[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to compile
From: |
Adrian Robert |
Subject: |
[Emacs-diffs] Changes to compile |
Date: |
Thu, 17 Jul 2008 18:29:01 +0000 |
CVSROOT: /sources/emacs
Module name: emacs
Changes by: Adrian Robert <arobert> 08/07/17 18:28:58
Index: compile
===================================================================
RCS file: compile
diff -N compile
--- compile 16 Jul 2008 02:15:12 -0000 1.3
+++ /dev/null 1 Jan 1970 00:00:00 -0000
@@ -1,243 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2008 Free Software Foundation, Inc.
-
-# This file is part of GNU Emacs.
-
-# GNU Emacs is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# GNU Emacs is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
-
-
-# This script configures and builds Emacs to the subdirectory ./build .
-#
-# If --shared-lisp 'install_prefix' is given, lisp files will be installed to
-# install_prefix/share/emacs/23.0.0. This option must be run with 'sudo'.
-#
-# Otherwise (default) lisp will be installed under
Emacs.app/Contents/Resources.
-# It does this by configuring it to install there, and running "make install".
-#
-# Some setup is different for GNUstep vs. Cocoa, and it determines which one
-# it's on using 'uname'.
-
-# After it is run, Emacs can be run directly from the .app, which itself
-# can be placed anywhere.
-
-# Further C development can be done using Xcode on OS X (not tested recently),
-# or by typing './remake' in the '../src' directory. Further Lisp
-# development can be done by either copying the files you modify
-# into install location, or running this script again.
-
-
-# Set up path and config variables.
-
-PREFIX=""
-while [ $# -gt 0 ]; do
- case "$1" in
- --shared-lisp=*)
- PREFIX=`echo "$1" | sed s/--shared-lisp=//`
- shift
- ;;
- --enable-local-lisp-path=*)
- locallisppath=`echo "$1" | sed s/--enable-local-lisp-path=//`
- shift
- ;;
- *)
- echo "Usage: $0 [--shared-lisp='install_root'
--enable-local-lisp-path='some path(s)']"
- exit
- esac
-done
-
-DISTDIR=`pwd`/..
-
-#OPTFLAGS='-g -O2'
-OPTFLAGS='-g'
-
-# MAC OS X
-if [ `uname` == "Darwin" ]; then
- BASEDIR=`pwd`/build/Emacs.app/Contents
- BINDIR=${BASEDIR}/MacOS
- if [ "x$PREFIX" == "x" ]; then
- PREFIX=${BASEDIR}/Resources
- fi
-# If you want to try experimental enhanced Ctrl-g support, add to NS_CFG_OPTS:
-# --enable-cocoa-experimental-ctrl-g
-# (See bottom of USAGE.txt)
- NS_CFG_OPTS="--with-ns --without-x --without-freetype --prefix=${PREFIX}
--exec_prefix=${BASEDIR}/MacOS --libexecdir=${BASEDIR}/MacOS/libexec"
-# --enable-cocoa-experimental-ctrl-g"
-# MAKE="make -j3"
- steve=`/usr/sbin/sysctl hw.ncpu | awk '{print $NF}'`
- MAKE="make -j`expr $steve + 1`"
- export CC=gcc-4.0
- export MACOSX_DEPLOYMENT_TARGET=10.3
- export MACOSX_DEPLOYMENT_TARGET_ppc=10.3
- export MACOSX_DEPLOYMENT_TARGET_i386=10.4
- export CFLAGS="$OPTFLAGS -arch ppc -arch i386"
-# -universal -sdk /Developer/SDKs/MacOSX10.4u.sdk
-# -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk
-
-# GNUSTEP
-else
-
- # Currently must pass three dirs into Make process via environment
variables.
- source /etc/GNUstep/GNUstep.conf
- if [ "x$GNUSTEP_MAKEFILES" == "x" ]; then
- if [ "x$GNUSTEP_SYSTEM_ROOT" == "x" ]; then
- echo "Failed to obtain any useful information from
/etc/GNUstep/GNUstep.conf."
- echo "Please make sure GNUstep is installed on your system."
- exit
- fi
- GNUSTEP_MAKEFILES=${GNUSTEP_SYSTEM_ROOT}/Library/Makefiles
- GNUSTEP_SYSTEM_HEADERS=${GNUSTEP_SYSTEM_ROOT}/Library/Headers
- GNUSTEP_SYSTEM_LIBRARIES=${GNUSTEP_SYSTEM_ROOT}/Library/Libraries
- fi
- export GNUSTEP_MAKEFILES
- export GNUSTEP_SYSTEM_HEADERS
- export GNUSTEP_SYSTEM_LIBRARIES
-
- BASEDIR=`pwd`/build/Emacs.app
- BINDIR=${BASEDIR}
- if [ "x${PREFIX}" == "x" ]; then
- PREFIX=${BASEDIR}/Resources
- fi
- NS_CFG_OPTS="--with-ns --without-x --without-freetype --prefix=${PREFIX}
--exec-prefix=${BASEDIR} --libexecdir=${BASEDIR}/libexec"
-# --enable-cocoa-experimental-ctrl-g
-
- if [ "x$MAKE" == "x" ]; then
- if [ "`gmake 2>&1`" == "gmake: *** No targets specified and no makefile
found. Stop." ]; then
- MAKE=gmake
- else
- MAKE=make
- fi
- export MAKE
- CFLAGS="$OPTFLAGS"
- export CFLAGS
- fi
-
-# PENDING: Not sure why this is needed
- export
EMACSLOADPATH="${DISTDIR}/lisp:${DISTDIR}/lisp/emacs-lisp:${DISTDIR}/leim"
-fi
-
-# End variable setup.
-###############################################################################
-
-# Prepare a clean slate
-rm -fr build/Emacs.app
-
-# Configure if needed
-cd ..
-if [ ! -f Makefile ]; then
- echo "./configure ${NS_CFG_OPTS}"
-./configure <<EOF ${NS_CFG_OPTS}
-EOF
-# ./configure ${NS_CFG_OPTS}
- if [ $? != 0 ]; then
- echo "*** Configure run failed. ***"
- echo "Please examine the above output to determine what went wrong,"
- echo "edit this script (\'compile\') to fix it, and rerun."
- # These are written BEFORE the job is compete, then it won't get done
- # next time, causing errors about CTLau-b5, tsang-b5, PY, etc..
- rm -f leim/changed.misc leim/changed.tit
- exit 1
- fi
-fi
-
-# Pete's addition for local lisp load-path
-if [ "x$locallisppath" != "x" ]; then
- echo " * Local lisp path is being enabled"
- (cd src
- if [ -r epaths.h-orig ]; then
-# mv ../src/epaths.h-orig ../src/epaths.h
- echo "### src/epaths.h-orig already exists, no further change ###"
- else
- mv epaths.h epaths.h-orig
- printf "s,\(#define PATH_LOADSEARCH \"\),\\\1%s:,\n" "$
-{locallisppath}" > locallisppath.sed
- cat epaths.h-orig | sed -f locallisppath.sed > epaths.h
- rm locallisppath.sed
- fi)
-fi
-
-# Clean up to avoid DOC-xxx and emacs-xxx out-of-controlness
-rm -f ../etc/DOC-* ../src/emacs-*
-
-
-# Go (installs binaries to ./build/Emacs.app, lisp to there or PREFIX)
-echo "make install"
-$MAKE
-status=$?
-
-if [ -f src/epaths.h-orig ]; then
- mv src/epaths.h-orig src/epaths.h
-fi
-
-if [ $status != 0 ]; then
- echo "*** Compilation failed. ***"
- echo "Please examine the above output to determine what went wrong,"
- echo "edit the configure options in this script (\'compile\') to fix it,
and rerun."
-# rm -f leim/changed.misc leim/changed.tit
- exit 1
-fi
-
-$MAKE install
-if [ $? != 0 ]; then
- echo "*** Compilation succeeded, but .app assembly failed. ***"
- echo "Please examine the above output to determine what went wrong,"
- echo "edit the configure options in this script (\'compile\') to fix it,
and rerun."
-# rm -f leim/changed.misc leim/changed.tit
- exit 1
-fi
-
-# Move version stuff up to Resources
-cd ${BASEDIR}/Resources
-if [ -d share/emacs ]; then
- # clean up self-contained build
- mv -f share/emacs/*/* .
-fi
-
-if [ ! -d info ]; then
- # happens on GNUstep, not OS X
- mv -f share/info .
-fi
-rm -fr share
-
-# Get rid of .el.gz when .elc is present.. purists will complain, but this
-# knocks the app size down substantially.
-cd lisp
-#for f in `find . -name '*.elc' -print | sed -e s/.elc/.{el,el.gz}/`
-#do
-# rm -f $f
-#done
-
-# Bin cleanup
-cd $BINDIR/bin
-rm -f emacs emacs-23*
-
-# Move libexec stuff up, and link it from bin
-cd ../libexec
-mv -f emacs/*/*/* .
-rm -fr emacs
-cd ../bin
-ln -sf ../libexec/* .
-
-# On OS X, install the bundled ispell
-#if [ `uname` == "Darwin" ]; then
-# cd $DISTDIR
-# cp ispell-3.3.01/bin/ispell* ${BINDIR}/libexec
-# cp -R ispell-3.3.01/lib ${BINDIR}/libexec
-#fi
-
-echo ""
-echo "Build successful."
-echo ""
-
-# arch-tag: 1fda51a1-d908-4e60-ad5e-47ffbb39f18d
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Emacs-diffs] Changes to compile,
Adrian Robert <=