[Emacs-diffs] master a2e6ed3 1/8: reftex generate autoloads to non versioned file.

[Phillip Lord]

branch: master
commit a2e6ed34b60c10cd63070b417c1bbd9fce82df63
Author: Phillip Lord <address@hidden>
Commit: Phillip Lord <address@hidden>

    reftex generate autoloads to non versioned file.
    
    * lisp/Makefile.in: Add reftex-loaddefs to autogen files
    * lisp/textmodes/reftex.el: Remove autoloads.
    * lisp/textmodes/reftex-auc.el,lisp/textmodes/reftex-cite.el,
      lisp/textmodes/reftex-dcr.el,lisp/textmodes/reftex-global.el,
      lisp/textmodes/reftex-index.el,lisp/textmodes/reftex-parse.el,
      lisp/textmodes/reftex-ref.el,lisp/textmodes/reftex-sel.el,
      lisp/textmodes/reftex-toc.el: Update autoload file-local.
    * test/lisp/textmodes/reftex-tests.el: Add test of an autoloaded
      function.
---
 lisp/Makefile.in                    |    3 +-
 lisp/textmodes/reftex-auc.el        |    2 +-
 lisp/textmodes/reftex-cite.el       |    2 +-
 lisp/textmodes/reftex-dcr.el        |    2 +-
 lisp/textmodes/reftex-global.el     |    2 +-
 lisp/textmodes/reftex-index.el      |    2 +-
 lisp/textmodes/reftex-parse.el      |    2 +-
 lisp/textmodes/reftex-ref.el        |    2 +-
 lisp/textmodes/reftex-sel.el        |    2 +-
 lisp/textmodes/reftex-toc.el        |    2 +-
 lisp/textmodes/reftex.el            |  699 +----------------------------------
 test/lisp/textmodes/reftex-tests.el |   15 +
 12 files changed, 28 insertions(+), 707 deletions(-)

diff --git a/lisp/Makefile.in b/lisp/Makefile.in
index 2ad16ed..c1ad46d 100644
--- a/lisp/Makefile.in
+++ b/lisp/Makefile.in
@@ -87,7 +87,8 @@ AUTOGENEL = loaddefs.el \
        cedet/semantic/loaddefs.el \
        cedet/ede/loaddefs.el \
        cedet/srecode/loaddefs.el \
-       org/org-loaddefs.el
+       org/org-loaddefs.el \
+       textmodes/reftex-loaddefs.el
 
 # Set load-prefer-newer for the benefit of the non-bootstrappers.
 BYTE_COMPILE_FLAGS = \
diff --git a/lisp/textmodes/reftex-auc.el b/lisp/textmodes/reftex-auc.el
index bbad065..b2629a5 100644
--- a/lisp/textmodes/reftex-auc.el
+++ b/lisp/textmodes/reftex-auc.el
@@ -237,5 +237,5 @@ of ENTRY-LIST is a list of cons cells (\"MACRONAME\" . 
LEVEL).  See
 ;;; reftex-auc.el ends here
 
 ;; Local Variables:
-;; generated-autoload-file: "reftex.el"
+;; generated-autoload-file: "reftex-loaddefs.el"
 ;; End:
diff --git a/lisp/textmodes/reftex-cite.el b/lisp/textmodes/reftex-cite.el
index a35d411..b2229d5 100644
--- a/lisp/textmodes/reftex-cite.el
+++ b/lisp/textmodes/reftex-cite.el
@@ -1262,5 +1262,5 @@ created files in the variables 
`reftex-create-bibtex-header' or
 ;;; reftex-cite.el ends here
 
 ;; Local Variables:
-;; generated-autoload-file: "reftex.el"
+;; generated-autoload-file: "reftex-loaddefs.el"
 ;; End:
diff --git a/lisp/textmodes/reftex-dcr.el b/lisp/textmodes/reftex-dcr.el
index 60cb1f6..8601294 100644
--- a/lisp/textmodes/reftex-dcr.el
+++ b/lisp/textmodes/reftex-dcr.el
@@ -488,5 +488,5 @@ Calling this function several times find successive 
citation locations."
 ;;; reftex-dcr.el ends here
 
 ;; Local Variables:
-;; generated-autoload-file: "reftex.el"
+;; generated-autoload-file: "reftex-loaddefs.el"
 ;; End:
diff --git a/lisp/textmodes/reftex-global.el b/lisp/textmodes/reftex-global.el
index 15d42fe..94635c0 100644
--- a/lisp/textmodes/reftex-global.el
+++ b/lisp/textmodes/reftex-global.el
@@ -477,5 +477,5 @@ With no argument, this command toggles
 ;;; reftex-global.el ends here
 
 ;; Local Variables:
-;; generated-autoload-file: "reftex.el"
+;; generated-autoload-file: "reftex-loaddefs.el"
 ;; End:
diff --git a/lisp/textmodes/reftex-index.el b/lisp/textmodes/reftex-index.el
index 7e961e8..47ba14b 100644
--- a/lisp/textmodes/reftex-index.el
+++ b/lisp/textmodes/reftex-index.el
@@ -2119,5 +2119,5 @@ Does not do a save-excursion."
 ;;; reftex-index.el ends here
 
 ;; Local Variables:
-;; generated-autoload-file: "reftex.el"
+;; generated-autoload-file: "reftex-loaddefs.el"
 ;; End:
diff --git a/lisp/textmodes/reftex-parse.el b/lisp/textmodes/reftex-parse.el
index f571131..d27989a 100644
--- a/lisp/textmodes/reftex-parse.el
+++ b/lisp/textmodes/reftex-parse.el
@@ -1131,5 +1131,5 @@ When LEVEL is non-nil, increase section numbers on that 
level."
 ;;; reftex-parse.el ends here
 
 ;; Local Variables:
-;; generated-autoload-file: "reftex.el"
+;; generated-autoload-file: "reftex-loaddefs.el"
 ;; End:
diff --git a/lisp/textmodes/reftex-ref.el b/lisp/textmodes/reftex-ref.el
index df78447..3d44e5a 100644
--- a/lisp/textmodes/reftex-ref.el
+++ b/lisp/textmodes/reftex-ref.el
@@ -881,5 +881,5 @@ Optional prefix argument OTHER-WINDOW goes to the label in 
another window."
 ;;; reftex-ref.el ends here
 
 ;; Local Variables:
-;; generated-autoload-file: "reftex.el"
+;; generated-autoload-file: "reftex-loaddefs.el"
 ;; End:
diff --git a/lisp/textmodes/reftex-sel.el b/lisp/textmodes/reftex-sel.el
index 643dbfb..1948d9f 100644
--- a/lisp/textmodes/reftex-sel.el
+++ b/lisp/textmodes/reftex-sel.el
@@ -745,5 +745,5 @@ Cycle in reverse order if optional argument REVERSE is 
non-nil."
 ;;; reftex-sel.el ends here
 
 ;; Local Variables:
-;; generated-autoload-file: "reftex.el"
+;; generated-autoload-file: "reftex-loaddefs.el"
 ;; End:
diff --git a/lisp/textmodes/reftex-toc.el b/lisp/textmodes/reftex-toc.el
index bdae6e5..87f7944 100644
--- a/lisp/textmodes/reftex-toc.el
+++ b/lisp/textmodes/reftex-toc.el
@@ -1111,5 +1111,5 @@ always show the current section in connection with the 
option
 ;;; reftex-toc.el ends here
 
 ;; Local Variables:
-;; generated-autoload-file: "reftex.el"
+;; generated-autoload-file: "reftex-loaddefs.el"
 ;; End:
diff --git a/lisp/textmodes/reftex.el b/lisp/textmodes/reftex.el
index 84efa7a..b29a56a 100644
--- a/lisp/textmodes/reftex.el
+++ b/lisp/textmodes/reftex.el
@@ -70,7 +70,8 @@
 (require 'reftex-vars)
 
 
-;;; Autoloads - see end for automatic autoloads
+;;; Autoloads to ensure loading of support files when necessary
+(require 'reftex-loaddefs)
 
 ;; We autoload tons of functions from these files, but some have
 ;; a single function that needs to be globally autoloaded.
@@ -2394,702 +2395,6 @@ Your bug report will be posted to the AUCTeX bug 
reporting list.
 
 (setq reftex-tables-dirty t)  ; in case this file is evaluated by hand
 
-
-;;; Start of automatically extracted autoloads.
-
-;;;### (autoloads nil "reftex-auc" "reftex-auc.el" 
"cf606f7918831321cb46f254436dc66e")
-;;; Generated autoloads from reftex-auc.el
-
-(autoload 'reftex-arg-label "reftex-auc" "\
-Use `reftex-label', `reftex-reference' or AUCTeX's code to insert label arg.
-What is being used depends upon `reftex-plug-into-AUCTeX'.
-
-\(fn OPTIONAL &optional PROMPT DEFINITION)" nil nil)
-
-(autoload 'reftex-arg-cite "reftex-auc" "\
-Use `reftex-citation' or AUCTeX's code to insert a cite-key macro argument.
-What is being used depends upon `reftex-plug-into-AUCTeX'.
-
-\(fn OPTIONAL &optional PROMPT DEFINITION)" nil nil)
-
-(autoload 'reftex-arg-index-tag "reftex-auc" "\
-Prompt for an index tag with completion.
-This is the name of an index, not the entry.
-
-\(fn OPTIONAL &optional PROMPT &rest ARGS)" nil nil)
-
-(autoload 'reftex-arg-index "reftex-auc" "\
-Prompt for an index entry completing with known entries.
-Completion is specific for just one index, if the macro or a tag
-argument identify one of multiple indices.
-
-\(fn OPTIONAL &optional PROMPT &rest ARGS)" nil nil)
-
-(autoload 'reftex-plug-into-AUCTeX "reftex-auc" "\
-
-
-\(fn)" nil nil)
-
-(autoload 'reftex-toggle-plug-into-AUCTeX "reftex-auc" "\
-Toggle Interface between AUCTeX and RefTeX on and off.
-
-\(fn)" t nil)
-
-(autoload 'reftex-add-label-environments "reftex-auc" "\
-Add label environment descriptions to `reftex-label-alist-style'.
-The format of ENTRY-LIST is exactly like `reftex-label-alist'.  See there
-for details.
-This function makes it possible to support RefTeX from AUCTeX style files.
-The entries in ENTRY-LIST will be processed after the user settings in
-`reftex-label-alist', and before the defaults (specified in
-`reftex-default-label-alist-entries').  Any changes made to
-`reftex-label-alist-style' will raise a flag to the effect that
-the label information is recompiled on next use.
-
-\(fn ENTRY-LIST)" nil nil)
-
-(defalias 'reftex-add-to-label-alist 'reftex-add-label-environments)
-
-(autoload 'reftex-add-section-levels "reftex-auc" "\
-Add entries to the value of `reftex-section-levels'.
-The added values are kept local to the current document.  The format
-of ENTRY-LIST is a list of cons cells (\"MACRONAME\" . LEVEL).  See
-`reftex-section-levels' for an example.
-
-\(fn ENTRY-LIST)" nil nil)
-
-(autoload 'reftex-notice-new-section "reftex-auc" "\
-
-
-\(fn)" nil nil)
-
-;;;***
-
-;;;### (autoloads nil "reftex-cite" "reftex-cite.el" 
"7eaa61c05a6578999ea68f1be0fbcf49")
-;;; Generated autoloads from reftex-cite.el
-
-(autoload 'reftex-default-bibliography "reftex-cite" "\
-Return the expanded value of variable `reftex-default-bibliography'.
-The expanded value is cached.
-
-\(fn)" nil nil)
-
-(autoload 'reftex-bib-or-thebib "reftex-cite" "\
-Test if BibTeX or egin{thebibliography} should be used for the citation.
-Find the bof of the current file
-
-\(fn)" nil nil)
-
-(autoload 'reftex-get-bibfile-list "reftex-cite" "\
-Return list of bibfiles for current document.
-When using the chapterbib or bibunits package you should either
-use the same database files everywhere, or separate parts using
-different databases into different files (included into the mater file).
-Then this function will return the applicable database files.
-
-\(fn)" nil nil)
-
-(autoload 'reftex-pop-to-bibtex-entry "reftex-cite" "\
-Find BibTeX KEY in any file in FILE-LIST in another window.
-If MARK-TO-KILL is non-nil, mark new buffer to kill.
-If HIGHLIGHT is non-nil, highlight the match.
-If ITEM in non-nil, search for bibitem instead of database entry.
-If RETURN is non-nil, just return the entry and restore point.
-
-\(fn KEY FILE-LIST &optional MARK-TO-KILL HIGHLIGHT ITEM RETURN)" nil nil)
-
-(autoload 'reftex-end-of-bib-entry "reftex-cite" "\
-
-
-\(fn ITEM)" nil nil)
-
-(autoload 'reftex-parse-bibtex-entry "reftex-cite" "\
-Parse BibTeX ENTRY.
-If ENTRY is nil then parse the entry in current buffer between FROM and TO.
-If RAW is non-nil, keep double quotes/curly braces delimiting fields.
-
-\(fn ENTRY &optional FROM TO RAW)" nil nil)
-
-(autoload 'reftex-citation "reftex-cite" "\
-Make a citation using BibTeX database files.
-After prompting for a regular expression, scans the buffers with
-bibtex entries (taken from the \\bibliography command) and offers the
-matching entries for selection.  The selected entry is formatted according
-to `reftex-cite-format' and inserted into the buffer.
-
-If NO-INSERT is non-nil, nothing is inserted, only the selected key returned.
-
-FORMAT-KEY can be used to pre-select a citation format.
-
-When called with a `C-u' prefix, prompt for optional arguments in
-cite macros.  When called with a numeric prefix, make that many
-citations.  When called with point inside the braces of a `\\cite'
-command, it will add another key, ignoring the value of
-`reftex-cite-format'.
-
-The regular expression uses an expanded syntax: && is interpreted as `and'.
-Thus, `aaaa&&bbb' matches entries which contain both `aaaa' and `bbb'.
-While entering the regexp, completion on knows citation keys is possible.
-`=' is a good regular expression to match all entries in all files.
-
-\(fn &optional NO-INSERT FORMAT-KEY)" t nil)
-
-(autoload 'reftex-citep "reftex-cite" "\
-Call `reftex-citation' with a format selector `?p'.
-
-\(fn)" t nil)
-
-(autoload 'reftex-citet "reftex-cite" "\
-Call `reftex-citation' with a format selector `?t'.
-
-\(fn)" t nil)
-
-(autoload 'reftex-make-cite-echo-string "reftex-cite" "\
-Format a bibtex ENTRY for the echo area and cache the result.
-
-\(fn ENTRY DOCSTRUCT-SYMBOL)" nil nil)
-
-(autoload 'reftex-create-bibtex-file "reftex-cite" "\
-Create a new BibTeX database BIBFILE with all entries referenced in document.
-The command prompts for a filename and writes the collected
-entries to that file.  Only entries referenced in the current
-document with any \\cite-like macros are used.  The sequence in
-the new file is the same as it was in the old database.
-
-Entries referenced from other entries must appear after all
-referencing entries.
-
-You can define strings to be used as header or footer for the
-created files in the variables `reftex-create-bibtex-header' or
-`reftex-create-bibtex-footer' respectively.
-
-\(fn BIBFILE)" t nil)
-
-;;;***
-
-;;;### (autoloads nil "reftex-dcr" "reftex-dcr.el" 
"08fc5bd6c35f9d6ab4a6ad336d3769c0")
-;;; Generated autoloads from reftex-dcr.el
-
-(autoload 'reftex-view-crossref "reftex-dcr" "\
-View cross reference of macro at point.  Point must be on the KEY
-argument.  When at a `\\ref' macro, show corresponding `\\label'
-definition, also in external documents (`xr').  When on a label, show
-a locations where KEY is referenced.  Subsequent calls find additional
-locations.  When on a `\\cite', show the associated `\\bibitem' macro or
-the BibTeX database entry.  When on a `\\bibitem', show a `\\cite' macro
-which uses this KEY. When on an `\\index', show other locations marked
-by the same index entry.
-To define additional cross referencing items, use the option
-`reftex-view-crossref-extra'.  See also `reftex-view-crossref-from-bibtex'.
-With one or two C-u prefixes, enforce rescanning of the document.
-With argument 2, select the window showing the cross reference.
-AUTO-HOW is only for the automatic crossref display and is handed through
-to the functions `reftex-view-cr-cite' and `reftex-view-cr-ref'.
-
-\(fn &optional ARG AUTO-HOW FAIL-QUIETLY)" t nil)
-
-(autoload 'reftex-mouse-view-crossref "reftex-dcr" "\
-View cross reference of \\ref or \\cite macro where you click.
-If the macro at point is a \\ref, show the corresponding label definition.
-If it is a \\cite, show the BibTeX database entry.
-If there is no such macro at point, search forward to find one.
-With argument, actually select the window showing the cross reference.
-
-\(fn EV)" t nil)
-
-(autoload 'reftex-toggle-auto-view-crossref "reftex-dcr" "\
-Toggle the automatic display of crossref information in the echo area.
-When active, leaving point idle in the argument of a \\ref or \\cite macro
-will display info in the echo area.
-
-\(fn)" t nil)
-
-(autoload 'reftex-view-crossref-from-bibtex "reftex-dcr" "\
-View location in a LaTeX document which cites the BibTeX entry at point.
-Since BibTeX files can be used by many LaTeX documents, this function
-prompts upon first use for a buffer in RefTeX mode.  To reset this
-link to a document, call the function with a prefix arg.
-Calling this function several times find successive citation locations.
-
-\(fn &optional ARG)" t nil)
-
-;;;***
-
-;;;### (autoloads nil "reftex-global" "reftex-global.el" 
"5fdd9c2edced0882471f86baf4b4b234")
-;;; Generated autoloads from reftex-global.el
-
-(autoload 'reftex-create-tags-file "reftex-global" "\
-Create TAGS file by running `etags' on the current document.
-The TAGS file is also immediately visited with `visit-tags-table'.
-
-\(fn)" t nil)
-
-(autoload 'reftex-grep-document "reftex-global" "\
-Run grep query through all files related to this document.
-With prefix arg, force to rescan document.
-No active TAGS table is required.
-
-\(fn GREP-CMD)" t nil)
-
-(autoload 'reftex-search-document "reftex-global" "\
-Regexp search through all files of the current document.
-Starts always in the master file.  Stops when a match is found.
-To continue searching for next match, use command \\[tags-loop-continue].
-No active TAGS table is required.
-
-\(fn &optional REGEXP)" t nil)
-
-(autoload 'reftex-query-replace-document "reftex-global" "\
-Do `query-replace-regexp' of FROM with TO over the entire document.
-Third arg DELIMITED (prefix arg) means replace only word-delimited matches.
-If you exit (\\[keyboard-quit], RET or q), you can resume the query replace
-with the command \\[tags-loop-continue].
-No active TAGS table is required.
-
-\(fn &optional FROM TO DELIMITED)" t nil)
-
-(autoload 'reftex-find-duplicate-labels "reftex-global" "\
-Produce a list of all duplicate labels in the document.
-
-\(fn)" t nil)
-
-(autoload 'reftex-change-label "reftex-global" "\
-Run `query-replace-regexp' of FROM with TO in all macro arguments.
-Works on the entire multifile document.
-If you exit (\\[keyboard-quit], RET or q), you can resume the query replace
-with the command \\[tags-loop-continue].
-No active TAGS table is required.
-
-\(fn &optional FROM TO)" t nil)
-
-(autoload 'reftex-renumber-simple-labels "reftex-global" "\
-Renumber all simple labels in the document to make them sequentially.
-Simple labels are the ones created by RefTeX, consisting only of the
-prefix and a number.  After the command completes, all these labels will
-have sequential numbers throughout the document.  Any references to
-the labels will be changed as well.  For this, RefTeX looks at the
-arguments of any macros which either start or end in the string `ref'.
-This command should be used with care, in particular in multifile
-documents.  You should not use it if another document refers to this
-one with the `xr' package.
-
-\(fn)" t nil)
-
-(autoload 'reftex-save-all-document-buffers "reftex-global" "\
-Save all documents associated with the current document.
-The function is useful after a global action like replacing or renumbering
-labels.
-
-\(fn)" t nil)
-
-(autoload 'reftex-isearch-minor-mode "reftex-global" "\
-When on, isearch searches the whole document, not only the current file.
-This minor mode allows isearch to search through all the files of
-the current TeX document.
-
-With no argument, this command toggles
-`reftex-isearch-minor-mode'.  With a prefix argument ARG, turn
-`reftex-isearch-minor-mode' on if ARG is positive, otherwise turn it off.
-
-\(fn &optional ARG)" t nil)
-
-;;;***
-
-;;;### (autoloads nil "reftex-index" "reftex-index.el" 
"29cb6e91c2e06592053e9d543f30f0ea")
-;;; Generated autoloads from reftex-index.el
-
-(autoload 'reftex-index-selection-or-word "reftex-index" "\
-Put selection or the word near point into the default index macro.
-This uses the information in `reftex-index-default-macro' to make an index
-entry.  The phrase indexed is the current selection or the word near point.
-When called with one `C-u' prefix, let the user have a chance to edit the
-index entry.  When called with 2 `C-u' as prefix, also ask for the index
-macro and other stuff.
-When called inside TeX math mode as determined by the `texmathp.el' library
-which is part of AUCTeX, the string is first processed with the
-`reftex-index-math-format', which see.
-
-\(fn &optional ARG PHRASE)" t nil)
-
-(autoload 'reftex-index "reftex-index" "\
-Query for an index macro and insert it along with its arguments.
-The index macros available are those defined in `reftex-index-macro' or
-by a call to `reftex-add-index-macros', typically from an AUCTeX style file.
-RefteX provides completion for the index tag and the index key, and
-will prompt for other arguments.
-
-\(fn &optional CHAR KEY TAG SEL NO-INSERT)" t nil)
-
-(autoload 'reftex-index-complete-tag "reftex-index" "\
-
-
-\(fn &optional ITAG OPT-ARGS)" nil nil)
-
-(autoload 'reftex-index-select-tag "reftex-index" "\
-
-
-\(fn)" nil nil)
-
-(autoload 'reftex-index-complete-key "reftex-index" "\
-
-
-\(fn &optional TAG OPTIONAL INITIAL)" nil nil)
-
-(autoload 'reftex-index-show-entry "reftex-index" "\
-
-
-\(fn DATA &optional NO-REVISIT)" nil nil)
-
-(autoload 'reftex-display-index "reftex-index" "\
-Display a buffer with an index compiled from the current document.
-When the document has multiple indices, first prompts for the correct one.
-When index support is turned off, offer to turn it on.
-With one or two `C-u' prefixes, rescan document first.
-With prefix 2, restrict index to current document section.
-With prefix 3, restrict index to region.
-
-\(fn &optional TAG OVERRIDING-RESTRICTION REDO &rest LOCATIONS)" t nil)
-
-(autoload 'reftex-index-phrase-selection-or-word "reftex-index" "\
-Add current selection or word at point to the phrases buffer.
-When you are in transient-mark-mode and the region is active, the
-selection will be used - otherwise the word at point.
-You get a chance to edit the entry in the phrases buffer - finish with
-`C-c C-c'.
-
-\(fn ARG)" t nil)
-
-(autoload 'reftex-index-visit-phrases-buffer "reftex-index" "\
-Switch to the phrases buffer, initialize if empty.
-
-\(fn)" t nil)
-
-(autoload 'reftex-index-phrases-mode "reftex-index" "\
-Major mode for managing the Index phrases of a LaTeX document.
-This buffer was created with RefTeX.
-
-To insert new phrases, use
- - `C-c \\' in the LaTeX document to copy selection or word
- - `\\[reftex-index-new-phrase]' in the phrases buffer.
-
-To index phrases use one of:
-
-\\[reftex-index-this-phrase]     index current phrase
-\\[reftex-index-next-phrase]     index next phrase (or N with prefix arg)
-\\[reftex-index-all-phrases]     index all phrases
-\\[reftex-index-remaining-phrases]     index current and following phrases
-\\[reftex-index-region-phrases]     index the phrases in the region
-
-You can sort the phrases in this buffer with \\[reftex-index-sort-phrases].
-To display information about the phrase at point, use 
\\[reftex-index-phrases-info].
-
-For more information see the RefTeX User Manual.
-
-Here are all local bindings.
-
-\\{reftex-index-phrases-mode-map}
-
-\(fn)" t nil)
-
-;;;***
-
-;;;### (autoloads nil "reftex-parse" "reftex-parse.el" 
"7bfdcb2f040dbe9a08d2c38c005c8f21")
-;;; Generated autoloads from reftex-parse.el
-
-(autoload 'reftex-parse-one "reftex-parse" "\
-Re-parse this file.
-
-\(fn)" t nil)
-
-(autoload 'reftex-parse-all "reftex-parse" "\
-Re-parse entire document.
-
-\(fn)" t nil)
-
-(autoload 'reftex-do-parse "reftex-parse" "\
-Do a document rescan.
-When allowed, do only a partial scan from FILE.
-
-\(fn RESCAN &optional FILE)" nil nil)
-
-(autoload 'reftex-everything-regexp "reftex-parse" "\
-
-
-\(fn)" nil nil)
-
-(autoload 'reftex-all-document-files "reftex-parse" "\
-Return a list of all files belonging to the current document.
-When RELATIVE is non-nil, give file names relative to directory
-of master file.
-
-\(fn &optional RELATIVE)" nil nil)
-
-(autoload 'reftex-locate-bibliography-files "reftex-parse" "\
-Scan buffer for bibliography macros and return file list.
-
-\(fn MASTER-DIR &optional FILES)" nil nil)
-
-(autoload 'reftex-section-info "reftex-parse" "\
-Return a section entry for the current match.
-Careful: This function expects the match-data to be still in place!
-
-\(fn FILE)" nil nil)
-
-(autoload 'reftex-ensure-index-support "reftex-parse" "\
-When index support is turned off, ask to turn it on and
-set the current prefix argument so that `reftex-access-scan-info'
-will rescan the entire document.
-
-\(fn &optional ABORT)" nil nil)
-
-(autoload 'reftex-index-info-safe "reftex-parse" "\
-
-
-\(fn FILE)" nil nil)
-
-(autoload 'reftex-index-info "reftex-parse" "\
-Return an index entry for the current match.
-Careful: This function expects the match-data to be still in place!
-
-\(fn FILE)" nil nil)
-
-(autoload 'reftex-short-context "reftex-parse" "\
-Get about one line of useful context for the label definition at point.
-
-\(fn ENV PARSE &optional BOUND DERIVE)" nil nil)
-
-(autoload 'reftex-where-am-I "reftex-parse" "\
-Return the docstruct entry above point.
-Actually returns a cons cell in which the cdr is a flag indicating
-if the information is exact (t) or approximate (nil).
-
-\(fn)" nil nil)
-
-(autoload 'reftex-notice-new "reftex-parse" "\
-Hook to handshake with RefTeX after something new has been inserted.
-
-\(fn &optional N FORCE)" nil nil)
-
-(autoload 'reftex-what-macro-safe "reftex-parse" "\
-Call `reftex-what-macro' with special syntax table.
-
-\(fn WHICH &optional BOUND)" nil nil)
-
-(autoload 'reftex-what-macro "reftex-parse" "\
-Find out if point is within the arguments of any TeX-macro.
-The return value is either (\"\\macro\" . (point)) or a list of them.
-
-If WHICH is nil, immediately return nil.
-If WHICH is 1, return innermost enclosing macro.
-If WHICH is t, return list of all macros enclosing point.
-If WHICH is a list of macros, look only for those macros and return the
-  name of the first macro in this list found to enclose point.
-If the optional BOUND is an integer, bound backwards directed
-  searches to this point.  If it is nil, limit to nearest \\section -
-  like statement.
-
-This function is pretty stable, but can be fooled if the text contains
-things like \\macro{aa}{bb} where \\macro is defined to take only one
-argument.  As RefTeX cannot know this, the string \"bb\" would still be
-considered an argument of macro \\macro.
-
-\(fn WHICH &optional BOUND)" nil nil)
-
-(autoload 'reftex-what-environment "reftex-parse" "\
-Find out if point is inside a LaTeX environment.
-The return value is (e.g.) either (\"equation\" . (point)) or a list of
-them.
-
-If WHICH is nil, immediately return nil.
-If WHICH is 1, return innermost enclosing environment.
-If WHICH is t, return list of all environments enclosing point.
-If WHICH is a list of environments, look only for those environments and
-  return the name of the first environment in this list found to enclose
-  point.
-
-If the optional BOUND is an integer, bound backwards directed searches to
-this point.  If it is nil, limit to nearest \\section - like statement.
-
-\(fn WHICH &optional BOUND)" nil nil)
-
-(autoload 'reftex-what-special-env "reftex-parse" "\
-Run the special environment parsers and return the matches.
-
-The return value is (e.g.) either (\"my-parser-function\" . (point))
-or a list of them.
-
-If WHICH is nil, immediately return nil.
-If WHICH is 1, return innermost enclosing environment.
-If WHICH is t, return list of all environments enclosing point.
-If WHICH is a list of environments, look only for those environments and
-  return the name of the first environment in this list found to enclose
-  point.
-
-\(fn WHICH &optional BOUND)" nil nil)
-
-(autoload 'reftex-nth-arg "reftex-parse" "\
-Return the Nth following {} or [] parentheses content.
-OPT-ARGS is a list of argument numbers which are optional.
-
-\(fn N &optional OPT-ARGS)" nil nil)
-
-(autoload 'reftex-move-over-touching-args "reftex-parse" "\
-
-
-\(fn)" nil nil)
-
-(autoload 'reftex-init-section-numbers "reftex-parse" "\
-Initialize the section numbers with zeros or with what is found in the 
TOC-ENTRY.
-
-\(fn &optional TOC-ENTRY APPENDIX)" nil nil)
-
-(autoload 'reftex-section-number "reftex-parse" "\
-Return a string with the current section number.
-When LEVEL is non-nil, increase section numbers on that level.
-
-\(fn &optional LEVEL STAR)" nil nil)
-
-;;;***
-
-;;;### (autoloads nil "reftex-ref" "reftex-ref.el" 
"86c0a243e49d55bb33a32ddac613e189")
-;;; Generated autoloads from reftex-ref.el
-
-(autoload 'reftex-label-location "reftex-ref" "\
-Return the environment or macro which determines the label type at point.
-If optional BOUND is an integer, limit backward searches to that point.
-
-\(fn &optional BOUND)" nil nil)
-
-(autoload 'reftex-label-info-update "reftex-ref" "\
-
-
-\(fn CELL)" nil nil)
-
-(autoload 'reftex-label-info "reftex-ref" "\
-
-
-\(fn LABEL &optional FILE BOUND DERIVE ENV-OR-MAC)" nil nil)
-
-(autoload 'reftex-label "reftex-ref" "\
-Insert a unique label.  Return the label.
-If ENVIRONMENT is given, don't bother to find out yourself.
-If NO-INSERT is non-nil, do not insert label into buffer.
-With prefix arg, force to rescan document first.
-When you are prompted to enter or confirm a label, and you reply with
-just the prefix or an empty string, no label at all will be inserted.
-A new label is also recorded into the label list.
-This function is controlled by the settings of reftex-insert-label-flags.
-
-\(fn &optional ENVIRONMENT NO-INSERT)" t nil)
-
-(autoload 'reftex-reference "reftex-ref" "\
-Make a LaTeX reference.  Look only for labels of a certain TYPE.
-With prefix arg, force to rescan buffer for labels.  This should only be
-necessary if you have recently entered labels yourself without using
-reftex-label.  Rescanning of the buffer can also be requested from the
-label selection menu.
-The function returns the selected label or nil.
-If NO-INSERT is non-nil, do not insert \\ref command, just return label.
-When called with 2 C-u prefix args, disable magic word recognition.
-
-\(fn &optional TYPE NO-INSERT CUT)" t nil)
-
-(autoload 'reftex-query-label-type "reftex-ref" "\
-
-
-\(fn)" nil nil)
-
-(autoload 'reftex-show-label-location "reftex-ref" "\
-
-
-\(fn DATA FORWARD NO-REVISIT &optional STAY ERROR)" nil nil)
-
-(autoload 'reftex-goto-label "reftex-ref" "\
-Prompt for a label (with completion) and jump to the location of this label.
-Optional prefix argument OTHER-WINDOW goes to the label in another window.
-
-\(fn &optional OTHER-WINDOW)" t nil)
-
-;;;***
-
-;;;### (autoloads nil "reftex-sel" "reftex-sel.el" 
"faea36cbe37033efd3f9063187eef7ee")
-;;; Generated autoloads from reftex-sel.el
-
-(autoload 'reftex-select-label-mode "reftex-sel" "\
-Major mode for selecting a label in a LaTeX document.
-This buffer was created with RefTeX.
-It only has a meaningful keymap when you are in the middle of a
-selection process.
-To select a label, move the cursor to it and press RET.
-Press `?' for a summary of important key bindings.
-
-During a selection process, these are the local bindings.
-
-\\{reftex-select-label-mode-map}
-
-\(fn)" t nil)
-
-(autoload 'reftex-select-bib-mode "reftex-sel" "\
-Major mode for selecting a citation key in a LaTeX document.
-This buffer was created with RefTeX.
-It only has a meaningful keymap when you are in the middle of a
-selection process.
-In order to select a citation, move the cursor to it and press RET.
-Press `?' for a summary of important key bindings.
-
-During a selection process, these are the local bindings.
-
-\\{reftex-select-label-mode-map}
-
-\(fn)" t nil)
-
-(autoload 'reftex-get-offset "reftex-sel" "\
-
-
-\(fn BUF HERE-AM-I &optional TYPEKEY TOC INDEX FILE)" nil nil)
-
-(autoload 'reftex-insert-docstruct "reftex-sel" "\
-
-
-\(fn BUF TOC LABELS INDEX-ENTRIES FILES CONTEXT COUNTER SHOW-COMMENTED 
HERE-I-AM XR-PREFIX TOC-BUFFER)" nil nil)
-
-(autoload 'reftex-find-start-point "reftex-sel" "\
-
-
-\(fn FALLBACK &rest LOCATIONS)" nil nil)
-
-(autoload 'reftex-select-item "reftex-sel" "\
-
-
-\(fn REFTEX-SELECT-PROMPT HELP-STRING KEYMAP &optional OFFSET CALL-BACK 
CB-FLAG)" nil nil)
-
-;;;***
-
-;;;### (autoloads nil "reftex-toc" "reftex-toc.el" 
"db9b727d89e2a6ff01986e7c6aff1058")
-;;; Generated autoloads from reftex-toc.el
-
-(autoload 'reftex-toc "reftex-toc" "\
-Show the table of contents for the current document.
-When called with a raw C-u prefix, rescan the document first.
-
-\(fn &optional REBUILD REUSE)" t nil)
-
-(autoload 'reftex-toc-recenter "reftex-toc" "\
-Display the TOC window and highlight line corresponding to current position.
-
-\(fn &optional ARG)" t nil)
-
-(autoload 'reftex-toggle-auto-toc-recenter "reftex-toc" "\
-Toggle the automatic recentering of the TOC window.
-When active, leaving point idle will make the TOC window jump to the correct
-section.
-
-\(fn)" t nil)
-
-;;;***
-
-;;; End of automatically extracted autoloads.
-
 (provide 'reftex)
 
 ;;; reftex.el ends here
diff --git a/test/lisp/textmodes/reftex-tests.el 
b/test/lisp/textmodes/reftex-tests.el
index 962e39f..a7af58f 100644
--- a/test/lisp/textmodes/reftex-tests.el
+++ b/test/lisp/textmodes/reftex-tests.el
@@ -204,5 +204,20 @@
     (should (string= (reftex-format-citation entry "%l:%A:%y:%t %j %P %a")
                      "Foo13:Jane Roe:2013:Some Article Some Journal 1 Jane 
Roe, John Doe \\& Jane Taxpayer"))))
 
+
+;;; Autoload tests
+
+;; Test to check whether reftex autoloading mechanisms are working
+;; correctly.
+(ert-deftest reftex-autoload-auc ()
+  "Tests to see whether reftex-auc has been autoloaded"
+  (should
+   (fboundp 'reftex-arg-label))
+  (should
+   (autoloadp
+    (symbol-function
+     'reftex-arg-label))))
+
+
 (provide 'reftex-tests)
 ;;; reftex-tests.el ends here.