you
-the name of the file associated with the buffer, the line number of the
-current point and total line numbers in the buffer. If no file is
-associated with the buffer, this fact will be indicated by the null file
-name @samp{""}.
address@hidden table
-
address@hidden visiting (a file)
address@hidden default directory
-
-In Emacs, you can edit a file by @dfn{visiting} it. If you wish to visit a
-file in the current window, you can just type @kbd{v}. Emacs maintains the
address@hidden directory} which is specific to each buffer. Suppose, for
-instance, that the default directory of the current buffer is
address@hidden/usr/masahiko/lisp/}. Then you will get the following prompt in
the
address@hidden
address@hidden
-visit file: /usr/masahiko/lisp/
address@hidden example
address@hidden
address@hidden file name completion
-If you wish to visit, say, @file{vip.el} in this directory, then you can
-just type @samp{vip.el} followed by @key{RET}. If the file @file{vip.el}
-already exists in the directory, Emacs will visit that file, and if not,
-the file will be created. Emacs will use the file name (@file{vip.el}, in
-this case) as the name of the buffer visiting the file. In order to make
-the buffer name unique, Emacs may append @samp{<2>}, @samp{<3>} etc., to
-the buffer name. As the @dfn{file name completion} is provided here, you
-can sometime save typing. For instance, suppose there is only one file in the
-default directory whose name starts with @samp{v}, that is @samp{vip.el}.
-Then if you just type @kbd{v @key{TAB}} then it will be completed to
address@hidden Thus, in this case, you just have to type @kbd{v v @key{TAB}
address@hidden to visit @file{/usr/masahiko/lisp/vip.el}. Continuing the
-example, let us now suppose that you wished to visit the file
address@hidden/usr/masahiko/man/vip.texinfo}. Then to the same prompt which
you get
-after you typed @kbd{v}, you can enter @samp{/usr/masahiko/man/vip.texinfo} or
address@hidden/man/vip.texinfo} followed by @key{RET}.
-
-Use @kbd{V} instead of @kbd{v}, if you wish to visit a file in another
-window.
-
-You can verify which file you are editing by typing @kbd{g}. (You can also
-type @kbd{X B} to get information on other buffers too.) If you type
address@hidden you will get an information like below in the echo area:@refill
address@hidden
-"/usr/masahiko/man/vip.texinfo" line 921 of 1949
address@hidden example
-
-After you edited the buffer (@samp{vip.texinfo}, in our example) for a while,
-you may wish to save it in a file. If you wish to save it in the file
-associated with the buffer (@file{/usr/masahiko/man/vip.texinfo}, in this
-case), you can just say @kbd{X S}. If you wish to save it in another file,
-you can type @kbd{X W}. You will then get a similar prompt as you get for
address@hidden, to which you can enter the file address@hidden
-
address@hidden Viewing the Buffer, Mark Commands, Files, Vi Commands
address@hidden Viewing the Buffer
-
-In this and next section we discuss commands for moving around in the
-buffer. These command do not change the content of the buffer. The
-following commands are useful for viewing the content of the current
-buffer.
-
address@hidden @kbd
address@hidden @key{SPC}
address@hidden C-f
address@hidden 040 @kbd{SPC} (@code{vip-scroll})
address@hidden 006 @kbd{C-f} (@code{vip-scroll-back})
-Scroll text of current window upward almost full screen. You can go
address@hidden in the buffer by this command (@code{vip-scroll}).
address@hidden @key{RET}
address@hidden C-b
address@hidden 015 @kbd{RET} (@code{vip-scroll-back})
address@hidden 002 @kbd{C-b} (@code{vip-scroll-back})
-Scroll text of current window downward almost full screen. You can go
address@hidden in the buffer by this command (@code{vip-scroll-back}).
address@hidden C-d
address@hidden 004 @kbd{C-d} (@code{vip-scroll-up})
-Scroll text of current window upward half screen. You can go
address@hidden in the buffer by this command (@code{vip-scroll-down}).
address@hidden C-u
address@hidden 025 @kbd{C-u} (@code{vip-scroll-down})
-Scroll text of current window downward half screen. You can go
address@hidden in the buffer by this command (@code{vip-scroll-up}).
address@hidden C-y
address@hidden 031 @kbd{C-y} (@code{vip-scroll-down-one})
-Scroll text of current window upward by one line (@code{vip-scroll-down-one}).
address@hidden C-e
address@hidden 005 @kbd{C-e} (@code{vip-scroll-up-one})
-Scroll text of current window downward by one line (@code{vip-scroll-up-one}).
address@hidden table
address@hidden
-You can repeat these commands by giving a count. Thus, @kbd{2 @key{SPC}}
-has the same effect as @address@hidden @key{SPC}}.
-
-The following commands reposition point in the window.
-
address@hidden @kbd
address@hidden z H
address@hidden z @key{RET}
address@hidden 1723 @kbd{z H} (@code{vip-line-to-top})
address@hidden 1721 @kbd{z RET} (@code{vip-line-to-top})
-Put point on the top (@i{home}) line in the window. So the current line
-becomes the top line in the window. Given a count @var{n}, point will be
-placed in the @var{n}-th line from top (@code{vip-line-to-top}).
address@hidden z M
address@hidden z .
address@hidden 1723 @kbd{z M} (@code{vip-line-to-middle})
address@hidden 1722 @kbd{z .} (@code{vip-line-to-middle})
-Put point on the @i{middle} line in the window. Given a count @var{n},
-point will be placed in the @var{n}-th line from the middle line
-(@code{vip-line-to-middle}).
address@hidden z L
address@hidden z -
address@hidden 1723 @kbd{z L} (@code{vip-line-to-bottom})
address@hidden 1722 @kbd{z -} (@code{vip-line-to-bottom})
-Put point on the @i{bottom} line in the window. Given a count @var{n},
-point will be placed in the @var{n}-th line from bottom
-(@code{vip-line-to-bottom}).
address@hidden C-l
-Center point in window and redisplay screen (@code{recenter}).
address@hidden table
-
address@hidden Mark Commands, Motion Commands, Viewing the Buffer, Vi Commands
address@hidden Mark Commands
-
-The following commands are used to mark positions in the buffer.
-
address@hidden @kbd
address@hidden m @var{ch}
address@hidden 155 @kbd{m} (@code{vip-mark-point})
-Store current point in the register @var{ch}. @var{ch} must be a
-lower-case @acronym{ASCII} letter.
address@hidden m <
-Set mark at the beginning of current buffer.
address@hidden m >
-Set mark at the end of current buffer.
address@hidden m .
-Set mark at point.
address@hidden m ,
-Jump to mark (and pop mark off the mark ring).
address@hidden table
-
address@hidden mark ring
-
-Emacs uses the @dfn{mark ring} to store marked positions. The commands
address@hidden <}, @kbd{m >} and @kbd{m .}@: not only set mark but also add it
as the
-latest element of the mark ring (replacing the oldest one). By repeating
-the command address@hidden ,}' you can visit older and older marked positions.
You
-will eventually be in a loop as the mark ring is a ring.
-
address@hidden Motion Commands, Searching and Replacing, Mark Commands, Vi
Commands
address@hidden Motion Commands
-
-Commands for moving around in the current buffer are collected here. These
-commands are used as an `argument' for the delete, change and yank commands
-to be described in the next section.
-
address@hidden @kbd
address@hidden h
address@hidden 150 @kbd{h} (@code{vip-backward-char})
-Move point backward by one character. Signal error if point is at the
-beginning of buffer, but (unlike Vi) do not complain otherwise
-(@code{vip-backward-char}).
address@hidden l
address@hidden 154 @kbd{l} (@code{vip-forward-char})
-Move point backward by one character. Signal error if point is at the
-end of buffer, but (unlike Vi) do not complain otherwise
-(@code{vip-forward-char}).
address@hidden j
address@hidden 152 @kbd{j} (@code{vip-next-line})
-Move point to the next line keeping the current column. If point is on the
-last line of the buffer, a new line will be created and point will move to
-that line (@code{vip-next-line}).
address@hidden k
address@hidden 153 @kbd{k} (@code{vip-previous-line})
-Move point to the previous line keeping the current column
-(@code{vip-next-line}).
address@hidden +
address@hidden 053 @kbd{+} (@code{vip-next-line-at-bol})
-Move point to the next line at the first non-white character. If point is
-on the last line of the buffer, a new line will be created and point will
-move to the beginning of that line (@code{vip-next-line-at-bol}).
address@hidden -
address@hidden 055 @kbd{-} (@code{vip-previous-line-at-bol})
-Move point to the previous line at the first non-white character
-(@code{vip-previous-line-at-bol}).
address@hidden table
address@hidden
-If a count is given to these commands, the commands will be repeated that
-many times.
-
address@hidden @kbd
address@hidden 0
address@hidden 060 @kbd{0} (@code{vip-beginning-of-line})
-Move point to the beginning of line (@code{vip-beginning-of-line}).
address@hidden ^
address@hidden 136 @kbd{^} (@code{vip-bol-and-skip-white})
-Move point to the first non-white character on the line
-(@code{vip-bol-and-skip-white}).
address@hidden $
address@hidden 044 @kbd{$} (@code{vip-goto-eol})
-Move point to the end of line (@code{vip-goto-eol}).
address@hidden @var{n} |
address@hidden 174 @kbd{|} (@code{vip-goto-col})
-Move point to the @var{n}-th column on the line (@code{vip-goto-col}).
address@hidden table
address@hidden
-Except for the @kbd{|} command, these commands neglect a count.
-
address@hidden word
-
address@hidden @kbd
address@hidden w
address@hidden 167 @kbd{w} (@code{vip-forward-word})
-Move point forward to the beginning of the next word
-(@code{vip-forward-word}).
address@hidden W
address@hidden 127 @kbd{W} (@code{vip-forward-Word})
-Move point forward to the beginning of the next word, where a @dfn{word} is
-considered as a sequence of non-white characters (@code{vip-forward-Word}).
address@hidden b
address@hidden 142 @kbd{b} (@code{vip-backward-word})
-Move point backward to the beginning of a word (@code{vip-backward-word}).
address@hidden B
address@hidden 102 @kbd{B} (@code{vip-backward-Word})
-Move point backward to the beginning of a word, where a @i{word} is
-considered as a sequence of non-white characters (@code{vip-forward-Word}).
address@hidden e
address@hidden 145 @kbd{e} (@code{vip-end-of-word})
-Move point forward to the end of a word (@code{vip-end-of-word}).
address@hidden E
address@hidden 105 @kbd{E} (@code{vip-end-of-Word})
-Move point forward to the end of a word, where a @i{word} is
-considered as a sequence of non-white characters (@code{vip-end-of-Word}).
address@hidden table
address@hidden
address@hidden syntax table
-Here the meaning of the word `word' for the @kbd{w}, @kbd{b} and @kbd{e}
-commands is determined by the @dfn{syntax table} effective in the current
-buffer. Each major mode has its syntax mode, and therefore the meaning of
-a word also changes as the major mode changes. See GNU Emacs Manual for
-details of syntax table.
-
address@hidden @kbd
address@hidden H
address@hidden 110 @kbd{H} (@code{vip-window-top})
-Move point to the beginning of the @i{home} (top) line of the window.
-Given a count @var{n}, go to the @var{n}-th line from top
-(@code{vip-window-top}).
address@hidden M
address@hidden 115 @kbd{M} (@code{vip-window-middle})
-Move point to the beginning of the @i{middle} line of the window. Given
-a count @var{n}, go to the @var{n}-th line from the middle line
-(@code{vip-window-middle}).
address@hidden L
address@hidden 114 @kbd{L} (@code{vip-window-bottom})
-Move point to the beginning of the @i{lowest} (bottom) line of the
-window. Given count, go to the @var{n}-th line from bottom
-(@code{vip-window-bottom}).
address@hidden table
address@hidden
-These commands can be used to go to the desired line visible on the screen.
-
address@hidden @kbd
address@hidden (
address@hidden 050 @kbd{(} (@code{vip-backward-sentence})
-Move point backward to the beginning of the sentence
-(@code{vip-backward-sentence}).
address@hidden )
address@hidden 051 @kbd{)} (@code{vip-forward-sentence})
-Move point forward to the end of the sentence
-(@code{vip-forward-sentence}).
address@hidden @{
address@hidden 173 @address@hidden (@code{vip-backward-paragraph})
-Move point backward to the beginning of the paragraph
-(@code{vip-backward-paragraph}).
address@hidden @}
address@hidden 175 @address@hidden (@code{vip-forward-paragraph})
-Move point forward to the end of the paragraph
-(@code{vip-forward-paragraph}).
address@hidden table
address@hidden
-A count repeats the effect for these commands.
-
address@hidden @kbd
address@hidden G
address@hidden 107 @kbd{G} (@code{vip-goto-line})
-Given a count @var{n}, move point to the @var{n}-th line in the buffer on
-the first non-white character. Without a count, go to the end of the buffer
-(@code{vip-goto-line}).
address@hidden ` `
address@hidden 140 @kbd{`} (@code{vip-goto-mark})
-Exchange point and mark (@code{vip-goto-mark}).
address@hidden ` @var{ch}
-Move point to the position stored in the register @var{ch}. @var{ch} must
-be a lower-case letter.
address@hidden ' '
address@hidden 047 @kbd{'} (@code{vip-goto-mark-and-skip-white})
-Exchange point and mark, and then move point to the first non-white
-character on the line (@code{vip-goto-mark-and-skip-white}).
address@hidden ' @var{ch}
-Move point to the position stored in the register @var{ch} and skip to the
-first non-white character on the line. @var{ch} must be a lower-case letter.
address@hidden %
address@hidden 045 @kbd{%} (@code{vip-paren-match})
-Move point to the matching parenthesis if point is looking at @kbd{(},
address@hidden)}, @address@hidden, @address@hidden, @kbd{[} or @kbd{]}
address@hidden(@code{vip-paren-match}).
address@hidden table
address@hidden
-The command @kbd{G} mark point before move, so that you can return to the
-original point by @kbd{` `}. The original point will also be stored in
-the mark ring.
-
-The following commands are useful for moving points on the line. A count
-will repeat the effect.
-
address@hidden @kbd
address@hidden f @var{ch}
address@hidden 146 @kbd{f} (@code{vip-find-char-forward})
-Move point forward to the character @var{ch} on the line. Signal error if
address@hidden could not be found (@code{vip-find-char-forward}).
address@hidden F @var{ch}
address@hidden 106 @kbd{F} (@code{vip-find-char-backward})
-Move point backward to the character @var{ch} on the line. Signal error if
address@hidden could not be found (@code{vip-find-char-backward}).
address@hidden t @var{ch}
address@hidden 164 @kbd{t} (@code{vip-goto-char-forward})
-Move point forward upto the character @var{ch} on the line. Signal error if
address@hidden could not be found (@code{vip-goto-char-forward}).
address@hidden T @var{ch}
address@hidden 124 @kbd{T} (@code{vip-goto-char-backward})
-Move point backward upto the character @var{ch} on the line. Signal error if
address@hidden could not be found (@code{vip-goto-char-backward}).
address@hidden ;
address@hidden 073 @kbd{;} (@code{vip-repeat-find})
-Repeat previous @kbd{f}, @kbd{t}, @kbd{F} or @kbd{T} command
-(@code{vip-repeat-find}).
address@hidden ,
address@hidden 054 @kbd{,} (@code{vip-repeat-find-opposite})
-Repeat previous @kbd{f}, @kbd{t}, @kbd{F} or @kbd{T} command, in the
-opposite direction (@code{vip-repeat-find-opposite}).
address@hidden table
-
address@hidden Searching and Replacing, Modifying Commands, Motion Commands, Vi
Commands
address@hidden Searching and Replacing
-
-Following commands are available for searching and replacing.
-
address@hidden regular expression (search)
-
address@hidden @kbd
address@hidden / @var{string} @key{RET}
address@hidden 057 @kbd{/} (@code{vip-search-forward})
-Search the first occurrence of the string @var{string} forward starting
-from point. Given a count @var{n}, the @var{n}-th occurrence of
address@hidden will be searched. If the variable @code{vip-re-search} has value
address@hidden then @dfn{regular expression} search is done and the string
-matching the regular expression @var{string} is found. If you give an
-empty string as @var{string} then the search mode will change from vanilla
-search to regular expression search and vice versa
-(@code{vip-search-forward}).
address@hidden ? @var{string} @key{RET}
address@hidden 077 @kbd{?} (@code{vip-search-backward})
-Same as @kbd{/}, except that search is done backward
-(@code{vip-search-backward}).
address@hidden n
address@hidden 156 @kbd{n} (@code{vip-search-next})
-Search the previous search pattern in the same direction as before
-(@code{vip-search-next}).
address@hidden N
address@hidden 116 @kbd{N} (@code{vip-search-Next})
-Search the previous search pattern in the opposite direction
-(@code{vip-search-Next}).
address@hidden C-s
address@hidden 023 @kbd{C-s} (@code{isearch-forward})
-Search forward incrementally. See GNU Emacs Manual for details
-(@code{isearch-forward}).
address@hidden C-r
address@hidden 022 @kbd{C-r} (@code{isearch-backward})
-Search backward incrementally (@code{isearch-backward}).
address@hidden vanilla (replacement)
address@hidden regular expression (replacement)
address@hidden R @var{string} RET @var{newstring}
address@hidden 122 @kbd{R} (@code{vip-replace-string})
-There are two modes of replacement, @dfn{vanilla} and @dfn{regular expression}.
-If the mode is @i{vanilla} you will get a prompt @samp{Replace string:},
-and if the mode is @i{regular expression} you will ge a prompt
address@hidden regexp:}. The mode is initially @i{vanilla}, but you can
-toggle these modes by giving a null string as @var{string}. If the mode is
-vanilla, this command replaces every occurrence of @var{string} with
address@hidden If the mode is regular expression, @var{string} is
-treated as a regular expression and every string matching the regular
-expression is replaced with @var{newstring} (@code{vip-replace-string}).
address@hidden Q @var{string} RET @var{newstring}
address@hidden 121 @kbd{Q} (@code{vip-query-replace})
-Same as @kbd{R} except that you will be asked form confirmation before each
-replacement
address@hidden(@code{vip-query-replace}).
address@hidden r @var{ch}
address@hidden 162 @kbd{r} (@code{vip-replace-char})
-Replace the character point is looking at by the character @var{ch}. Give
-count, replace that many characters by @var{ch} (@code{vip-replace-char}).
address@hidden table
address@hidden
-The commands @kbd{/} and @kbd{?} mark point before move, so that you can
-return to the original point by @address@hidden `}}.
-
address@hidden Modifying Commands, Delete Commands, Searching and Replacing, Vi
Commands
address@hidden Modifying Commands
-
-In this section, commands for modifying the content of a buffer are
-described. These commands affect the region determined by a motion command
-which is given to the commands as their argument.
-
address@hidden point commands
address@hidden line commands
-
-We classify motion commands into @dfn{point commands} and
address@hidden commands}. The point commands are as follows:
address@hidden
address@hidden, @kbd{l}, @kbd{0}, @kbd{^}, @kbd{$}, @kbd{w}, @kbd{W}, @kbd{b},
@kbd{B}, @kbd{e}, @kbd{E}, @kbd{(}, @kbd{)}, @kbd{/}, @kbd{?}, @kbd{`},
@kbd{f}, @kbd{F}, @kbd{t}, @kbd{T}, @kbd{%}, @kbd{;}, @kbd{,}
address@hidden example
address@hidden
-The line commands are as follows:
address@hidden
address@hidden, @kbd{k}, @kbd{+}, @kbd{-}, @kbd{H}, @kbd{M}, @kbd{L},
@address@hidden, @address@hidden, @kbd{G}, @kbd{'}
address@hidden example
address@hidden
address@hidden expanding (region)
-If a point command is given as an argument to a modifying command, the
-region determined by the point command will be affected by the modifying
-command. On the other hand, if a line command is given as an argument to a
-modifying command, the region determined by the line command will be
-enlarged so that it will become the smallest region properly containing the
-region and consisting of whole lines (we call this process @dfn{expanding
-the region}), and then the enlarged region will be affected by the modifying
-command.
-
address@hidden
-* Delete Commands:: Commands for deleting text.
-* Yank Commands:: Commands for yanking text in Vi's sense.
-* Put Back Commands:: Commands for putting back deleted/yanked text.
-* Change Commands:: Commands for changing text.
-* Repeating and Undoing Modifications::
address@hidden menu
address@hidden Delete Commands, Yank Commands, Modifying Commands, Modifying
Commands
address@hidden Delete Commands
-
address@hidden @kbd
address@hidden d @var{motion-command}
address@hidden 1440 @kbd{d} (@code{vip-command-argument})
-Delete the region determined by the motion command @var{motion-command}.
address@hidden table
address@hidden
-For example, @kbd{d $} will delete the region between point and end of
-current line since @kbd{$} is a point command that moves point to end of line.
address@hidden G} will delete the region between the beginning of current line
and
-end of the buffer, since @kbd{G} is a line command. A count given to the
-command above will become the count for the associated motion command.
-Thus, @kbd{3 d w} will delete three words.
-
address@hidden 042 @kbd{"} (@code{vip-command-argument})
-It is also possible to save the deleted text into a register you specify.
-For example, you can say @kbd{" t 3 d w} to delete three words and save it
-to register @kbd{t}. The name of a register is a lower-case letter between
address@hidden and @kbd{z}. If you give an upper-case letter as an argument to
-a delete command, then the deleted text will be appended to the content of
-the register having the corresponding lower-case letter as its name. So,
address@hidden" T d w} will delete a word and append it to register @kbd{t}.
Other
-modifying commands also accept a register name as their argument, and we
-will not repeat similar explanations.
-
-We have more delete commands as below.
-
address@hidden @kbd
address@hidden d d
address@hidden 1442 @kbd{d d}
-Delete a line. Given a count @var{n}, delete @var{n} lines.
address@hidden d r
address@hidden 1442 @kbd{d r}
-Delete current region.
address@hidden d R
address@hidden 1441 @kbd{d R}
-Expand current region and delete it.
address@hidden D
address@hidden 104 @kbd{D} (@code{vip-kill-line})
-Delete to the end of a line (@code{vip-kill-line}).
address@hidden x
address@hidden 170 @kbd{x} (@code{vip-delete-char})
-Delete a character after point. Given @var{n}, delete @var{n} characters
-(@code{vip-delete-char}).
address@hidden @key{DEL}
address@hidden 177 @kbd{DEL} (@code{vip-delete-backward-char})
-Delete a character before point. Given @var{n}, delete @var{n} characters
-(@code{vip-delete-backward-char}).
address@hidden table
-
address@hidden Yank Commands, Put Back Commands, Delete Commands, Modifying
Commands
address@hidden Yank Commands
-
address@hidden yank
-
-Yank commands @dfn{yank} a text of buffer into a (usually anonymous) register.
-Here the word `yank' is used in Vi's sense. Thus yank commands do not
-alter the content of the buffer, and useful only in combination with
-commands that put back the yanked text into the buffer.
-
address@hidden @kbd
address@hidden y @var{motion-command}
address@hidden 1710 @kbd{y} (@code{vip-command-argument})
-Yank the region determined by the motion command @var{motion-command}.
address@hidden table
address@hidden
-For example, @kbd{y $} will yank the text between point and the end of line
-into an anonymous register, while @kbd{"c y $} will yank the same text into
-register @kbd{c}.
-
-Use the following command to yank consecutive lines of text.
-
address@hidden @kbd
address@hidden y y
address@hidden Y
address@hidden 131 @kbd{Y} (@code{vip-yank-line})
address@hidden 1712 @kbd{y y} (@code{vip-yank-line})
-Yank a line. Given @var{n}, yank @var{n} lines (@code{vip-yank-line}).
address@hidden y r
address@hidden 1712 @kbd{y r}
-Yank current region.
address@hidden y R
address@hidden 1711 @kbd{y R}
-Expand current region and yank it.
address@hidden table
-
address@hidden Put Back Commands, Change Commands, Yank Commands, Modifying
Commands
address@hidden Put Back Commands
-Deleted or yanked texts can be put back into the buffer by the command
-below.
-
address@hidden @kbd
address@hidden p
address@hidden 160 @kbd{p} (@code{vip-put-back})
-Insert, after the character point is looking at, most recently
-deleted/yanked text from anonymous register. Given a register name
-argument, the content of the named register will be put back. Given a
-count, the command will be repeated that many times. This command also
-checks if the text to put back ends with a new line character, and if so
-the text will be put below the current line (@code{vip-put-back}).
address@hidden P
address@hidden 120 @kbd{P} (@code{vip-Put-back})
-Insert at point most recently deleted/yanked text from anonymous register.
-Given a register name argument, the content of the named register will
-be put back. Given a count, the command will be repeated that many times.
-This command also checks if the text to put back ends with a new line
-character, and if so the text will be put above the current line rather
-than at point (@code{vip-Put-back}).
address@hidden table
address@hidden
address@hidden number register
-Thus, @kbd{" c p} will put back the content of the register @kbd{c} into the
-buffer. It is also possible to specify @dfn{number register} which is a
-numeral between @kbd{1} and @kbd{9}. If the number register @var{n} is
-specified, @var{n}-th previously deleted/yanked text will be put back. It
-is an error to specify a number register for the delete/yank commands.
-
address@hidden Change Commands, Repeating and Undoing Modifications, Put Back
Commands, Modifying Commands
address@hidden Change Commands
-
-Most commonly used change command takes the following form.
-
address@hidden @kbd
address@hidden c @var{motion-command}
address@hidden 1430 @kbd{c} (@code{vip-command-argument})
-Replace the content of the region determined by the motion command
address@hidden by the text you type. If the motion command is a
-point command then you will type the text into minibuffer, and if the
-motion command is a line command then the region will be deleted first and
-you can insert the text in @var{insert mode}.
address@hidden table
address@hidden
-For example, if point is at the beginning of a word @samp{foo} and you
-wish to change it to @samp{bar}, you can type @kbd{c w}. Then, as @kbd{w}
-is a point command, you will get the prompt @samp{foo =>} in the
-minibuffer, for which you can type @kbd{b a r @key{RET}} to complete the change
address@hidden
-
address@hidden @kbd
address@hidden c c
address@hidden 1432 @kbd{c c}
-Change a line. Given a count, that many lines are changed.
address@hidden c r
address@hidden 1432 @kbd{c r}
-Change current region.
address@hidden c R
address@hidden 1431 @kbd{c R}
-Expand current region and change it.
address@hidden table
-
address@hidden Repeating and Undoing Modifications, Other Vi Commands, Change
Commands, Modifying Commands
address@hidden Repeating and Undoing Modifications
-
-VIP records the previous modifying command, so that it is easy to repeat
-it. It is also very easy to undo changes made by modifying commands.
-
address@hidden @kbd
address@hidden u
address@hidden 165 @kbd{u} (@code{vip-undo})
-Undo the last change. You can undo more by repeating undo by the repeat
-command @samp{.}. For example, you can undo 5 previous changes by typing
address@hidden If you type @samp{uu}, then the second @samp{u} undoes the
-first undo command (@code{vip-undo}).
address@hidden .
address@hidden 056 @kbd{.} (@code{vip-repeat})
-Repeat the last modifying command. Given count @var{n} it becomes the new
-count for the repeated command. Otherwise, the count for the last
-modifying command is used again (@code{vip-repeat}).
address@hidden table
-
address@hidden Other Vi Commands, Commands in Insert Mode, Repeating and
Undoing Modifications, Vi Commands
address@hidden Other Vi Commands
-
-Miscellaneous Vi commands are collected here.
-
address@hidden @kbd
address@hidden Z Z
address@hidden 132 @kbd{Z Z} (@code{save-buffers-kill-emacs})
-Exit Emacs. If modified buffers exist, you will be asked whether you wish
-to save them or not (@code{save-buffers-kill-emacs}).
address@hidden !@: @var{motion-command} @var{format-command}
address@hidden @var{n} !@: !@: @var{format-command}
address@hidden 041 @kbd{!} (@code{vip-command-argument})
-The region determined by the motion command @var{motion-command} will be
-given to the shell command @var{format-command} and the region will be
-replaced by its output. If a count is given, it will be passed to
address@hidden For example, @samp{3!Gsort} will sort the region
-between point and the 3rd line. If @kbd{!} is used instead of
address@hidden then @var{n} lines will be processed by
address@hidden (@code{vip-command-argument}).
address@hidden J
address@hidden 112 @kbd{J} (@code{vip-join-lines})
-Join two lines. Given count, join that many lines. A space will be
-inserted at each junction (@code{vip-join-lines}).
address@hidden < @var{motion-command}
address@hidden @var{n} < <
address@hidden 074 @kbd{<} (@code{vip-command-argument})
-Shift region determined by the motion command @var{motion-command} to
-left by @var{shift-width} (default is 8). If @kbd{<} is used instead of
address@hidden then shift @var{n} lines
address@hidden(@code{vip-command-argument}).
address@hidden > @var{motion-command}
address@hidden @var{n} > >
address@hidden 076 @kbd{>} (@code{vip-command-argument})
-Shift region determined by the motion command @var{motion-command} to
-right by @var{shift-width} (default is 8). If @kbd{<} is used instead of
address@hidden then shift @var{n} lines
address@hidden(@code{vip-command-argument}).
address@hidden = @var{motion-command}
address@hidden 075 @kbd{=} (@code{vip-command-argument})
-Indent region determined by the motion command @var{motion-command}. If
address@hidden is used instead of @var{motion-command} then indent @var{n} lines
-(@code{vip-command-argument}).
address@hidden *
address@hidden 052 @kbd{*} (@code{vip-call-last-kbd-macro})
-Call last remembered keyboard macro.
address@hidden #
-A new vi operator. @xref{New Commands}, for more details.
address@hidden table
-
-The following keys are reserved for future extensions, and currently
-assigned to a function that just beeps (@code{vip-nil}).
-
address@hidden 046 @kbd{&} (@code{vip-nil})
address@hidden 100 @kbd{@@} (@code{vip-nil})
address@hidden 125 @kbd{U} (@code{vip-nil})
address@hidden 133 @kbd{[} (@code{vip-nil})
address@hidden 135 @kbd{]} (@code{vip-nil})
address@hidden 137 @kbd{_} (@code{vip-nil})
address@hidden 161 @kbd{q} (@code{vip-nil})
address@hidden 176 @kbd{~} (@code{vip-nil})
-
address@hidden
-&, @@, U, [, ], _, q, ~
address@hidden example
-
-VIP uses a special local keymap to interpret key strokes you enter in vi
-mode. The following keys are bound to @var{nil} in the keymap. Therefore,
-these keys are interpreted by the global keymap of Emacs. We give below a
-short description of the functions bound to these keys in the global
-keymap. See GNU Emacs Manual for details.
-
address@hidden @kbd
address@hidden C-@@
address@hidden 000 @kbd{C-@@} (@code{set-mark-command})
-Set mark and push previous mark on mark ring (@code{set-mark-command}).
address@hidden TAB
address@hidden 011 TAB (@code{indent-for-tab-command})
-Indent line for current major mode (@code{indent-for-tab-command}).
address@hidden C-j
address@hidden 012 @kbd{C-j} (@code{newline-and-indent})
-Insert a newline, then indent according to mode (@code{newline-and-indent}).
address@hidden C-k
address@hidden 013 @kbd{C-k} (@code{kill-line})
-Kill the rest of the current line; before a newline, kill the newline.
-With a numeric argument, kill that many lines from point. Negative arguments
-kill lines backward (@code{kill-line}).
address@hidden C-l
address@hidden 014 @kbd{C-l} (@code{recenter})
-Clear the screen and reprint everything (@code{recenter}).
address@hidden @var{n} C-p
address@hidden 020 @kbd{C-p} (@code{previous-line})
-Move cursor vertically up @var{n} lines (@code{previous-line}).
address@hidden C-q
address@hidden 021 @kbd{C-q} (@code{quoted-insert})
-Read next input character and insert it. Useful for inserting control
-characters
address@hidden(@code{quoted-insert}).
address@hidden C-r
address@hidden 022 @kbd{C-r} (@code{isearch-backward})
-Search backward incrementally (@code{isearch-backward}).
address@hidden C-s
address@hidden 023 @kbd{C-s} (@code{isearch-forward})
-Search forward incrementally (@code{isearch-forward}).
address@hidden @var{n} C-t
address@hidden 024 @kbd{C-t} (@code{transpose-chars})
-Interchange characters around point, moving forward one character. With
-count @var{n}, take character before point and drag it forward past @var{n}
-other characters. If no argument and at end of line, the previous two
-characters are exchanged (@code{transpose-chars}).
address@hidden @var{n} C-v
address@hidden 026 @kbd{C-v} (@code{scroll-up})
-Scroll text upward @var{n} lines. If @var{n} is not given, scroll near
-full screen (@code{scroll-up}).
address@hidden C-w
address@hidden 027 @kbd{C-w} (@code{kill-region})
-Kill between point and mark. The text is save in the kill ring. The
-command @kbd{P} or @kbd{p} can retrieve it from kill ring
-(@code{kill-region}).
address@hidden table
-
address@hidden Commands in Insert Mode, Ex Commands, Other Vi Commands, Vi
Commands
address@hidden Insert Mode
-
-You can enter insert mode by one of the following commands. In addition to
-these, you will enter insert mode if you give a change command with a line
-command as the motion command. Insert commands are also modifying commands
-and you can repeat them by the repeat command @kbd{.} (@code{vip-repeat}).
-
address@hidden @kbd
address@hidden i
address@hidden 151 @kbd{i} (@code{vip-insert})
-Enter insert mode at point (@code{vip-insert}).
address@hidden I
address@hidden 111 @kbd{I} (@code{vip-Insert})
-Enter insert mode at the first non white character on the line
-(@code{vip-Insert}).
address@hidden a
address@hidden 141 @kbd{a} (@code{vip-append})
-Move point forward by one character and then enter insert mode
-(@code{vip-append}).
address@hidden A
address@hidden 101 @kbd{A} (@code{vip-Append})
-Enter insert mode at end of line (@code{vip-Append}).
address@hidden o
address@hidden 157 @kbd{o} (@code{vip-open-line})
-Open a new line below the current line and enter insert mode
-(@code{vip-open-line}).
address@hidden O
address@hidden 117 @kbd{O} (@code{vip-Open-line})
-Open a new line above the current line and enter insert mode
-(@code{vip-Open-line}).
address@hidden C-o
address@hidden 017 @kbd{C-o} (@code{vip-open-line-at-point})
-Insert a newline and leave point before it, and then enter insert mode
address@hidden(@code{vip-open-line-at-point}).
address@hidden table
-
-Insert mode is almost like emacs mode. Only the following 4 keys behave
-differently from emacs mode.
-
address@hidden @kbd
address@hidden @key{ESC}
address@hidden 033 @kbd{ESC} (@code{vip-change-mode-to-vi}) (insert mode)
-This key will take you back to vi mode (@code{vip-change-mode-to-vi}).
address@hidden C-h
address@hidden 010 @kbd{C-h} (@code{delete-backward-char}) (insert mode)
-Delete previous character (@code{delete-backward-char}).
address@hidden C-w
address@hidden 027 @kbd{C-w} (@code{vip-delete-backward-word}) (insert mode)
-Delete previous word (@code{vip-delete-backward-word}).
address@hidden C-z
address@hidden 032 @kbd{C-z} (@code{vip-ESC}) (insert mode)
-This key simulates @key{ESC} key in emacs mode. For instance, typing
address@hidden x} in insert mode is the same as typing @kbd{ESC x} in emacs mode
-(@code{vip-ESC}).
address@hidden table
address@hidden
-You can also bind @kbd{C-h} to @code{help-command} if you like.
-(@xref{Customizing Key Bindings}, for details.) Binding @kbd{C-h} to
address@hidden has the effect of making the meaning of @kbd{C-h}
-uniform among emacs, vi and insert modes.
-
-When you enter insert mode, VIP records point as the start point of
-insertion, and when you leave insert mode the region between point and
-start point is saved for later use by repeat command etc. Therefore, repeat
-command will not really repeat insertion if you move point by emacs
-commands while in insert mode.
-
address@hidden Ex Commands, Ex Command Reference, Commands in Insert Mode, Top
address@hidden Ex Commands
-
address@hidden 072 @kbd{:} (@code{vip-ex})
-
-In vi mode, you can execute an Ex command @var{ex-command} by typing:
address@hidden
address@hidden:@: @var{ex-command} @key{RET}}
address@hidden example
-Every Ex command follows the following pattern:
address@hidden
address@hidden command} @kbd{!}@: @var{parameters count flags}
address@hidden example
address@hidden
address@hidden address
-where all parts are optional. For the syntax of @dfn{address}, the reader
-is referred to the reference manual of Ex.
-
address@hidden magic
address@hidden regular expression
-
-In the current version of VIP, searching by Ex commands is always
address@hidden That is, search patterns are always treated as @dfn{regular
-expressions}. For example, a typical forward search would be invoked by
address@hidden:/@var{pat}/}. If you wish to include @samp{/} as part of
address@hidden you must preceded it by @samp{\}. VIP strips off these @kbd{\}'s
-before @kbd{/} and the resulting @var{pat} becomes the actual search
-pattern. Emacs provides a different and richer class or regular
-expressions than Vi/Ex, and VIP uses Emacs' regular expressions. See GNU
-Emacs Manual for details of regular expressions.
-
-Several Ex commands can be entered in a line by separating them by a pipe
-character @samp{|}.
-
address@hidden
-* Ex Command Reference:: Explain all the Ex commands available in VIP.
address@hidden menu
address@hidden Ex Command Reference, Customization, Ex Commands, Ex Commands
address@hidden Ex Command Reference
-In this section we briefly explain all the Ex commands supported by VIP.
-Most Ex commands expect @var{address} as their argument, and they use
-default addresses if they are not explicitly given. In the following, such
-default addresses will be shown in parentheses.
-
-Most command names can and preferably be given in abbreviated forms. In
-the following, optional parts of command names will be enclosed in
-brackets. For example, @samp{co[py]} will mean that copy command can be
-give as @samp{co} or @samp{cop} or @samp{copy}.
-
-If @var{command} is empty, point will move to the beginning of the line
-specified by the @var{address}. If @var{address} is also empty, point will
-move to the beginning of the current line.
-
address@hidden flag
-
-Some commands accept @dfn{flags} which are one of @kbd{p}, @kbd{l} and
address@hidden If @var{flags} are given, the text affected by the commands will
-be displayed on a temporary window, and you will be asked to hit return to
-continue. In this way, you can see the text affected by the commands
-before the commands will be executed. If you hit @kbd{C-g} instead of
address@hidden then the commands will be aborted. Note that the meaning of
address@hidden is different in VIP from that in Vi/Ex.
-
address@hidden @kbd
address@hidden (.,.@:) co[py] @var{addr} @var{flags}
address@hidden (.,.@:) t @var{addr} @var{flags}
-Place a copy of specified lines after @var{addr}. If @var{addr} is
address@hidden, it will be placed before the first line.
address@hidden (.,.@:) d[elete] @var{register} @var{count} @var{flags}
-Delete specified lines. Text will be saved in a named @var{register} if a
-lower-case letter is given, and appended to a register if a capital letter is
-given.
address@hidden e[dit] !@: address@hidden @var{file}
address@hidden e[x] !@: address@hidden @var{file}
address@hidden vi[sual] !@: address@hidden @var{file}
-Edit a new file @var{file} in the current window. The command will abort
-if current buffer is modified, which you can override by giving @kbd{!}.
-If @address@hidden is given, @var{addr} becomes the current line.
address@hidden file
-Give information about the current file.
address@hidden (1,$) g[lobal] !@: /@var{pat}/ @var{cmds}
address@hidden (1,$) v /@var{pat}/ @var{cmds}
-Among specified lines first mark each line which matches the regular
-expression @var{pat}, and then execute @var{cmds} on each marked line.
-If @kbd{!}@: is given, @var{cmds} will be executed on each line not matching
address@hidden @kbd{v} is same as @kbd{g!}.
address@hidden (.,.+1) j[oin] !@: @var{count} @var{flags}
-Join specified lines into a line. Without @kbd{!}, a space character will
-be inserted at each junction.
address@hidden (.@:) k @var{ch}
address@hidden (.@:) mar[k] @var{ch}
-Mark specified line by a lower-case character @var{ch}. Then the
-addressing form @kbd{'address@hidden will refer to this line. No white space
is
-required between @kbd{k} and @var{ch}. A white space is necessary between
address@hidden and @var{ch}, however.
address@hidden map @var{ch} @var{rhs}
-Define a macro for vi mode. After this command, the character @var{ch}
-will be expanded to @var{rhs} in vi mode.
address@hidden (.,.@:) m[ove] @var{addr}
-Move specified lines after @var{addr}.
address@hidden (.@:) pu[t] @var{register}
-Put back previously deleted or yanked text. If @var{register} is given,
-the text saved in the register will be put back; otherwise, last deleted or
-yanked text will be put back.
address@hidden q[uit] !
-Quit from Emacs. If modified buffers with associated files exist, you will
-be asked whether you wish to save each of them. At this point, you may
-choose not to quit, by hitting @kbd{C-g}. If @kbd{!}@: is given, exit from
-Emacs without saving modified buffers.
address@hidden (.@:) r[ead] @var{file}
-Read in the content of the file @var{file} after the specified line.
address@hidden (.@:) r[ead] !@: @var{command}
-Read in the output of the shell command @var{command} after the specified
-line.
address@hidden se[t]
-Set a variable's value. @xref{Customizing Constants}, for the list of
variables
-you can set.
address@hidden sh[ell]
-Run a subshell in a window.
address@hidden (.,.@:) s[ubstitute] /@var{pat}/@var{repl}/ @var{options}
@var{count} @var{flags}
address@hidden (.,.@:) & @var{options} @var{count} @var{flags}
-On each specified line, the first occurrence of string matching regular
-expression @var{pat} is replaced by replacement pattern @var{repl}. Option
-characters are @kbd{g} and @kbd{c}. If global option character @kbd{g}
-appears as part of @var{options}, all occurrences are substituted. If
-confirm option character @kbd{c} appears, you will be asked to give
-confirmation before each substitution. If @kbd{/@var{pat}/@var{repl}/} is
-missing, the last substitution is repeated.
address@hidden st[op]
-Suspend Emacs.
address@hidden ta[g] @var{tag}
address@hidden tag
address@hidden selected tags table
-Find first definition of @var{tag}. If no @var{tag} is given, previously
-given @var{tag} is used and next alternate definition is find. By default,
-the file @file{TAGS} in the current directory becomes the @dfn{selected tags
-table}. You can select another tags table by @kbd{set} command.
address@hidden Constants}, for details.
address@hidden und[o]
-Undo the last change.
address@hidden unm[ap] @var{ch}
-The macro expansion associated with @var{ch} is removed.
address@hidden ve[rsion]
-Tell the version number of VIP.
address@hidden (1,$) w[rite] !@: @var{file}
-Write out specified lines into file @var{file}. If no @var{file} is given,
-text will be written to the file associated to the current buffer. Unless
address@hidden@: is given, if @var{file} is different from the file associated
to
-the current buffer and if the file @var{file} exists, the command will not
-be executed. Unlike Ex, @var{file} becomes the file associated to the
-current buffer.
address@hidden (1,$) w[rite]>> @var{file}
-Write out specified lines at the end of file @var{file}. @var{file}
-becomes the file associated to the current buffer.
address@hidden (1,$) wq !@: @var{file}
-Same as @kbd{write} and then @kbd{quit}. If @kbd{!}@: is given, same as
address@hidden !}@: then @kbd{quit}.
address@hidden (.,.) y[ank] @var{register} @var{count}
-Save specified lines into register @var{register}. If no register is
-specified, text will be saved in an anonymous register.
address@hidden @var{addr} !@: @var{command}
-Execute shell command @var{command}. The output will be shown in a new
-window. If @var{addr} is given, specified lines will be used as standard
-input to @var{command}.
address@hidden ($) =
-Print the line number of the addressed line.
address@hidden (.,.) > @var{count} @var{flags}
-Shift specified lines to the right. The variable @code{vip-shift-width}
-(default value is 8) determines the amount of shift.
address@hidden (.,.) < @var{count} @var{flags}
-Shift specified lines to the left. The variable @code{vip-shift-width}
-(default value is 8) determines the amount of shift.
address@hidden (.,.@:) ~ @var{options} @var{count} @var{flags}
-Repeat the previous @kbd{substitute} command using previous search pattern
-as @var{pat} for matching.
address@hidden table
-
-The following Ex commands are available in Vi, but not implemented in VIP.
address@hidden
address@hidden, @kbd{list}, @kbd{next}, @kbd{print}, @kbd{preserve},
@kbd{recover}, @kbd{rewind}, @kbd{source},
address@hidden, @kbd{xit}, @kbd{z}
address@hidden example
-
address@hidden Customization, Customizing Constants, Ex Command Reference, Top
address@hidden Customization
-
-If you have a file called @file{.vip} in your home directory, then it
-will also be loaded when VIP is loaded. This file is thus useful for
-customizing VIP.
-
address@hidden
-* Customizing Constants:: How to change values of constants.
-* Customizing Key Bindings:: How to change key bindings.
address@hidden menu
-
address@hidden Customizing Constants, Customizing Key Bindings, Customization,
Customization
address@hidden Customizing Constants
-An easy way to customize VIP is to change the values of constants used
-in VIP. Here is the list of the constants used in VIP and their default
-values.
-
address@hidden @code
address@hidden vip-shift-width 8
-The number of columns shifted by @kbd{>} and @kbd{<} command.
address@hidden vip-re-replace nil
-If @code{t} then do regexp replace, if @code{nil} then do string replace.
address@hidden vip-search-wrap-around t
-If @code{t}, search wraps around the buffer.
address@hidden vip-re-search nil
-If @code{t} then search is reg-exp search, if @code{nil} then vanilla
-search.
address@hidden vip-case-fold-search nil
-If @code{t} search ignores cases.
address@hidden vip-re-query-replace nil
-If @code{t} then do reg-exp replace in query replace.
address@hidden vip-open-with-indent nil
-If @code{t} then indent to the previous current line when open a new line
-by @kbd{o} or @kbd{O} command.
address@hidden vip-tags-file-name "TAGS"
-The name of the file used as the tags table.
address@hidden vip-help-in-insert-mode nil
-If @code{t} then @key{C-h} is bound to @code{help-command} in insert mode,
-if @code{nil} then it sis bound to @code{delete-backward-char}.
address@hidden table
address@hidden
-You can reset these constants in VIP by the Ex command @kbd{set}. Or you
-can include a line like this in your @file{.vip} file:
address@hidden
-(setq vip-case-fold-search t)
address@hidden example
-
address@hidden Customizing Key Bindings,, Customizing Constants, Customization
address@hidden Customizing Key Bindings
-
address@hidden local keymap
-
-VIP uses @code{vip-command-mode-map} as the @dfn{local keymap} for vi mode.
-For example, in vi mode, @key{SPC} is bound to the function
address@hidden But, if you wish to make @key{SPC} and some other keys
- behave like Vi, you can include the following lines in your @file{.vip}
-file.
-
address@hidden
-(define-key vip-command-mode-map "\C-g" 'vip-info-on-file)
-(define-key vip-command-mode-map "\C-h" 'vip-backward-char)
-(define-key vip-command-mode-map "\C-m" 'vip-next-line-at-bol)
-(define-key vip-command-mode-map " " 'vip-forward-char)
-(define-key vip-command-mode-map "g" 'vip-keyboard-quit)
-(define-key vip-command-mode-map "s" 'vip-substitute)
-(define-key vip-command-mode-map "C" 'vip-change-to-eol)
-(define-key vip-command-mode-map "R" 'vip-change-to-eol)
-(define-key vip-command-mode-map "S" 'vip-substitute-line)
-(define-key vip-command-mode-map "X" 'vip-delete-backward-char)
address@hidden example
-
address@hidden GNU Free Documentation License,,, Top
address@hidden GNU Free Documentation License
address@hidden doclicense.texi
-
-
address@hidden Key Index
-
address@hidden ky
-
address@hidden Concept Index
address@hidden cp
-
address@hidden odd
address@hidden
address@hidden
-
address@hidden
- arch-tag: 7c5d17b9-1d21-4261-a88a-b9fdbbf1020b
address@hidden ignore