[Emacs-diffs] /srv/bzr/emacs/trunk r104029: Improve `doprnt' and its usage. (Bug#8545)

[Eli Zaretskii]

------------------------------------------------------------
revno: 104029
fixes bug(s): http://debbugs.gnu.org/8545
committer: Eli Zaretskii <address@hidden>
branch nick: trunk
timestamp: Wed 2011-04-27 21:15:29 +0300
message:
  Improve `doprnt' and its usage.  (Bug#8545)
  
   src/doprnt.c (doprnt): Make sure `format' is never accessed beyond
   `format_end'.  Remove support for %l as a conversion specifier.
   Don't use xrealloc.  Improve diagnostics when the %l size modifier
   is used.  Update the commentary.
   src/eval.c (verror): Simplify calculation of size_t.
   src/coding.c (Ffind_operation_coding_system): Fix diagnostic error
   messages.
modified:
  src/ChangeLog
  src/coding.c
  src/doprnt.c
  src/eval.c

=== modified file 'src/ChangeLog'
--- a/src/ChangeLog     2011-04-27 08:06:26 +0000
+++ b/src/ChangeLog     2011-04-27 18:15:29 +0000
@@ -1,3 +1,16 @@
+2011-04-27  Eli Zaretskii  <address@hidden>
+
+       Improve `doprnt' and its usage.  (Bug#8545)
+       * doprnt.c (doprnt): Make sure `format' is never accessed beyond
+       `format_end'.  Remove support for %l as a conversion specifier.
+       Don't use xrealloc.  Improve diagnostics when the %l size modifier
+       is used.  Update the commentary.
+
+       * eval.c (verror): Simplify calculation of size_t.
+
+       * coding.c (Ffind_operation_coding_system): Fix diagnostic error
+       messages.
+
 2011-04-27  Yoshiaki Kasahara  <address@hidden>  (tiny change)
 
        * buffer.c (init_buffer) [USE_MMAP_FOR_BUFFERS]: Adjust to aliasing

=== modified file 'src/coding.c'
--- a/src/coding.c      2011-04-26 06:17:52 +0000
+++ b/src/coding.c      2011-04-27 18:15:29 +0000
@@ -9282,14 +9282,15 @@
       || !NATNUMP (target_idx = Fget (operation, Qtarget_idx)))
     error ("Invalid first argument");
   if (nargs < 1 + XFASTINT (target_idx))
-    error ("Too few arguments for operation: %s",
+    error ("Too few arguments for operation `%s'",
           SDATA (SYMBOL_NAME (operation)));
   target = args[XFASTINT (target_idx) + 1];
   if (!(STRINGP (target)
        || (EQ (operation, Qinsert_file_contents) && CONSP (target)
            && STRINGP (XCAR (target)) && BUFFERP (XCDR (target)))
        || (EQ (operation, Qopen_network_stream) && INTEGERP (target))))
-    error ("Invalid %"pI"dth argument", XFASTINT (target_idx) + 1);
+    error ("Invalid argument %"pI"d of operation `%s'",
+          XFASTINT (target_idx) + 1, SDATA (SYMBOL_NAME (operation)));
   if (CONSP (target))
     target = XCAR (target);
 

=== modified file 'src/doprnt.c'
--- a/src/doprnt.c      2011-04-25 08:04:22 +0000
+++ b/src/doprnt.c      2011-04-27 18:15:29 +0000
@@ -55,7 +55,6 @@
    %s means print a string argument.
    %S is silently treated as %s, for loose compatibility with `Fformat'.
    %d means print a `signed int' argument in decimal.
-   %l means print a `long int' argument in decimal.
    %o means print an `unsigned int' argument in octal.
    %x means print an `unsigned int' argument in hex.
    %e means print a `double' argument in exponential notation.
@@ -65,22 +64,26 @@
    %c means print a `signed int' argument as a single character.
    %% means produce a literal % character.
 
-   A %-sequence may contain optional flag, width, and precision specifiers, as
-   follows:
-
-     %<flags><width><precision>character
-
-   where flags is [+ -0l], width is [0-9]+, and precision is .[0-9]+
+   A %-sequence may contain optional flag, width, and precision specifiers, and
+   a length modifier, as follows:
+
+     %<flags><width><precision><length>character
+
+   where flags is [+ -0], width is [0-9]+, precision is .[0-9]+, and length
+   modifier is l.
 
    The + flag character inserts a + before any positive number, while a space
-   inserts a space before any positive number; these flags only affect %d, %l,
-   %o, %x, %e, %f, and %g sequences.  The - and 0 flags affect the width
-   specifier, as described below.
+   inserts a space before any positive number; these flags only affect %d, %o,
+   %x, %e, %f, and %g sequences.  The - and 0 flags affect the width specifier,
+   as described below.  For signed numerical arguments only, the ` ' (space)
+   flag causes the result to be prefixed with a space character if it does not
+   start with a sign (+ or -).
 
-   The l (lower-case letter ell) flag is a `long' data type modifier: it is
-   supported for %d, %o, and %x conversions of integral arguments, and means
-   that the respective argument is to be treated as `long int' or `unsigned
-   long int'.  The EMACS_INT data type should use this modifier.
+   The l (lower-case letter ell) length modifier is a `long' data type
+   modifier: it is supported for %d, %o, and %x conversions of integral
+   arguments, must immediately preced the conversion specifier, and means that
+   the respective argument is to be treated as `long int' or `unsigned long
+   int'.  The EMACS_INT data type should use this modifier.
 
    The width specifier supplies a lower limit for the length of the printed
    representation.  The padding, if any, normally goes on the left, but it goes
@@ -166,7 +169,7 @@
   bufsize--;
 
   /* Loop until end of format string or buffer full. */
-  while (fmt != format_end && bufsize > 0)
+  while (fmt < format_end && bufsize > 0)
     {
       if (*fmt == '%') /* Check for a '%' character */
        {
@@ -178,7 +181,7 @@
          /* Copy this one %-spec into fmtcpy.  */
          string = fmtcpy;
          *string++ = '%';
-         while (1)
+         while (fmt < format_end)
            {
              *string++ = *fmt;
              if ('0' <= *fmt && *fmt <= '9')
@@ -188,7 +191,8 @@
                     %1.1000f and %1000.1f both might need 1000+ bytes.
                     Parse the width or precision, checking for overflow.  */
                  size_t n = *fmt - '0';
-                 while ('0' <= fmt[1] && fmt[1] <= '9')
+                 while (fmt < format_end
+                        && '0' <= fmt[1] && fmt[1] <= '9')
                    {
                      if (n >= SIZE_MAX / 10
                          || n * 10 > SIZE_MAX - (fmt[1] - '0'))
@@ -205,14 +209,15 @@
              else if (*fmt == 'l')
                {
                  long_flag = 1;
-                 if (!strchr ("dox", fmt[1]))
-                   /* %l as conversion specifier, not as modifier.  */
-                   break;
+                 fmt++;
+                 break;
                }
              else
                break;
              fmt++;
            }
+         if (fmt > format_end)
+           fmt = format_end;
          *string = 0;
 
          /* Make the size bound large enough to handle floating point formats
@@ -225,9 +230,8 @@
          if (size_bound > size_allocated)
            {
              if (big_buffer)
-               big_buffer = (char *) xrealloc (big_buffer, size_bound);
-             else
-               big_buffer = (char *) xmalloc (size_bound);
+               xfree (big_buffer);
+             big_buffer = (char *) xmalloc (size_bound);
              sprintf_buffer = big_buffer;
              size_allocated = size_bound;
            }
@@ -235,7 +239,8 @@
          switch (*fmt++)
            {
            default:
-             error ("Invalid format operation %%%c", fmt[-1]);
+             error ("Invalid format operation %%%s%c",
+                    long_flag ? "l" : "", fmt[-1]);
 
 /*         case 'b': */
            case 'l':
@@ -373,7 +378,7 @@
        char *save_bufptr = bufptr;
 
        do { *bufptr++ = *fmt++; }
-       while (--bufsize > 0 && !CHAR_HEAD_P (*fmt));
+       while (fmt < format_end && --bufsize > 0 && !CHAR_HEAD_P (*fmt));
        if (!CHAR_HEAD_P (*fmt))
          {
            bufptr = save_bufptr;

=== modified file 'src/eval.c'
--- a/src/eval.c        2011-04-26 11:26:05 +0000
+++ b/src/eval.c        2011-04-27 18:15:29 +0000
@@ -1994,8 +1994,7 @@
 {
   char buf[4000];
   size_t size = sizeof buf;
-  size_t size_max =
-    min (MOST_POSITIVE_FIXNUM, min (INT_MAX, SIZE_MAX - 1)) + 1;
+  size_t size_max =    min (MOST_POSITIVE_FIXNUM, SIZE_MAX);
   size_t mlen = strlen (m);
   char *buffer = buf;
   size_t used;